YiHu Technology M99 Smart Band User Manual

Shenzhen YiHu Technology Co.,Ltd. Smart Band

User Manual

Smart Band
M99
Thank you for choosing this product. Please read this manual carefully before using it.
The hardware platform of the mobile phone system needs to meet the conditions:
Version IOS 8.0 and above
Version Android 4.4 and above
Users’ express manual
1. Download I BAND
Only the application supports can the bracelet be connected to the phone. Before downloading the
APP, please check the requirements of the hardware platform of the mobile phone system.
Search method 1: Scan the QR code to download
The download link in the page may not be able to be open by using WeChat and other scanning
tools. Please copy it to the browser and then open!
Search method 2: Search to download
Search for "I BAND" in the APP Store or Android App Store and download directly from your
phone:
Android App Store recommends: Google Play Store and 360 mobile assistant/ Wandoujia
/Yingyongbao /baidu assistant, etc
1. Activation and charging of the product
Please make sure the power is normal while using for the first time (the charging method is shown
in the diagram below, and the DC interface can be charged directly by USB directly, and
5v-100ma is required. Please do not use the quick charger for charging).
3) Long press to start up
Enter the main standby interface. The four-set main interface UI is set in the bracelet, and in the
main standby interface, long press the touch button for 2S and the next standby interface will be
automatically switched.
a. Pedometer during exercise
Accurately calculate the number of daily exercise steps, walking time, exercise mileage and
calorie consumption.
b. Sleep monitoring
Accurately monitor the quality of sleep every day and calculate the time of deep sleep and light
sleep.
c. Health measurement
Accurately monitor the current health information, including heart rate, blood pressure and blood
oxygen (the data are for reference only, not for medical use)
Enter the heart rate test interface. Long press the touch key for 2S to enter the monitoring mode.
d. Alarm / message reminder
Alarm clock, phone, QQ, WeChat, SMS, sedentariness reminder and anti-lost reminder
e. Remote control camera
Support the mobile phone to take photos remotely
f. Hang up the phone
Long pressing of the touch button of the bracelet can hang up the phone.
3) Instruction of the starting and closing the bracelet.
a. Long press the touch button to start up.
b. If the long press fails to start up, please confirm whether the battery is electrified
c. If the battery is dead, please use USB for charging.
d. Device binding
Method 1: In the pedometer interface, long pressing the touch key will produce a QR code (when
the bracelet and the phone is connected, then the QR code will not be open by long pressing of the
button). Open the QR code and scan it in the APP for binding.
Method 2:
Inside the APP, enter the binding device interface and follow the icon to bind the bracelet.
Introduction and operation instructions of the bracelet function interface
The main interface. After the APP is synchronized, the current time and date will be displayed on
it.
Pedometer interface. Record the current exercise data. Enter the QR code interface by the long
press of the touch button. Press touch button quickly to enter the next functional interface.
Movement mode. Enter the movement mode to choose the interface by the long
press of the touch button. There are 2 modes to choose from. The first is riding mode and the
second is running mode. Enter the movement mode by the long press of the touch button. After
selecting the riding mode, long press the touch key for 2S and then enter the state of riding mode.
If you need to exit, long press the touch key 2S to exit the current mode. Short press the touch
button can switch. If you need to return to the previous menu, long press the touch button in the
"back" interface
Heart rate interface. Long press the touch key for 2S and then enter the test interface of heart rate,
blood pressure and blood oxygen.
The data are the value of heart rate, blood pressure and blood oxygen.
The dynamic heart rate will be measured automatically for half an hour and the data will be
synchronized to the APP in real time. Manual test heart rate will not be synchronized to the APP.
Sleep monitoring interface. Record the sleep of the day before. Sleep monitoring is from 9pm to
9am. After 9:00 am, the data will be updated to APP, and the APP will record the current data and
keep it
This alarm clock screen shows the reminder time.
Find the cell phone. After binding the bracelet, long press this button and the phone will ring.
Version information of the machine. Long press this interface, and then the version number of this
machine will be introduced.
Press the touch button for 3 seconds and the bracelet will be turned off
Introduction to APP Settings
a. Enter the interface of the bracelet APP and the function menu button can be seen in the upper
left corner.
(1. Enter the function menu interface, 2. View historical data)
b. After entering the Settings interface, you can enter the corresponding function setting interface.
On this function interface, there are remote control camera, bracelet finding, reminder function,
flip bright screen, unit settings, time format, target settings and the interface software on the
bracelet.
Among them, you can set up phone alerts, SMS reminders, SMS, sedentariness reminderalarm
alerts, anti-lost reminder and social software reminders after entering the reminder function.
7) Notes for the use of the bracelet
a. The bracelet supports IOS7.1 system or above and Android 4.4 system, a phone or tablet device
with Bluetooth 4.0, not all mobile device models. Please refer to the actual conditions.
b. The inside of this product is precision parts. Please do not drop the product and impact with the
hard object, otherwise the machine surface or hardware will be damaged.
c. Please don't separate the machine without permission.
d. Do not throw the product into the fire as it may cause an explosion.
e. Please note that if you are sensitive skin, you may feel uncomfortable while wearing it.
f. When the USB of the bracelet is touched with water, please wipe it dry before charging.
Otherwise, it will cause malfunction and corrosion to the charging contact.
g. In a strong electrostatic environment, the bracelet may fail. For example, there will be no
display or display abnormally. Do not use it in the environment of high voltage to avoid static
electricity interference.
h. Only when the lens and case remain intact can it be waterproof. Violent disassembly or
installation may result in waterproofing failure.
i. This product is waterproof, but only for cold water. Hot water will lead to water mist in the lens.
(Do not wear it while taking a hot shower or swimming to avoid damage.)
Frequently Asked Questions FAQ
Can't find the bracelet when pairing?
Please confirm that the Bluetooth of your mobile phone has been switched on and the phone is in
the "support range".
When pairing, make sure the distance between the bracelet and the phone is within 0.5m. After
pairing, the distance of the range of the Bluetooth communication is within 10m.
Please check whether the bracelet has power. Please contact us if it is still unresolved after the
charging.
Occasionally a Bluetooth connection does not work?
Occasionally, an exception occurs when some phones’ Bluetooth service is restarted, which will
result in such situation; usually, after re-opening the phone or restarting the phone, you can
establish a normal connection.
Statement of toxic and hazardous substances in electronic information products
This product complies with the standards of EU ROHS, referring to the instructions IEC 62321
and the EU ROHS, instructions of 2011/65 / EU and its revised directives.
Basic parameters
Battery capacity90mAh
The weight of a single machine: 40g
Bluetooth versionBLE4.0
Waterproof grade: life waterproof
Duration of standby: 7-10 days
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used i
n portable exposure condition without restriction.

Navigation menu