Zippy Technology RF610 2.4G Keyboard User Manual A4E2A5552E706466

Download:
Mirror Download [FCC.gov]
Document ID	632263
Application ID	NFGTbjfwEt3sYjYYs6quVg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.11kB (251376 bits)
Date Submitted	2006-02-28 00:00:00
Date Available	2006-02-27 00:00:00
Creation Date	2006-02-24 09:17:14
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2006-02-24 17:18:14
Document Title
Document Creator	PScript5.dll Version 5.2
Document Author:	lillian_lee

"2.4GHz All Around Freedom, Infinite
Possibilities"
Alpha Transport Mini, RF-610
User's Manual
Warning
Please do not use this product in ashy, wet, or oily
environments. Failure to do so may shorten the life
of this product and may cause bodily harm.
Please keep this product as far away from Radio
Frequency interruption areas as possible. This is
not an outdoor product. Exposing this product to
the elements may cause damages to the product
and bodily harm to its users.
Please do not use petroleum, benzene or thinnerbased solution to clean this product.
Mouse
B. Setting up the Keyboard and Mouse
Dimensions: 98 x 56 x 35.8 mm
Weight: 95 +/- 25g (with Battery)
Key Number: 3 Keys
(Wheel button on middle button)
Battery: 2 x AAA batteries
(Rechargeable, do not charge non-rechargeable
dry-cell or alkaline batteries)
Battery Life: 1 Month (Base on average usage)
Channel: 16 Channels 2403,2407,2411,2415,2419,2423,2427,2431
2435,2439,2443,2447,2451,2455,2459,2463,
ID: 65535 sets
Radio Frequency: 2.4 GHz
Dongle Receiver
System requirements
Dimensions: L70xW22.7xH12.3mm
Weight : 10.9g
Interface: USB 1.1
IBM or compatible PC
Windows and Macintosh Operating System
Pentium-equivalent processor or above
At least 10MB hard disk space
One available USB port
1.Open the keyboard's battery compartment cover and
insert the two pieces of AAA Alkaline batteries.Make
sure they are properly installed. (FIG. 1)
2.Replace the keyboard battery compartment cover.
3.Open the mouse's battery compartment cover and
insert the two pieces of AAA Rechargeable batteries.
Make sure they are properly installed. (FIG. 2)
4.Replace the mouse battery compartment cover.
5.Press the button on the dongle receiver to reset the ID.
6.Flip the keyboard around and gently press the ID key;
a pointy object such as a pin may be used.
7.Flip the mouse around and gently press the ID key;
a pointy object such as a pin may be used.
8.The LED indicator onthe dongle receiver willgo off
when the ID's have been properly set and the keyboard
and mouse are working.
Attention
OS support
The mouse's optical sensor may not work on bumpy,
reflective and/or translucent materials; such as glass,
polished table top and/or cloth. We recommend using a
mouse pad for improved accuracy.
Windows XP/Windows 2000/NT
Windows ME
MAC OS
Introduction
Warranty Information
Installation Procedure
Battery Low
Thank you for your patronage of purchasing our
cordless keyboard and optical mouse. For your own
safety, please read this manual thoroughly before
using this product. After you have read this manual,
please keep it in place for reference when necessary.
This product is backed by a One-Year Manufacturer's
W a r r a n t y, s t a r t i n g f r o m t h e d a t e o f p u r c h a s e . T h e
warranty covers for free repair in accordance with the
contents stated herein but does not cover wear and tear
and any malfunction or damages as results of improper
usage as stated in this manual.
Before installing this product please make sure you have
one available USB port reserved for the dongle receiver.
If your computer did not have an available USB port, you
may purchase one of Zippy's 10-Key keypad with USB
Expansion ports or equivalent USB hub.
1.Low-Battery is indicated by the illumination of the mouse
scroll-wheel. Please recharge the mouse when the LED
lights up to illuminate the scroll-wheel.
Only connect the mouse to the charger when rechargeable
batteries are being used. Charging non-rechargeable
dry-cell or alkaline batteries maycause the batteries
to explode.
2.If you choose not to charge the mouse, please swapout
the rechargeable batteries with fresh batteries for
continuous usage.
3.While the mouse isin sleep mode, please press any
button or move the scroll wheel to wake it up.
4. We recommend using alkaline batteries for the keyboard.
5.You may need to reset the ID's after replacing new
batteries for the keyboard and mouse.
Contents in the package
The following items are included in the package.
Please make sure all items are accounted for as you
open the package. If there was any i tem missing or
damaged, please contact the reseller where the
product was purchased or our support center.
Wireless Keyboard x 1
Wireless Optical Mouse x 1
USB 2.4GHz dongle receiver x 1
Manual/warranty x 1
Optical Mouse Charger x 1 / (110V, 220V, optional)
Rechargeable batteries x 2 (AAA, for mouse)
Alkaline batteries x 2 (AAA, for keyboard)
A. Setting up the Dongle Receiver
1. Plug the dongle receiver (FIG. 3) into an available USB
port.
Specifications
Keyboard
Dimensions: 290 x 135 x 27 mm
Weight: 500 +/- 25g (with Battery)
Key Number: 88 Keys(By Ianguage)
Battery: 2 x AAA batteries
Battery Life: 3 Month (Base on average usage)
Channel: 16 Channels
ID: 65535 sets
Radio Frequency: 2.4 GHz
Hot Keys :Search, E-mail, Home
2. Wait for Windows toinstall drivers forthe dongle
receiver, keyboard and mouse.
3. When the dongle receiver has been properly initialized,
its LED light will stay alit.
Warning
Please be careful when resetting the ID's for the keyboard,
mouse and dongle receiver. Objects with sharp point may
break and leave behind shards.
Please do not attempt to charge non-rechargeable
batteries using the mouse and adapter. Doing so may
cause the non-rechargeable batteries to explode.
Warning
As shielded-type power cord is required in order to meet
FCC omission limits and also to prevent interference to
the nearby radio and television reception. It is essential
that only the supplied power cord be used.
Charge port
To remove batteries, please repeat steps 4 to 3 or 2 to 1
in reverse order.
ID button
Function discription
Use only shielded cables to connect I/O devices to this
equipment.
Battery housing
This warranty is intended to provide free repair under
t h e t e r n s a n d p e r i o d s t a t e d h e r e i n . A c c o r d i n g l y, t h i s
warranty shall not limit the legal rights entitled to the
customer. For more information concerning the repair
after expiration of the guarantee period, please contact
us or our retailer where you purchased this product.
Names of other products mentioned in this Manual are
the trademarks or registered trademarks of their
respective owners.
You are cautioned that changes or modifications not
expressly approved by the party responsible for
compliance could void your authority to operate the
equipment.
FIG.2
ID button
All brand names, trademarks and logos are the properties
of their respective owners.
FIG.3
ID button
Battery housing
FIG.1
12
Hotkey Functions
Troubleshooting
There are five built-in hotkeys for the RF-610 for quick
access under the Windows operating system. Please
refer to the following section on their functions.
Please visit our On-Line FAQ section for help.
Search:
Open the Internet Search pane.
E-mail:
Start the default e-mail program.
Home:
Start the default Web browser or
go to the Home Web page.
Batt. Low
Low Battery Notice.
FCC Statement on CLASS B
This equipment has been testedand found to comply
with the limits foe a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
p r o v i d e r e a s o n a b l e p r o t e c t i o n a g ai n s t h a r m f u l
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmfulinterference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
Mandatory repair charges are required for
the following conditions, even within the
guarantee period:
(1) Malfunction or damage is due to misuse or improper
alteration or repair.
(2) Malfunction or damage is caused by the movement
or fall during installation after the purchase.
(3) Malfunction or damage is caused by a fire, salt, gas,
earthquake, lightning, wind, water or other natural
calamities, or abnormal voltage.
(4) The manual is not presented.
(5) Date of purchase, customer's name, name of the
shop are not filled in or are altered.
(6) Malfunction or damage is caused by other devices
connected to the RF-610.
To get the repair service, please disconnect RF-610
from other devices connected.
- Reorient or relocate the receiving antenna.
- Increase the separation between theequipment and
receiver.
- C o n n e c t t h e e q u i p m e n t i n t oa n d o u t l e t o n a c i r c u i t
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV
technician for help.
10
11
14
++Boz!dibohft!ps!npejgjdbujpot!)jodmvejoh!uif!boufoobt*!nbef!up!uijt!efwjdf!uibu!bsf!opu!!
fyqsfttmz!bqqspwfe!cz!uif!nbovgbduvsfs!nbz!wpje!uif!vtfsȡt!bvuipsjuz!up!pqfsbuf!uif!!
frvjqnfou/
C700764009
13

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2006:02:24 09:17:14Z
Modify Date                     : 2006:02:24 17:18:14+08:00
Page Count                      : 2
Creation Date                   : 2006:02:24 09:17:14Z
Mod Date                        : 2006:02:24 17:18:14+08:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : lillian_lee
Metadata Date                   : 2006:02:24 17:18:14+08:00
Creator                         : lillian_lee
Title                           : 

EXIF Metadata provided by EXIF.tools