Ubiquiti M2BW BULLET M2 User Manual BulletM2 HP Quick Start Guide
Ubiquiti Networks, Inc. BULLET M2 BulletM2 HP Quick Start Guide
Ubiquiti >
Contents
- 1. User Manual BM2-Ti
- 2. User Manual BulletM2-HP
User Manual BulletM2-HP
![](/img.php?id=3730761&img=bg1.png)
Zero-Variable Outdoor
airMAX® Radio
Model: BulletM2-HP
![](/img.php?id=3730761&img=bg2.png)
Introduction
Thank you for purchasing the Ubiquiti
Networks® Bullet™ M2. This Quick Start Guide is
designed to guide you through installation and
also includes warranty terms.
Package Contents
Zero-Variable Outdoor
airMAX® Radio
Model: BulletM2-HP
BulletM2-HP Compression
Seal
Quick Start
Guide
Installation Requirements
• Shielded Category 5 (or above) cabling with
drain wire should be used for all outdoor
wired Ethernet connections and should be
grounded through the AC ground of the PoE.
We recommend that you protect
your networks from harmful outdoor
environments and destructive ESD events
with industrial-grade, shielded Ethernet
cable from Ubiquiti Networks. For more
details, visit
www.ubnt.com/toughcable
• Surge protection should be used for all
outdoor installations. We recommend that
you use two Ethernet Surge Protectors,
model ETH-SP, one near the BulletM2-HP and
the other at the entry point to the building.
The ETH-SP will absorb power surges and
safely discharge them into the ground.
To LAN
To Antenna
ETH-SP
ES-8-150W
BulletM2-HP
ETH-SP
TERMS OF USE: Ubiquiti radio devices must be
professionally installed. Shielded Ethernet cable and
earth grounding must be used as conditions of product
warranty. TOUGHCable™ is designed for outdoor
installations. It is the professional installer’s responsibility
to follow local country regulations, including operation
within legal frequency channels, output power, and
Dynamic Frequency Selection (DFS) requirements.
![](/img.php?id=3730761&img=bg3.png)
Hardware Overview
Cable Gland
Body
Compression
Seal
Ethernet
Port
N-Type
Connector
LEDs
Ethernet Port 10/100 Ethernet port used to
connect the power and should be connected
to the LAN and DHCP server.
![](/img.php?id=3730761&img=bg4.png)
Hardware Installation
1. Unscrew the Cable Gland Body and detach
it from the Bullet.
2. Feed the Ethernet cable through the Cable
Gland Body.
3. Slip the Compression Seal around the cable.
4. Seat the CompressionSeal into the
CableGlandBody.
![](/img.php?id=3730761&img=bg5.png)
5. Connect the Ethernet cable to the port
located on the bottom of the Bullet.
6. Securely attach the Cable Gland Body onto
the Bullet. Ensure the Compression Seal is
securely compressed and tightly sealed
around the cable.
24V 1A PoE
M/N: BM5HP
RESET
![](/img.php?id=3730761&img=bg6.png)
*640-00371-01*
640-00371-01
7. Connect the Bullet to the N-Type
connector of the antenna.
![](/img.php?id=3730761&img=bg7.png)
Accessing airOS
Verify connectivity in the airOS® Configuration
Interface.
1. Make sure that your host machine is
connected via Ethernet to the device.
2. Configure the Ethernet adapter on your
host system with a static IP address on the
192.168.1.x subnet.
3. Launch your web browser and type
https://192.168.1.20 in the address field.
Press enter (PC) or return (Mac).
https://192.168.1.20
4. Enter ubnt in the Username and Password
fields. Select your Country and Language.
You must agree to the Terms of Use and the
Ubiquiti Firmware License Agreement to use
the product. Click Login.
Note:
The Country setting for U.S.
product versions is restricted to a
choice of Canada, Puerto Rico, or the
U.S. to ensure compliance with
FCC/IC regulations.
The airOS Configuration Interface will appear,
allowing you to customize your settings as
needed. For additional details on the airOS
Configuration Interface, refer to the User Guide
available at: www.ubnt.com/download/airmax
You can also manage your device using the
Ubiquiti Network Management System. Setup
using the UNMS™ app requires the U-Installer,
sold separately.
![](/img.php?id=3730761&img=bg8.png)
Installer Compliance Responsibility
Devices must be professionally installed and it
is the professional installer’s responsibility to
make sure the device is operated within local
country regulatory requirements.
The Output Power field is provided to the
professional installer to assist in meeting
regulatory requirements.
![](/img.php?id=3730761&img=bg9.png)
Specifications
BulletM2-HP
Dimensions 163.65 x 38.75 x 38.75 mm
(7.48 x 1.53 x 1.53")
Weight 130 g (4.59 oz)
Enclosure Polycarbonate
Networking Interface 10/100 Mbps
Operating Frequency
Worldwide
USA
2412 - 2472 MHz
2412 - 2462 MHz
Antenna Connector N-Type Connector
LEDs Power, Ethernet, (4) Signal
Strength
Max. Power
Consumption
7W
Output Power 25 dBm
Power Supply AC to 24VDC, 0.5A Gigabit
PoE Adapter*
Power Method 24V Passive PoE
(Pairs 4, 5+; 7, 8 Return)
ESD/EMP Protection ± 24 kV Contact / Air
Operating
Temperature
-40 to 70° C (-40 to 158° F)
Operating Humidity 5 to 95% Condensing
Shock and Vibration ETSI300-019-1.4
Certications CE, FCC, IC
* PoE Adapter not included with the BulletM2-HP.
![](/img.php?id=3730761&img=bga.png)
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories
specified by the manufacturer.
WARNING: Do not use this product
in a location that can be submerged
by water.
WARNING: Avoid using this product
during an electrical storm. There may
be a remote risk of electric shock from
lightning.
Electrical Safety Information
1. Compliance is required with respect
to voltage, frequency, and current
requirements indicated on the
manufacturer’s label. Connection to
a different power source than those
specified may result in improper operation,
damage to the equipment or pose a fire
hazard if the limitations are not followed.
2. There are no operator serviceable parts
inside this equipment. Service should
be provided only by a qualified service
technician.
Limited Warranty
UBIQUITI NETWORKS, Inc (“UBIQUITI
NETWORKS”) warrants that the product(s)
furnished hereunder (the “Product(s)”)
shall be free from defects in material and
workmanship for a period of one (1) year from
the date of shipment by UBIQUITI NETWORKS
under normal use and operation. UBIQUITI
NETWORKS’ sole and exclusive obligation and
liability under the foregoing warranty shall
be for UBIQUITI NETWORKS, at its discretion,
to repair or replace any Product that fails
to conform to the above warranty during
the above warranty period. The expense of
removal and reinstallation of any Product is not
included in this warranty. The warranty period
of any repaired or replaced Product shall not
extend beyond its original term.
Warranty Conditions
The above warranty does not apply if the
Product:
(I) has been modified and/or altered,
or an addition made thereto, except
by Ubiquiti Networks, or Ubiquiti
Networks’ authorized representatives,
or as approved by Ubiquiti Networks
in writing;
(II) has been painted, rebranded or
physically modified in any way;
(III) has been damaged due to errors or
defects in cabling;
(IV) has been subjected to misuse, abuse,
negligence, abnormal physical,
electromagnetic or electrical stress,
including lightning strikes, or accident;
(V) has been damaged as a result of using
third party firmware;
(VI) has no original Ubiquiti MAC label, or
is missing any other original Ubiquiti
label(s); or
(VII) has not been received by Ubiquiti within
30 days of issuance of the RMA.
In addition, the above warranty shall apply
only if: the product has been properly installed
and used at all times in accordance, and in
all material respects, with the applicable
Product documentation; all Ethernet cabling
runs use CAT5 (or above), and for outdoor
installations, shielded Ethernet cabling is used,
and for indoor installations, indoor cabling
requirements are followed.
Returns
No Products will be accepted for replacement
or repair without obtaining a Return Materials
Authorization (RMA) number from UBIQUITI
NETWORKS during the warranty period, and
the Products being received at UBIQUITI
NETWORKS’ facility freight prepaid in
accordance with the RMA process of UBIQUITI
NETWORKS. Products returned without an
RMA number will not be processed and will be
returned freight collect or subject to disposal.
Information on the RMA process and obtaining
an RMA number can be found at:
www.ubnt.com/support/warranty
Disclaimer
EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED
HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES,
AND ITS AND THEIR THIRD PARTY DATA, SERVICE,
SOFTWARE AND HARDWARE PROVIDERS HEREBY
DISCLAIM AND MAKE NO OTHER REPRESENTATION
OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED
OR STATUTORY, INCLUDING, BUT NOT LIMITED
TO, REPRESENTATIONS, GUARANTEES, OR
WARRANTIES OF MERCHANTABILITY, ACCURACY,
QUALITY OF SERVICE OR RESULTS, AVAILABILITY,
SATISFACTORY QUALITY, LACK OF VIRUSES,
QUIET ENJOYMENT, FITNESS FOR A PARTICULAR
PURPOSE AND NON-INFRINGEMENT AND ANY
WARRANTIES ARISING FROM ANY COURSE
OF DEALING, USAGE OR TRADE PRACTICE IN
CONNECTION WITH SUCH PRODUCTS AND
SERVICES. BUYER ACKNOWLEDGES THAT NEITHER
UBIQUITI NETWORKS NOR ITS THIRD PARTY
PROVIDERS CONTROL BUYER’S EQUIPMENT OR
THE TRANSFER OF DATA OVER COMMUNICATIONS
FACILITIES, INCLUDING THE INTERNET, AND
THAT THE PRODUCTS AND SERVICES MAY BE
SUBJECT TO LIMITATIONS, INTERRUPTIONS,
DELAYS, CANCELLATIONS AND OTHER PROBLEMS
INHERENT IN THE USE OF COMMUNICATIONS
FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES
AND ITS AND THEIR THIRD PARTY PROVIDERS ARE
NOT RESPONSIBLE FOR ANY INTERRUPTIONS,
DELAYS, CANCELLATIONS, DELIVERY FAILURES,
DATA LOSS, CONTENT CORRUPTION, PACKET
LOSS, OR OTHER DAMAGE RESULTING FROM
ANY OF THE FOREGOING. In addition, UBIQUITI
NETWORKS does not warrant that the operation
of the Products will be error-free or that operation
will be uninterrupted. In no event shall UBIQUITI
NETWORKS be responsible for damages or claims
of any nature or description relating to system
performance, including coverage, buyer’s selection
of products (including the Products) for buyer’s
application and/or failure of products (including
the Products) to meet government or regulatory
requirements.
Limitation of Liability
EXCEPT TO THE EXTENT PROHIBITED BY
LOCAL LAW, IN NO EVENT WILL UBIQUITI OR
ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS
BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL,
CONSEQUENTIAL OR OTHER DAMAGES
(INCLUDING LOST PROFIT, LOST DATA, OR
DOWNTIME COSTS), ARISING OUT OF THE
USE, INABILITY TO USE, OR THE RESULTS OF
USE OF THE PRODUCT, WHETHER BASED IN
WARRANTY, CONTRACT, TORT OR OTHER LEGAL
THEORY, AND WHETHER OR NOT ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
Note
Some countries, states and provinces do
not allow exclusions of implied warranties
or conditions, so the above exclusion may
not apply to you. You may have other rights
that vary from country to country, state
to state, or province to province. Some
countries, states and provinces do not allow
the exclusion or limitation of liability for
incidental or consequential damages, so
the above limitation may not apply to you.
EXCEPT TO THE EXTENT ALLOWED BY LOCAL
LAW, THESE WARRANTY TERMS DO NOT
EXCLUDE, RESTRICT OR MODIFY, AND ARE IN
ADDITION TO, THE MANDATORY STATUTORY
RIGHTS APPLICABLE TO THE LICENSE OF ANY
SOFTWARE (EMBEDDED IN THE PRODUCT)
TO YOU. The United Nations Convention on
Contracts for the International Sale of Goods
shall not apply to any transactions regarding
the sale of the Products.
Compliance
FCC
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions.
1. This device may not cause harmful
interference, and
2. This device must accept any interference
received, including interference that may
cause undesired operation.
This equipment has been tested and found
to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and,
if not installed and used in accordance with
the instruction manual, may cause harmful
interference to radio communications.
Operations of this equipment in a residential
area is likely to cause harmful interference in
which case the user will be required to correct
the interference at his own expense.
This radio transmitter (FCC: SWX-M2BW) has
been approved by FCC to operate with the
antenna types listed below with the maximum
permissible gain and required antenna
impedance for each antenna type indicated.
Antenna types not included in this list, having a
gain greater than the maximum gain indicated
for that type, are strictly prohibited for use with
this device.
Antenna Information: Gain, 13 dBi omni, 17 dBi
sector, 24 dBi dish
ISED Canada
CAN ICES-3(A)/NMB-3(A)
This device complies with ISED Canada licence-
exempt RSS standard(s). Operation is subject to
the following two conditions:
1. This device may not cause interference,
and
2. This device must accept any interference,
including interference that may cause
undesired operation of the device.
This radio transmitter (IC: 6545A-M2BW) has
been approved by ISED Canada to operate
with the antenna types listed below with
the maximum permissible gain and required
antenna impedance for each antenna type
indicated. Antenna types not included in this
list, having a gain greater than the maximum
gain indicated for that type, are strictly
prohibited for use with this device.
Antenna Information: Gain, 13 dBi omni, 17 dBi
sector, 24 dBi dish
![](/img.php?id=3730761&img=bgf.png)
CAN ICES-3(A)/NMB-3(A)
Le présent appareil est conforme aux CNR
d’ISDE Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée
aux deux conditions suivantes :
1. l’appareil ne doit pas produire de
brouillage;
2. l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le
fonctionnement.
Le présent émetteur radio (IC : 6545A-M2BW)
a été approuvé par ISDE Canada pour
l’exploitation avec l’antenne types énumérés
ci-dessous avec le gain maximal admissible et
requis l’impédance de l’antenne pour chaque
type d’antenne indiqué. Types d’antenne non
inclus dans cette liste, ayant un gain supérieur
au gain maximal indiqué pour ce type, sont
strictement interdits pour une utilisation avec
cet appareil.
Informations d’antenne : Gain, 13 dBi omni,
17dBi sector, 24 dBi dish
RF Exposure Warning
The antennas used for this transmitter must be
installed to provide a separation distance of at
least 20 cm from all persons and must not be
located or operating in conjunction with any
other antenna or transmitter.
Les antennes utilisées pour ce transmetteur
doivent être installé en considérant une
distance de séparation de toute personnes d’au
moins 20 cm et ne doivent pas être localisé ou
utilisé en conflit avec tout autre antenne ou
transmetteur.
Australia and New Zealand
Warning: This is a Class A product. In
a domestic environment this product
may cause radio interference in which
case the user may be required to take
adequate measures.
![](/img.php?id=3730761&img=bg10.png)
CE Marking
CE marking on this product represents the
product is in compliance with all directives that
are applicable to it.
Country List
AT BE BG CY CZ DE DK
EE EL ES FI FR HR HU
IE IT LV LT LU MT NL
PL PT RO SE SI SK UK
BFWA (Broadband Fixed Wireless Access)
members noted in blue
Note: This device meets Max. TX power
limit per ETSI regulations.
The following apply to products that operate in
the 5 GHz frequency range:
Note: Operation in the 5.8 GHz frequency
band is prohibited in BFWA (Broadband
Fixed Wireless Access) member states
noted in blue. Other countries listed may
use the 5.8 GHz frequency band.
Note: All countries listed may operate at
30 dBm. BFWA member states noted in
blue may operate at 36 dBm.
Note: The device is restricted to indoor
use only when operating in the
5150 - 5350 MHz frequency range within
all member states.
![](/img.php?id=3730761&img=bg11.png)
RoHS/WEEE Compliance Statement
English
European Directive 2012/19/EU requires that
the equipment bearing this symbol on the
product and/or its packaging must not be
disposed of with unsorted municipal waste. The
symbol indicates that this product should be
disposed of separately from regular household
waste streams. It is your responsibility to
dispose of this and other electric and electronic
equipment via designated collection facilities
appointed by the government or local
authorities. Correct disposal and recycling will
help prevent potential negative consequences
to the environment and human health. For
more detailed information about the disposal
of your old equipment, please contact your
local authorities, waste disposal service, or the
shop where you purchased the product.
Deutsch
Die Europäische Richtlinie 2012/19/EU
verlangt, dass technische Ausrüstung, die
direkt am Gerät und/oder an der Verpackung
mit diesem Symbol versehen ist, nicht
zusammen mit unsortiertem Gemeindeabfall
entsorgt werden darf. Das Symbol weist
darauf hin, dass das Produkt von regulärem
Haushaltmüll getrennt entsorgt werden sollte.
Es liegt in Ihrer Verantwortung, dieses Gerät
und andere elektrische und elektronische
Geräte über die dafür zuständigen und von
der Regierung oder örtlichen Behörden dazu
bestimmten Sammelstellen zu entsorgen.
Ordnungsgemäßes Entsorgen und Recyceln
trägt dazu bei, potentielle negative Folgen für
Umwelt und die menschliche Gesundheit zu
vermeiden. Wenn Sie weitere Informationen zur
Entsorgung Ihrer Altgeräte benötigen, wenden
Sie sich bitte an die örtlichen Behörden oder
städtischen Entsorgungsdienste oder an den
Händler, bei dem Sie das Produkt erworben
haben.
Español
La Directiva 2012/19/UE exige que los equipos
que lleven este símbolo en el propio aparato
y/o en su embalaje no deben eliminarse junto
con otros residuos urbanos no seleccionados.
El símbolo indica que el producto en cuestión
debe separarse de los residuos domésticos
convencionales con vistas a su eliminación.
Es responsabilidad suya desechar este y
cualesquiera otros aparatos eléctricos y
electrónicos a través de los puntos de recogida
que ponen a su disposición el gobierno
y las autoridades locales. Al desechar y
reciclar correctamente estos aparatos estará
contribuyendo a evitar posibles consecuencias
negativas para el medio ambiente y la salud
de las personas. Si desea obtener información
más detallada sobre la eliminación segura de
su aparato usado, consulte a las autoridades
locales, al servicio de recogida y eliminación
de residuos de su zona o pregunte en la tienda
donde adquirió el producto.
Français
La directive européenne 2012/19/UE exige que
l’équipement sur lequel est apposé ce symbole
sur le produit et/ou son emballage ne soit
pas jeté avec les autres ordures ménagères.
Ce symbole indique que le produit doit être
éliminé dans un circuit distinct de celui pour
les déchets des ménages. Il est de votre
responsabilité de jeter ce matériel ainsi que
tout autre matériel électrique ou électronique
par les moyens de collecte indiqués par le
gouvernement et les pouvoirs publics des
collectivités territoriales. L’élimination et le
recyclage en bonne et due forme ont pour
but de lutter contre l’impact néfaste potentiel
de ce type de produits sur l’environnement
et la santé publique. Pour plus d’informations
sur le mode d’élimination de votre ancien
équipement, veuillez prendre contact avec
les pouvoirs publics locaux, le service de
traitement des déchets, ou l’endroit où vous
avez acheté le produit.
Italiano
La direttiva europea 2012/19/UE richiede che
le apparecchiature contrassegnate con questo
simbolo sul prodotto e/o sull’imballaggio
non siano smaltite insieme ai rifiuti urbani
non differenziati. Il simbolo indica che questo
prodotto non deve essere smaltito insieme
ai normali rifiuti domestici. È responsabilità
del proprietario smaltire sia questi prodotti
sia le altre apparecchiature elettriche ed
elettroniche mediante le specifiche strutture
di raccolta indicate dal governo o dagli
enti pubblici locali. Il corretto smaltimento
ed il riciclaggio aiuteranno a prevenire
conseguenze potenzialmente negative per
l’ambiente e per la salute dell’essere umano.
Per ricevere informazioni più dettagliate circa
lo smaltimento delle vecchie apparecchiature
in Vostro possesso, Vi invitiamo a contattare
gli enti pubblici di competenza, il servizio di
smaltimento rifiuti o il negozio nel quale avete
acquistato il prodotto.
Declaration of Conformity
български [Bulgarian] С настоящото
UBIQUITI NETWORKS декларира, че този тип
радиосъоръжение BulletM2-HP е в съответствие
с Директива 2014/53/ЕС. Цялостният текст
на ЕС декларацията за съответствие може
да се намери на следния интернет адрес:
www.ubnt.com/compliance
Hrvatski [Croatian] UBIQUITI NETWORKS ovime
izjavljuje da je radijska oprema tipa BulletM2-HP
u skladu s Direktivom 2014/53/EU. Cjeloviti tekst
EU izjave o sukladnosti dostupan je na sljedećoj
internetskoj adresi:
www.ubnt.com/compliance
Čeština [Czech] Tímto UBIQUITI NETWORKS
prohlašuje, že typ rádiového zařízení BulletM2-HP je
v souladu se směrnicí 2014/53/EU. Úplné znění EU
prohlášení o shodě je k dispozici na této internetové
adrese:
www.ubnt.com/compliance
Dansk [Danish] Hermed erklærer UBIQUITI
NETWORKS, at radioudstyrstypen BulletM2-HP
er i overensstemmelse med direktiv
2014/53/EU. EU-overensstemmelseserklæringens
fulde tekst kan findes på følgende internetadresse:
www.ubnt.com/compliance
Nederlands [Dutch] Hierbij verklaar ik, UBIQUITI
NETWORKS, dat het type radioapparatuur
BulletM2-HP conform is met Richtlijn 2014/53/EU.
De volledige tekst van de EU-conformiteitsverklaring
kan worden geraadpleegd op het volgende
internetadres:
www.ubnt.com/compliance
English
Hereby, UBIQUITI NETWORKS declares
that the radio equipment type
BulletM2-HP
is
in compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity
is available at the following internet address:
www.ubnt.com/compliance
Eesti keel [Estonian] Käesolevaga deklareerib
UBIQUITI NETWORKS, et käesolev raadioseadme
tüüp BulletM2-HP vastab direktiivi 2014/53/EL
nõuetele. ELi vastavusdeklaratsiooni täielik tekst
on kättesaadav järgmisel internetiaadressil:
www.ubnt.com/compliance
Suomi [Finnish] UBIQUITI NETWORKS
vakuuttaa, että radiolaitetyyppi BulletM2-HP
on direktiivin 2014/53/EU mukainen.
EU-vaatimustenmukaisuusvakuutuksen
täysimittainen teksti on saatavilla seuraavassa
internetosoitteessa:
www.ubnt.com/compliance
Français [French] Le soussigné, UBIQUITI
NETWORKS, déclare que l’équipement
radioélectrique du type BulletM2-HP est
conforme à la directive 2014/53/UE. Le texte
complet de la déclaration UE de conformité
est disponible à l’adresse internet suivante:
www.ubnt.com/compliance
Deutsch [German] Hiermit erklärt UBIQUITI
NETWORKS, dass der Funkanlagentyp BulletM2-HP
der Richtlinie 2014/53/EU entspricht. Der
vollständige Text der EU-Konformitätserklärung
ist unter der folgenden Internetadresse verfügbar:
www.ubnt.com/compliance
Ελληνικά [Greek] Με την παρούσα ο/η UBIQUITI
NETWORKS, δηλώνει ότι ο ραδιοεξοπλισμός
BulletM2-HP πληροί την οδηγία 2014/53/ΕΕ. Το
πλήρες κείμενο της δήλωσης συμμόρφωσης
ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο
διαδίκτυο:
www.ubnt.com/compliance
Magyar [Hungarian] UBIQUITI NETWORKS igazolja,
hogy a BulletM2-HP típusú rádióberendezés
megfelel a 2014/53/EU irányelvnek. Az
EU-megfelelőségi nyilatkozat teljes szövege
elérhető a következő internetes címen:
www.ubnt.com/compliance
Íslenska [Icelandic] Hér með lýsir UBIQUITI
NETWORKS yfir því að BulletM2-HP er í samræmi
við grunnkröfur og aðrar kröfur, sem gerðar
eru í tilskipun 2014/53/EU. Fullur texti ESB
samræmisyfirlýsing er að finna á eftirfarandi
netfangi:
www.ubnt.com/compliance
Italiano [Italian] Il fabbricante, UBIQUITI
NETWORKS, dichiara che il tipo di apparecchiatura
radio BulletM2-HP èconforme alla direttiva
2014/53/UE. Il testo completo della dichiarazione
di conformità UE è disponibile al seguente indirizzo
Internet:
www.ubnt.com/compliance
Latviešu valoda [Latvian] Ar šo UBIQUITI
NETWORKS deklarē, ka radioiekārta BulletM2-HP
atbilst Direktīvai 2014/53/ES. Pilns ES atbilstības
deklarācijas teksts ir pieejams šādā interneta vietnē:
www.ubnt.com/compliance
Lietuvių kalba [Lithuanian] Aš, UBIQUITI
NETWORKS, patvirtinu, kad radijo įrenginių tipas
BulletM2-HP atitinka Direktyvą 2014/53/ES. Visas
ES atitikties deklaracijos tekstas prieinamas šiuo
interneto adresu:
www.ubnt.com/compliance
Malti [Maltese]
B’dan, UBIQUITI NETWORKS,
niddikjara li dan it-tip ta’ tagħmir tar-radju
BulletM2-HP
huwa konformi mad-Direttiva
2014/53/UE. Id-dikjarazzjoni tal-konformità tista’ tiġi
kkonsultata minn www.ubnt.com/compliance
Norsk [Norwegian]
UBIQUITI NETWORKS erklærer
herved at utstyret
BulletM2-HP
er i samsvar med
de grunnleggende krav og øvrige relevante
krav i direktiv 2014/53/EU. Den fulle teksten til
EU-samsvarserklæringen er tilgjengelig på følgende
internettadresse: www.ubnt.com/compliance
Polski [Polish] UBIQUITI NETWORKS niniejszym
oświadcza, że typ urządzenia radiowego
BulletM2-HP jest zgodny z dyrektywą 2014/53/UE.
Pełny tekst deklaracji zgodności UE jest dostępny
pod następującym adresem internetowym:
www.ubnt.com/compliance
Português [Portuguese] O(a) abaixo assinado(a)
UBIQUITI NETWORKS declara que o presente
tipo de equipamento de rádio BulletM2-HP está
em conformidade com a Diretiva 2014/53/UE. O
texto integral da declaração de conformidade
está disponível no seguinte endereço de Internet:
www.ubnt.com/compliance
Română [Romanian] Prin prezenta, UBIQUITI
NETWORKS declară că tipul de echipamente radio
BulletM2-HP este în conformitate cu Directiva
2014/53/UE. Textul integral al declarației UE de
conformitate este disponibil la următoarea adresă
internet:
www.ubnt.com/compliance
Slovenčina [Slovak]
UBIQUITI NETWORKS
týmto
vyhlasuje, že rádiové zariadenie typu BulletM2-HP
je v súlade so smernicou 2014/53/EÚ. Úplné
EÚ vyhlásenie o zhode je k dispozícii na tejto
internetovej adrese:
www.ubnt.com/compliance
Slovenščina [Slovenian]
UBIQUITI NETWORKS
potrjuje, da je tip radijske opreme
BulletM2-HP
skladen z Direktivo 2014/53/EU. Celotno besedilo
izjave EU o skladnosti je na voljo na naslednjem
spletnem naslovu: www.ubnt.com/compliance
Español [Spanish] Por la presente, UBIQUITI
NETWORKS declara que el tipo de equipo
radioeléctrico BulletM2-HP es conforme con
la Directiva 2014/53/UE. El texto completo
de la declaración UE de conformidad está
disponible en la dirección Internet siguiente:
www.ubnt.com/compliance
Svenska [Swedish] Härmed försäkrar UBIQUITI
NETWORKS att denna typ av radioutrustning
BulletM2-HP överensstämmer med direktiv
2014/53/EU. Den fullständiga texten till
EU-försäkran om överensstämmelse finns på
följande webbadress:
www.ubnt.com/compliance
![](/img.php?id=3730761&img=bg18.png)
©2013-2017 Ubiquiti Networks, Inc. All rights
reserved. Ubiquiti, UbiquitiNetworks, the Ubiquiti
U logo, airMAX, airOS, Bullet, TOUGHCable and
UNMS are trademarks or registered trademarks of
UbiquitiNetworks, Inc. in the United States and
in other countries. All other trademarks are the
property of their respectiveowners.
www.ubnt.com
Ubiquiti Networks, Inc.
685 Third Avenue, 27th Floor
New York, NY 10017
USA
NB122817