Xenon SM-PW801U Smart In Wall Outlet User Manual 1

SHENZHEN XENON INDUSTRIAL LTD Smart In Wall Outlet 1

User manual

2.Then tap "+". 3.Find "Jinvoo Smart" in the list.  4.In the new window, select your  Jinvoo Smart account’s region,  type your Jinvoo Smart account and password, then tap "Link Now".5. After you assign rooms for    devices .6.Your devices will be listed in   the Home Control page. Ok Google, turn on/off bedroom light.Ok Google, brighten bedroom light.Ok Google, dim bedroom light.Ok Google, set bedroom light to red.20 21 22    Now you can control your smart   devices through Google Home.   Take bedroom light  as the example,   the supported voice commands   are as below: Now,you can use Echo to conteol two different smart plugs.Like Alexa,turn on the living room/Alexa,turn on the dining room.Alexa will turn on different devices separtely.When you say Alexa,turn off the living room/Alexa,turn off the dining room.Alexa will turn off the different devices separately.Alexa Skils:Google Assistant:Also,you can create a group to control these devices together.1.Open Alexa app and click the button             ,then OK2. Input Jinvoo Smart to search all column, 3. Click Jinvoo Smart        and Enter.J* Click AP mode and press next step in Add device.select the smartLife xxx for your WiFi, no need toinput password once you select the smartLife xxxis smartLifexxx and confirm device.FCC Warnning:This equipment has been tested and found to comply with the limits for a Class B digital device,Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference byone or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.23

Navigation menu