Xplore Technologies EM7355 WIRELESS MODULE User Manual
Xplore Technologies WIRELESS MODULE
Contents
- 1. User Manual
- 2. Users Manual
User Manual
XC6 User’s Handbook 1
XC6 User’s Handbook 2
Contents
Welcome 12
About your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Package
contents
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Optional accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Contacting Xplore – service and
questions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1
Getting Started 19
Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Back view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Left side view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Right side view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Bottom view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Top view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Quick-start
guide
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Application, Windows, and hot keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
2
Using the Tablet 29
Turning on the
computer
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Turning off the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Using the Reset
switch
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Suspending and resuming operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Suspending
operation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Resuming operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Using the pen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using the digitizer to perform mouse functions. . . . . . . . . . . . . . . . . . . . . . . 35
Changing the pen double-click
speed
. . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Contents
XC6 User’s Handbook 3
Positioning the pen and pen
tether
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Using the fingerprint scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Changing the screen orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Adjusting the screen brightness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Enabling automatic backlight control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Optimizing screen settings for outdoor use . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Docking the tablet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Connecting devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Connecting to a local area network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Connecting USB-compatible devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Connecting an external microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Adjusting microphone volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Connecting a headphone or
speakers
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Adjusting headphone or speaker volume . . . . . . . . . . . . . . . . . . . . . . . . 45
Connecting a monitor or projection panel
(optional)
. . . . . . . . . . . . . . . . . . . 46
Activating the monitor or projection
panel
. . . . . . . . . . . . . . . . . . . . . . . 46
Connecting a device to the serial port (standard). . . . . . . . . . . . . . . . . . . . . . 47
Connecting an XPL expansion module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Using the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Charging the battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
If you do not have an external battery charger . . . . . . . . . . . . . . . . . . . . 48
If you have an external battery charger . . . . . . . . . . . . . . . . . . . . . . . . . 49
Removing and installing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Removing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Installing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Discarding batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Using power options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Displaying power options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Checking battery power
status
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Selecting a power
plan
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Selecting power
options
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Selecting Power
(On/Off)/Backlight(On/Off)/Sleep/
Resume
button options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Tips for conserving battery power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Contents
XC6 User’s Handbook 4
Accessing the Solid State Drive (SSD) cartridge . . . . . . . . . . . . . . . . . . . . . . . . . 57
Re-installing the drive carrier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Accessing the MicroSD and SIM compartment . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Programming hot keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Programming hot keys to start applications, open documents,
or go to a website . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Programming hot keys to perform pre-defined functions . . . . . . . . . . . . . . . 65
Programming hot keys to perform other key functions . . . . . . . . . . . . . . . . . 67
3
Maintaining the Tablet 71
Caring for the tablet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Checking power cords and connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Protecting the computer from
damage
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Preventing the computer from overheating . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Storing the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Caring for the display screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Protecting the display screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
When to replace the pen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Calibrating the digitizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
A
Troubleshooting 77
B
Using BIOS and AOS Functions 79
Disabling the Auto Power
feature
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Enabling automatic LCD backlight control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
C
Glossary 81
D
Hardware Specifications 87
E
Agency Notices 93
Contents
XC6 User’s Handbook 5
F
Environmental Policy and Recycling Program 105
Environmental policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Compliance
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Risk reduction, prevention, and resource management . . . . . . . . . . . . 105
Communication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Continuous improvement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Take back and recycling
program
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Environmental and Sustainability Corporate Report . . . . . . . . . . . . . . . . . . . . . 107
XC6 User’s Handbook 6
Disclaimer
Xplore Technologies® has made every effort to ensure the accuracy and completeness of
this document; however, because ongoing development efforts are made to continually
improve the capabilities of our products, we cannot guarantee the accuracy of the contents
of this document. We disclaim liability for errors, omissions, or future changes herein.
Trademarks
Xplore and the Xplore logo are registered trademarks of Xplore Technologies Corp.; iX104,
XC6, XC6 Lite, and XC6 Dual Mode are trademarks of Xplore Technologies Corp.
Kensington and MicroSaver are registered trademarks of the Kensington Technology Group.
Microsoft is a registered trademark of Microsoft Corporation. Windows 8.1, and Windows 7
are trademarks of Microsoft Corporation. MicroSD is a registered trademark of the Personal
Computer Memory Card International Association. Intel and Core, are registered trademarks
of Intel Corporation. Wi-Fi is a trademark of the Wireless Ethernet Compatibility Alliance
(WECA). ISODAMP is a registered trademark of Aearo Company.
All other brands, product names, company names, trademarks and service marks used herein
are property of their respective companies.
Copyright
Copyright © 2003-2014 Xplore Technologies Corp. All rights reserved. No part of this
publication may be copied, reproduced, or translated, without the prior written consent of
Xplore Technologies. No part of this publication may be stored or transmitted in any
electronic form without the prior consent of Xplore Technologies. Any unauthorized use is a
violation of copyright laws.
Publication information
PN: 95-01110, Rev. A
January, 2014
Declaration of conformity
DECLARATION OF CONFORMITY according to FCC Part 15, IC ICES-003, and
RTT&E directives
Responsible Party Name: Xplore Technologies
Address: 14000 Summit Drive, Suite 900, Austin, Texas 78728
Telephone: 512.336.7797
Declares that product: Model Series: iX104C6 complies with Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and, (2) This device
must accept any interference received, including interference that may cause undesired
operation.
WARNING
Changes or modifications to this unit not expressly approved by the party responsible for
compliance may void the user’s authority to operate this equipment.
For more information about FCC rules and their applicability to the iX104, see
Appendix E, “Agency Notices.”
XC6 User’s Handbook 7
Energy Star Partner
Warranty information
The XC6 is backed by a standard 36-month International Limited Warranty. An extended
International Limited Warranty is available. Check the service kit included with your
computer for warranty terms and conditions.
Important safety information
Before you use the XC6 (referred to as the tablet), read these safety
instructions and the operation instructions in this handbook.
Failure to observe all these instructions voids the Limited Warranty and may lead to
suspension or denial of services to the offender, or legal action, or both.
Follow any special regulations governing the use of the tablet and, if radio-enabled, always
switch it off in areas where radio devices are forbidden or when the radio device can cause
interference or danger.
Always follow any safety laws and regulations pertaining to the use of cell phones and two-
way radios, because these laws and regulations typically apply to the use of the wireless-
enabled tablet.
Observe all restrictions on the use of radio equipment in fuel depots (fuel storage and
distribution areas), chemical plants, and wherever blasting operations are in progress or in
any area in which restrictions on radio transmissions are imposed.
Switch off the tablet when in an aircraft. The tablet is not FAA-approved for use on aircraft.
The effect of the use of the tablet in aircraft is unknown. Using the tablet in an aircraft may
affect aircraft instrumentation, communication, and performance; may disrupt the network;
and may be illegal.
Operating the wireless-enabled tablet may interfere with the functioning of inadequately
protected medical devices such as pacemakers. Consult a physician or the manufacturer of
the medical device if you have any questions.
Radio signals from your tablet will not affect the operation of most modern equipment, but
certain electronic equipment, including automotive systems, may not be shielded against
radio signals from your tablet. Check with the manufacturer of your motor vehicle or the
manufacturer’s representative to determine whether using the tablet will present any safety
issues.
Avoid using the tablet in any environment that requires your full attention, such as when
driving a vehicle. If you need to use your tablet while driving, have a passenger use it for
you or find a safe location to halt your vehicle.
XC6 User’s Handbook 8
WARNING – BATTERIES
Use only battery types specified in this handbook. Using any other type of battery can be
dangerous and can disable the tablet. Do not drop or mishandle the batteries, immerse them in
water, or subject them to high heat. Doing so could increase the risk of explosion or leakage,
and possibly cause injury. The lithium-ion batteries used in this equipment contain material that
is hazardous to your health. If battery contents come in contact with the eyes, IMMEDIATELY
flush the affected area with clean water for 15 minutes and have someone else summon
medical attention for you. Unaffected persons should assist the affected individual in the vital
first flushing of the eyes. RECHARGING THE BATTERY MUST ONLY BE CARRIED OUT IN
ANON-HAZERDOUS AREA USING THE SUPPLIED AC ADAPTOR. The definition of
hazardous areas can be found in Standard EN 60079-10.
WARNING
When operating the tablet in a known explosive environment do not remove or replace the
battery while the circuit is live. Before removing the battery verify that the area is known to be
free of ignitable concentrations of flammable substances.
EXPLOSION HAZARD – DO NOT DISCONNECT WHILE CIRCUIT IS LIVE UNLESS
AREA IS KNOWN TO BE NON-HAZARDOUS.
AVERISSEMENT – RISQUE D’EXPLOSION. NE PAS DÉ BRANCHER TANT QUE LE
CIRCUIT EST SOUS TENSION, À MOINS QU’IL NE S’AGISSE D’UN EMPLACEMENT NON
DANGEREUX.
WARNING
EXPLOSION HAZARD – DO NOT REPLACE THE BATTERY UNLESS POWER HAS
BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE NON-HAZARDOUS.
AVERTISSEMENT – RISQUE D'EXPLOSION – COUPER LE COURANT OU S'ASSURER
QUEL'EMPLACEMENT EST DESIGNE NON DANGEREUX AVANT DE REPLACER LE
BATTERY.
WARNING
EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY IMPAIR
SUITABILITY FOR CLASS I, DIVISION 2.
AVERTISSEMENT – RISQUE D'EXPLOSION – LA SUBSTITUTIOND E
COMPOSANTSP EUTR ENDRE CE MATERIEL INACCEPTABLE POUR LES
EMPLACEMENTS DE CLASSE I, DIVISION 2.
WARNING
EXPLOSION HAZARD – DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS
BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE NON-HAZARDOUS.
AVERTISSEMENT – RISQUE D'EXPLOSION – AVANT DE DECONNECTER
L'EQUIPEMENT, COUPER LE COURANT OU S'ASSURER QUE L'EMPLACEMENT EST
DESIGNE NON DANGEREUX.
XC6 User’s Handbook 9
WARNING
Do not use any dock or any other accessory or attachment that is not manufactured or supplied
by Xplore or an authorized Xplore accessories supplier. Use of any accessory or attachment
that is not supplied or approved for use with the tablet by Xplore is not permitted because it
may cause hazards.
Operate the tablet only from the type of power source indicated on the marking label. (See
page 48 for more information about the battery and power supply.) Route power supply
cords so that they are not likely to be walked on or pinched by items placed upon or against
them. Pay particular attention to cords at plugs and convenience receptacles, and at the point
where cords exit from the tablet or its dock. Do not overload wall outlets, extension cords,
or integral convenience receptacles because this can cause fire or electric shock.
Unplug the tablet and refer the tablet and dock for service to qualified service personnel
if any of the following conditions occur:
■
The power supply cord or plug is damaged.
■
The tablet or dock does not operate normally when you follow the instructions
in this book.
■
The tablet or dock exhibits a distinct change in performance. Adjust only
controls for which there are instructions in this book. An improper adjustment
of other controls can result in damage and may require extensive work by a
qualified technician to restore the tablet or dock to normal operation.
CAUTION
Avoid prolonged physical contact with the exposed metal surfaces on the front and back
of the tablet. While the tablet may not feel hot to the touch, if you maintain physical
contact with the tablet for a long time (for example, if you rest the tablet on your lap for a
long time), your skin may suffer low-heat injury. In addition, be careful when you remove
a PC card that has been used for a long time, because the card may be hot.
XC6 User’s Handbook 10
Welcome
Welcome to the Xplore Technologies® XC6™tablet PC, the rugged
tablet designed, tested, and manufactured to meet the environmental
and physical real-world challenges faced by today’s mobile workers.
Based on years of experience in rugged mobile applications, the XC6 is
designed to withstand the abuses of everyday wear and tear.
Advanced technology, innovative design, and a rugged case are just a few
highlights of your XC6 system.
Tablet with enhanced performance antenna
Note: This handbook assumes that you have basic experience
using computers and Microsoft® Windows®.
XC6 User’s Handbook 11
About your computer
The XC6 is a high-performance tablet PC that runs on Microsoft
Windows 7 32-bit, Windows 7 64-bit, and Windows 8.1 64-bit operating
systems.
You can use any of the following methods to control the tablet:
■
Special enhanced stylus pen (included with the tablet)
■
Your finger
■
Any suitable pointing device
Note: In this handbook, all information applies to all models
unless otherwise noted.
All XC6 tablets have been engineered and tested to meet Military
Standards for Environmental Extremes (MIL STD 810G). Your tablet
includes the following features that make it exceptionally rugged and
durable:
Durable, long-lasting, rigid magnesium enclosure
Interior and exterior multi-layer magnesium structure
Bumper system and gasket protection mechanisms
Specialized drive technology
Removable, dual, Solid State Drive (SSD) cartridge
Integrated, protected wireless LAN and WAN antennas
for dual mode operation
Locked-in-place memory, cables, and connectors
Proprietary thermal management system
XC6 User’s Handbook 12
Package contents
Check to make sure your package includes the following items:
■
Quick Start Guide
■
Battery pack
■
Power cord
■
AC adapter
■
Stylus Pen (attached to tablet)
■
Stylus Pen tether (attached to tablet)
■
XC6 tablet PC
■
Warranty information kit
■
Operating System Recovery Guide
Optional accessories
Your package also includes any optional accessories you ordered.
Docking options
■
xStand Desktop Docking Station
■
xDock Vehicle Docking Station
Carrying cases
■
Shoulder case
■
Portfolio case
■
Dockable case
Memory
■
4, 8, or 16 GB RAM
■
60, 120, 240, or more GB Solid State Drive (SSD)
Power options
■
AC adapter with U.S. cord
■
Extended life battery pack (80.75 watt hours)
■
Auto adapter (cigarette lighter adapter)
Additional accessories
■
Top-mounted Fast-Lock GPS II Pro (submeter accuracy)
■
Non-rugged USB optical disk drive
■
USB rugged, backlit keyboard (83-key)
■
Replaceable drive cartridges
■
Active stylus
XC6 User’s Handbook 13
Contacting Xplore – Service and Questions
Note: To troubleshoot problems (including wireless and GPS
problems), before you call, read the FAQ page of the Xplore
Technologies Web site. Go to
http://www.xploretech.com
;
then
select Customer Support; then FAQ.
If you purchased your tablet from an authorized Xplore dealer,
contact the dealer for service and support.
If you purchased your tablet directly from Xplore, use any of the
following methods to contact Xplore for service and support:
Web site http://www.xploretech.com
E-mail customersupport@xploretech.com
Toll free 1-866-296-8541, extension 222
Fax 1-512-336-7791
Before you contact Xplore, have the following information ready so that
the customer support representative can quickly provide a solution:
Product name: XC6
Product serial number
Purchase date
Conditions under which the problem occurred
Any error messages that were displayed
Type of device connected, if any
XC6 User’s Handbook 14
1 Getting Started
This chapter gives you an overview of your tablet and includes a
quick-start guide to tablet keys.
Front view
Built-in
Microphone
Reset switch
Status Indicator
Auto Light Sensor
SSD Indicator
Digital Camera
Speaker Speaker
Fingerprint Scanner
Built-in Microphone Enables you to input mono audio with noise cancellation. (See page 44.)
Reset Switch Enables you to turn off the computer when using the Power (On/Off)/Backlight
(On/Off)/Resume key is not effective. (See page 30.)
Status Indicator Indicates the computer status (on, off, etc.). (See page 24.)
Speakers Enable you to listen to stereo audio files. Sealed to provide protection from the
environment.
Auto Light Sensor Detects ambient light conditions.
SSD Indicator Indicates hard drive activity. (See page 24.)
Digital Camera 1-mega-pixel, auto-focus camera for taking color or black-and-white image or video.
Fingerprint Scanner Enables you to use fingerprint verification features. (See page 38.)
Chapter 1. Getting Started
XC6 User’s Handbook 15
Back view
Digital Camera
Fan Cover
SSD Carrier
An
te
nna Covers Removable Battery Pack
Battery Release Latch
Battery Lock Button
Pen Pen Holder
Fan Cover Plastic cover over the thermal transfer bay that manages heat movement out of the
computer.
Antenna Covers For optional wireless LAN and WAN models, protect and secure the radio antennas
(accessible by authorized service personnel only).
Pen The main device you use to enter data and control applications (instead of a mouse or a
keyboard). Also called the stylus. See “Using the pen” on page 34.
Pen Holder Provides a place to secure the pen when you are not using it.
Battery Release Latch Provides access to the battery.
Battery Lock Button Secures the battery inside the tablet.
Removable Battery Pack Powers the computer when AC power is unavailable.
Digital Camera 5-mega-pixel, auto-focus camera for taking color or black-and-white image or video.
SSD Carrier User-accessible drive carrier for SSD storage.
Chapter 1. Getting Started
XC6 User’s Handbook 16
Left side view
Power On/Off,
Backlight On/Off,
Sleep/Resume button
Kensington
lock slot
Heat exchange XPL side port
Power On/Off,
Backlight On/Off,
Sleep/Resume Button
Press to power computer.
Press and hold for more than 4 seconds to force power off.
Momentarily press to toggle the backlight on or off.
Heat Exchange Helps prevent the computer from overheating by forcing heat away from the
computer. (Do not block the vents.)
XPL Side Port Permits connection of special devices made expressly for the XC6.
Kensington™ Lock Slot Connector for the optional Kensington MicroSaver™ or equivalent compatible
security cable.
Note: Contact your reseller for information about the Kensington security cable.
Chapter 1. Getting Started
XC6 User’s Handbook 17
Right side view
Po
wer
conne
ctor
USB ports
Headphone
connector
Microphone
connector
LAN connector
9-pin serial connector or
optional connector for external
monitor
The connectors on the right side of the computer are located behind the outer doors.
Power connector For the AC adapter or optional auto adapter. (See “Optional accessories” on
page 15.)
USB 2.0 ports For Universal Serial Bus devices (compliant with USB Standard Revision 2.0).
Note: The optional Office and Vehicle Docks include additional USB ports. See
“Optional accessories” on page 15.
Headphone connector For stereo headphones or speakers.
Microphone connector For an external microphone.
LAN connector For connecting a standard RJ-45 connector to the tablet’s internal local area
network (LAN) card
9-pin serial
connector or
optional external
monitor connector
Serial connector for connecting terminals or other devices that use the RS-232,
RS-422, or RS-485 data transfer standard, or an optional connector for an external monitor
or projection panel.
Bottom view
Chapter 1. Getting Started
XC6 User’s Handbook 18
Bottom view
Docking Connector for the
Optional Xplore Tablet Dock
Guide Pin Receptacles
Docking Connector Enables you to connect the optional xStand Desktop Docking Station or xDock
Vehicle Docking Stations.
Guide Pin Receptacles Help assure a secure connection of the optional xStand or xDock.
Note: See “Optional accessories” on page 15.
Top view
XPL Expansion Port
Bumpers
Bumpers Fabricated from rugged material. Raised to help protect the computer from damage.
XPL Expansion Port A port that permits connection of special devices made expressly for the XC6.
Chapter 1. Getting Started
XC6 User’s Handbook 19
LED indicators
The LED indicator lights show the status of system functions. The Drive LED blinks whenever one of the
SSDs are accessed. Table 1 defines the states of the Status LED.
Status
LED
Drive LED
Table 1 Status LED Indicator State Definitions
LED State
AC Adapter
Battery
Tablet Mode
Green, Blinking slowly
Plugged In
Charging
On, Off, or Hibernating
Fully Charged
Sleep Mode
Green / Cyan, Blinking slowly
Plugged In
Charging
Green, Breathing
Not Plugged In
Discharging
Plugged In
Removed
Green, Continuous
Plugged In
Fully Charged
On
Removed
Not Plugged In
Discharging
Off (No Light)
All Conditions
All Conditions
Off or Hibernating (or any Night Vision Mode).
Blue, Continuous
All Conditions
All Conditions
On. Front or Rear Camera is active.
Red, Blinking Quickly
Not Plugged In
Discharging, <10%
On. Plug the tablet into an AC/DC power source or
install a charged battery.
Red, Continuous
Not Plugged In
Discharging, <3%
On. Plug the tablet into an AC/DC power source or
install a charged battery.
Installed
1. Off. Battery is critically low. Plug the tablet into an
AC/DC power source or install a charged battery.
2. Or, the tablet has encountered a fault and is not
operating normally. Contact your computer support
personnel, such as your help desk.
Amber, Continuous
All Conditions
Installed
High Temperature Threshold Exceeded
Amber / Green, Blinking Quickly
All Conditions
Installed
Critical Temperature Threshold Exceeded
Chapter 1. Getting Started
XC6 User’s Handbook 20
Quick-start guide
This section is a quick guide to using the main features of your tablet.
(See Chapter 2 for detailed information.)
Application, Windows, and Hot keys
Secure Attention
Sequence Key
Start Key
Hot Key 1
Hot Key 2
Hot Key 3
Fingerprint scanner
Fu
nction
Key
Chapter 1. Getting Started
XC6 User’s Handbook 21
Table 2 Main keys
Press this key... To perform this function
Log on after resuming operation from power
management, powering on, or
locking.
After logging on, launch Windows Task Manager.
Windows Start Button.
Use in combination with another key to perform various
functions. (See page 27.)
Fingerprint scanner.
To define a function, see “Programming
Hot Keys” on page 60.
In the default configuration, the P3 key
puts the computer in Sleep mode and
the Power button shuts down the
computer. To change these settings, see
page 52.
Display the Start menu.
Open Internet Explorer,
or perform a user-definable function.
Put the computer in Sleep
mode.
Table 3 Function mode keys
Press these keys... To perform this function
Default function: Send video display to a monitor
or projection panel connected to the computer
(and back to the computer again). You can
program this key combination to perform a
different function. (See “Programming hot keys
to start applications, open documents, or go to a
website” on page 61.)
Enable or disable Airplane mode, which
toggles wireless radios on/off.
Bluetooth
toggle.
Chapter 2. Using the Tablet
XC6 User’s Handbook 22
2 Using the Tablet
This chapter contains detailed instructions for using the tablet.
Turning on the computer
1. Make sure the computer is off.
When the computer is off, the
Status LED is off.
2. Make sure the battery is charged or that the computer is plugged in to
an external power source.
3. Press the Power On/Off, Backlight On/Off, Sleep/Resume button.
Power
On/Off,
Backlight
On/Off,
Sleep/Resume button
Chapter 2. Using the Tablet
XC6 User’s Handbook 23
Turning off the computer
When the computer is in
Sleep mode, the Status
LED is breathing green.
1. If the computer is in Sleep mode, press the Power On/Off, Backlight
On/Off, Sleep/Resume button to resume operation. (See page 32 for
information about Sleep mode.)
Power
O
n
/Off,
Backlight On/Off and
Sleep/Resume
bu
tton
2. Make sure the battery is charged or that the computer is plugged in
to an external power source.
3. Save your work and close all programs.
4. From the Windows Start menu, click Turn Off Computer.
5. The Turn off computer dialog box opens.
6. Click Turn Off or press the Power button continuously for more
than 4 seconds.
Using the Reset switch
Use the Reset switch
only if you cannot turn
off the computer by any
other means, because
you may lose unsaved
data.
If the computer does not seem to be accepting input and you cannot turn it
off by using the method described in “Turning off the computer,” press the
Reset switch. (Use the stylus or a similar instrument to press the switch).
Reset switch
Chapter 2. Using the Tablet
XC6 User’s Handbook 24
Suspending and resuming operation
For more information, see
“Checking battery power status”
on page 52.
To conserve battery power when you do not want to turn off the
computer or when you need to install a charged battery pack, put
the computer into Sleep mode. (You can suspend operation
without closing any programs or Windows.)
When you suspend operation:
■
Programs that are running stop (but do not close).
■
Active data is saved.
■
The system enters one of the following low-power modes:
• Sleep (Suspend-to-RAM) mode – The Status LED light is
breathing green. Active data is saved in RAM and most
other components are turned off.
Although the computer uses very little power when in
Sleep mode, eventually the battery’s power does run out.
If you do not plan to use the computer for an extended
period of time, turn the computer off or put it in
Hibernation mode instead of Sleep mode.
• Hibernation mode – Active data is saved on the SSD
and power usage is reduced to the same level as when
the computer is turned off. In Hibernation mode,
there is no danger of losing data if battery power is
lost.
Notes:
If you have set your computer to turn power off (in the Power Options
utility in Windows Control Panel), you cannot suspend operation. To
change power settings, see “Selecting Power (On/Off)/Backlight(On/
Off)/Sleep/ Resume button options” on page 55.
In the default configuration, the P3 key puts the computer in Sleep
mode and the Power button shuts down the computer. To change
these settings, see “Programming hot keys to perform pre-defined
functions” on page 65.
If your computer is connected to a network, the network may
automatically log you off after a period of inactivity while system
operation is suspended. Contact your help desk or system
administrator to learn your log-off time limit.
Chapter 2. Using the Tablet
XC6 User’s Handbook 25
In order to suspend
operation, the Sleep
option must be enabled
in Windows Power
Options. See “Selecting
Power (On/Off) /
Backlight (On / Off) /
Sleep / Resume button
options” on page 55.
Suspending operation
Use one of the following methods to suspend operation:
Method 1
Press the P3 key.
P3
key
Method 2
1. Press the Windows Start button; then press the right arrow next to the
Shutdown button.
2. Press Sleep.
When operation is suspended, the Status LED displays a breathing
green light.
Status LED
Chapter 2. Using the Tablet
XC6 User’s Handbook 26
Resuming operation
To resume operation when the computer is in Sleep mode, press the
Power On/Off, Backlight On/Off, Suspend/Resume button.
Note: Press the button only once.
Power On/Off, Backlight On/Off,
Sleep/Resume button
Approximately 20 seconds later, the computer resumes normal
operation. When the Status LED displays a continuous green light, you
can begin using the computer.
Using the pen
You can use any of the following methods to select items and to
navigate through programs.
■
Auto-Sense mode: Use either the multifunction pen or your finger
interchangeably. The computer distinguishes between the two input
modes and automatically adjusts accordingly. This is the tablet’s
default state.
■
Digitizer mode: Use only the special multifunction pen provided
with the computer.
For more information, see “Programming hot keys to perform pre-
defined functions” on page 65.
WARNING
Do not use items such as a ball point pen or a screwdriver that can
damage the tablet. Damage caused by using an item not provided with
the tablet is not covered by the tablet warranty.
Note: During the first use of the tablet, or if the action you are
trying to perform does not occur when you use the pen or your
finger to touch the screen, calibrate the digitizer as described in
“Calibrating the digitizer” on page 75.
Chapter 2. Using the Tablet
XC6 User’s Handbook 27
Using the digitizer to perform mouse functions
To perform this function... Do this
Select an
object
(left button
click).
Tap the pen tip once on the object.
Perform a double-click. Quickly tap the pen tip twice on the object.
Perform a right-click. Hold the pen or your finger directly on the
object for 1 second.
Move or drag an object. Place the pen tip or your finger on the object;
then continue to hold the pen tip or your finger
against the screen as you move
the pen or your finger.
Changing the pen double-click speed
The pen double-click speed is in sync with the mouse double-click
speed. To change the speed, follow the instructions below.
1. Click the Windows Start button.
2. Click the Control Panel option.
3. In the Control Panel window, select Hardware and Sound >
Set up your Pen and
Tablet
.
4. Drag the slider to a faster or slower speed.
Chapter 2. Using the Tablet
XC6 User’s Handbook 28
Positioning the pen and pen tether
The pen tether helps prevent the loss of your pen. The following
illustrations show how to position the pen and pen tether.
Tether anchored at the bottom
pen tether
pen
Chapter 2. Using the Tablet
XC6 User’s Handbook 29
Tether anchored on the side
pen tether
pen
Chapter 2. Using the Tablet
XC6 User’s Handbook 30
Using the fingerprint scanner
The fingerprint scanner and the associated Protector Suite 2009
software enable you to use fingerprint verification to protect the
security of your data.
Fingerprint scanner
The first step for using fingerprint verification is to enroll your
fingerprint to create an association between your username, password, and
fingerprint.
After fingerprint enrollment you will be able to:
■
Use your fingerprint as part of computer login security.
■
Register Web pages and Windows applications to use your
fingerprint instead of passwords.
■
Launch applications by swiping your finger the sensor.
■
Store confidential information in an encrypted form in a
protected folder.
To launch the Enrollment Wizard, select:
Start > All Programs > Protector Suite > Control Center >
User Enrollment and follow the wizard’s instructions.
For more information about using the fingerprint scanner, see the
Protector Suite 2009 User’s Guide PDF included on your hard disk in the
Protector Suite 2009 folder.
Chapter 2. Using the Tablet
XC6 User’s Handbook 31
Changing the screen orientation
To rotate the screen orientation from portrait (vertical) to
landscape (horizontal) mode or from landscape to portrait
mode, press the Windows Start button (Windows 7), or rotate
the unit (Windows 8.1).
portrait mode landscape mode
Chapter 2. Using the Tablet
XC6 User’s Handbook 32
Adjusting the screen brightness
Use either of the following methods to adjust the screen brightness:
Method 1
1. Click Start.
2. Open the Control Panel.
3. In the Hardware and Sound area, select Adjust commonly used
mobility settings. Use the Brightness slider to adjust the
brightness.
Display brightness slider
Method 2
1. In the Windows taskbar, click the power management icon; then
select Adjust screen brightness.
2. Move the slider bar (located at the bottom of the window) to
change the screen brightness.
Chapter 2. Using the Tablet
XC6 User’s Handbook 33
Enabling automatic backlight control
When the Auto Light sensor is enabled, the computer automatically
controls the amount of backlight sent to the screen to provide optimum
brightness for the lighting conditions in which you are working.
Auto Light sensor
To enable automatic backlight control, see page 80.
Optimizing screen settings for outdoor use
1. Click Start > Control Panel > Appearance and Personalization >
Personalization > Change desktop background.
2. In the My Themes area, select High Contrast White.
3. Click the Back button.
4. Click Display.
5. Click Medium - 125% to enlarge the icon size; then click Apply.
6. Click Adjust Resolution. Make sure the screen resolution setting is
1024 by 768 pixels; then click OK.
Chapter 2. Using the Tablet
XC6 User’s Handbook 34
Docking the tablet
If you have the optional xStand office dock or xDock vehicle dock,
connect it to the tablet at the docking port. (See the iX104 Docking
Stations Handbook.)
Docking port
Guide pin receptacles
Connecting devices
Refer to the following subsections for information about connecting
external devices to your computer.
Note: If the device you want to use does not appear to be working
with your computer, the device may need to be enabled in the
computer’s configuration program. Contact your local help desk or
Xplore reseller.
Connecting to a local area network
Connect a local area network (LAN) cable’s RJ-45 connector to the
internal LAN interface card. (See your network system administrator for
more information.)
LAN conne
ctor
Chapter 2. Using the Tablet
XC6 User’s Handbook 35
Connecting USB-compatible devices
Connect any USB-compatible devices to the computer’s USB ports.
USB ports
Connecting an external microphone
microphone connector
Adjusting microphone volume
If necessary, adjust the volume of the microphone as follows:
1. Press the Windows Start key; then open the Control Panel.
2. Select Hardware and Sound; then select Sound.
3. Select the Recording tab.
4. Select Microphone; then select Properties.
5. Select the Levels tab.
6. Adjust the microphone volume or boost.
7. Click OK.
Chapter 2. Using the Tablet
XC6 User’s Handbook 36
Connecting a headphone or speakers
headphone/speakers connector
Adjusting headphone or speaker volume
1. Click the audio icon in the Status area of the Windows taskbar.
The volume control area
opens.
2. If the Mute button indicates that sound is muted, click the button to
turn on the sound.
3. Move the slider bar up or down to increase or decrease the
volume.
Chapter 2. Using the Tablet
XC6 User’s Handbook 37
Connecting a monitor or projection panel (optional)
Monitor/projection
panel connector
Activating the monitor or projection panel
If your tablet includes the optional monitor/projection panel
connector, you can change the video output as follows:
To change the video output to the monitor or projection
panel:
Press the Fn-P1 key combination.
To change the video output back to the computer:
Press the Fn-P1 key combination again.
Connecting a device to the serial port (standard)
If your tablet includes the standard serial port, you can connect a
terminal or other device that uses the RS-232, RS-422, or RS-485 data
transfer standard.
9-pin serial port
Chapter 2. Using the Tablet
XC6 User’s Handbook 38
Connecting an XPL expansion module
XPL expansion po
rt
Tablet with optional GPS II
Chapter 2. Using the Tablet
XC6 User’s Handbook 39
Using the battery
You can recharge, remove, and replace the battery pack.
Charging the battery pack
If you do not have an external battery charger
Follow these steps to charge the battery while it is installed in the
computer:
1. Connect a power source, such as an AC adapter or cigarette
lighter adapter, to the power connector on the computer.
Power connector
If the battery charge is below 95%, the battery begins charging and
the Status LED flashes green. (If the battery charge is higher than
95%, the battery will not charge, preventing battery overcharge.)
2. Check the level of charge. (See “Checking battery power status”
on page
52.)
The charging process continues until the battery charge reaches 100%.
Table 4 shows the approximate time required to charge the battery
level to 100%.
Table 4 Approximate battery charge time
Battery pack capacity
Charge time
Battery pack P/N
55 watt hours (7600 mAh)
1.5 hours
11-01018
68.5 watt hours (9250 mAh)
2.5 hours
11-01019
Chapter 2. Using the Tablet
XC6 User’s Handbook 40
If you have an external battery charger
1. Remove the battery pack (see page 49).
2. Use the external battery charger to charge the battery.
3. Install the battery (see page 51).
Removing and installing the battery
You can remove the battery and use an (optional) external charger to
charge it.
Removing the battery
1. To swap with a charged battery:
Use one of the methods described in “Suspending operation”
on page 32 to suspend operation.
If a charged battery is not availa
ble:
Save your work and close all running programs; then shut down
the computer or put the computer in Hibernation mode (see
“Suspending operation” on page 32).
Note: To avoid losing unsaved data, wait until the computer has
completed switching to Hibernation mode before
removing the battery.
Chapter 2. Using the Tablet
XC6 User’s Handbook 41
2. Use the stylus or a pen to depress the battery lock button.
The battery release latch returns to its original position.
Removable battery
Battery release latch
Battery lock button
3. Pull the battery away from the computer and remove it.
Note: After removing the battery, you must replace the battery or
connect the computer to an external power supply within
3 to 5 minutes or the computer completely loses power.
Chapter 2. Using the Tablet
XC6 User’s Handbook 42
Installing the battery
1. Orient the battery with the slides in the empty battery tray.
2. Slide the battery into the tray and press it firmly until it is seated.
3. Slide the battery release latch to its original position.
The lock button pops back into the locked position, securing the
battery in place.
Discarding batteries
Dispose of batteries in accordance with your local government
regulations. Under federal, state, or local law, it may be illegal to put
batteries in the trash. Contact your system administrator, municipal waste
disposal department/provider for information.
Chapter 2. Using the Tablet
XC6 User’s Handbook 43
Using power options
Displaying power options
On the Windows taskbar, click the battery icon; then select More
power options. The Power Options window opens.
Checking battery power status
On the Windows taskbar, click the battery
icon.
The following window opens, displaying the percentage of power
remaining in the battery:
Chapter 2. Using the Tablet
XC6 User’s Handbook 44
Selecting a power plan
1. On the Windows taskbar, click the battery icon.
The following window
opens:
2. Select one of the following power plans: (select More power
options in necessary)
Balanced – Balance between computer performance and battery life.
Power Saver – Longer battery life and lower performance.
High performance – Higher performance and shorter battery life.
Chapter 2. Using the Tablet
XC6 User’s Handbook 45
Selecting power options
1. On the Windows taskbar, right-click the battery icon.
2. Select Power Options.
The following window
opens.
3. Under the selected power plan, press Change plan settings.
4. Select the power options you want to use.
Chapter 2. Using the Tablet
XC6 User’s Handbook 46
Selecting Power (On/Off)/Backlight(On/Off)/Sleep/
Resume button options
Power (On/Off)/ Backlight (On/Off)/
Sleep/Resume button
To change what happens when you press the button:
1. On the Windows taskbar, right-click the battery
icon.
2. Select Power Options.
The following window
opens.
3. Press Choose what the power buttons do.
4. Select the options you want to use.
Chapter 2. Using the Tablet
XC6 User’s Handbook 47
Tips for conserving battery power
The following tips help you extend the life of your battery by
conserving battery power:
■
Use an external power source such as the AC or auto adapter
whenever available.
■
Suspend operation if you know that you will not be using the
system for a while. (See page 32.)
■
If you do not plan to use the computer for an extended period of
time, turn it off.
■
Adjust power options to automatically conserve power. (See
page 54.)
■
Adjust the display brightness to no brighter than necessary for
comfortable viewing. The display can consume a large portion of the
computer’s power. (See page 40.)
■
Set the LCD Brightness range to “Power Saving” in the BIOS
Setup Utility. (See page 79.)
Chapter 2. Using the Tablet
XC6 User’s Handbook 48
Accessing the Solid State Drive (SSD) cartridge
When you install a new storage drive, follow the instructions in this
section to access the hard drive carrier.
WARNING Failure to follow this procedure can result in damage
to the case and the cover, which is not covered under
the Xplore Technologies warranty. Xplore
recommends that you use an
approved Xplore Technologies service center for
this procedure.
1. Turn off the computer.
2. Remove all power from the unit, including batteries and other power
sources such as power supplies, cigarette lighter adapters, and
mobile power sources.
3. Pinch the two center pins with one hand while pushing down on the
lever with the other. The drive carrier will pop up (like the battery)
and permit removal.
Note: Your drive carrier may have two screws installed. If so,
remove them before you exchange the drive carrier.
Chapter 2. Using the Tablet
XC6 User’s Handbook 49
Re-installing the drive carrier
1. Insert the drive with smooth edge into the bay at a slight angle.
2. Press down until the carrier clicks into place, while pinching the two
center pins.
3. If your machine had the screws in place, re-attach them.
Note: Do not use power tools.
Chapter 2. Using the Tablet
XC6 User’s Handbook 50
Accessing the MicroSD and SIM compartment
Note: This compartment can handle
most MicroSD and SIM cards.
When you install a MicroSD or SIM card, follow the
instructions in this section to access the compartment.
WARNING Failure to follow this procedure can result in damage
to the case and the cover, which is not covered under the Xplore
Technologies warranty. Xplore recommends that you use an
approved Xplore Technologies service center for this procedure.
1. Turn off the computer.
2. Remove all power from the unit, including batteries and other
power sources such as power supplies, cigarette lighter adapters,
and mobile power sources.
3. Remove the battery. (See “Removing and installing the battery”
on page
49.)
4. Lift up on the D-ring and turn it clockwise ¼ of a rotation. Once the
lock is disengaged lift the door to open the compartment.
Opening the compartment Installing a MicroSD card Installing a SIM card
Chapter 2. Using the Tablet
XC6 User’s Handbook 51
Programming hot keys
Xplore pre-programs the P1, P2, and P3 hot keys and Function mode hot
key combinations to perform certain functions by default. However, you
can program them to perform different functions, as described in this
section.
Table 5 Programmable hot keys
Key Default function
Opens the Start
menu.
Starts Internet Explorer.
Puts the computer in Sleep mode.
Table 6 Programmable Function mode hot key combinations
Key combination Default function
Sends video display to a monitor or projection panel.
Airplane mode toggle.
Bluetooth toggle.
Chapter 2. Using the Tablet
XC6 User’s Handbook 52
Programming hot keys to start applications, open
documents, or go to a website
1. In the Status area of the Windows taskbar,
click the XC6 Configuration icon
.
The Launch Button QuickShow dialog box opens.
2. Click the Configure button.
The Panel Control Center window opens.
Chapter 2. Using the Tablet
XC6 User’s Handbook 53
3. Click the Change button next to the key or key combination
you want to program. The following options
appear:
4. Click Launch an Application, Document or Web site.
The following options appear
:
Chapter 2. Using the Tablet
XC6 User’s Handbook 54
5. To start an a
pplication:
a. Click Launch an Application.
b. Press Browse to find the application you want the
hot key or Function mode hot key combination to
start (for example: word.exe, notepad.exe, excel.exe).
c. Click Change
.
6. To open a
docu
ment:
a. Click Open a Document.
b. Press Browse to find the document you want the hot key or
Function mode hot key combination to open. (For example:
spreadsheet.xls, airports.doc, wiringdiagram.jpg)
c. Click Change
.
7. To open a multimedia file:
a. Click Open a Multimedia file.
b. Press Browse to find the name of the multimedia file you
want the hot key or Function mode hot key combination to
open. (For example: 911training.dir, demo.ppt)
c. Click Change
.
8. To open a Web
pa
ge:
a. Click Open a Web page
.
b. Press Browse to find the URL of the Web page you want the
hot key or Function mode hot key combination to open. (For
example: http://www.xploretech.com)
c. Click Change
.
9. Program more hot keys, or click Close to close the Panel Control
Center window
.
Chapter 2. Using the Tablet
XC6 User’s Handbook 55
Programming hot keys to perform pre-defined functions
1. In the Status area of the Windows taskbar, click the XC6
Configuration icon
.
The Launch Button QuickShow dialog box
opens.
2. Click the Configure button. The Panel Control Center window
opens.
Chapter 2. Using the Tablet
XC6 User’s Handbook 56
3. Next to the key or key combination you want to program, click
the Change button. The following options appear:
4. Click Start a pre-defined function.
5. In the Function selection drop-down list, select an option.
6. Program more hot keys, or click Close to close
the Panel Control Center window.
Chapter 2. Using the Tablet
XC6 User’s Handbook 57
Programming hot keys to perform other key functions
1. In the Status area of the Windows taskbar, click the
XC6 Configuration icon. The Launch Button
QuickShow dialog box opens.
2. Click the Configure button. The Panel Control Center
window opens.
Chapter 2. Using the Tablet
XC6 User’s Handbook 58
3. Next to the key or key combination you want to program,
click the Change button. The following options
appear:
4. Click Press a key or key combination.
The following options appear:
Chapter 2. Using the Tablet
XC6 User’s Handbook 59
5. If you want the hot key or hot key combination to perform the
function of a single key:
a. If the Ctrl, Alt, or Shift boxes are checked, uncheck them.
b. Click the key you want the hot key or hot key combination to
perform. (For example: F6, G, or Caps Lock)
If you want the hot key or hot key combination to perform the
function of a key combination:
a. Check the Ctrl, Alt, or Shift box.
b. From the drop-down list, select the additional key, or click
the key on the keyboard.
Examples
To cause the hot key to perform the print screen function (Alt-
Print Scrn): Check the Alt check box; then select PrtScr from
the drop-down list.
To cause the hot key to perform the paste function (Ctrl-V):
Check the Ctrl check box; then click the V key.
6. Program more hot keys, or click Close to close the Panel Control
Center window.
XC6 User’s Handbook 60
3 Maintaining the Tablet
This chapter provides instructions for maintaining your tablet.
Caring for the tablet
This section provides information about how to keep your tablet in top
working condition.
Checking power cords and connectors
Check AC and DC power cords and power connectors periodically for
damage. Replace the power cord immediately if you find any damage.
Protecting the computer from damage
■
Your computer is designed to sustain a multiple-axis drop to a non-
yielding surface. Do not intentionally drop the computer, because the
cumulative effects of multiple drops may damage the computer.
■
Do not place heavy objects on the computer.
■
Do not disassemble the computer.
■
Keep the computer at least 5 inches (13 centimeters) away from any
electrical appliance that generates a strong magnetic field,
such as a motor, magnet, TV, refrigerator, or large audio speakers.
Chapter 3. Maintaining the Tablet
XC6 User’s Handbook 61
Preventing the computer from overheating
The computer monitors its internal temperature. As the internal
temperature approaches the tolerable limits of heat-sensitive components,
system functions are automatically limited or turned off to prevent
damage.
To prevent the computer from overheating, do not obstruct the
computer’s air vents.
air vent area
air vents
Chapter 3. Maintaining the Tablet
XC6 User’s Handbook 62
Storing the computer
You can store the computer in the Off state for about 30 days with a fully
charged battery installed. After this period, recharge the battery or
replace it with a charged battery.
If you intend to store the computer for more than 30 days, remove the
battery pack and keep it in a cool place.
Caring for the display screen
To clean the display screen, dampen a soft cotton cloth with water and
gently wipe the screen surface.
Note: Do not use isopropyl alcohol to clean the screen. Alcohol
may damage the surface of the screen.
Protecting the display screen
The screen protector is a durable, replaceable writing surface that
protects the display screen from abrasion.
To obtain additional screen protectors, check with your reseller, or go to
the Xplore Web site at www.xploretech.com for ordering information.
Additional information about installation is included with the screen
protectors.
Chapter 3. Maintaining the Tablet
XC6 User’s Handbook 63
Removing the screen protector
Slide your fingernail under the edge of the screen protector and pull the
protector away from the screen.
edge
Installing a new screen protector
Follow the instructions included with your screen protector
replacement kit.
Note: If a screen protector is already installed on the display
screen, remove it before installing the new screen protector.
When to replace the pen
With use, the pen tip may become worn and can scratch the screen. If
your pen exhibits one of the following problems, replace the pen:
■
The pen does not move freely across the screen.
■
The pen does not perform as expected.
Chapter 3. Maintaining the Tablet
XC6 User’s Handbook 64
Calibrating the digitizer
Calibrating the digitizer adjusts the cursor position on the screen relative
to the position of the pen tip or finger. Calibrate the digitizer to adjust the
distance error between where the pen or finger is actually touching the
screen and where the computer is registering the pen or finger touch.
You may need to calibrate the digitizer in the following situations:
■ You are using the computer for the first time.
■ The previous user of the computer writes with the opposite hand or
at a different pen angle.
■ The computer has not been used for some time.
■ The computer has been serviced.
1. From the Start menu, select Control Panel. The Control Panel opens.
Chapter 3. Maintaining the Tablet
XC6 User’s Handbook 65
2. Select Hardware and Sound.
Hardware and Sound
3. In the Tablet PC Settings area, select Calibrate the screen for pen or
touch input; then follow the instructions that appear on the screen..
Calibrate the screen
for pen or touch input
XC6 User’s Handbook 66
A Troubleshooting
Table 7 contains solutions to some problems. If you cannot solve the
problem by taking the actions described, contact your local help desk or
your reseller for further assistance.
Table 7 Troubleshooting
Problem Possible cause and solution
Computer will not start. • The battery may be defective or discharged to a critically low level.
Connect an external power supply (such as the AC adapter) or
install a charged battery. See “Using the battery” on page 48.
• Internal components may be above or below the acceptable operating
range (below -20° C or above 60° C). After the temperature returns to
safe operating range the computer will start.
The computer will not resume
operation after being suspended.
• The battery may be defective or discharged to a critically low level.
When the battery reaches a critically low level, the computer is forced
into Sleep mode to avoid a total system power failure. Connect an
external power supply (such as the AC adapter) or install a charged
battery. See “Using the battery” on page 48.
• The computer may be at the critical thermal limit. To avoid damage to
heat-sensitive components, the computer enters Sleep mode when the
computer operates above 60° C. Operation automatically resumes
when the computer cools to below 60° C. Move the computer to a cooler
location.
The Status LED is red, continuous. • The computer is on, running under battery power, and the charge level
in the battery has reached a critical level. Plug the computer into an
AC/DC power source or install a charged battery.
• The system has encountered a fault and is preventing normal
operation. Contact your local help desk.
The Status LED is red, blinking. The computer is powered on, running under battery power, and the
charge level in the battery is at a minimum warning level. Plug the
computer into an AC/DC power source or install a charged battery.
Appendix A. Troubleshooting
XC6 User’s Handbook 67
Table 7 Troubleshooting (continued)
Problem Possible cause and solution
Display screen is blank or
difficult to read.
• Confirm that the computer is on (the Power icon is displayed
continuously in the Status area).
• The brightness may be set too low, causing the screen to appear too dark. To
change system brightness, press the Fn and Start keys to open the Xplore
menu and adjust the brightness. (See page 27.)
• An external monitor may be selected. Press the Fn and P1 keys to select
the computer display screen. (See page 27.)
• The video time-out may have expired. Tap the display screen to
reactivate the display.
Note: This is a normal, power-saving feature.
• If the Status light is blinking red, the computer is in Sleep mode because the
temperature is below -20° C or above 60° C. When the temperature returns
to a safe operating range, the display screen automatically comes back on. If
possible, move the computer to a warmer or cooler location.
• If the Status light is continually yellow, the computer is in Sleep or
Hibernate mode. Press the Power On/Off key to resume.
Cursor is not tracking the pen. Calibrate the pen. See “Calibrating the digitizer” on page 75.
Computer not responding to pen. Connect an external USB keyboard to the computer. If the computer does
not respond to the external keyboard, the application or operating system
may have been corrupted. Press the Reset key. (See page 30.) If the system
responds to a keyboard but not to the pen, contact your local help desk or
reseller for further assistance.
Headphone or speaker volume is
too low.
• The volume may be in Mute mode or set too low. Follow the
instructions in “Adjusting headphone or speaker volume” on page 45.
• Make sure the volume control in your audio software is set to an audible
level.
An external device is not working
with the computer.
The device may need to be enabled in the computer’s configuration program
(BIOS Setup). Contact your local help desk or reseller.
XC6 User’s Handbook 68
B Using BIOS and AOS Functions
Note: Each button has its own
blue-light LED. No matter which
button you press, every blue-light
LED is on for about 3 seconds,
then off. When in Shifted mode,
all blue-light LEDs flicker.
This appendix explains how to use the application and navigation
buttons with the Basic Input-Output System (BIOS) program and
the Advanced Operating System (AOS) Options menu.
Note: These functions are typically for use only by your
system administrator or by authorized service technicians.
Table 8 Using BIOS and AOS functions
In Shifted Mode
Button BIOS Key Function
BIOS Key Function
F1 F1 continues message.
Up Arrow Navigate up through Multi Boot
options and BIOS menus.
F2 Start the BIOS program: When the
computer is booting, press the P2
button and follow the instructions
that appear on the screen.
Down Arrow Navigate down through Multi
Boot options and BIOS menus.
F8 Prompt Windows to select Safe
mode.
Right Arrow Navigate to the right.
F11 • Press for less than one second for
(Lock Fn) F11 function.
• Press longer to enable Shifted
mode.
Release Press once to exit Shifted mode.
Function
Start Windows Start Button
None
Ctrl+Alt+Del Reboot.
Enter Enter.
XC6 User’s Handbook 69
Appendix B. Using BIOS and AOS Functions
Disabling the Auto Power feature
Note: When the tablet is
in the docking station, it
will shut down or go into
Hibernation
or Sleep mode the same
as it does when not in
the docking station.
When Auto Power is enabled, the tablet automatically turns on if you dock it
and the following conditions exist:
■
The tablet is off or in Hibernation or Sleep mode.
■
The dock or the tablet is connected to an external power source
(including power applied when a vehicle’s ignition is started).
If you dock the tablet and the tablet is off and no power is present, the tablet
turns on as soon as power is applied.
To disable the Auto Power feature:
1. When the computer is booting, press the P2 button to access the
BIOS Setup Utility.
2. Select the Advanced tab.
3. Disable the Dock with Auto Power On option.
Enabling automatic LCD backlight control
When the LCD backlight control is in manual mode, the ambient light
sensor is disabled and the computer does not automatically control the
screen brightness.
Follow these steps to enable automatic LCD backlight control:
1. When the computer is booting, press the P2 button to start the
BIOS Setup
Utility.
2. Select the Main tab.
3. In the LCD Backlight Control drop-down list, select Automatic.
4. Click OK.
XC6 User’s Handbook 70
C Glossary
Adapter. A device that provides an interface between two dissimilar
electronic devices. For example, the AC adapter modifies the power from
a wall outlet for use by the computer.
Advanced Power Management (APM). A facility consisting of one or
more layers of software that support power management. The APM
software interface enables applications, operating systems, device drivers,
and the APM BIOS to work together to reduce power consumption.
Alternating Current (AC). Electric current that reverses its direction of
flow at regular intervals.
Analog signal. A signal with characteristics such as amplitude and
frequency that vary in proportion to (are an analog of) the value to be
transmitted. Voice communications are analog signals.
Application. A program that performs specific tasks on your
computer, such as word processing or creating spreadsheets.
BIOS. Programs that contain such basic hardware operations as an
interaction with diskette drives, hard disk drives, and the memory.
Board. A circuit board. An internal card containing electronic
components called chips, which perform a specific function or
increase the capabilities of the system.
Boot. To load a program or operating system into system memory.
Bits Per Second (BPS). In serial transmission, the instantaneous bit
speed with which a device or channel transmits a character.
Card. Synonym for board; see board.
Compact Disk-Read Only Memory (CD-ROM). Stores data on
metal-plated plastic discs.
Compatibility. 1.The ability of one computer to accept and process data
in the same method as another computer without modifying the data or
the media upon which it is being transferred. 2.The ability of one device
to connect or communicate with another system or component.
Configuration. The specific combination of hardware components of the
computer, and their operating status. The configuration of your computer
includes pre-defined memory, type and speed of microprocessor, type of
Appendix C. Glossary
XC6 User’s Handbook 71
and size of hard disk drive, etc.
Default. The preset parameter value automatically selected by the
computer when you or a program do not provide instructions.
Device driver. A program that controls communication between a
specific peripheral device (such as a printer or the pen/stylus) and the
computer.
Disk drive. The physical device that enables the computer to read
from, and write to, a disk.
Display. An image-producing device used to view computer output.
Double-click. To press and release the pen/stylus twice within a time
frame you define, without moving the pointer off the choice.
Hardware. The physical electronic and mechanical components of a
computer system. typically, the computer itself, CPU, memory, etc.
Hertz. A unit of wave frequency that equals one cycle per second.
Interface. 1. Hardware and/or software components used specifically to
connect one computer or device to another. 2. To physically connect one
system or device to another to exchange information. 3. The point of
contact between user, the computer, and the program (for example, the
pen/stylus or a menu).
JBOD. Two drives that appear in Window as two drives, Drive C and
Drive D.
Kilobyte (KB). A unit of 1024 bytes measuring storage space,
typically in memory or on storage media such as a diskette or hard disk
drive.
Local area network (LAN). Assembly of separate computers into an
integrated network that connects the various computers together and to
common devices such as printers and fax machines.
Light Emitting Diode (LED). A semiconductor device that emits
light when a current is applied.
Liquid Crystal Display (LCD). liquid crystal sealed between two sheets
of glass coated with transparent conducting material. Applying a voltage
between the glass sheets darkens the liquid crystal
to
provide contrast to
lighted portions of the display.
Megabyte (MB). A unit of data storage equal to 1024 kilobytes.
Appendix C. Glossary
XC6 User’s Handbook 72
Megahertz (MHz). a unit of wave frequency that equals 1 million
cycles per second.
Modem. A device that connects your computer to a telephone line,
allowing it to communicate with another computer at another location.
Pen. See stylus.
Peripheral device. An input/output device that is external to the
central processor and/or main memory such as a printer or scanner.
Pixel. Picture elements (tiny dots) that compose a screen image.
Port. The electrical connection through which the computer sends and
receives data to and from devices or other computers.
Program. A set of instructions a computer can execute to tell the
system what to do and how to do it.
RAID 0. Two drives appear in Windows as one larger drive (two
80GB drives appear as one 160GB drive).
RAID 1. One drive has information mirrored to a duplicate drive. For
example, information from one 80GB drive is mirrored to another
80GB drive. The two drives appear in Windows as a single drive.
Random Access Memory (RAM). A hardware component of your
computer that temporarily stores active program code and data.
Reset. The act of hard stopping/shutting down the operating system.
Resolution. The number of pixels displayed on the screen. A higher
resolution provides greater clarity and allows more information to be
displayed on the screen at once.
Restart. Resetting a computer without turning it off (also called
warm boot or soft reset).
Resume. The act of returning the computer to an active, operational
state.
Read Only Memory (ROM). The portion of your computer’s memory
that contains permanent instructions, and which cannot be modified.
Sleep mode. A power conservation mode in which electrical current is
removed from most components of the computer.
Solid State Drive (SSD). A sealed mass storage device used for storage
and fast retrieval of programs and data. The SSD is contained in a drive
Appendix C. Glossary
XC6 User’s Handbook 73
cartridge for easy removal.
Status Indicator (LED). a light above the LCD screen which
indicates the current status of a particular device or hardware
component.
Stylus. A writing instrument. For pen computers, the stylus is used to
interface with the LCD and digitizer.
Subscriber Identity Module (SIM). A smart card inside a GSM
(Global System for Mobile communications) cellular device that
encrypts voice and data transmissions and stores data about the specific
user so that the user can be identified and authenticated by the network
supplying the phone service. A SIM can be moved from one device to
another and/or different SIMS can be inserted into any GSM radio.
Universal Serial Bus (USB). A serial interface that enables
communication between devices and the computer.
XC6 User’s Handbook 74
D Hardware Specifications
Physical
Dimensions
11.20” x 8.25” x 1.6” (WxHxD)
283.9mm x 209.3mm x 40.8mm
Weight
5.40 lbs
(2.45 kgs)*
* Varies according to your computer’s configuration.
Processing
CPU / Chipset *
Intel® Core® i7-4650U
Intel® Core® i5-4300U
Intel® Celeron® 2980U
Cores / Threads
2 / 4
2 / 4
2 / 2
Clock / Turbo Speed
1.7 / 3.3 GHz
1.9 / 2.9 GHz
1.6 GHz
L2 Cache
4 MB
3 MB
2 MB
Graphics
Intel® HD Graphics 5000
Intel® HD Graphics 4400
Intel® HD Graphics
Graphics Frequency
200 MHz - 1.1 GHz
200 MHz - 1.1 GHz
200 MHz - 1.0 GHz
Number Displays Supported
3
3
3
Intel® vPro Technology
Yes
Yes
No
Intel® Hyper-Threading Tech.
Yes
Yes
No
Trusted Execution Technology
Yes
Yes
No
* Varies according to your computer’s configuration.
Memory/storage
Main RAM
4 GB, 8 GB, or 16 GB DDR III RAM (4GB standard)
144-pin SODIMM modules
BIOS ROM
16Mb
Storage
60GB SSD, 120GB SSD or 240GB SSD, single or dual;
RAID 0/1 and AHCI support
* Varies according to your computer’s configuration.
Appendix D. Hardware Specifications
XC6 User’s Handbook 75
Display
I
n
t
e
r
f
a
c
e
User Interfaces
Display
• 10.4” TFT XGA (1024x768), 16M colors, 32-bit True-color LCD
• Active Digitizer / Pen
• Advanced Matrix Resistive Touch Panel with ten-finger multi-
touch
• Dual Mode operation of digitizer and touch.
• Brightness: 100 levels
- 1300 nits max before touch (Sunlight-Readable)
- 340 nits max before touch (Indoor-Readable)
• Viewing Angle:
- Horizontal: 80 degrees (Typical, Contrast Ratio > 10)
- Vertical: 80 degrees (Typical, Contrast Ratio > 10)
- Contrast Ratio: Typ. 600:1, Min 400:1
Wireless Radio Bays
• One M.2 PCI Express slot for WWAN (4G / LTE)
• One half mini-PCI Express slot for WiFi
Integrated Interfaces
• DC-in
• USB 3.0 (2)
• Microphone / Headset Combination Jack
• LAN (RJ-45)
• 9-pin serial port (standard), or
15-pin D-SUB VGA connector (optional), or
HDMI connector (optional)
KeyPad / User Controls
• Application buttons with primary and
secondary functions
• Power On/Off/Suspend/Resume button
• Emergency Shutoff/Reset button
Audio
• Realtek ALC283
• On-board microphone with noise cancellation
• On-board integrated stereo speakers (1W each)
Status Indicators
Power / Charge / DC-in / Warning / Camera Active
Appendix D. Hardware Specifications
XC6 User’s Handbook 76
Power
Main Battery
• 10 cell, Xplore Part Number 11-01022
• Removable Lithium-Ion
• 7.6 V @ 10.625 Ah (80.75 Whr)
• Warm-swappable
• Recharge time: 2.5 hours (100%)
• Life: Up to 8 hours. (Battery life is dependent on operating
system, power management, and applications in use.)
• Suspend life: Min. 7 days
• Off state: Approximately 90 days
Bridge Battery
• 6-cell Li Ion, 45mAh
• Life: (with Suspend-to-RAM on bridge battery only): 3 to 5
minutes from full charge
AC Adapter
• Xplore Part Number 11-50048
• FSP Part Number FSP065-REB
• Power Adapter, 100-240V AC input (Auto-sensing), 19V DC @
3.42A output, ROHS, Energy Star, , CE, UL, TUV
Appendix D. Hardware Specifications
XC6 User’s Handbook 77
Environmental
Temperature
•
Operating:
-7o to 140o F (-20o to 60o C) (XC6-M minimum is
-49
o
F,-45o C)
•
Storage:
-40o to 167o F (-40o to 75o C)
Humidity
0% to 95% non-condensing
Shock/Drop
Four-foot drop to concrete, all surfaces, edges and corners
Vibration
0.04g^2/Hz, 20 Hz - 1000 Hz
-6dB/octave 1000 Hz - 2000 Hz
Enclosure Class
Blowing rain:
4”/hr, 40 mph wind and
MIL-STD-810G Method 506.5 Procedure 1
Ingress protection:
IEC (60529) ingress tested to an IP67 standard
Sand and dust:
Particle size < 149 µm, 10 + 7 g/m3 particle density 1.5 m/s to 8.9
m/s wind speed
MIL-STD-810G Method 510.5 Procedure 1 and II
Salt Fog:
5% saline for 48 hr (12 hr wet, 12 hr dry, 2 cycles) MIL-
STD-810G Method 509.5
Contamination by fluids:
Detergents, brake fluid, aromatic hydrocarbons
MIL-STD-810G Method 504.1
Solar radiation:
1120 W/m2 (355 Btu/ft2/hr) UVB @ 50° C, 7x24 hr cycles
MIL-STD-810G Method 505.5, Procedure II
Appendix D. Hardware Specifications
XC6 User’s Handbook 78
Agency approvals
EMC
• CFR 47, FCC part 15B, IC ICES-003
• European Union Directive 2004/108/EC RTT&E
Safety
• TUV Bauart, RoHS, 2002/95/EC, WEEE
• IEC600950-1 2nd Ed., EN60950-1 2nd Ed.,
UL60950-1 2nd Ed.
• ETL Listed:
ANSIISA-12.12.01-2007,
C22.2 No. 213
• UL1604
Operating Systems
Operating Systems
• Microsoft Windows 7 Professional, 32-
bit
– English
• Microsoft Windows 7 Professional,
64-bit
– English
• Microsoft Windows 8 Professional ,
64-bit
– English
Appendix E. Agency Notices
XC6 User’s Handbook 79
E Agency Notices
FCC notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Modifications not expressly approved by Xplore Technologies could void this
user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Appendix E. Agency Notices
XC6 User’s Handbook 80
IC regulations
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement."
CAN ICES-3 (B) / NMB-3 (B)
The device could automatically discontinue transmission in case of
absence
of
information to transmit, or operational failure. Note that this is not intended to
prohibit transmission of control or signaling information or the use of repetitive
codes where required by the technology.
The device for the band 5150-5250 MHz is only for indoor usage to reduce
potential for harmful interference to co-channel mobile satellite systems; the
maximum antenna gain permitted (for devices in the bands 5250-5350 MHz and
5470-5725 MHz) to comply with the e.i.r.p. limit; and The maximum antenna
gain permitted (for devices in the band 5725-5850 MHz) to comply with the
e.i.r.p. limits specified for point-to-point and non point-to-point operation as
appropriate, as stated in section A9.2(3). In addition, High-power radars are
allocated as primary users (meaning they have priority) of the band
5250-5350 MHz and this radar could cause interference and/or damage to LE-
LAN devices.
The County Code Selection feature is disabled for products marketed in the
US/Canada. For product available in the USA/ Canada markets, only channel
1~11 can be operated. Selection of other channels is not possible.
IC radiation exposure statement
This EUT is compliance with SAR for general population/uncontrolled
exposure limits in IC RSS-102 and had been tested in accordance with the
measurement methods and procedures specified in IEEE 1528.
Appendix E. Agency Notices
XC6 User’s Handbook 81
Appendix E. Agency Notices
XC6 User’s Handbook 82
RF exposure
Tests for SAR are conducted using standard operating positions specified by the
FCC with the tablet PC transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is determined at the highest certified
power level, the actual SAR level of the tablet PC while operating can be well
below the maximum value. This is because the tablet PC is designed to operate at
multiple power levels so as to use only the power required to reach the network.
In general, the closer you are to a wireless base station antenna, the lower the
power output.
Before a tablet PC model is available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the limit established by the
government-adopted requirement for safe exposure. The tests are performed in
positions and locations (e.g., on the body) as required by the FCC for each model.
(Body-worn measurements may differ among tablet PC models, depending upon
available accessories and FCC requirements). While there may be differences
between the SAR levels of various tablet PCs and at various positions, they all
meet the government requirement for
safe
exposure.
This device was evaluated and shown to comply with FCC SAR guidelines.
Avoid covering or holding antennas when transmitting. Antenna locations are
shown in the following figure.
Antennas
Bluetooth
antenna
Appendix E. Agency Notices
XC6 User’s Handbook 83
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Your wireless tablet PC is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of
t
h
e
U.S. Government as well as the RTT&E directive. These limits are part of
comprehensive guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on the safety standards previously
set by both U.S. and international standards bodies:
■
American National Standards Institute (ANSI) IEEE. C95.1-1992
■
National Council on Radiation Protection and Measurement (NCRP).
Report 86. 1986
■
International Commission on Non-Ionizing Radiation Protection
(ICNIRP) 1996
■
Ministry of Health (Canada), Safety Code 6. The standards include a
substantial safety margin designed to assure the safety of all persons,
regardless of age and health.
■
European Union RTT&E Directive for SAR
The exposure standard for wireless mobile tablet PCs employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR limit set
by the FCC is 1.6W/kg. The SAR limit set by the RTT&E is 2.0W/kg.
Note: In the U.S. and Canada, the SAR limit for mobile tablet PCs used by the
public is 1.6 watts/kg (W/kg) averaged over 1 gram of tissue. In Europe the SAR
limit for mobile table PCs used by the public is 2.0 watts/kg (W/kg) averaged over
10 grams of tissue. The standard incorporates a substantial margin of safety to
give additional protection for the public and to account for any variations.
DOC (Industry Canada Notices)
Notice to Users of Radio and Television
This Class B digital apparatus meets all requirements of Canadian
Interference-Causing Equipment Regulations per the ICES-003
CET appareil numérique de la class B respecte toutes les exigence du
Réglement sur le matérial brouilleur du Canada.
Appendix E. Agency Notices
XC6 User’s Handbook 84
Notice to Users of the Canadian Telephone Network
Notice: This equipment meets the applicable Industry Canada Terminal Equipment
Technical Specifications. This is confirmed by the registration number. The
abbreviation, IC, before the registration number signifies that registration was
performed based on a Declaration of Conformity indicating that Industry Canada
technical specifications were met. It does not imply that Industry Canada approved
the equipment.
Before connecting this equipment to a telephone line the user should ensure that it
is permissible to connect this equipment to the local telecommunication facilities.
The user should be aware that compliance with the certification standards does
not prevent service degradation in some situations.
Repairs to telecommunication equipment should be made by a Canadian
authorized maintenance facility. Any repairs or alterations not expressly
approved by Xplore or any equipment failures may give the
telecommunication company cause to request the user to disconnect the
equipment from the telephone line.
Notice: The Ringer Equivalence Number (REN) for this terminal equipment is
0.0. The REN assigned to each terminal equipment provides an indication of the
maximum number of terminals allowed to be connected to a telephone interface.
The termination on an interface may consist of any combination of devices subject
only to the requirement that the sum of the Ringer Equivalence Numbers of all the
devices does not exceed five.
UL Notice
This unit requires an AC adapter to operate. Use only UL Listed
Class 2 Adapters with an output rating of 19 VDC, with a current of 3.75 A. AC
Adapter output polarity:
For authorized repair technicians only
WARNING
For continued protection against risk of fire, replace only with the same
type and rating fuse.
WARNING
Danger of explosion if Lithium (clock) battery is incorrectly replaced.
Replace only with the same equivalent type recommended by the
manufacturer. Dispose of used batteries according to the
manufacturer’s instruction.
Appendix E. Agency Notices
XC6 User’s Handbook 85
System disposal
In the event of system disposal, observe the following information regarding
proper procedures in the State of Vermont.
The liquid crystal display (LCD) lamps used in this system contain mercury. In
the event of system disposal, be sure to follow local guidelines.
Intel® Dual Band Wireless-AC 7260 Country-specific Compliance
Statements
Hereby, Xplore Technologies, declares that the Intel® Dual Band Wireless-AC
7260 complies with the essential requirements and other relevant provisions of
Directive 1999/5/EC. This equipment is marked with the CE symbol and can be
used throughout the European community.
Sierra EM7355 Country-specific Compliance Statements
Hereby, Xplore Technologies, declares that the Sierra EM7355 complies with
the essential requirements and other relevant provisions of Directive
1999/5/EC. This equipment is marked with the CE symbol and can be used
throughout the European community.
Appendix E. Agency Notices
XC6 User’s Handbook 86
Declaration of
Conformity
Xplore
T
echn
olog
i
es
,
Corp.
h
e
r
e
by
declares
under our
so
l
e
r
espons
i
bi
lity
that the
produc
t
./
Name:Wildcat
6
./
Mode
l
:
XC6
To
wh
i
c
h
t
h
i
s
dec
l
a
r
a
t
ion
r
e
l
ates
,
i
s
in
compliance
w
i
th
a
ll
the
app
licable
essent
i
a
l
requriements,and
ot
h
e
r
provsi
ions
of
the
E
u
ropea
n
Co
unci
l
D
i
rec
t
ives
l
is
ted
.
The conformity
assessment
procedure used
f
o
r
th
i
s
dec
l
arat
ion
is
Annex IV of
D
i
rectiv
e
1999
/
5/
EC
.
T
h
is
product will
bear
t
h
e
CE
Mark
l
ab
e
l
(
C
E
!)
DRI
E
C
T
I
VES
:
•
Directive
20041108/EC
(
E
MC
D
i
r
ec
t
iv
e
)
•
Directive
2006195/EC
(low
Vo
l
t
a
g
e
D
i
r
ec
t
iv
e
)
•
Directive
199915/E
C
(
Rad
i
o
an
d
Te
l
ecomm
u
n
ica
i
t
ons
Tenm
i
n
at
E
Q
u
i
pme
nt
)
(R&TTE
D
i
r
ec
.,
e
)
•
Directive
2002196/EC
(Waste
of
E
ectrica
l
a
n
d
E
l
ec
t
r
o
n
ic
E
Q
u
i
pme
nt
)
(WEEE
D
i
r
ec
t.,e
)
•
Directive
2002195/E
C
(
Rest
rictio
n
of
Hazardous
S
u
bs
t
ances
)
(RoHS D
i
r
ec
t
i
ve
)
Product compliance
has
bee
n
demonstratedon
the
bas
i
s
of
:
S
T
ANDARDS
:
•
EN
5
5022:
2006
/
A
1
:200
7
(
C
l
a
ss
B
)
•
E
N
5
5024:
1
998
/
A
1
:200
1
/
A
2
:
2003
•
EN
6
1
000-3
-
2
:
2
006
+
A2:2009
•
EN
6
1
000
-3-
3:20
08
•
EN
6
1
000-4
-
2
:
2
009
EN
6
1
000
-
4
-
3:20
06
+
A2:2
0
1
0
•
E
N
6
1
000
-
4
-4
:
2004
+
A
1
:20
10
•
EN
6
1
000-4
-
5
:
2
007
•
E
N
6
1
000
-
4-6:2009
•
EN6
1
000-4-8
2
:
0
1
0
•
EN
6
1
000
-
4
-
11
:
2
00
5
•
E
N
60950
-
1
:2006+A
11
•
ATEX
1
1
3G
Ex nA
II
C
T4
E
N
5037
1
:
2002
E
N
30
1
489-1 V
1
.
8
1
.
(
2
008
)
E
N
30
1
489-07
V1.31.
(
2005
)
E
N
30
1
489-17
V2
1
.
.
1
(
2009
)
E
N
30
1
489-24 V
1.
4
1
.
E
N
300328V
1.
7
1
.
(
2
006
-
1
0)
E
N
30
1
893
V
1.5.
1
E
N
30
1
5
11
V9.0.2
(
2
000
-
1
2
)
E
N
30
1
908-
1
V3
.
2
1
.
•
E
N
30
1
908-2
V3.2
1
.
E
N
60079-Q
:
2006
E
N
60079-
1
1
:
2007
E
N
60079-
1
5
:
20
0
22
J
une
2011
A
u
st
i
n
,
TX
,
USA
J
ason
L
.
Moreland
Regu
l
a
t
ory
and
C
o
mpl
i
anc
e
Spec
i
al
is
t
TOO
ch
n
i
ca
l
con
st
ru
ction
fik
!
i
s
k@
pt
availa
at
:
Xp+!J
r
e
T
ecMolog
i
es
Corp
.
14000
Summ
i
t
D
r
.
St
e
900
A
us
ti
n
,
TX
7B728
USA
888-44-
X
P
LO
FIE.
.
FAX
:
5
12-485-1
505
,
wt.w
.xplorn
toc:h
.
c
o
m
Da
t
e
((
<D
P
l
ace
PN 9S-O1200
Rev
C
Appendix E. Agency Notices
XC6 User’s Handbook 87
XC6 User’s Handbook 88
Intel® Dual Band Wireless-AC 7260 - Regulatory USA
Intel® Dual Band Wireless-AC 7260 - Regulatory Europe
XC6 User’s Handbook 89
F Environmental Policy and Recycling Program
Environmental policy
Xplore Technologies is committed to managing health, safety and
environmental (HS&E) matters as an integral part of our business. In
particular, it is our policy to assure the HS&E integrity of our processes
and facilities at all times and at all places. We will do so by adhering to the
following principles:
Compliance
We will comply with applicable laws and regulations and will
implement programs and procedures to assure compliance.
Compliance with HS&E standards will be a key ingredient in the
training, performance reviews, and incentives of all employees.
Risk reduction, prevention, and resource management
We will seek opportunities, beyond compliance requirements, for
reducing risk to human health and the environment, and we will
establish and meet our own HS&E quality standards where appropriate.
We will employ management systems and procedures specifically
designed to prevent activities and/or conditions that pose a threat to
human health, safety, or the environment. We will look for ways to
minimize risk and protect our employees and the communities in which
we operate by employing clean technology, including safe technologies
and operating procedures, as well as being prepared for emergencies.
We will strive to minimize releases to the air, land, or water through use
of cleaner technologies and the safer use of chemicals. We will minimize
the amount and toxicity of waste generated and will ensure the safe
treatment and disposal of waste. We will manage scarce resources, such as
water, energy, land, and forests in an environmentally sensitive manner.
Appendix E. Agency Notices
XC6 User’s Handbook 90
Communication
We will communicate our commitment to HS&E quality to our
employees, vendors, and customers. We will solicit their input in
meeting our HS&E goals and in turn will offer assistance to meet
their goals.
Continuous improvement
We will measure our progress as best we can. We will review our
progress at least on an annual basis. We will continuously seek
opportunities to improve our adherence to these principles, and will
periodically report progress to our stakeholders.
Take back and recycling program
Recycling Program
Send us your unwanted Xplore products and/or batteries, or find a recycling center near you. If your old Xplore
product and/or batteries has no value or you want to recycle it in a socially and environmentally responsible
manner, go to the Contact Support page and submit a technical support request.
Navigate to the "Technical Support" form and fill in the remaining fields. Under "Message" type in "I want to recycle
my product". Click "Submit" and a Xplore Technologies specialist will contact you with shipping instructions.
An Xplore Technologies specialist will contact you with shipping
instructions.
Alternatively, you can leave your unwanted Xplore products at a local
recycling center. For batteries, Xplore Technologies has partnered with
Call2Recycle®
(http://www.call2recycle.org/).
Call2Recycle is
a program of the Rechargeable Battery Recycling Corporation (RBRC)
that promotes environmental sustainability by providing free battery and
cell phone recycling in North America. RBRC is a
501(c)4 nonprofit public service organization.
If you prefer to have Xplore Technologies recycle your battery packs,
submit a technical support request as described above.
Appendix E. Agency Notices
XC6 User’s Handbook 91
Appendix E. Agency Notices
XC6 User’s Handbook 92
For the return of any Xplore product other than batteries, Xplore
Technologies has partnered with R2 Solutions (http://
www.r2solutions.org/). R2 Solutions (R2S) is a non-profit organization
established to promote R2 practices as a major step towards making
responsible electronics recycling business as usual across the United
States and abroad. To find a location near you, go to R2 certified
recycler locations (http://asoft552.accrisoft.com/ certified/electronic-
recyclers-with-r2-certified-facilities/).
If you do not have access to the Internet, contact our technical support at
(866) 296-8541 ext. 222.
Environmental and Sustainability Corporate Report
As the manufacturer of the world’s most advanced ruggedized tablet PC
and peripherals, Xplore Technologies is recognized for the efficient
design and manufacturing of it products. In our inaugural Environmental
and Sustainability Corporate Report we outline our plans and aspirations
to sustain our environment. As you review this report, we welcome your
candid feedback. We know that CSER is a journey and your input will
help us along the way.
In 2011, Xplore Technologies Corporation of America established the
Xplore Technologies Environmental committee to proactively work with
stakeholders including customers, nongovernmental organizations
(NGOs), and other interested groups on environmental issues. As a result
of the committee's work, we have implemented initiatives to improve our
performance across the spectrum of corporate environmental
responsibility issues. Our progress on implementing these issues is
outlined in this report.
Although the Xplore Technologies Environmental committee has only
been active since 2012, we have always cared for the environment and
this has been a core value since Xplore Technologies was founded more
than 15 years ago. We are proud of our accomplishments to date and, we
are committed to continuously improve in the future.
Appendix E. Agency Notices
XC6 User’s Handbook 93
Publishing this report is a significant step toward the goal of becoming an
environmental sustaining leader of our industry. Going forward, we will
persist to perfect our environmental
performance and
transparency. We
will also leverage our role as an industry leader and actively support
international organizations and industry associations working to improve
environmental conditions.
The Xplore Technologies 2012 Environmental and Sustainability
Corporate Report is located at http://www.xploretech.com/ environment.
To obtain the report, click Environmental Sustainability Report 2012. Feel
free to save this to your personal files. If you do not have access to the
Internet, call Xplore technical support at (866) 296-
8541 ext. 222 and request that a digital copy be sent to your email
address.
Index
A
air flow vents, location 21 ambient light
sensor, location 19 antenna covers,
location 20
Auto Light sensor, disabling 41
Auto Power feature, disabling 80
B
battery pack
charge time 49
charging 48
checking the charge 48
conserving power 56 installing
51
location 20
removing 49
battery release latch, location 20
BIOS Setup Utility, using 79
C
convection air flow cover, location 20
D
digitizer calibrating 75
using to perform mouse functions 35
double-click, performing with pen 35
dragging and dropping, performing with pen 35
E
Environmental and Sustainability Corporate
Report 107
Environmental policy 105
H
headphone connector, location
22 headphone volume,
adjusting 45 headphone,
connecting 45
Hibernation mode, description 31
hot keys, programming 61
hot keys, programming,
see keys, programming hot
keys
I
Internet Explorer, starting 27
iX104
accessories 15
preventing overheating
72 protecting from
damage 71 storing 73
K
Kensington lock slot, location 21
keys
Ctrl-Alt-Del 27
description 27
Ctrl-Alt-Delete
location
26
descriptions 27
Function
description 27
location 26
Function mode hot key
combinations default
functions 60 descriptions
27
P1
default function 60
location 26
XC6 User’s Handbook
109
Index
P2 default function
60 description
27 location 26
P3
location 26
P
pen
double-click speed, changing 35
dragging and dropping
35
holder,
location 20
Power On/Off/Sleep/Resume, location
55
programming hot keys 60, 61
to perform other key functions
67
to perform pre-defined functions
65
quick-start diagram 26
Screen Rotation
description
27
location
26
Secure Attention Sequence (SAS) 26
L
LAN connector, location 22
LCD backlight
disabling automatic control 41
enabling manual control 80
LEDs 24
Status LED meanings 24
left button click, performing with pen
35 local area network (LAN),
connecting to 43 logging on 27
M
microphone
connecting external
44 connector
location 22
location 19
volume, adjusting 44
monitor
activating
46
connecting
46
sending video display to 27
mouse functions, performing 35
location 20
performing a
double-click 35
performing a right-
click 35 performing
left button click 35
positioning in
holder 36 replacing
74
tether, using 36
Power (On/Off)/Backlight
(On/Off)/Sleep/Resume key,
location 55
power connector, location 22
Power On/Off/ Suspend/Resume key,
location 21
power use, managing 52
project
ion
pan
el
acti
vat
ing
46
connecting 46
sending video display to 27
Q
quick-start guide 26
R
recycling program 106
Reset switch location
19 using 30
resuming operation 33
right-click, performing with pen 35
RJ-45 connector 22
S
screen
landscape mode 27 portrait
mode 27 protecting 73
Index
screen orientation
changing 39 landscape
39 portrait 39
screen protector installing
74 removing 74
replacing 74
serial port
compatible devices 47
location 47
Sleep mode ending 33
starting 32
Sleep mode, description 31
speaker volume, adjusting 45
speakers connecting 45
location 19
storing the computer 73
support, contacting 17
suspending operation 32
T
troubleshooting 77
turning off the computer 30
turning on the computer 29
U
USB port, location 22
USB-compatible device, connecting 43
V
video output
changing from monitor to computer 46
changing to monitor 46
volume
adjusting headphone 45
adjusting microphone 44
adjusting speaker 45
W
Windows Task Manager, launching 27
X
XPL expansion module, connecting 47
XPL2 port 21, 23
Xplore Technologies, contacting 17
XC6 User’s Handbook
111
