unique electronic MS3392 MINI bluetooth barcode reader User Manual Bluetooth barcode reader s

Shenzhen Unique Electronic International Limited MINI bluetooth barcode reader Bluetooth barcode reader s

User Manual

Bluetooth Barcode Reader HID Mode for IOS
1
MS3392-H user manual
HID mode for IOS
1. Turn on the barcode reader, and read below barcodes sequence, the blue LED will flash rapidly.
2. Enable the bluetooth of IOS to pair with the barcode reader. After the pairing is successful, you
can use it with Notes/office files or other cursor blinking position. (Please follow the steps below)
Bluetooth Barcode Reader HID Mode for IOS
2
1Turn on the ipad, and find the bluetooth option.
2Enable bluetooth, and the ipad will search automatically. After the searching is finished, click
the scanners name to connect.
Bluetooth Barcode Reader HID Mode for IOS
3
3After the connection is successful, the blue LED on the scanner will be off. Then you can use it
with Notes/office files or other cursor blinking position.
Note: In android system, If the soft keyboard can not display, you need to switch the hardware
physical keyboard to OFF status. In IOS system, you can also click trigger button for four times to
hide and display soft keyboard for IOS.
Bluetooth Barcode Reader HID Mode for Windows
4
HID mode for Windows
1. Turn on the barcode reader, and read below barcodes sequence, the blue LED will flash rapidly.
2. Enable the bluetooth of Windows device to pair with the barcode reader. After the pairing is
successful, the blue LED on the scanner will be off. Please follow the steps below.
Bluetooth Barcode Reader HID Mode for Windows
5
1Find out the bluetooth option on the computer.
(2) Enable the bluetooth, and the Windows device will search automatically. After the searching is
finished, click the scanners name to connect.
Bluetooth Barcode Reader HID Mode for Windows
6
3After the connection is successful, the blue LED on the scanner will be off. Then you can use it
with Notes/office files or other cursor blinking position.
Bluetooth Barcode Reader SPP Mode for Windows
7
SPP mode for Windows
1. Turn on the barcode reader, and read below barcodes sequence, the blue LED will flash slowly.
2. Enable the bluetooth of Windows to pair with the barcode reader. The PIN number of SPP mode is
1234.
And now you need a software to help connection. Please download the test software for Serial port
from internet, then install the test software to your computer and run it. Please follow the steps
below:
Bluetooth Barcode Reader SPP Mode for Windows
8
(1) Please double click to open the software, choose “Serial Port”, you need to find out the COM port
first in the Device manager of computer, then select the COM port in the software, click “Open
Device”.
(2) Now the blue LED on the scanner will be off.
Bluetooth Barcode Reader SPP Mode for Windows
9
(3) After the connection is successful, you can scan barcode data into the dialog box .
Bluetooth Barcode Reader HID Mode for Android
10
HID mode for Android
1.Turn on the barcode reader, and read below barcodes sequence, the blue LED will flash rapidly.
Enable the bluetooth of Android device to pair with the barcode reader. After the pairing is
successful, the blue LED on the scanner will be off. Please follow the steps below.
Bluetooth Barcode Reader HID Mode for Android
11
(1)Find the bluetooth icon in setting, shown in “The 1st” picture. Click to enter and enable bluetooth,
and then the Android device will automatically search, shown in “The 2nd” picture.
The 1st The 2nd
(2)After the search is completed, click scanners name to connect, then “Bluetooth keyboard
connected” will display on the soft keyboard, and the blue LED on the scanner will be off, the
connection is successful, shown in “The 3rd” picture. Now, you can use it with Notes/office files or
other cursor blinking position, shown in “The 4th” picture.
The 3rd The 4th
Bluetooth Barcode Reader SPP Mode for Android
12
SPP mode for Android
Due to some Android device can’t support Bluetooth HID protocol very well. It can not connect
bluetooth scanner with HID mode. In general, Android support SPP protocol very well.
1. Turn on the barcode reader, and read below barcodes sequence, the blue LED will flash slowly.
2. Please download our BIM(Bluetooth Input Method) for android from our website, or get it from
our sales, then install BIM to your smartphone and run it. And then please follow the wizard to
connect barcode scanner to finish the connection. The PIN number of SPP mode is 1234.
After the connection is successful, the blue LED on the scanner will be off.
Bluetooth Barcode Reader Instruction for BIM
13
User manual for Bluetooth Input Method in Android device
(1) Install BIM .apk into Android device, run and use it, shown in “The 5th” picture.
(2) Click “SCAN”, select “BIM” in the pop-up window, shown in “The 6th” picture.
The 5th The 6th
(3) Now you have two methods to connect scanner, please follow the steps below:
Way 1: Scan the Mac address(QR code) on the scanner, shown in “The 7th” picture, after, you
will see “Scan is successful, please connect the bluetooth”, click “Ok”, shown in “The 8th” picture.
Bluetooth Barcode Reader Instruction for BIM
14
The 7th The 8th
Way 2: Click “Search” on the top right corner in “The 7rd” picture, and click search in pop-up
window, shown in “The 9th” picture, choose the scanners name to connect, shown as “The 10th”
picture.
The 9th The 10th
(4) Connection is successful, it will shown: “Activation successful”. shown in “The 11th” picture,
now you can scan the barcode to the text box or notepad, word..., shown in “The 12th” picture.
Bluetooth Barcode Reader Instruction for BIM
15
Note: If it doesn’t connect automatically, click “BT” in “The 7th” picture, and click “Connect”.
The 11th The 12th
(5) Shown as “The 13th” picture, click “Open”/ “Close” to turn on / off the virtual keys, you can
click on the white circle to scan barcode.
The 13th The 14th
(6) You can configure the barcode reader via the “Function” in the picture “The 13th”, shown as
“The 14th” picture.
Bluetooth Barcode Reader Instruction for BIM
16
Click “Scanner Setting”, you can set bluetooth name/prefix Character/suffix character/buzzer/output
model and sleep time of the barcode reader, please check “The 15th” picture.
The 15th The 16th
(7) SPP Bluetooth Name: Please click “SPP Bluetooth Name”, and enter the required set of
Bluetooth name in the pop-up window, then click “SUBMIT”, shown in “The 16th” picture.
(8) HID Bluetooth Name: The method is same as SPP Bluetooth Name.
The 17th The 18th
Bluetooth Barcode Reader Instruction for BIM
17
(9) Prefix character: Please click “Prefix Character” option in “The 15th” picture, and click”+” in the
pop-up window, shown in “The 17th” and “The 18th” picture. Now click the text-box behind
“CR”(CR is default setting of the product, please refer to the ASCII). Shown in “The 19th” picture.
The 19th The 20th
(10) Choose the symbol required, and enable Prefix, shown in “The 20th” picture, then click
“SUBMIT”, the setting is finished( the same method to set Suffix).
(11) Now you can scan barcode, shown in “The 21th” picture.
The 21th The 22th
Bluetooth Barcode Reader USB Mode
18
Note: The default suffixes are CR and LF, please put your suffix in front of the default suffix.
(12) Buzzer: Click “ Buzzer”, and choose the Volume required, shown in “The 22th” picture.
Note: When you configure the barcode reader, please keep the scanner is active mode, the
method is: click the scan button on the barcode reader every 2-3 seconds, but don’t read any
barcodes.
USB mode:
If you need to use a USB cable to connect the scanner, you need to set the output mode to USB mode.
Please scan the following two barcodes:
0 0 0 0 1 1 1 5
USB mode
This barcode scanner has five languages for your selection, and used in USB output mode. You need
to switch the computer input method to the same, please scan the barcodes below.
Bluetooth Barcode Reader Offline Mode
19
Offline mode:
You can use offline upload functionality, barcode data stored in the scanner can be uploaded to your
smartphone or computer via Bluetooth or USB.
Concrete implementation steps:
1. Scan “start offline state” and “Offline mode” barcodes as shown below to enter the offline
scanning. The data you scanned will be stored in the scanning device.
Bluetooth Barcode Reader Offline mode
20
1 0 6 7 0 1 1 1
Offline mode
2. The customer can connect to the computer through USB or Bluetooth interface or data terminal to
upload the data. If customers need to save the data stored in the file, open Note pad or similar
software to enter the data. If the customer wants to store data in a custom application (such as
submitted the barcode data into a application), refer the customer to the insertion point where you
want to enter the data in the dialog box. Then barcode data entry and online scanning are in the same
way. Customers can choose different speed to upload the data according to your application. There
are three different speeds for you: fast speed, middle speed and slow speed upload.
(1) Fast upload means upload data without time interval;
(2) Middle speed is to upload data the interval of 1 second;
(3) Slow upload refers to each interval of 3 seconds to upload the data.
Bluetooth Barcode Reader Offline mode
21
3. The customer can also scan the “Statistical number of stores” barcode to view the number of
stored barcode.
4. After the upload data, related applications will store the uploaded data. If the data stored in
scanner needs to clear, please scan the barcode below to clear the data.
5. After the above steps, scan “Stop offline state” barcode, ending the offline scanning stored
procedure.
Bluetooth Barcode Reader Barcode setting
22
Barcode setting
The barcode scanner can read different type of barcode, please scan the corresponding barcode to
set .
Barcode name
Enable
Disable
Aztec
Codabar
Codablock F
Code 11
Code 39
Code 39 Trioptic
Code 93
Bluetooth Barcode Reader Barcode setting
23
Code 128
Composite
Data Matrix Rectangle
Data Matrix Inverse
GS1 DataBar Limited
_
Int 2 of 5
All GS1 DataBar
Matrix 2 of 5
Bluetooth Barcode Reader Barcode setting
24
Maxicode
MSI Plessy
Micro PDF 417
OCR
NEC 2 of 5
PDF 417
Postal Codes
Australian Post
_
Postal Codes
Japan Post
_
Bluetooth Barcode Reader Barcode setting
25
Postal Codes KIX
_
Postal Codes Planet
_
Postal Codes Postnet
_
Postal Codes
Royal Mail
_
Postal Codes
Planet & Postnet
_
4-State CB
(Intelligent Mail)
_
QR Code
All QR Code
(Includes Micro QR)
_
Bluetooth Barcode Reader Barcode setting
26
Telepen
UPC
LED and buzzer descriptions:
LED and buzzer descriptions
Meaning of representative
Green light flashing(w/buzzer ringing)
Decode success
Green light flash continuously (scan standby)
Low battery alarm
Red light solid
In charge
Red light goes out (When charging)
Charging is complete
Green light flashes continuously
Scanning built-in battery anomaly
Blue light flashing
Enter the Bluetooth pairing mode
Blue light goes out (In bluetooth pairing mode)
Bluetooth link successful
Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.

Navigation menu