Zhejiang Fousine Science and Technology 190714-00 7W RGB Bulb User Manual LIT PAMPHLET MonsterIllumination v18cli lores
Zhejiang Fousine Science &Technology; Co.Ltd. 7W RGB Bulb LIT PAMPHLET MonsterIllumination v18cli lores
Contents
- 1. User Manual
- 2. Packaging
User Manual
3-LED STRIP KIT EXTRA LONG LED STRIP KIT 2 LED LIGHT BULB KITLARGE SPACE KIT
2 LED STRIPS & 2 LIGHT BULBS 1 LED STRIP & 1 LED LIGHT BULB
Perfect for big spaces like living rooms,
media rooms, large bedrooms, or
kitchens.
bathrooms, or anywhere you want to bring
your world to life with color.
Everything you need to add drama to a
medium to large space. Use LED strips below
kitchen counters, underneath a bar, or behind
your TV or desk monitor.
Use this extra-long LED strip above or below
cabinets, under a bar, under a bed, or in a
This kit contains two LED light bulbs and is
ideal for small to medium spaces like
STRIP EXTENSION CABLE
LED Strips above a cabinet, in the ceiling, or
extension power cable and adapter.
SMALL SPACE KIT
LET’S
GET
STARTED
GET HELP
FOR TECHNICAL SUPPORT GO TO:
www.monsterstore.com/pages/contact-us
OR CALL: 1 (877) 800-8989
www.youtube.com/monsterilluminessence
For Instructional Videos:
USING YOUR REMOTE
POWER OFF
POWER ON
(PRESS FOR WHITE LIGHT)
COLOR RING
• SELECT THE COLOR
OF YOUR MOOD
BRIGHTNESS
• MAKES LIGHTS BRIGHTER
OR DIMMER
SPEED
• MAKE LIGHTS CHANGE
COLORS FASTER OR SLOWER
PRESET LIGHT PROGRAMS
• CHOOSE FROM EIGHT PRESET
AUTO PROGRAM MODES
AAA BATTERIES REQUIRED (NOT INCLUDED)
GET INSPIRED
Subscribe to our Pinterest boards to learn all the cool things
you can do with Monster IlluminEssence.
www.pinterest.com/monsterilluminessence
For Ideas and Inspiration:
Federal Communication Commission
Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
The Responsible (located within the United States) party information:
Company Name: Monster, Inc.
Address: 601 Gateway Blvd. Floor 9 Suite 900,
South San Francisco, CA 94080, USA.
Telephone Number: 415-840-2000
Email: ProductCompliance@monstercable.com
The name and model number of the product:
05064 4 7689 0 305 0 6 4 4 7 6 8 9 1 005 0 6 4 4 7 6 8 9 2 705 0 6 4 4 7 6 8 9 3 4 0 5 0 6 4 4 7 6 8 9 4 1 0 5 0 6 4 4 7 6 8 9 5 8
IMPORTANT SAFETY
INSTRUCTIONS
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS
Lighted lamp is HOT!
WARNING
– To reduce the risk of
FIRE OR INJURY
CAUTION
– Use indoors only.
CAUTION – Risk of Electric Shock
CAUTION
– Hot surface. Keep away
from curtains and other
combustible materials.
T ower and allow to cool before
replacing lamp.
Do not touch hot lens, guard,
or enclosure
Keep lamp away from materials that
may burn.
Do not touch the lamp at any time.
damage lamp.
Do not operate the luminaire with
a missing or damaged shield.
INSTALL LED LIGHT BULBS
COLOR RING
Choose the color of your lights.
BRIGHTNESS
Dim from 10% - 100%.
PRESET LIGHT PROGRAMS
Eight di erent auto programs for parties,
lounging, and special occasions.
CLUB 1
CLUB 2
LOUNGE
BEACH
SUNSET
CHRISTMAS
INDEPENDENCE
HALLOWEEN
SPEED
Adjust program speeds faster for parties and
slower for an elegant change of atmosphere.
EXPAND
EXPAND LIGHTS AND ROOMS
You can pair up to four remotes with up to
30 Monster IlluminEssence LED strips or LED
light bulbs.
You can have multiple remotes control the
same set of lights.
You can also have di erent sets of lights paired
to di erent remotes to control rooms
independently.
INSTALL LED STRIPS
Peel 3M™ adhesive mounting and press the flexible
LED strip into place.
Plug the LED strip into the 5V USB controller
cable(4ft)
and then the cable into any USB port
(TV or PC) or USB power supply (not included).
Plug the LED strip into the 12V controller (
0.6ft)
and then the controller into the included
12V power supply (cable lenght
4ft)
.
the included 12V power supply. 6.5-foot LED strips should
only be plugged into 5V USB ports.
USE ONLY WITH CLASS 2 POWER UNIT
INPUT
TUPTUO
G
R
B
G
R
B
INPUT
TUPTUO
G
R
B
G
R
B
Model Number
190712-00
190713-00
190714-00
190715-00
Model Name
6.56FT 5V RGB Strip & 5V RF Strip Controller
7W RGB Bulb
RF 2.4GHz Remote
SAW30-120-2000U Power Supply
rm 880185
Do not use if there is any damage to
the light or cord insulation.
Inspect periodically.
THIS DEVICE IS NOT INTENDED FOR USE
WITH EMERGENCY EXITS.
SAVE THESE
INSTRUCTIONS
PAIRING
Speed+
Speed-
By default, all Monster IlluminEssence LED
strips and LEDlight bulbs will be paired out
of the box with the included remote control.
TO PAIR
To pair LED strips or LED light bulbs to another
remote, simply unplug and replug back in the
LED strip or lamp to power and WITHIN FIVE
SECONDS of plugging back into power, press
and hold the “Speed+” until the lights blink
three times.
TO UNPAIR
Repeat above but instead of “Speed+”
press “Speed-”.
914.4 mm
178 mm
914.4 mm
178 mm
Do not mix old and new batteries and Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries
Battery Warning Statement
Do not mix old and new batteries and Do not mix alkaline, standard (carbon-zinc) or
rechargeable (ni-cad, ni-mh, etc.) batteries