Yun Tong Electronic UWT-201X UWSB-System 2.1x-W User Manual WASP UMLF2 1 2012 Rev1
Yun Tong Electronic (ShenZhen) Co.,Ltd UWSB-System 2.1x-W WASP UMLF2 1 2012 Rev1
UWT-201X_User Manual_REV1
Wireless Audio Solution Products LINK-Family™ 2.1 System UWT-201x AUX UDC-101x UNIVERSAL DC PLATE WITH SUBWOOFER Universal DC Plate with Sub Out - UDC-101x Designed in USA Manufactured in China DC INPUT 24 V Printing is Pantone Mettalic 877C THe word WASP is in tool, others are printed LINK-Mount™ Copyright WASP® 2012, All rights reserved Designed in USA Manufactured in China ++ 2.5 A SUB OUT Universal DC Plate with Sub Out - UDC-101x PAIRI DC INPUT 24 V IRIAP SUB OUT Date: 5/27/12 STATUS PAIRING Revision: 3 STATUS PAIRING STATUS PAIRING UDC-101x UNIVERSAL DC PLATE WITH SUBWOOFER Date: 5/27/12 Revision: 3 2.5 A Printing is Pantone Mettalic 877C THe word WASP is in tool, others are printed LINK-Plate™ Universal DC Plate with Sub Out - UDC-101x Designed in USA Manufactured in China LINK-InWall™ Universal DC Plate with Sub Out - UDC-101x Designed in USA Manufactured in China DC Input Label is 45 mm W x 26 mm H with 2 mm radius DC Input Label is 45 mm W x 26 mm H with 2 mm radius Printing on Label is in Pantone Metallic 877C Label color is Pantone 419C Printing on Label is in Pantone Metallic 877C Label color is Pantone 419C UMLF2.1-2012 Rev1 Wireless Audio Solution Products Thank You for choosing WASP® - Wireless Audio Solution Products™ Your professional integrator has been chosen for their knowledge in providing custom audio and video solutions and providing only the best in class product’s from leading manufacturers. WASP® select’s only the best professional custom integrators to offer our products. Our authorized custom integrators have been trained and have complete knowledge of all WASP® products usage and installation. In order to provide you with the proper service before, during, and after the installation WASP® has employed a strict “NO INTERNET SALES POLICY”. WASP® does not endorse the sale or promotion of its products via the internet nor does it tolerate these actions from third parties. Any WASP® product that is sold via any type of e-commerce transaction automatically voids the manufacturer's warranty. WASP® products are engineered to be the Best-In-Class and provide the custom integrator with patent pending high performance wireless audio solutions not available anywhere else. All WASP® products are proudly engineered in the U.S.A and manufactured to give unparalleled performance and reliability by choosing only the best in materials and workmanship. We are so confident with our product’s we are proud to provide you with an outstanding warranty as stated on the attached certificate should you ever need service. In order to provide you with any updates regarding your product or new products as they become available please register it at www.waspaudio.com/product/warranty.registration Rather than spend money on public advertising campaigns, WASP® re-invests into research and development to continue to provide the custom integrator and you with the most innovative wireless audio solution products. Therefore we ask that if you are happy with the performance of your purchase please tell a friend, if not please tell us. Sincerely, The WASP® Team Copyright WASP® 2012, All rights reserved UMLF2.1-2012 Rev1 Wireless Audio Solution Products READ FIRST! CAUTION: Risk of Electrical Shock - Use in Dry Locations Only CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts – refer servicing to qualified service personnel only. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. Keep these instructions. Heed all Warnings. Follow all instructions. 2. Do not use this apparatus near water. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus. 3. Clean only with a dry cloth. 4. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 5. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 6. Only use attachments/accessories specified by the manufacturer. 7. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 8. Do not exceed manufacturers weight capacity of speaker bracket 9. NOT FOR USE WHERE EXPOSED TO THE WEATHER Copyright WASP® 2012, All rights reserved UMLF2.1-2012 Rev1 Wireless Audio Solution Products INSTALLING LINK-Family™ 2.1 System Refer to LINK-Family™ Authorized Dealer Installation Manual WASP® Products are SOLD and Installed Only by Authorized Dealers! For list of Authorized Dealers please go to www.waspaudio.com/authorized.dealers Or contact us at: WASP Audio Technologies Corporation P.O. Box 746 Webster, MA 01570 508-986-9277 (WASP) Copyright WASP® 2012, All rights reserved UMLF2.1-2012 Rev1 Wireless Audio Solution Products Possible causes of interference with your LINK-Mount™ System A) Metal studs, in fact any metal wall material, can cause the signal to be diminished or lost. This may also be a problem if your wall paper happens to be a foil type or have metal fibers in it. B) Microwave ovens, when operating, may degrade or interrupt the signal from your transmitter. Usually this will only be a problem for those speakers in close proximity to the microwave. For best results, do not locate the transmitter near your microwave. C) Certain portable phones operating in the 2.4 or 5.8 GHz range, wireless computer routers, and other consumer electronics and toys using 2.4 or 5.8 GHz may cause interference when operated too close to either the transmitter or the LINK-Mount™ . THIS DEVICE COMPLIES WITH FCC RULES PART 15. Operation is subject to the following four conditions: (1) ! This device may not cause harmful interference and (2) ! This device must accept any interference received including that may cause undesired operation and (3)! This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.” (4) This device within 5.15-5.25GHz band is restricted to indoor operations. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Copyright WASP® 2012, All rights reserved UMLF2.1-2012 Rev1 Wireless Audio Solution Products General guidelines for your LINK-Family™ System: Issue Possible Fault No Sound from Speaker If LED is flashing, LINK is interrupted. Fix RE-Link by pressing and releasing “Link” button on back of transmitter and then press and release “Link” button on LINKMount™ bracket LED is OFF on LINK-Mount™ Check WASP® power supply to ensure or WASP® transmitter. it is plugged into outlet or surge suppressor. Check outlet for power by plugging in a lamp. If no power contact electrician. If power supply has been plugged into “switched” outlet move to non-switched outlet. If power is present but still no sound source may not be on: Contact WASP® Authorized Dealer. If used as surround sound Confirm home theater receiver is in speakers there may not be desired listening mode for surround any sound during certain sound. scenes of movie. You may be be listening to movie or show in with limited surround sound LED is OFF on any WASP® device No signal from source receiver. Turn source on and turn volume up slowly until blue light comes on transmitter. Check WASP® power supply to ensure it is plugged into outlet or surge suppressor. Check outlet for power by plugging in a lamp. If no power contact electrician. If power supply has been plugged into “switched” outlet move to non-switched outlet. If power is present but still no sound contact WASP® Authorized Dealer. LED lights are flashing Interference with wireless link Copyright WASP® 2012, All rights reserved Contact WASP® Authorized Dealer. UMLF2.1-2012 Rev1 Wireless Audio Solution Products Specifications*: Transmitter: Wireless Frequency 2.4GHz, 5.2 GHz, 5.8 GHz Power Supply 7V-DC (refer to power supply label) FCC ID# P44UWT-201X LINK-Receiver™: UWSB, UWIW, UWSP Wireless Frequency 2.4GHz, 5.2 GHz, 5.8 GHz Power Supply 24V-DC (refer to power supply label) FCC ID# P44UWSB-P-50X-1 Power 50W, 20Hz-35kHz, +0-3dB, THD .02% 1W *Specifications subject to change without notice. Copyright WASP® 2012, All rights reserved UMLF2.1-2012 Rev1 Wireless Audio Solution Products For any other questions regarding your WASP®- Wireless Audio Solution Product please contact your Authorized Dealer: Dealer Name:____________________________________ Dealer Contact:__________________________________ Phone:__________________________________________ Email:__________________________________________ Date Professionally Installed: ____/____/_____________ Model Number:__________________________________ Serial Number:___________________________________ or contact WASP® at WASP Audio Technologies Corporation P.O. Box 746 Webster, MA 01570 508-986-9277 (WASP) www.waspaudio.com Copyright WASP® 2012, All rights reserved UMLF2.1-2012 Rev1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf Linearized : No Page Count : 8 PDF Version : 1.4 Title : WASP UMLF2.1-2012 Rev1 User Manual Author : OFFICE1 Producer : Mac OS X 10.7.5 Quartz PDFContext Creator : Pages Create Date : 2012:11:29 12:01:54Z Modify Date : 2012:11:29 12:01:54ZEXIF Metadata provided by EXIF.tools