WestRock Switzerland 2070-20-1 RFID Tag reader User Manual Users manual
WestRock Switzerland Ltd RFID Tag reader Users manual
Contents
- 1. Users manual
- 2. Users Manual
Users manual
WestRock Switzerland Ltd.
Avenue de la Gare 29
1950 Sion, Switzerland
Phone: +41 (0)27 324 78 80
Customer service: +41 (0)27 324 78 81
Fax: +41 (0)27 323 40 62
Internet: www.mwvaardex.com
WestRock Switzerland - NT 1 / 3 [2070-20-1] MEMS8 Reader user manual v0-1 DRAFT.docx
Dernière modification le : 04.11.2016 15:51
MEMS8 Reader
User Manual
1 INTRODUCTION ......................................................................................................................................... 2
2 INSTALLATION .......................................................................................................................................... 2
3 OPERATION ................................................................................................................................................ 2
4 TECHNICAL SPECIFICATIONS .............................................................................................................. 2
4.1 NOTE........................................................................................................................................................ 3
4.2 DIMENSION AND WEIGHT ......................................................................................................................... 3
Version
Date
Chap
ter
Description
0.0 20.09.2016
- Base version - DRAFT
0.1 04.11.2016
4 Updated input voltage
WestRock Switzerland Ltd.
Avenue de la Gare 29
1950 Sion, Switzerland
Phone: +41 (0)27 324 78 80
Customer service: +41 (0)27 324 78 81
Fax: +41 (0)27 323 40 62
Internet: www.mwvaardex.com
WestRock Switzerland - NT 2 / 3 [2070-20-1] MEMS8 Reader user manual v0-1 DRAFT.docx
Dernière modification le : 04.11.2016 15:51
1 Introduction
The MEMS8 Reader is a device allowing reading and data transfer from WestRock, Serie 8
monitors (including MEMS, Electronic Dosepack (EDP), Helping Hands, etc.).
2 Installation
Connect USB cable on the back of the MEMS8 Reader as indicated by the blue arrow,
below:
Connect the other side of the USB cable in a free USB port of your PC.
The blue LED turn solid ON (indicating that the device is powered).
The PC recognize and automatically installs the drivers.
The system is ready for use.
3 Operation
Monitor reading is triggered by user software.
During monitor reading the blue LED flashes.
The rest of the time the blue LED remains ON, indicating that the MEMS8 Reader is
powered.
4 Technical specifications
The MEMS8 Reader is powered from the USB port.
Designation: MEMS8 Reader
Article: 2070-20-1
Input voltage: USB 5V, 200mA
Operating temperature: 10-40°C
Fully compliant with the USB 2.0. full-speed specification.
WestRock Switzerland Ltd.
Avenue de la Gare 29
1950 Sion, Switzerland
Phone: +41 (0)27 324 78 80
Customer service: +41 (0)27 324 78 81
Fax: +41 (0)27 323 40 62
Internet: www.mwvaardex.com
WestRock Switzerland - NT 3 / 3 [2070-20-1] MEMS8 Reader user manual v0-1 DRAFT.docx
Dernière modification le : 04.11.2016 15:51
4.1 Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception which can be determined by turning the equipment off and on,
the user is encouraged to try to correct interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC and Industry Canada RF radiation exposure limits set forth for general population
(uncontrolled exposure). This device must not be collocated or operating in conjunction with any other antenna or
transmitter.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
Changes or modifications not expressly approved by WestRock Switzerland Ltd. could void the user’s
authority to operate the equipment.
4.2 Dimension and weight
Weight: About 40g