Verifone VX690BBT Bluetooth base User Manual

VeriFone Inc Bluetooth base

Users Manual

VeriFone Part Number DOC260-003-EN-A, Revision A.3VERIFONECONFIDENTIALREVISION A.1 VX 685/VX 690Installation Guide
All rights reserved. No part of the contents of this document may be reproduced or transmitted in any form without the writtenpermission of VeriFone, Inc.The information contained in this document is subject to change without notice. Although VeriFone has attempted to ensure theaccuracy of the contents of this document, this document may include errors or omissions. The examples and sample programs arefor illustration only and may not be suited for your purpose. You should verify the applicability of any example or sample programbefore placing the software into productive use. This document, including without limitation the examples and software programs, issupplied “As-Is.”VeriFone, Inc.2099 Gateway Place, Suite 600San Jose, CA, 95110 USAwww.verifone.comVeriFone Part Number DOC260-003-EN-A, Revision A.3VX 685/VX 690 Installation Guide© 2014 VeriFone, Inc.VeriFone, the VeriFone logo, VeriCentre, and Verix are registered trademarks of VeriFone. Other brand names ortrademarks associated with VeriFone’s products and services are trademarks of VeriFone, Inc. All other brand names and trademarks appearing in this manual are the property of their respective holders. Comments? Please e-mail all comments in this document to your local VeriFone Support Team.
VX 685/VX 690 INSTALLATION GUIDE 3VERIFONECONFIDENTIALREVISION A.3 CONTENTSPREFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Guide Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Acronym Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7CHAPTER 1Terminal Overview Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Exceptional Ease of Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Performance and Durability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Contactless Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Communication Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Differences Between VX 685 and VX 690 Terminals. . . . . . . . . . . . . . . . . . . . . 11CHAPTER 2Setup Selecting a Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Ease of Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Environmental Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Electrical Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Unpacking the Shipping Carton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Examining Terminal Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Examining the Connection Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Installing/Replacing Paper Roll. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Installing/Replacing SIM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Installing/Replacing MSAM Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Installing/Replacing the Micro SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Connecting Optional Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Battery Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Battery Behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Connecting the Terminal to Power Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Base Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Charging Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23BT Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Docking the Terminal on the Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Undocking the Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Creating Dial-up/Ethernet Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Using the Powered Serial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Connecting External Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Powering Up the Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273G, GPRS, and GPS Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28GPS Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283G/GPRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Bluetooth Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
4VX 685/VX 690 INSTALLATION GUIDEVERIFONECONFIDENTIALREVISION A.3 Performing a Wireless Transaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Using the Smart Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Using the Magnetic Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Performing a Contactless Smart Card Transaction . . . . . . . . . . . . . . . . . . . . . . 30CHAPTER 3Specifications Power Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Power Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31External Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Magnetic Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Primary Smart Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31SAM Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Peripheral Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32CHAPTER 4Maintenance andCleaning Additional Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Power Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Potentially Explosive Environments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Card Readers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34CHAPTER 5Service and Support Service Returns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Accessories and Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37CHAPTER 6TroubleshootingGuidelines Blank Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Keypad Does Not Respond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Transactions Fail To Process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
VX 685/VX 690 INSTALLATION GUIDE 5VERIFONECONFIDENTIALREVISION A.3 PREFACEThis guide is the primary source of information for setting up and installing the terminal. AudienceThis guide is useful to anyone installing and configuring the terminal.OrganizationThis guide is organized as follows:Chapter 1, Terminal Overview. Provides an overview of the terminal.Chapter 2, Setup. Explains setup and installation of the terminal, selecting a location, and establishing connections with other devices.Chapter 3, Specifications. Discusses power requirements and dimensions of the terminal.Chapter 4, Maintenance and Cleaning. Explains maintenance of the terminal.Chapter 5, Service and Support. Provides information on contacting your VeriFone service provider and information on how to order accessories or documentations from VeriFone.Chapter 6, Troubleshooting Guidelines. Provides troubleshooting guidelines should you encounter a problem in terminal installation and configuration.RelatedDocumentationTo learn more about the terminal, refer to the following set of documents:VX 690 Certifications and Regulations Sheet VPN - DOC260-001-ENVX 690 Quick Installation Guide VPN - DOC260-002-ENVX 690 Reference Guide VPN - DOC260-004-ENVerix eVo Volume I: Operating System Programmers ManualVPN - DOC00301Verix eVo Volume II: Operating System and Communication Programmers ManualVPN - DOC00302Verix eVo Volume III: Operating System Programming Tools Reference ManualVPN - DOC00303
PREFACEGuide Conventions6VX 685/VX 690 INSTALLATION GUIDEVERIFONECONFIDENTIALREVISION A.3 GuideConventionsVarious conventions are used to help you quickly identify special formatting.Table 1 describes these conventions and provides examples of their use.Table 1 Document ConventionsConvention Meaning ExampleBlue Text in blue indicates terms that are cross references.See Guide Conventions.Italics Italic typeface indicates book titles or emphasis.You must not use this unit underwater.The pencil icon is used to highlight important information.RS232-type devices do not work on the VX 685/VX 690 communication port.The caution symbol indicates hardware or software failure, or loss of data.The unit is not waterproof or dustproof, and is intended for indoor use only.The lighting symbol is used as a warning when bodily injury might occur.Due to risk of shock do not use the terminal near water.NOTECAUTIONWARNING
PREFACEGuide ConventionsVX 685/VX 690 INSTALLATION GUIDE 7VERIFONECONFIDENTIALREVISION A.3 Acronym DefinitionsAcronyms are used in place of the full definition. Table 2 presents acronyms and their definitions. Table 2 Acronym DefinitionsAcronym Definitions3DES Triple Data Encryption StandardAES Advanced Encryption Standard AlgorithmAPI Application Programming InterfaceARM Advanced RISC MachineBBM Battery Backed MemoryCAPK Certification Authority Public KeyCBC Cipher Block Chaining modeDEA/DES Data Encryption Algorithm/StandardDUKPT Derived Unique Key Per Transaction Method as defined in the VISA’s POS Equipment Requirement: PIN processing and Data Authentication, International Version 1.0, August 1988ECR Electronic Cash RegisterEMV Joint Europay, MasterCard and Visa StandardMAC Message Authentication CodeMMU Memory Management UnitMSAM Multiple Secure Access ModuleOS Operating SystemPIN Personal Identification NumberPOS Point-of-SaleRFID Radio Frequency Identification SAM Secure Access ModuleSC Smart Card (Integrated Chip Card)SD Secure DigitalSR Ship ReleaseSRAM Static Random Access MemoryUI User InterfaceUSB Universal Serial Bus
PREFACEGuide Conventions8VX 685/VX 690 INSTALLATION GUIDEVERIFONECONFIDENTIALREVISION A.3
VERIFONECONFIDENTIALREVISION A.3 VX 685/VX 690 INSTALLATION GUIDE 9CHAPTER 1Terminal OverviewThe terminal is a portable, battery-powered device designed to fit comfortably during handheld consumer-facing applications. It features a colored 3.5” QVGA display, touch screen, and backlit spill-resistant keypad. It supports a variety of communications technologies including 3G radio with GPS and Bluetooth® wireless technology.Figure 1 VX 685/VX 690 Terminal
TERMINAL OVERVIEWFeatures and Benefits10 VX 685/VX 690 INSTALLATION GUIDEVERIFONECONFIDENTIALREVISION A.3 Features andBenefitsThe terminal focuses on optimizing cost structure and providing better form factor. It provides the right combination of features and functions in a sleek, ergonomic device that fits in the palm of your hand. Exceptional Ease ofUse•Bold, ergonomic design is sleek, stylish, and lightweight for conveniently handing the unit to the consumer for PIN entry or other input.•Large 3.5” QVGA display for boundless application possibilities and easy readability under various lighting conditions.•Touchscreen for icon-based applications or electronic signature capture support.•Intuitive telco-style keypad with large, colored control keys and interchangeably detects key presses from tactile keypad and the touchscreen.•40 mm diameter paper roll with a trouble-free, drop-in, “clam shell” loading and dual tear bar that allow receipts to be torn in any direction.•Quiet and fast integrated thermal printer with a rear placement to maximize the user interface area.•Unidirectional magnetic stripe card reader with an extended blade for optimal card reading.Performance andDurability•Fast transactions due to powerful 400 mHz ARM11 processor.•High-capacity 3.7 V 2450mAh Li-ion battery.•Standard base for drop-and-go charging or optional full-featured base with spare battery charging. •USB ports for connection to supported USB peripherals.•Rounded corners and drop resistant to 3 feet on concrete floor to minimize breakage. •192 MB memory (128 MB flash, 64 MB RAM) with optional removable micro SD flash memory.Security•Incorporates tamper-detection circuitry to resist unauthorized intrusion and supports a broad spectrum of software-based security features.•PCI 3.X approved for debit and other PIN-based transactions.•EMV Level 1 Type Approval. •Supports reliable security available including SSL, VeriShield file authentication, and VeriShield Protect to help prevent fraud and other intrusions.ContactlessCapability•Advanced contactless architecture that future-proofs investment with a single contactless interface (SingleCl), SoftSAMs, and side-by-side application architecture. •On-screen tap zone (CTLS logo) for optimized user experience.
TERMINAL OVERVIEWDifferences Between VX 685 and VX 690 TerminalsVX 685/VX 690 INSTALLATION GUIDE 11VERIFONECONFIDENTIALREVISION A.3 •Contactless version accepts EMV and mag-stripe contactless payments as well as PIN-based transactionsCommunicationTechnology•3G/GPS: Long-range wireless payment for retailers that have no physical location limitations. •Bluetooth® : Simple, plug-and-play installation for locations that need short-range wireless capability.DifferencesBetween VX 685and VX 690TerminalsVX 685 and VX 685/VX 690 terminals are mostly identical and offer the same general benefits. It is important to know the differences in their intrinsic features.Table 3 Feature ComparisonFeatures VX 685 GPRS VX 685/VX 690 3G/BTProcessor 400 MHz Rev D SOC 400 MHz Rev D SOCOS Verix OS Verix OSMemory 64 MB SDRAM/128 MB Flash 64 MB SDRAM/128 MB FlashDisplay 3.5” QVGA 3.5” QVGATouchscreen Resistive type Capacitive TypeRadio GPRS (Cinterion BGS2-W) 3G (Cinterion PHS8-P)Bluetooth NA YesGPS NA YesMagnetic card reader Triple Track, bi-directional Triple track, bi-directionalSmart card reader ISO 7816, 1.8 V, 3 V, 5 V, synchronous and asynchronous cardsISO 7816, 1.8 V, 3 V, 5 V, synchronous and asynchronous cardsSAM slots 2 2SIM Single DualMicro SD NA YesAudio speaker NA YesUSB integrated 1 Host/client 1 Host/clientSecurity PCI 3.0 PCI 3.0CTLS NXP PN512 C2 NXP PN512 C2Printer 30 lps 30 lpsBattery 3.7 V DC/2450 mAh 3.7 V DC/2450 mAhPaper roll 40 mm 40 mmCharger 5 V DC/2.2 A 5 V DC/2.2 ADimension (mm) 163 x 78 x 52 163 x 78 x 52
TERMINAL OVERVIEWDifferences Between VX 685 and VX 690 Terminals12 VX 685/VX 690 INSTALLATION GUIDEVERIFONECONFIDENTIALREVISION A.3
VERIFONECONFIDENTIALREVISION A.3 VX 685/VX 690 INSTALLATION GUIDE 13CHAPTER 2SetupThis chapter describes the setup procedure for:•Selecting a Location.•Unpacking the Shipping Carton.•Examining Terminal Features.•Examining the Connection Port.•Installing/Replacing Paper Roll.•Installing/Replacing SIM Card.•Installing/Replacing MSAM Cards.•Installing/Replacing the Micro SD Card.•Connecting Optional Devices.•Battery Features.•Connecting the Terminal to Power Source.•Base Stations.•Powering Up the Base.•3G, GPRS, and GPS Support.•Bluetooth Support.•Using the Smart Card Reader.•Using the Magnetic Card Reader.•Performing a Contactless Smart Card Transaction.Selecting aLocationUse the following guidelines to select a location for the terminal.Ease of Use•Select a location convenient for both merchant and cardholder.•Select a flat support surface, such as a countertop or table.•Select a location near a power outlet, ECR, or computer connected to the terminal. For safety, do not string cables or cords across a walkway.EnvironmentalFactors•Do not use the unit where there is high heat, dust, humidity, moisture, or caustic chemicals or oils.
SETUPUnpacking the Shipping Carton14 VX 685/VX 690 INSTALLATION GUIDEVERIFONECONFIDENTIALREVISION A.3 •Keep the unit away from direct sunlight and anything that radiates heat, such as a stove or a motor.•Do not use the terminal outdoors.ElectricalConsiderations•Avoid using this product during electrical storms.•Avoid locations near electrical appliances or other devices that cause excessive voltage fluctuations or emit electrical noise (for example, air conditioners, electric motors, neon signs, high-frequency or magnetic security devices, or computer equipment).•Do not use the terminal near water or in moist conditions.Unpacking theShipping CartonOpen the shipping carton and carefully inspect its contents for possible tampering or shipping damage. The terminal is a secure product and any tampering can cause it to cease to function or to operate in an unsecured manner.To Unpack theShipping Carton 1Remove and inspect the contents of the shipping carton. The terminal ships in multiple configurations, the carton may include all or any of the following:•Terminal•Power pack•Paper roll•Ethernet cable•Telephone line cable2Remove all plastic wrapping from the terminal and components.3Remove the clear protective film from the display.4Save the shipping carton and packing material for future repacking or moving of the device.CAUTIONThe terminal is not waterproof or dustproof, and is intended for indoor use only. Any damage to the unit from exposure to rain or dust can void any warranty.WARNINGDue to risk of shock or damage, do not use the terminal near water, including a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool.WARNINGDo not use a unit that has been tampered with or damaged. The terminal comes equipped with tamper-evident labels. If a label or component appears damaged, please notify the shipping company and your VeriFone service provider immediately.
SETUPExamining Terminal FeaturesVX 685/VX 690 INSTALLATION GUIDE 15VERIFONECONFIDENTIALREVISION A.3 ExaminingTerminalFeaturesBefore you continue with the installation process, familiarize yourself with the terminal features: Figure 2 VX 685/VX 690 FeaturesFront PanelThe front panel offers the following features:•A touchscreen display.•A set of keys that include:•A 12-key, telephone-style keypad (keypads may vary in style).•Three color-coded function keys on the right side of the keypad (from top to bottom: CANCEL, CLEAR, ENTER).•A magnetic card reader, built into the right side. An icon shows the proper swipe direction, with the stripe facing down and towards the keypad.•A smart card reader, built into the unit’s front side. An icon indicates the proper card position and insertion direction. &$1&(/.(<&/($5.(<(17(5.(<0$*1(7,&&$5'5($'(560$57&$5'5($'(57(/(3+21(67</(.(<3$'49*$',63/$<728&+6&5((17+(50$/35,17(5
SETUPExamining the Connection Port16 VX 685/VX 690 INSTALLATION GUIDEVERIFONECONFIDENTIALREVISION A.3 Examining theConnection PortThe terminal has one primary micro USB port used for power and download.Figure 3 Micro USB Port on the TerminalInstalling/Replacing PaperRollA fast, quiet thermal printer is built into the terminal. Before you can process transactions that require a receipt or record, you must install a roll of thermal-sensitive paper in the printer. The ITP uses a roll of single-ply, thermal-sensitive paper 40 mm in diameter. A pink out-of-paper indicator line appears on the edge of the paper approximately 18 inches before the end of the roll. After this line appears, there is enough paper remaining on the roll to conclude at least one transaction. To Install/Replace aPaper Roll 1Gently pull the latch located on the bottom of the terminal to unlock the paper.2Gently lift the printer cover up and back. 3Remove any partial roll of paper in the printer tray.4Loosen the glued leading edge of the new roll of paper or remove the protective strip, if applicable. Unwind the paper roll past any glue residue.5Hold the roll so the paper feeds from the bottom of the roll when the terminal is inverted. CAUTIONPoor-quality paper can jam the printer and create excessive paper dust. To order high-quality VeriFone paper, refer to Accessories and Documentation. Store thermal paper in a dry, dark area. Handle thermal paper carefully. Impact, friction, temperature, humidity, and oils affect the color and storage characteristics of the paper. Never load a roll of paper with folds, wrinkles, tears, or holes at the edges in the print area.
SETUPInstalling/Replacing SIM CardVX 685/VX 690 INSTALLATION GUIDE 17VERIFONECONFIDENTIALREVISION A.3 6Drop the paper roll into the printer tray.Figure 4 Installing Paper Roll CoverInstalling/Replacing SIMCardVX 685 has a single SIM slot that enables communication to the network provider. VX 690 supports dual SIM. SIM slot 1 is preferred for single SIM use. When dual SIM is employed, it is ideal to use SIM cards from two different network providers. This allows the terminal to switch SIMs when it detects poor signal or no network.To Install/Replace aSIM Card 1Turn off the terminal.2Place the terminal upside down on a soft, clean surface to protect the lens from scratches. 3Lift the battery pack to expose the SIM slots.CAUTIONTo prevent damaging the print roller, always gently press down on the paper roll cover to close it.NOTEPosition the card’s gold contacts facing away from you, toward the unit. The card slot in the terminal has a set of contacts. The SIM card has a notch on one corner to ensure that it fits into the connector base in only one way.
SETUPInstalling/Replacing MSAM Cards18 VX 685/VX 690 INSTALLATION GUIDEVERIFONECONFIDENTIALREVISION A.3 4Align the card to match the embossed number and carefully sliding it into the slots until fully inserted.Figure 5 SIM Card InsertionTo replace, gently slide out the old SIM card before inserting a new SIM.Installing/Replacing MSAMCardsYou may need to install one or more multiple security access module (MSAM) cards or replace an old one.To Install/ReplaceMSAM Cards 1Power off the terminal.2Place the terminal face down on a soft, clean surface to protect the lens from scratches.3Remove the back cover of the unit.CAUTIONObserve standard precautions in handling electrostatically sensitive devices. Electrostatic discharge can damage the equipment. VeriFone recommends using a grounded anti-static wrist strap.
SETUPInstalling/Replacing MSAM CardsVX 685/VX 690 INSTALLATION GUIDE 19VERIFONECONFIDENTIALREVISION A.3 4Lift the battery pack to expose the SAM slots. The slots are loacted just below the micro SD card slot.Figure 6 SAM Slots5Carefully slide the cards one at a time into the slots until fully inserted.Figure 7 SAM InsertionTo replace, gently slide out the old SAM card before inserting a new one.NOTEPosition the card’s gold contacts facing away from you, toward the unit. The card slot in the terminal has a set of contacts. The MSAM card has a notch on one corner to ensure that it fits into the connector base in only one way.The terminal supports two SAM cards.
SETUPInstalling/Replacing the Micro SD Card20 VX 685/VX 690 INSTALLATION GUIDEVERIFONECONFIDENTIALREVISION A.3 Installing/Replacing theMicro SD CardVX 690 supports micro SD for additional memory. To Install/ReplaceMicro SD Card 1Turn off the terminal.2Place the terminal upside down on a soft, clean surface to protect the lens from scratches. 3Lift the battery pack to expose the micro SD card slot.4Insert the micro SD card into its slot. Figure 8 Inserting a Micro SD CardTo replace, gently slide out the old micro SD card, before inserting a new one.,/#+/0%.%$
SETUPConnecting Optional DevicesVX 685/VX 690 INSTALLATION GUIDE 21VERIFONECONFIDENTIALREVISION A.3 ConnectingOptionalDevicesThe terminal supports peripheral devices designed for use with electronic point-of-sale system such as biometric scanner and barcode reader.Figure 9 Connecting Peripheral Devices to the Terminal via the Micro USB Port Battery FeaturesThe terminal uses a single cell, 2450 mAh Li-ion battery (see Accessories and Documentation for ordering information). The internal logic of the battery prevents both overcharging and undercharging—a fault condition where the battery level goes well below the minimum acceptable charge and the battery becomes unusable.The battery has a safety circuit that prevents cell damage from overcharge, over-discharge, or overheating; and activates when the battery is left in an unused terminal for extended periods.•The battery is not customer changeable and therefore should not be disconnected and removed. •Li-ion batteries are not affected by shallow charging. When the terminal has no external power source or battery, the coin cell battery provides power to the security circuit.•Disconnecting and removing the battery, as well as unplugging the terminal power pack, reduce the life of the coin cell battery, which does not recharge and must be replaced when drained.•Conserve battery power by turning the terminal off when not in use.•Keep the Li-ion battery inserted in the terminal and power up the terminal periodically to check the battery charge. Do not let the battery charge fall CAUTIONBefore connecting any peripheral device, make sure that the terminal is not powered on. Reconnect the power cord only after you are finished connecting the peripheral device(s). For complete information about peripheral installation and use, refer to the user documentation supplied with those devices.""
SETUPConnecting the Terminal to Power Source22 VX 685/VX 690 INSTALLATION GUIDEVERIFONECONFIDENTIALREVISION A.3 below 10% for extended periods of time as this may permanently diminish the battery capacity. Recharge the battery by attaching the micro-USB end of the power pack to the terminal and plugging the other end of the power pack into a wall outlet.Battery BehaviorThe terminal shifts to power pack mode and starts up automatically when the terminal is connected to a non-battery power source, regardless of the battery charge state.Manual StartupHold the green key down for about 4 seconds until the terminal displays the startup screen. The time required to hold the green key down to power up the terminal is configurable (for more information, see the VX 690 Reference Guide, VPN DOC260-004-EN). The terminal lights up once power is on.Manual ShutdownHold the red key down for about 4 seconds until the terminal displays the shutdown verification screen. The time required to hold the red key down to shut down the terminal is configurable (for more information, see the VX 690 Reference Guide, VPN DOC260-004-EN).Connecting theTerminal toPower SourceThe terminal is either powered by an external power pack or the single cell Li-ion rechargeable battery, which can be charged in the terminal by the AC/DC power pack through the micro USB connector.When you have finished installing the necessary cards and/or optional devices, you are ready to connect the terminal to the power source.NOTEThe VeriFone copyright screen starts and displays a unique copyright screen once the terminal loads an application. However, DOWNLOAD NEEDED appears on screen after the initial VeriFone copyright screen if there is no available application in the terminal.WARNINGDo not connect the terminal to the power supply until all peripherals are attached.Using an incorrectly rated power supply can damage the unit or cause it not to work properly. Use only a power pack with P/N PWR260-001-XX-A. See Specifications for detailed power supply specifications.Do not plug the power pack into an outdoor outlet or operate the terminal outdoors. Also, disconnecting power during a transaction can cause unstored data files to be lost.NOTETo protect against possible damage caused by lightning strikes and electrical surges, VeriFone recommends installing a power surge protector.
SETUPBase StationsVX 685/VX 690 INSTALLATION GUIDE 23VERIFONECONFIDENTIALREVISION A.3 When the terminal has power and an application is loaded, the application starts after the initial VeriFone copyright screen. If no application is loaded, DOWNLOAD NEEDED appears on the display after the initial VeriFone copyright screen.To Connect theTerminal to the PowerSource1Insert the mini USB connector to the mini USB port found on the side of the terminal.2Plug the AC power cord into a wall outlet or power surge protector.Figure 10 Connecting To Power SourceBase StationsVeriFone ships variants of the base station for different markets. Your base may have a different configuration.Charging BaseA charging base to charge the terminal and provide a docking station when the terminal is not in use. The base can be positioned on a countertop.Figure 11 Charging Base
SETUPBase Stations24 VX 685/VX 690 INSTALLATION GUIDEVERIFONECONFIDENTIALREVISION A.3 BT BaseA base that supports power, dial-up, Ethernet, powered RS232, USB device connectivity, USB Host, and BT device.Figure 12 BT Base Apart from charging the battery, it allows the terminal to use dial and Ethernet options, support peripheral devices, download/debug tasks, and conduct transactions over Bluetooth.Docking theTerminal on theBaseThe terminal can be placed on the base when not in use. This ensures continuous charging of the battery.Figure 13 Docking the Terminal on the BaseTo Dock the Terminalon the Base 1Place the top portion of the terminal on the base. Ensure that the recess on the bottom of the terminal sits on top of the docking connector.
SETUPBase StationsVX 685/VX 690 INSTALLATION GUIDE 25VERIFONECONFIDENTIALREVISION A.3 Undocking theTerminalThe terminal can be taken from the base when in use. Gently lift the bottom part of the terminal from the base.Figure 14 Undocking the Terminal from the BaseCreating Dial-up/EthernetConnectionsThe terminal allows for dial-up and Ethernet connections for full back-up connectivity. To Create a Dial-UpConnection 1Connect the telephone cable to the communication port on the base. 2Route the other end of the cable directly to a telephone wall jack. This is a direct connection and the line is dedicated to the terminal.Figure 15 Direct Telephone Connection#/-%4(
SETUPBase Stations26 VX 685/VX 690 INSTALLATION GUIDEVERIFONECONFIDENTIALREVISION A.3 To Create an EthernetConnection 1Connect the Ethernet cable to the port on the base.2Route the other end of the cable directly to a data wall jack (or router/hub).Figure 16 Ethernet ConnectionUsing the PoweredSerialThe powered serial on the base can be used in debug options or downloading applications. To Connect to thePowered Serial 1Connect the RS 232 cable to the COM port on the base.2Route the other end of the cable to the PC.Figure 17 Connection to the COM Port#/-%4(#/-%4(23
SETUPPowering Up the BaseVX 685/VX 690 INSTALLATION GUIDE 27VERIFONECONFIDENTIALREVISION A.3 Connecting ExternalDevicesThe base supports peripheral devices such as electronic cash register, check reader, barcode reader, and biometric scanner through a serial connection. Micro-USB port is for PC connection and USB Host port is for USB flash drive.Figure 18 Connecting Peripheral DevicesTo ConnectPeripherals/ExternalDevices1Connect the micro USB/USB cable of the device to the micro USB/USB port of the base. 2For complete information about the peripheral installation and use, refer to the user documentation supplied with those devices.Powering Up theBaseUse the procedure below to connect the terminal to a power source.Figure 19 Connecting Terminal to Power SourceTo Power Up the Base 1Insert the micro USB plug into the micro USB port on the base.#/-%4(""56CAUTIONBefore connecting any peripheral device, remove the power cord from the terminal. Reconnect the power cord only after you are finished connecting the peripheral device(s). #/-%4(
SETUP3G, GPRS, and GPS Support28 VX 685/VX 690 INSTALLATION GUIDEVERIFONECONFIDENTIALREVISION A.3 2Plug the AC power cord into a wall outlet or a power surge protector.3G, GPRS, andGPS SupportThe terminal uses the Cinterion PHS8-P radio module. This module provides wireless connectivity using HSPA+ technology. The PHS8-P radio module is optimized for high bandwidth and allows a downlink speed of 14.4 Mbps and an uplink speed of 5.7 Mbps.GPS ReceiverThe Cinterion PHS8-P radio module on VX 690 integrates a GPS receiver that offers the full performance of GPS/A-GPS technology, allowing customers to implement geo-fencing applications.3G/GPRSAllows for a wider range of communication for wireless transaction payment using the available operator-provided 3G infrastructure.BluetoothSupportVX 690 uses the Bluetooth Base Station. Up to seven devices can be registered with the same communications device, but only one transaction may be undertaken at a time. It is recommended that not more than three terminals be paired with a base station.The terminal and the Bluetooth base station are both Class 1 Bluetooth devices providing secure radio communication up to 100 meters, unobstructed. The terminal may be registered (paired) with more than one base station. It must be paired to secure the communication. Using the standard menu options provided in Verix Commserver, the terminal may easily be switched among paired devices. Any number of terminals may be paired with a single base station but the base station is only able to relay a single transaction at any one time. When more than three terminals are required, it is recommended that additional base stations be suitably positioned on site to obtain maximum radio coverage.Performing aWirelessTransactionTo conduct a wireless transaction, ensure that the terminal is in optimal position for transmitting. Follow the onscreen instructions provided by the application.WARNINGUsing an incorrectly rated power supply can damage the unit or cause it not to work properly. Use only a power pack with P/N PWR260-001-XX-A. See Specifications for detailed power supply specifications.Do not plug the power pack into an outdoor outlet or operate the terminal outdoors. Also, disconnecting power during a transaction can cause unstored transaction data files to be lost.NOTEThe terminal can only communicate to a base station to which it is paired.
SETUPUsing the Smart Card ReaderVX 685/VX 690 INSTALLATION GUIDE 29VERIFONECONFIDENTIALREVISION A.3 Using the SmartCard ReaderThe smart card transaction procedure can vary depending on the application. Verify the proper procedure with your application provider before performing a smart card transaction.To Use the SmartCard Reader 1Position the smart card with the gold contacts facing upward.2Insert the card into the smart card reader slot in a smooth, continuous motion until it sets firmly.3Remove the card only when the display indicates the transaction is complete.Figure 20 Smart Card ReaderUsing theMagnetic CardReaderThe terminal has a magnetic card reader that uses a triple track stripe reader. This gives the unit greater reliability over a wide range of swipe speeds and operating environments.To Use the SmartCard Reader (Credit/Debit CardTransaction)1Position a magnetic card with the stripe in the card reader and facing the keypad.2Swipe it through the magnetic card reader starting from the top of the unit downward.Figure 21 Using the Magnetic Card Reader CAUTIONLeave the smart card in the card reader until the transaction is completed. Premature card removal can invalidate a transaction.
SETUPPerforming a Contactless Smart Card Transaction30 VX 685/VX 690 INSTALLATION GUIDEVERIFONECONFIDENTIALREVISION A.3 Performing aContactlessSmart CardTransactionThe terminal supports contactless transactions through an integrated contactless module. The terminal only becomes active for contactless smart card transactions when initialized by an application.To Perform aContactless SmartCard Transaction1Gently tap the card onto or hold the card (within 4 cm.) against the surface of the RFID canopy.2An activated LED visual on the display accompanied by a short beeping sound indicates a successful transaction. Figure 22 Contactless Smart Card TransactionNOTEDo not let metallic surfaces come in contact with the contactless module to ensure that it works properly.
VERIFONECONFIDENTIALREVISION A.3 VX 685/VX 690 INSTALLATION GUIDE 31CHAPTER 3SpecificationsThis chapter discusses power requirements, dimensions, and other specifications of the terminal.Power Rating•5 V DC, 2.2 APower Pack•PWR260-001-XX-A (varies per region)•UL/cUL, ITE listed, LPS power supply•Input rated: 100-240 V AC, 50/60 Hz•Output rated: 5 V DC, 2.2 A, 11 WTemperature•Operating temperature: -10 to 50 C (32 to 122 F)•Storage temperature: -20 to 70 C (-22 to 140 F)ExternalDimensions•Length: 173.25 mm (6.82 in.)•Width: 87 mm (3.43 in.)•Depth: 31.7 mm (1.25 in.)Weight•Unit weight: 0.27 kg (0.6 lbs.)•Shipping weight: 0.850 kg (1.9 lbs.)Processor•400 MHz Rev D SOCMemory•192 MB memory (128 MB flash, 64 MB RAM)Display•3.5” QVGA•supports up to 26 lines x 26 charactersMagnetic CardReader•Triple track (tracks 1, 2, 3), high coercivity, bi-directionalPrimary SmartCard•ISO 7816, 1.8 V, 3 V, 5 V •synchronous and asynchronous cards
SPECIFICATIONSSAM Card Reader32 VX 685/VX 690 INSTALLATION GUIDEVERIFONECONFIDENTIALREVISION A.3 SAM CardReaderThe terminals has 2 Security Access Modules (SAMs) Keypad•3 x 5 Secure Keypad Matrix •Keys can be simulated on touchscreenPeripheral PortsThe micro USB port on the terminal and on the base supports peripheral attachment such as USB flash, biometric scanner, and barcode reader. Micro USB to USB converter adaptor is used USB flash drive for application download and debugging.SecurityComplies to PCI 3.x plus country specifics.
VERIFONECONFIDENTIALREVISION A.3 VX 685/VX 690 INSTALLATION GUIDE 33CHAPTER 4Maintenance and CleaningYour terminal device is a product of superior design and craftsmanship and should be treated with care. It has no user-serviceable parts. The following suggestions will help you protect your warranty coverage.•Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, switch off the power, and allow the device to dry completely before replacing it.•Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.•Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.•Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.•Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.•Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. Use only a soft, clean, dry cloth for cleaning. •Do not paint the device. Paint can clog the moving parts and prevent proper operation.•Keep the device free from any small, loose items (such as paper clips, staples, or coins) that could accidentally get inside it through an opening, such as the SD card reader slot or the primary smart card reader slot.•Do not attempt to open the device other than as instructed in this guide. This device has security features that protect it from tampering. For example, if the device’s outer casing is opened, file content will be deleted.•These suggestions apply equally to your terminal device, or any of its attachments or accessories. If your device is not working properly, take it to the nearest authorized service facility for servicing or replacement. For your safety, have this device serviced only by a VeriFone-authorized service provider.
MAINTENANCE AND CLEANINGAdditional Safety Information34 VX 685/VX 690 INSTALLATION GUIDEVERIFONECONFIDENTIALREVISION A.3 AdditionalSafetyInformationThe following are additional information for your safety in using this device.Power AdapterUse only the power adapter that came with your device. Adapters for other electronic devices may look similar, but they may affect your device’s performance or damage it.PotentiallyExplosiveEnvironmentsDo not use this device in any area with a potentially explosive atmosphere, and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.Card ReadersDo not attempt to clean the card readers. Doing so can void any warranty. For card reader service, contact your VeriFone distributor or service provider.CAUTIONNever use thinner, trichloroethylene, or ketone-based solvents – they can deteriorate plastic or rubber parts. Do not spray cleaners or other solutions directly onto the keypad or display.
VERIFONECONFIDENTIALREVISION A.3 VX 685/VX 690 INSTALLATION GUIDE 35CHAPTER 5Service and SupportFor any problems on your terminal, contact your local VeriFone representative or service provider.For product service and repair information:•USA – VeriFone Service and Support Group, 1-800-834-4366, Monday - Friday, 8 A.M. - 8 P.M., eastern time.•International – Contact your VeriFone representative.Service ReturnsBefore returning the terminal to VeriFone, you must obtain a Merchandise Return Authorization (MRA) number. The following procedure describes how to return one or more terminals for repair or replacement (U.S. customers only).1Gather the following information from the printed labels on the bottom of each terminal to be returned:•Product ID, including the model and part number. For example, “VX 690”,“m260-xxx-xx”, and “PTID xxxxxxxx.”•Serial number (S/N xxx-xxx-xxx).2Obtain the MRA numbers by completing the following:•Call Verifone within the United States toll-free at 1-800-VeriFone and follow the automated menu options.•Select the MRA option from the automated message. The MRA department is open Monday–Friday, 8 A.M.–8 P.M., Eastern time.•Give the MRA representative the information gathered in Step 1.If the list of serial numbers is long, you can fax the list, along with the information gathered in Step 1, to the MRA department at 1-727-953-4172 (U.S.).•Address the fax clearly to the attention of the “VeriFone MRA Dept.” Include a telephone number where you can be reached and your fax number.•Complete the Inquiry Contact Form at http://www.verifone.com/aboutus/contact/contact_form.cfm.NOTEInternational customers, please contact your local VeriFone representative for assistance with your service, return, or replacement.
SERVICE AND SUPPORTAccessories and Documentation36 VX 685/VX 690 INSTALLATION GUIDEVERIFONECONFIDENTIALREVISION A.3 •Address the Subject box with to “VeriFone MRA Dept.”•Reference the model and part number in the Note box3Describe the problem(s).4Provide the shipping address where the repaired or replacement unit must be returned.5Keep a record of the following items:•Assigned MRA number(s).•VeriFone serial number assigned to the terminal you are returning for service or repair (serial numbers are located on the bottom of the unit.•Shipping documentation, such as air bill numbers used to trace the shipment.•Model(s) returned (model numbers are located on the VeriFone label on the bottom of the terminal). Accessories andDocumentationVeriFone produces accessories and documentation for the terminal. When ordering, please refer to the part number in the left column.VeriFone Online Store at www.store.verifone.com•USA – VeriFone Customer Development Center, 1-800-834-4366, Monday - Friday, 7 A.M. - 8 P.M., eastern time•International – Contact your VeriFone representativeBelow are accessories used with your terminal. Contact your VeriFone distributor to determine which of accessories fit your requirements.NOTEOne MRA number must be issued for each terminal you return to VeriFone, even if you are returning several of the same model.Table 4 Accessories and VPNsAccessory Part Number DescriptionPower pack PWR260-001-XX-A DC power pack universalPrinter paper PPR260-001-01-A 40 mmVeriFone cleaning Kit VPN 02746-01 Cleaning kitUSB host cable VPN CBL268-003-01-ASerial dongle VPN M267-D08-00Telephone line cable VPN CBL000-001-01-A 2.1-meter (7-foot) telephone line cable, black, with modular RJ11-type connectors)
SERVICE AND SUPPORTAccessories and DocumentationVX 685/VX 690 INSTALLATION GUIDE 37VERIFONECONFIDENTIALREVISION A.3 To learn more about the terminal, refer to the following set of documents:VX 690 Certifications and Regulations Sheet VPN - DOC260-001-ENVX 690 Quick Installation Guide VPN - DOC260-002-ENVX 690 Reference Guide VPN - DOC260-004-ENVerix eVo Volume I: Operating System Programmers ManualVPN - DOC00301Verix eVo Volume II: Operating System and Communication Programmers ManualVPN - DOC00302Verix eVo Volume III: Operating System Programming Tools Reference ManualVPN - DOC00303
SERVICE AND SUPPORTAccessories and Documentation38 VX 685/VX 690 INSTALLATION GUIDEVERIFONECONFIDENTIALREVISION A.3
VERIFONECONFIDENTIALREVISION A.3 VX 685/VX 690 INSTALLATION GUIDE 39CHAPTER 6Troubleshooting GuidelinesThis chapter lists typical examples of malfunctions that you may encounter while operating your terminal and the steps that you can take to resolve them.The troubleshooting guidelines provided in the following section are included to assist successful installation and configuration of the terminal. If you are having problems operating your unit, please read these troubleshooting examples. If the problem persists even after performing the outlined guidelines or if the problem is not described, contact your local VeriFone representative for assistance.Blank DisplayWhen the terminal display does not show correct or clearly readable information:•Check all power and cable connections.•If the problem persists, contact your local VeriFone service provider.Keypad DoesNot RespondIf the keypad does not respond properly:•Check the display. If it displays the wrong character or nothing at all when you press a key, follow the steps outlined in Transactions Fail To Process.•If pressing a function key does not perform the expected action, refer to the user documentation for that application to ensure you are entering data correctly.•If the problem persists, contact your local VeriFone representative.TransactionsFail To ProcessThere are several possible reasons why the unit may not be processing transactions. Use the following steps to troubleshoot failures.NOTEThe terminal comes equipped with tamper-evident labels. It contains no user-serviceable parts. Do not, under any circumstance, attempt to disassemble the unit. Perform only those adjustments or repairs specified in this guide. For all other services, contact your local VeriFone service provider. Service conducted by parties other than authorized VeriFone representatives may void any warranty.CAUTIONNot all units require use of a power supply.Using an incorrectly rated power supply may damage the unit or cause it not to work properly. Before troubleshooting, ensure that the power supply used to power the unit matches the requirements specified on the back of the unit (see Specifications for detailed power supply specifications). If not, obtain the appropriately rated power supply before continuing with troubleshooting.
TROUBLESHOOTING GUIDELINESTransactions Fail To Process40 VX 685/VX 690 INSTALLATION GUIDEVERIFONECONFIDENTIALREVISION A.3 Check Magnetic Card Reader•Perform a test transaction using one or more different magnetic stripe cards to ensure the problem is not a defective card.•Ensure that you are swiping cards properly (see Using the Magnetic Card Reader).•Process a transaction manually using the keypad instead of the card reader. If the manual transaction works, the problem may be a defective card reader. •If the problem persists, contact your local VeriFone representative.Check Smart Card Reader•Perform a test transaction using several different smart cards to ensure the problem is not a defective card.•Ensure that the card is inserted correctly (see Using the Magnetic Card Reader).•Ensure the MSAM cards are properly inserted in the slots and are properly secured (see Installing/Replacing MSAM Cards).•If the problem persists, contact your local VeriFone representative.
VERIFONECONFIDENTIALREVISION A.3 VX 685/VX 690 INSTALLATION GUIDE 41
VX 685/VX 690Installation GuideVeriFone Part Number DOC260-003-EN-A, Revision A.3VeriFone, Inc.2099 Gateway Place, Suite 600San Jose, CA, 95110 USA1-800-VERIFONEwww.verifone.comVERIFONECONFIDENTIALREVISION A.3

Navigation menu