Willis Electric AL69-TX Garden Laser Projector User Manual

Willis Electric Co., Ltd. Garden Laser Projector

Contents

User manual

1. Connect the power adapter and the laser light, the adapter input voltage is AC120V. Attention to avoid laser light to illuminate the eyes, to
prevent the glare of the eyes directly.
2. Take the laser light in a dark environment, or cover the photoresistor to keep out the light. The effects are different every time when power on.
3. Press the button to switch the effects, long press the button to close the laser light, short press the button again to turn on it. During the day，
if you press the button, it lights for 10 minutes and turn off automatically after 10 minutes.
4. Use the remote control, See the picture below:
FCC NOTE：
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR
CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

Navigation menu