WaveIP GA900-RSU Indoor Transmitter Unit User Manual

WaveIP Ltd. Indoor Transmitter Unit Users Manual 1

a href="https://usermanual.wiki/WaveIP" itemprop="url"> WaveIP >

Contents

Users Manual 1

January 04 Page 1 of 1 GigAccessTM RSU Self-Install Residential Subscriber Unit End User Manual 1. Packing List • RSU900 or RSU 2.4 • Power Supply • End User Manual 2. Installation The RSU is a self-installed, plug and play unit, which requires minimum setup operations from the user. 1. Polarization Indication 2. ETH link led (Yellow) 3. Air link led (Green) 4. Received Signal Indicator Lights 5. ETH Connector 6. Power led 7. DC Power Jack 1) Figure 3-1: General Description for GigAccess™ Self Install RSU 2.1. Before You Start 2) Make sure your computer is equipped with an Ethernet Network Interface (NIC). 3) Make sure your computer network configuration is set up according to your Internet Service Provider instructions (typically to automatically obtain an IP address - DHCP). 4) Select the appropriate location for the RSU: • Locate the RSU near an exterior window. • Locate the RSU in such a way that its antenna will face your service provider Access Unit (AU). Avoid any physical obstacles, which may block the signal. 1 4 7 6 5 3 2
Download:
Mirror Download [FCC.gov]
Document ID457456
Application IDop6q3umLVwndOPdnZX+8wA==
Document DescriptionUsers Manual 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize1.96kB (24500 bits)
Date Submitted2004-08-06 00:00:00
Date Available2004-08-03 00:00:00
Creation Date2004-08-03 11:02:37
Producing SoftwareAcrobat Distiller 4.05 for Windows
Document Lastmod2004-08-03 13:02:19
Document TitleUsers Manual 1
FCC ID Filing: QQ2-GA900-RSU

Navigation menu