Vigil Health Solutions ZRF Vitalilty Wireless RF Module (ZRF) User Manual

Vigil Health Solutions Inc Vitalilty Wireless RF Module (ZRF) The Vigil Care System

a href="https://usermanual.wiki/Vigil-Health-Solutions" itemprop="url"> Vigil Health Solutions >

manual

Vigil Vitality Wireless Module - Manual Vitality Wireless Module (ZRF) Manual Vigil Health Solutions Inc. dedicated to improving seniors' quality of life through creative technology. Page 1 of 3 Revised: 2013-04-25 Vigil Health Solutions Inc. 2102 - 4464 Markham Street * Victoria, BC * Canada * V8Z 7X8. Phone: (250) 383.6900 * (877) 850.1122 Fax: (250) 383.6999 Web: www.vigil.com © Vigil Health Solutions Inc. Description The Vigil Vitality Wireless Module (ZRF) is used to receive handle wireless communication and I/O control on Vigil Vitality Wireless devices. The Vitality Wireless Module operates on the 2.4GHz IEEE 802.15.4 wireless platform. Host board provides power and external I/O to Vitality wireless module. Instructions 1. ZRF solders directly on host board. Please check land pattern of ZRF. 2. Ensure power supply does not exceed 3.6V. Figure 1. ZRF Pinout
Vigil Vitality Wireless Module - Manual Vitality Wireless Module (ZRF) Manual Vigil Health Solutions Inc. dedicated to improving seniors' quality of life through creative technology. Page 2 of 3 Revised: 2013-04-25 Vigil Health Solutions Inc. 2102 - 4464 Markham Street * Victoria, BC * Canada * V8Z 7X8. Phone: (250) 383.6900 * (877) 850.1122 Fax: (250) 383.6999 Web: www.vigil.com © Vigil Health Solutions Inc. Specifications PHYSICAL ELECTRICAL Height 46mm (1.81") Operating Voltage 2-3.6V DC Width 32mm (1.25") Input Voltage 3.3V Depth 5.5mm (0.21") Standing Current 8mA, 28.5mA burst Enclosure Material N/A Shield thickness 0.016 inch thick Mounting Method Soldering Shield material Brass, nickel plated Temperature Ratings Operating: 0°C to 50°C (32°F to 122°F) Storage/ Transport: -55°C to 85°C (-67°F to 185°F) FCC/IC Statements FCC ID UI6-ZRX  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.  To Comply with FCC/IC RF exposure limits for general population/uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. IC: 6706A-ZRX  This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.  Cet appareil est conforme avec les norme(s) exemption de licences RSS d’Industrie Canada. Opération est sujet au deux conditions suivantes. (1) Cet appareil ne peut causer d'interférences, et (2) cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. OEM Responsibilities to comply with FCC and Industry Canada Regulations The ZRF Module has been certified for integration into products only by OEM integrators under the following conditions: 1. The antenna(s) must be installed such that a minimum separation distance of 20cm is maintained between the radiator (antenna) and all persons at all times. 2. The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter. As long as the two conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions cannot be met (for certain configurations or co-location with another transmitter), then the FCC and Industry Canada authorizations are no longer considered valid and the FCC ID and IC Certification Number cannot be used on the final Do not mount Wireless Devices using ZRF on or near metal objects (HVAC, I Beams, etc) or electrical devices (motors, high voltage switching, etc) as they can interfere with the wireless signals
Download:
Mirror Download [FCC.gov]
Document ID1992897
Application ID4hW31fOFgeFwTwpqiPf27g==
Document Descriptionmanual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize16.37kB (204602 bits)
Date Submitted2013-06-17 00:00:00
Date Available2013-06-18 00:00:00
Creation Date2013-06-10 13:46:02
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2013-06-10 13:46:02
Document TitleThe Vigil Care System
Document CreatorMicrosoft® Office Word 2007
Document Author: Jason M. Cai
FCC ID Filing: UI6-ZRF

Navigation menu