Ubiquiti M2D Outdoor PtP Wireless Bridge User Manual user guide

Download:
Mirror Download [FCC.gov]
Document ID	1297839
Application ID	2BJGjbGKpLJ8l1haZ4VblA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	196.68kB (2458457 bits)
Date Submitted	2010-06-17 00:00:00
Date Available	2010-06-17 00:00:00
Creation Date	2010-05-21 08:17:31
Producing Software	Mac OS X 10.5.8 Quartz PDFContext
Document Lastmod	2010-05-21 08:17:31
Document Title	user guide
Document Creator	OmniGraffle Professional
Document Author:	Robert Pera

M2D
OEM Users Guide
TECH SPECS
SYSTEM INFORMATION
Processor Specs
Memory Information
Networking Interface
Atheros MIPS 24KC, 400MHz
32MB SDRAM, 8MB Flash
1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
REGULATORY / COMPLIANCE INFORMATION
FCC Part 15.247, IC RS210, CE
YES
OPERATING FREQUENCY
TX POWER SPECIFICATIONS
DataRate
Avg. TX
Tolerance
MCS0
23 dBm
+/-2dB
MCS1
23 dBm
+/-2dB
MCS2
23 dBm
+/-2dB
MCS3
23 dBm
+/-2dB
MCS4
22 dBm
+/-2dB
MCS5
20 dBm
+/-2dB
MCS6
19 dBm
+/-2dB
MCS7
18 dBm
+/-2dB
MCS8
23 dBm
+/-2dB
MCS9
23 dBm
+/-2dB
MCS10
23 dBm
+/-2dB
MCS11
23 dBm
+/-2dB
MCS12
22 dBm
+/-2dB
MCS13
20 dBm
+/-2dB
MCS14
19 dBm
+/-2dB
MCS15
18 dBm
+/-2dB
2412MHz-2462MHz
11n / Airmax
11n / AirMax
Wireless Approvals
RoHS Compliance
RX SPECIFICATIONS
DataRate
Sensitivity
MCS0
-94 dBm
MCS1
-93 dBm
MCS2
-90 dBm
MCS3
-89 dBm
MCS4
-86 dBm
MCS5
-83 dBm
MCS6
-77 dBm
MCS7
-74 dBm
MCS8
-93 dBm
MCS9
-91 dBm
MCS10
-89 dBm
MCS11
-87 dBm
MCS12
-84 dBm
MCS13
-79 dBm
MCS14
-78 dBm
MCS15
-75 dBm
Tolerance
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
PHYSICAL / ELECTRICAL / ENVIRONMENTAL
Enclosure Size
Weight
Enclosure Characteristics
Mounting Kit
Max Power Consumption
Power Supply
Power Method
Operating Temperature
Operating Humidity
Shock and Vibration
Antenna Gain
241x400x400 mm
135g (feed), 680g(bracket),750g(dish)
Outdoor UV Stabalized Plastic
Pole Mounting Kit included
5.5 Watts
24V Carrier POE Adapter Included (POE-24)
Passive Power over Ethernet (pairs 4,5+; 7,8 return)
-30C to 75C
5 to 95% Condensing
ETSI300-019-1.4
17dBi
COMPLIANCE INFORMATION
FCC
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to pro-vide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
The antennas used for this transmitter must be installed to provide a separation
distance of at least following from all users:
20cm
INDUSTRY CANADA
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.)
is not more than that permitted for successful communication.
The device has been designed to operate with the antennas listed below and having a
maximum gain of 25dBi. Antennas not included in this list or having a gain greater than
20dBi are strictly prohibited for use with this device. The required antenna impedance is
50 ohms.
This device must be professionally installed and is designed strictly for for outdoor pointto-point wireless links.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 3
PDF Version                     : 1.4
Title                           : user guide
Author                          : Robert Pera
Subject                         : 
Apple Keywords                  : 
Creator                         : OmniGraffle Professional
Producer                        : Mac OS X 10.5.8 Quartz PDFContext
Create Date                     : 2010:05:21 08:17:31Z
Modify Date                     : 2010:05:21 08:17:31Z

EXIF Metadata provided by EXIF.tools