Ubee Interactive PXU1960 4G Mobile USB User Manual PXU1960 USB Modem User Information 1 6

Ubee Interactive Corp. 4G Mobile USB PXU1960 USB Modem User Information 1 6

Contents

User Manual - Statements

PXU1960 USB Modem “Device” by Ubee Interactive
User Information
General Precautions
Before installing the Device, it is recommended that all applications be closed.
Some electronic devices may be susceptible to electromagnetic interference. Place the Device away from devices
such as TVs, antennas, radios, and other electronic equipment to avoid electromagnetic interference.
This Device may interfere with medical devices such as hearing aids and pacemakers. Consult the manufacturer of
any medical device before using this Device.
This Device must only be used with accessories that have been approved by Clearwire. Unauthorized accessories may
affect the Device performance and/or void the Device warranty.
Do not attempt to take apart this Device as it does not contain user-serviceable parts. Any attempt to take apart this
Device will void the Device warranty.
Do not expose this Device to or immerse in any liquid.
Do not expose this Device to direct sunlight or extreme temperatures as this may shorten the Device lifespan.
This Device must be place in a ventilated environment. Do not place objects on top of this Device as it may lead to
overheating.
In order to comply with FCC RF exposure requirements, the Device should be installed so that a minimum separation
distance of 5mm is maintained between the device and antenna and all persons during normal operation.
Avoid contact with the antenna while the Device is in use.
The rubber antenna cover on this Device is a potential choking hazard. Please keep away from children.
Regulatory Approvals
IMPORTANT NOTE:
Radiation Exposure Statement:
The equipment must be installed and operated in accordance with provided instructions and must not be co-located or
operating in conjunction with any other antenna or transmitter. End users must be provided with antenna and transmitter
operating instructions for satisfying FCC RF exposure compliance requirements.
SAR compliance has been established and verified in typical laptop computer(s) with USB slots. Other applications such as
handheld PCs or similar devices have not been verified and may not be in compliance with related RF exposure rules, and
therefore, such use shall be prohibited.
Specific Absorption Rate (SAR) Value: Max 1.155 W/kg
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference and (2) this device must accept any interference received, including interference that may cause
undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
o Reorient or relocate the receiving antenna.
o Increase the separation between the equipment and receiver.
o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
o Consult the dealer or an experienced radio / TV technician for help.
The user is cautioned that changes or modifications not expressly approved by the manufacturer could void the user’s authority
to operate the equipment.
For further information, please visit www.ubeeinteractive.com

Navigation menu