Universal Electronics 1160 Charter Spectrum Remote 2015 User Manual

Universal Electronics Inc Charter Spectrum Remote 2015

a href="https://usermanual.wiki/Universal-Electronics" itemprop="url"> Universal Electronics >

User Manual

MUG1160S-A1  Page 1  Charter Spectrum Remote Control User Guide URC1160 Image of remote line art  Getting Started: Install Batteries 1. Apply pressure with your thumb and slide the battery door for removal Show image of bottom of remote, indicating pressure point and slide direction 2. Insert 2 AA batteries.  Match the + and – marks. Show illustration of batteries in place 3. Slide the battery door back into place.   Show bottom of remote with battery door in place, include arrow for slide direction.  Setup Your Remote for a Charter WorldBox If you have a Charter WorldBox, the remote must be paired with the box.  If you do NOT have a WorldBox, proceed to PROGRAMMING YOUR REMOTE FOR ANY OTHER CABLE BOX.  To Pair the Remote to the WorldBox 1. Ensure that your TV and WorldBox are both powered-on and that you can view the video feed from the WorldBox on your TV. Show image of STB and TV connected and on 2. To pair the remote, simply point the remote at the WorldBox and press the OK key.  The Input key will begin blinking repeatedly.   Show image of remote pointed at the TV, transmitting data 3. A confirmation message should appear on the TV screen.  Follow the on-screen instructions to program the remote control for your TV and/or audio equipment as needed.    To Un-Pair the Remote to the WorldBox  If you wish to use the remote with a different cable box, follow these steps to un-pair it with your WorldBox.   1. Press and hold MENU and Nav Down keys simultaneously until the INPUT key blinks twice. Show remote with MENU and Nav Down keys highlighted  2. Press 9-8-7 digit keys.  The INPUT key will blink four times to confirm pairing has been disabled. Show remote digits with 9-8-7 highlighted in order.
MUG1160S-A1  Page 2  Programming Your Remote for Any Other Cable Box This section is for any cable box that is NOT a Charter WorldBox.  If you have a WorldBox, refer to the section above for remote pairing, following the on-screen instructions for any other remote programming.  Setup Remote to Control Cable Box Point your remote at your cable box and press MENU to test.  If the cable box responds, skip this step and proceed to PROGAMMING YOUR REMOTE FOR TV AND AUDIO CONTROL. 1. If your cable box is branded Motorola, Arris, or Pace: a. Press and hold MENU and the 2 digit key simultaneously until the INPUT key blinks twice. Show remote with MENU and 3 keys highlighted  2. If your cable box is branded Cisco, Scientific Atlanta, or Samsung: a. Press and hold MENU and the 3 digit key simultaneously until the INPUT key blinks twice. Show remote with MENU and 3 keys highlighted  Programming Your Remote for TV and Audio Control Setup for Popular TV Brands  This step covers setup for the most common TV brands.  If your brand is not listed, please proceed to SETUP USING DIRECT CODE ENTRY    1. Ensure that your TV is powered-on. Show TV with remote pointed at it. 2. Simultaneously press and hold MENU and OK keys on remote until the INPUT key blinks twice Show remote with MENU and OK keys highlighted 3. Find your TV brand in the chart below and note the digit that relates to your TV brand.  Press and hold down the digit key. Digit TV Brand 1 Insignia/Dynex 2 LG/Zenith 3 Panasonic 4 Philips/Magnavox 5 RCA/TCL 6 Samsung 7 Sharp 8 Sony 9 Toshiba 0 Vizio  4. Release the digit key when the TV turns off.  Setup is complete. Show remote pointed at TV, transmitting data and TV is off.
Download:
Mirror Download [FCC.gov]
Document ID2714088
Application IDRr2AE838kxlbZe/ID/gtZA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize44.34kB (554295 bits)
Date Submitted2015-08-13 00:00:00
Date Available2015-08-13 00:00:00
Creation Date2015-08-07 07:32:10
Producing SoftwareMicrosoft® Word 2013
Document Lastmod2015-08-07 07:32:10
Document TitleUser Manual
Document CreatorMicrosoft® Word 2013
Document Author: Kohanek, Jeff
FCC ID Filing: MG3-1160

Navigation menu