Yamaha 6_DTX 5000 QCguide DTX Connection Diagram

User Manual: Yamaha DTX-5000 Connection Diagram

Open the PDF directly: View PDF PDF.
Page Count: 2

2Room Layout
Speaker Placement After assembly of the speakers place them so they appear in the
approximate positions as shown in the diagram above.
Quick-Connect Guide
DTX-5000
Home Theater in a Box


 
1
3
6
5
8
Connect Main Speaker
Wire For illustration purposes,
stand, which is now attached to
speaker, is not shown in diagram
above. Locate screw-type input
terminals at the rear of each of
the speakers. Connect the speaker
wire as shown. The positive (+)
side of the wire with the white
stripe attaches to the red terminal.
The negative (-) side attaches to
the black terminal. (Please see
your NS-FP9500 Owner’s Manual
for more detailed instructions
on speaker wire connections.)
Place assembled main speakers in
desired location to the left and
right of the viewing/audio source.
(See Step 2, Room Layout.)
Attach Bases to Stands Apply the non-skid pads as shown in the
inset. Identify both speaker stands and both bases and attach using
short screws as shown.
Attach Finishing Brackets
on top of two speaker stands.
Inspect Contents After unpacking, inspect the contents to conrm you have the above items: two main
speakers, three rear speakers, one center speaker, speaker wire, two bases, two speaker stands,
two nishing brackets, RCA cable, one bag each of long screws (8) and short screws (4), center speaker
bracket and screw, subwoofer, non-skid pads for base, non-skid pads for stands, cable protection seal for
base, audio/video RCA cable, HTR-5750 Receiver with remote, and DV-S5770 DVD Player with remote, and
optical cable. Also included, but not shown, are AM and FM antennas and three related Owner’s Manuals.
9
Attach Bracket and Speaker Wire Attach bracket to
center speaker using supplied screw as shown. Attach speaker
wire as shown in Step 6.
Main Speaker Assembly
In the
Box
NOTE Banana plug connectors
(not included) can be used to
connect speaker wire to speaker
terminals. Please see your Owner’s
Manual for directions.
Center Speaker Assembly
Yamaha created this package to greatly enhance your audio and home theater enjoyment. This Quick-Connect
Guide will help you get started. Follow the steps to assemble and connect the speakers rst. Refer to your
Owner’s Manuals as well as those that came with your other components for complete instructions and
precautions. Be sure to turn off all power while making connections. You will need the following which are not
included in the package: Phillips screwdriver, wire cutter/stripper, toggle bolts, molly anchor screws or sheet
metal screws.
(8)
(2)
(4)
Thread
Speaker Wires
Cut speaker wire
to appropriate
lengths for
all speaker
connections and
set aside. Place
each long stand
upright on its
base. Thread
main speaker
wire through
oval opening on
stand and pull
through opening
on underside of
base. Pull wire all
the way through
leaving extra
length near oval
opening as shown.
Apply non-skid
padson stands.
4
Speaker
Wire
Attach Main
Speakers Lay stands
down. Line up holes
so that oval opening
is near speaker wire
connections on speaker.
Attach main speakers
using long screws as
shown. Attach cable
protection seal to
base as shown in inset.
Mount Rear Speakers and Rear Center Speaker (Optional)
Fasten mounting screws into a rm wall or wall support as shown. Hang
the keyholes on the back of the each of the speakers on the protruding
screws. Attach speaker wire as shown in Step 6.
For mounting
screws, use
minimum
1
3
/4" tapping
screw (not
included).
Leave 1
/4" space
between screw
head and wall.
16
7
/32"
16
7
/32"
TYPICAL
WARNING If you are unsure of how to securely and safely fasten
speakers to a wall, please contact a reliable source about the best type of
hardware for your particular wall’s construction. Secure installation is the
purchaser’s responsibility. See Owner’s Manual for additional instructions
and precautions.
7Rear
Speakers 1
3
/4"
Use this size screw
Use this size screw
10
Receiver Connections
Connect Speakers Positive (+) side of the wire with
white stripe attaches to (+) terminal. Negative (-) side
attaches to (-) terminal.
CAUTION Receiver must not be plugged in while
connecting speakers.
 
 
FRONT
Right Left
CENTER SURROUND
BACK
SURROUND
Right Left
HTR-5750 Receiver
Connect Antennas to Receiver Locate AM loop
antenna and indoor FM antenna. Keeping receiver
unplugged, connect as shown. For more information
about obtaining clear reception and grounding, see
your Owner’s Manual.
Antenna Connection
Indoor
FM Antenna
AM Loop Antenna
HTR-5750 Receiver
11 12
Subwoofer Connection
YAMAHA ELECTRONICS CORPORATION, USA
6660 Orangethorpe Avenue
Buena Park, CA 90620
http://www.yamaha.com
Phone: 1-800-292-2982
©2004 Yamaha Electronics Corporation
Printed in USA
Part No. 5000QCG rev1
04/04
Connect RCA Cable Connect RCA cable to subwoofer.
Set subwoofer VOLUME control to half-way mark and POWER
to OFF. Connect RCA cable to receiver from subwoofer.
WARNING Components must not be plugged in while
connecting them. Wait until all connections are made before
plugging in your components.
YST-SW030 Subwoofer
13
HTR-5750 Receiver
DV-S5770 DVD Player
DVD Player Connection
DVD Player Optical Connection Remove
dust cap on optical input as shown on insets.
Connect optical cable to receiver. Connect
optical cable to DVD player from receiver.
DVD Player Video Connection
Top: Connect RCA video cable to receiver: Yellow to
“DVD,” as shown, and leave White and Red unplugged.
Bottom: Connect video cable to DVD player from
receiver: Yellow to “Video,” as shown, and leave White
and Red unplugged.
HTR-5750 Receiver
VCR
14
VCR Connection
Connect VCR (optional) Connect audio/video cables (not included)
as shown.
NOTE VCR shown is for illustration purposes only. When using a hi--
stereo VCR, set the Tuner/Line switch on the VCR to “Line” position to
record from another source connected to the HTR-5750 receiver.
AUDIO/VIDEO IN
AUDIO/VIDEO OUT
15 16
DSS/Cable/
HDTV Tuner Box
Video Game Console
Connect DSS/Cable/HDTV Tuner Box (optional) Connect RCA
audio/video cables (not included) and optional optical cable (not pictured)
to “DTV/CBL” terminals on receiver to A/V OUT connections on Box as shown.
DSS/Cable/HDTV
Tuner Connection
HTR-5750 Receiver
HTR-5750 Receiver
Video Game
Console Connection
Connect Game Console or Video
Camera (optional) Connect RCA audio/video
cables (not included) as shown.
Audio/Video
OUT
Audio/Video
OUT
17
Video Monitor
Video Monitor Connection
Connect a Video Monitor Connect an RCA video cable (not
included) to receiver Monitor OUT from your video monitor as shown .
HTR-5750 Receiver
Video IN
18
19
Plug In Plug in the
subwoofer, receiver,
DVD player and other
components. Power
on the receiver rst,
then the subwoofer,
and the others next.
Adjust volume on
the receiver. Please
see each of your
your respective
Owner’s Manuals
for recommended
guidelines and
settings.
20
CD Player Connection
Connect CD Player (optional) Connect RCA audio
cables (not included) to “CD” terminals on receiver as shown.
If your CD Player has digital output terminal, connect digital
cable (not included) to HTR-5750 Receiver Digital Input
terminal. See page 17 of your HTR-5750 Owner’s Manual for
more information.
HTR-5750 Receiver
HTR-5750 Receiver
MD/CD-R Recorder
CD Player
MD/CD-R
Player Connection
Connect MD/CD-R Recorder (optional)
Connect RCA audio cables (not included) to “MD/CD-R”
terminals on receiver as shown.
Audio IN Audio OUT
Enjoy the Yamaha Home Theater Experience
Be sure to put batteries in your remotes (see Owner’s Manuals for instructions).
Refer to your Owner’s Manuals for each component in your system for more information.
Now, relax and enjoy the unparalleled sound of your Yamaha Home Theater system.
HTR-5750 Receiver

Navigation menu