WaveIP GAOFDM900QRSU Indoor Transmitter Unit User Manual

WaveIP Ltd. Indoor Transmitter Unit Users Manual Part 1

a href="https://usermanual.wiki/WaveIP" itemprop="url"> WaveIP >

Contents

Users Manual Part 1

January 04 Page 1 of 1 GigAccessTM RSU Self-Install Residential Subscriber Unit End User Manual 1. Packing List • RSU UNIT • Power Supply • End User Manual 2. Installation The RSU is a self-installed, plug and play unit, which requires minimum setup operations from the user. 1. Polarization Indication 2. ETH link led (Yellow) 3. Air link led (Green) 4. Received Signal Indicator Lights 5. ETH Connector 6. Power led 7. DC Power Jack 1) Figure 3-1: General Description for GigAccess™ Self Install RSU 2.1. Before You Start 2) Make sure your computer is equipped with an Ethernet Network Interface (NIC). 3) Make sure your computer network configuration is set up according to your Internet Service Provider instructions (typically to automatically obtain an IP address - DHCP). 4) Select the appropriate location for the RSU: • Locate the RSU near an exterior window. • Locate the RSU in such a way that its antenna will face your service provider Access Unit (AU). Avoid any physical obstacles, which may block the signal. 1 4 7 6 5 3 2
Download:
Mirror Download [FCC.gov]
Document ID619990
Application IDDJ++aNsj1n+SjNuu/8W6Sw==
Document DescriptionUsers Manual Part 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize2.16kB (26955 bits)
Date Submitted2006-01-17 00:00:00
Date Available2006-01-17 00:00:00
Creation Date2005-08-28 13:40:20
Producing SoftwareAcrobat Distiller 4.05 for Windows
Document Lastmod2005-08-28 13:40:21
Document TitleUsers Manual Part 1
FCC ID Filing: QQ2-GAOFDM900QRSU

Navigation menu