Tyco Safety Canada 173G9080 Cellular Alarm Communicator User Manual

Digital Security Controls Ltd. Cellular Alarm Communicator 05791248

a href="https://usermanual.wiki/Tyco-Safety-Canada" itemprop="url"> Tyco Safety Canada >

Users Manual

© 2017 Tyco Fire Protection Products. All rights reserved. Specifications and other information shown were current as of publication and are subject to change without notice.TYCO, SIMPLEX, and the product names listed in this material are marks and/or registered marks. Unauthorized use is strictly prohibited.579-1248Rev. 6RIntroduction This guide describes how to install the optional Connected Services Gateway Cellular Module, antenna and antenna extensions. There are two cellular modules available that connect to different cellular networks, AT&T 3G and Verizon LTE. The AT&T 3G cellular module requires one antenna. The Verizon LTE module requires two antennae. In cases with poor signal strength at the Fire Alarm Control Unit (FACU), you may need to move the antenna to another location with improved network coverage using an extension kit.Related documentationYou may need to consult the following additional documentation:•Connected Services Gateway Module installation guide 579-1247•Connected Services Gateway External Box installation guide 579-1249• ES Programmer Manual 579-849• 4007ES Programmer Manual 579-1167In this publicationTopic PageCautions, warnings, and regulatory information  2Overview 5Installing the cellular module 7Antenna mounting guidelines  8Mounting the antenna  9Connected Services Gateway Cellular Module installation guide
2Connected Services Gateway Cellular Module installation guideFCC MODIFICATION STATEMENTDigital Security Controls has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment.Digital Security Controls n’approuve aucune modification apportée à l’appareil par l’utilisateur, quelle qu’en soit la nature. Tout changement ou modification peuvent annuler le droit d’utilisation de l’appareil par l’utilisateur.ISED CANADA INTERFERENCE STATEMENTThis device complies with Part 15 of the FCC Rules and ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'ISED Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, ême si le brouillage est susceptible d'en compromettre le fonctionnement.FCC CLASS B DIGITAL DEVICE NOTICEThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.- Consult the dealer or experienced radio/television technician for help.CAN ICES-3 (B) / NMB-3 (B)READ AND SAVE THESE INSTRUCTIONS - Follow the instructions in this installation manual. These instructions must be followed to avoid damage to this product and associated equipment. Product operation and reliability depend upon proper installation.DO NOT INSTALL ANY SIMPLEX® PRODUCT THAT APPEARS DAMAGED - Upon unpacking your Simplex product, inspect the contents of the carton for shipping damage. If damage is apparent, immediately file a claim with the carrier and notify an authorized Simplex product supplier.ELECTRICAL HAZARD - Disconnect electrical field power when making any internal adjust-ments or repairs. All repairs should be performed by a representative or authorized agent of your local Simplex product supplier.STATIC HAZARD - Static electricity can damage components. Handle as follows:• Ground yourself before opening or installing components.• Prior to installation, keep components wrapped in anti-static material at all times.Cautions, warnings, and regulatory information
Download:
Mirror Download [FCC.gov]
Document ID3430884
Application IDhrWL32vZX/L1uzPRH/LznA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize103.41kB (1292600 bits)
Date Submitted2017-06-19 00:00:00
Date Available2017-06-19 00:00:00
Creation Date2012-07-10 11:54:15
Producing SoftwareAcrobat Distiller 11.0 (Windows)
Document Lastmod2017-06-19 13:47:16
Document Title05791248.fm
Document CreatorFrameMaker 12.0
Document Author: Lev Mikhail Netroussov
FCC ID Filing: F53173G9080

Navigation menu