Wahoo Fitness GEMRET0101 GEM RETRO User Manual

Wahoo Fitness LLC GEM RETRO Users Manual

Contents

User Manual

Download: Wahoo Fitness GEMRET0101 GEM RETRO User Manual
Mirror Download [FCC.gov]Wahoo Fitness GEMRET0101 GEM RETRO User Manual
Document ID2941402
Application IDU26a9hQOrw9V/OVGEhy8bQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize16.87kB (210924 bits)
Date Submitted2016-03-25 00:00:00
Date Available2016-03-25 00:00:00
Creation Date2016-03-17 18:22:42
Producing SoftwareAcrobat Distiller 9.3.3 (Windows)
Document Lastmod2016-03-17 18:22:42
Document TitleUsers Manual
Document CreatorPScript5.dll Version 5.2.2
Document Author: anbotek

Retrofit Module
Installation and Programming guide
Version 0.1
January 29, 2016
Wahoo Fitness
90 W. Wieuca Road N.E. Suite 110
Atlanta, GA 30342
Telephone: 1-877-978-1112
GEM Retro Module Installation and Programming guide
Version 0.1
Email: support@wahoofitness.com
www.wahoofitness.com
© Wahoo Fitness LLC 2015
Revision History
Version
Revision Date
Change History
0.1
January 29, 2016
Initial Draft
0.2
0.3
0.4
0.5
0.6
Wahoo Fitness
90 West Wieuca Road, Suite 110
Atlanta, GA 30342
www.wahoofitness.com
1-877-978-1112
GEM Retro Module Installation and Programming guide
Version 0.1
Table of Contents
Component identification
Introduction
Components
Installation
Programming
Wahoo Fitness
90 West Wieuca Road, Suite 110
Atlanta, GA 30342
www.wahoofitness.com
1-877-978-1112
GEM Retro Module Installation and Programming guide
Version 0.1
Component identification
Name
Base label
QR code label
RunFit app
Component
Name
Retrofit module
Wahoo Fitness
90 West Wieuca Road, Suite 110
Atlanta, GA 30342
www.wahoofitness.com
1-877-978-1112
Programming
Ethernet
app
Cable
GEM Retro Module Installation and Programming guide
Version 0.1
Component
Introduction
The Wahoo retrofit module connects to fitness equipment that has a CSAFE port
to enable Bluetooth and ANT+ wireless connectivity. Users are enabled to connect or
pair their mobile device or leaderboard system via Bluetooth (or ANT+) with the
fitness equipment to track workout data and control the equipment. The base label is
attached to the fitness equipment and provides instructions for pairing the user’s
mobile device. The QR code label is attached to the base label and provides the
Bluetooth advertising ID of the retrofit module connected to the fitness equipment.
The Bluetooth advertising ID is programmed into the retrofit module using the Wahoo
Retrofit Utility app. To control the cardio equipment and save workout data, the
Wahoo RunFit app or 3rd party apps has a QR reader to scan the QR code and pair* the
retrofit module with the fitness app.
Components
Included with retrofit module:
1. Retrofit module
2. Ethernet cable
3. 3M VHB double sided tape
Wahoo Fitness
90 West Wieuca Road, Suite 110
Atlanta, GA 30342
www.wahoofitness.com
1-877-978-1112
GEM Retro Module Installation and Programming guide
Version 0.1
4. Base label
5. QR code label
Not included:
1. Rubbing alcohol or cleaning chemical
2. Paper towel or drying cloth
3. iPhone 4 or later model
To download:
1. RunFit app (download from app store)
2. Retrofit Utility app (download from …)
Installation
1. Locate the CSAFE port on the fitness equipment console or at the bottom of the
fitness equipment

2. Connect the Ethernet cable between the retrofit module and the CSAFE port

3. On fitness equipment, clean the desired area for attaching retrofit module with
rubbing alcohol or cleaning chemical
4. Wipe the desired area dry with a paper towel or drying cloth
5. Clean the bottom of retrofit module with rubbing alcohol or cleaning chemical
6. Wipe the bottom of retrofit module with a paper towel or drying cloth
Wahoo Fitness
90 West Wieuca Road, Suite 110
Atlanta, GA 30342
www.wahoofitness.com
1-877-978-1112
GEM Retro Module Installation and Programming guide
Version 0.1
7. Attach the double-sided tape to the bottom of retrofit module and attach to
desired area on fitness equipment
8. Clean the side of the base label containing instructions with a paper towel or
drying cloth
9. Attach a QR code label to a base label and affix to the area marked as: “ATTACH
QR CODE HERE”
10.
Clean the fitness console with rubbing alcohol or cleaning chemical
11.
Wipe the fitness console dry with a paper towel or drying cloth
12.
Attach the base label (with QR code label on top) to desired location on fitness
console
13.
Programming
1. Download the programming app…
Wahoo Fitness
90 West Wieuca Road, Suite 110
Atlanta, GA 30342
www.wahoofitness.com
1-877-978-1112
GEM Retro Module Installation and Programming guide
Version 0.1
2. Download RunFit app….
3. Power up the fitness equipment and ensure the green LED on retrofit module is on
NOTE: Only power up ONE fitness equipment machine at a time to avoid
programming errors

4. Open programming app

5. Choose a 4 character Bluetooth advertising ID

6. Click “Next”

7. When the “Bluetooth advertising ID set” is displayed, click “Next”

8. Align the QR reader square with QR label that you wish to program

9. When the “QR code set” is displayed, click “Next”

10.
When the “Programming completed!” is displayed, exit the programming app.

11.
Open RunFit
Wahoo Fitness
90 West Wieuca Road, Suite 110
Atlanta, GA 30342
www.wahoofitness.com
1-877-978-1112
GEM Retro Module Installation and Programming guide
Version 0.1
12.
Align QR reader with newly programmed QR code

13.
Verify that RunFit has paired with fitness equipment

14.
Wahoo Fitness
90 West Wieuca Road, Suite 110
Atlanta, GA 30342
www.wahoofitness.com
1-877-978-1112
GEM Retro Module Installation and Programming guide
Version 0.1
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable
exposure condition without restriction.
Wahoo Fitness
90 West Wieuca Road, Suite 110
Atlanta, GA 30342
www.wahoofitness.com
1-877-978-1112
10
GEM Retro Module Installation and Programming guide
Version 0.1
- English: "
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that
may cause undesired operation of the device."
- French:"
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement."
Wahoo Fitness
90 West Wieuca Road, Suite 110
Atlanta, GA 30342
www.wahoofitness.com
1-877-978-1112
11

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : anbotek
Create Date                     : 2016:03:17 18:22:42+08:00
Modify Date                     : 2016:03:17 18:22:42+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Title                           : <463A5C616D79BDD3CAD6B5C4B0B8D7D35C32303136C4EA312D32D4C25CCEB0B4B4C1A65C303131363031313235314920CEB0B4B4C1A62047454D20524554524F2047454D5245543031303120D2FCCABFC1C12DB6A1DCB22D4E422D5254544528D0C5BFC6295CD7CAC1CF4F4B5C75736572206D616E75616
Creator                         : anbotek
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.3.3 (Windows)
Document ID                     : uuid:9fbf8422-8bc8-4d27-b72c-2befab62b25e
Instance ID                     : uuid:de23cce7-2e9b-470a-973f-a9518141b017
Page Count                      : 11
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PADGEMRET0101

Navigation menu