Zhejiang Fousine Science and Technology BWA17AV004 BW BLUETOOTH RECEIVER User Manual
Zhejiang Fousine Science &Technology; Co.Ltd. BW BLUETOOTH RECEIVER
Contents
- 1. User manual
- 2. User Manual
User manual
Bluetooth Receiver
User Manual
Please read this manual carefully before use.
Product Description
This bluetooth receiver is especially designed for car
stereos/speakers/headphones and most mobile devices with 3.5mm aux in port,
make ordinary speakers instantly become wireless bluetooth stereo speakers,
wirelessly stream music and calls from you smart-phone to your car or home
stereo.
Product Diagram
1.Power Switch
2.3.5mm Audio Jack
3.Multi-function
Button 4.Microphone
5.Previous Button
6.Next Button
7.Bluetooth Indicator Light
8.Charge USB Port(5V/1A)
Packing list
1.Bluetooth receiver 1 pcs
2.3.5mm audio line 1pcs
3. Lotus audio line
4.Charge cable 1pcs
5.User manual 1 pcs
Specifications
Bluetooth specification: V4.0+EDR
Bluetooth Operating distance: 30 feet
Running time: about 13H
USB input: 5V/1A
Operating Guide
Step1:Slide switch power on the bluetooth receiver and the indicator flashes
means it’s ready to pair.
Step2: Connect bluetooth receiver with your speaker via 3.5mm audio cable.
Step3:Enable bluetooth on your smart-phone in the settings, search “BT-1”and
tap on it to start pairing, when successfully paired, the bluetooth indicator will
illuminate blue.
Play music
1.After your smart-phone is paired with the bluetooth receiver, play your music
on your smart-phone.
2.You can adjust the volume on your smart-phone.
3.Press the Multi-function Button to pause or resume the audio.
4.Press the Previous Button or the Next Button to select your favorite music.
Make/Answer a call
1.When you make a phone call or answer an incoming one,the bluetooth receiver
will automatically pause the audio.
2.Press the Multi-function Button to answer incoming calls,press this button
once again to end the call,your audio will be automatically resume.
Redial the last call
Double press the Multi-function Button.
Reject a call
Press the Previous Button or the Next Button.
Enable Siri
For a better IOS user experience,add the Siri function to this bluetooth
receiver,activate the voice software by long press the Multi-function button.
Remark
1.It will connect to the last paired device automatically when turned on next
time.(Turn on the bluetooth of your smart device first)
2.This bluetooth receiver can connect two bluetooth devices at the same
time(step1:paired with the first smart-phone then turn off the smart-phone’s
bluetooth step2:paired with the second smart-phone then enable bluetooth on
your first smart-phone tap on it to restart pairing.
3.For the best audio quality,please turn the volume of your smart device into the
max level.
4.If the bluetooth receiver low battery, the red indicator will be flash, please to
charge the BT-1 (5V/1A input),when charging finishes, the red indicator light
will turn off.
Troubleshooting
Once the pairing process is completed, the connection can break for the
following reasons:
a. The distance between the devices is greater than 30’(10m) or there
are obstacles(e.g.: walls, furniture, etc) between them.
b. One or both of the devices has been turned off or must be charged.
c. Connection has not been made within a specific time and the device is in
sleep mode or powered off. Turn on/off both devices to re-connect or transmit
audio. Please try the following:
1. Restart (on/off) the bluetooth receiver.
2. Restart and repeat pairing process for both devices.
3. Recharge both devices.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.