UBS Axcera LU100AT 100-Watt UHF Transmitter User Manual

UBS-Axcera 100-Watt UHF Transmitter 377400

a href="https://usermanual.wiki/UBS-Axcera" itemprop="url"> UBS Axcera >

Chapter 1

UHF Analog Driver/Transmitter    Chapter 1, Introduction LX Series, Rev. 0    1-1 Chapter 1 Introduction  This manual explains the installation, setup, alignment, and maintenance procedures for the Innovator LX Series UHF analog modular driver/transmitter.  It is important that you read all of the instructions, especially the safety information in this chapter, before you begin to install or operate the unit.  1.1 Manual Overview  This instruction manual is divided into five chapters and supporting appendices. Chapter 1, Introduction, contains information on the assembly numbering system used in the manual, safety, maintenance, return procedures, and warranties. The second chapter describes the driver/transmitter and includes discussions on system control and status indicators and remote control connections. Chapter 3 explains how to unpack, install, setup, and operate the driver/transmitter. Chapter 4 contains circuit-level descriptions for boards and board-level components in the driver/transmitter. Chapter 5, Detailed Alignment Procedures, provides information on adjusting the system assemblies for optimal operation. The appendices contain assembly and subassembly drawings and parts lists, and system specifications.  1.2 Assembly Designators  Axcera has assigned assembly numbers, such as Ax (x=1,2,3…), to all assemblies, modules, and boards that are referenced in the text of this manual and shown on the block diagrams and interconnect drawings provided in the appendices. These supporting documents are arranged in increasing numerical order in the appendices. Section titles in the text for assembly or module descriptions or alignment procedures contain the associated part number(s) and the relevant appendix that contains the drawings for that item.   1.3 Safety  The UHF drivers and transmitters manufactured by Axcera are designed to be easy to use and repair while providing protection from electrical and mechanical hazards. Listed throughout the manual are notes, cautions, and warnings concerning possible safety hazards that may be encountered while operating or servicing the driver/transmitter. Please review these warnings and familiarize yourself with the operation and servicing procedures before working on the driver/transmitter.  Read All Instructions – All of the operating and safety instructions should be read and understood before operating this equipment.  Retain Manuals – The manuals for the driver/transmitter should be retained at the transmitter site for future reference. We provide two sets of manuals for this purpose; one set can be left at the office while one set can be kept at the site.  Heed all Notes, Warnings, and Cautions – All of the notes, warnings, and cautions listed in this safety section and throughout the manual must be followed.  Follow Instructions – All of the operating and use instructions for the driver/transmitter should be followed.  Cleaning – Unplug or otherwise disconnect all power from the equipment before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.  Ventilation – Openings in the cabinets and module front panels are provided for
Download:
Mirror Download [FCC.gov]
Document ID377403
Application IDQC713b4X7M+PFd56CshcQg==
Document DescriptionChapter 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatMicrosoft Word - pdf
Filesize34.98kB (437249 bits)
Date Submitted2003-12-02 00:00:00
Date Available2004-01-28 00:00:00
Creation Date2003-12-03 07:27:41
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2003-12-03 07:27:41
Document TitleMicrosoft Word - 377403.DOC
Document CreatorPScript5.dll Version 5.2
Document Author: fcc
FCC ID Filing: OUSLU100AT

Navigation menu