Wahoo Fitness WF104 KICKR PowerTrainer User Manual

Wahoo Fitness LLC KICKR PowerTrainer 20130207 v1 Exhibit E User Manual

a href="https://usermanual.wiki/Wahoo-Fitness" itemprop="url"> Wahoo Fitness >

User Manual_20130207_v1 - Exhibit-E-User_Manual

                     Welcome! Thanks  for  purchasing  the  Wahoo  KICKR  PowerTrainer!  This Quick Start Guide will help you get set up and ready to ride. For the complete owner’s manual, please follow the link or scan the QR Code at the bottom of this page. At Wahoo Fitness, we run, ride, and workout every single day so we can bring you the best product possible. Please feel free to contact us with an questions or concerns at:   Wahoo Fitness 141 West Wieuca Rd. #104B Atlanta, GA  30342 Email: support@wahoofitness.com Web: www.wahoofitness.com CAUTION  Before  beginning  or  modifying  any  exercise  program, please consult your physician.  Ensure  the  quick  release  skewer  is  properly  tightened before  riding  the  trainer.  See  Attaching  Your  Bicycle  for more information.  When  using  the  KICKR PowerTrainer  for  extended  periods of  time, the resistance  unit  and  flywheel  will  heat  up.  DO NOT  touch  the  flywheel  or  resistance  unit  while  in  use  or while it is hot.  Do not attempt to dismount the bicycle while the flywheel is in motion; wait for the trainer to coast to a stop; apply a higher resistance to stop the trainer sooner.  The flywheel, belt, and drive pulley will be rotating at high speeds; keep children and pets  away  from this  equipment while in use.  Only use the KICKR PowerTrainer on a stable, level surface and  only  after  properly  adjusting  the  leveling  feet  to eliminate wobble.  Use  caution  when  riding  out  of  the  saddle  on  the  KICKR PowerTrainer.  Do  not  do  so  until  you  are  comfortable riding at slower speeds.   Allow at least three (3) feet (1m) of space on all sides of the trainer and bicycle during operation. Learn More: For the complete product manual, instructional  videos,  compatible Apps, FAQs and more, please visit: www.wahoofitness.com/KICKR Scan Me! Quick Start Guide
1. Unpacking In  the  box  you  will  find  your  (a)  KICKR  PowerTrainer,  (b)  AC  power adapter, (c) quick release skewer, and (d) reversible axle spacer. Remove your KICKR PowerTrainer and accessories from the box. Be sure to save the protective packaging for transportation and storage. (NOTE: Once all protective packaging has been removed, avoid laying the trainer on its side to protect the precision balanced flywheel and cassette.) 2. Setup Place the KICKR PowerTrainer on a stable, level surface and open the legs by (a) pressing down on the blue leg-lock tabs and (b) pivoting the legs outward until they snap in place. (NOTE: Ensure the leg-lock tabs have popped back up and secured the legs in the open position.) To stabilize the trainer, adjust the two leveling feet (c) by twisting them left or right until the trainer is level and locking them into place by (d) tightening the blue locknuts against the frame. (NOTE: Check that your trainer is stable before every ride; if needed, readjust the leveling feet.) Adjust the height of the trainer to fit your specific wheel size by (e) relocating the height adjustment knob on the center leg to the appropriate setting. If you are unsure of your wheel size, check the tire side-wall or consult your local bike shop.  Your  KICKR  PowerTrainer  comes with  a  reversible  axle  spacer  to  accommodate  frames with  different  rear  dropout spacing; locate the axle spacer and install according to your rear wheel spacing. Note: a typical road bike is 130mm spacing while a typical  mountain bike is 135mm spacing. Next, install the quick release skewer as shown; leave the  skewer loose to allow for easy bicycle installation.  Once your KICKR PowerTrainer is set up, use the included AC power adapter to connect the trainer to a standard 120v wall  outlet.  A  12v  DV  power  adapter  (sold  separately,  available  at  www.wahoofitness.com)  is  also  available  for powering the trainer from a standard 12c car battery. 130mm Spacing    135mm Spacing 2.2 (a) (b) (d) (c) (c) (d) (e) 2.1 (a) (c) (d) (b) 2.2 2.1 3.3
Download:
Mirror Download [FCC.gov]
Document ID1906992
Application IDlZOKVqF0X+tBowlqMEPEpg==
Document DescriptionUser Manual_20130207_v1 - Exhibit-E-User_Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize159.73kB (1996593 bits)
Date Submitted2013-02-25 00:00:00
Date Available2013-02-25 00:00:00
Creation Date2012-08-21 09:16:25
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2013-02-08 11:53:59
Document TitleUser Manual_20130207_v1 - Exhibit-E-User_Manual
Document CreatorMicrosoft® Office Word 2007
Document Author: Wahoo
FCC ID Filing: PADWF104

Navigation menu