Eagle Ega510 User Manual 19ac97d8 3d7d 4aaa 9a92 198be26190cb
User Manual: eagle ega510 Eagle Electronics Saw EGA510 User Guide |
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
EAGLE Air Tools 3” CUT OFF TOOL MODEL EGA510 OWNERS MANUAL www.eaglecompressor.com 1-800-551-2406 READ THE ENTIRE MANUAL BEFORE PUTTING THIS TOOL IN SERVICE Limited Air Tool Warranty Eagle warrants air tools of its own manufacture against defects in workmanship and materials under normal use and service for twelve(12) months from date of purchase by original purchaser. Parts are covered by this warranty for ninety(90) days from date of purchase. The following expandable items are warranted against defects in workmanship and materials for ninety(90) days from date of purchase: sockets, screw driver bits and accessories, sanding and back-up pads, impact mechanism, chisels and their retainers, cutting and grinding accessories and any other expandable items not specifically mentioned. Normal wear and tear, service or maintenance items such as O-rings, springs, gaskets, packing or seals, fluid needles and nozzles, motor vanes or blades, collets, chucks or any such item not specifically mentioned are covered for ninety(90) days from date of purchase warranty only. Eagle will, at its sole discretion, repair or replace the tool or parts that have failed within the warranty period. If repairs are considered, they will be scheduled in the normal course of the workflow at its service centre. Not covered under this warranty: • Indirect or consequential loss or damage or expenses resulting from the failure or malfunction of this tool. • Accidents or failures resulting from owners neglect, abuse or failure to operate and maintain the tool in accordance with the instructions provided in the owner’s manual. • Tampering, removal or alterations of safety devices will void this warranty. • Blemishes or cosmetic defects which do not effect the tool’s operation. • Tools used industrially, commercially or in rental applications. To claim warranty the owner/purchasers must provide proof of purchase and maintenance records, and when requested ship or deliver at owner/purchasers expense and cost to Eagle’s factory or service centre Wear hearing protection. Wear eye protection. Wear respiratory protection. Read the instruction manual TABLE OF CONTENTS Limited Warranty................................................................................................ 2 Description......................................................................................................... 3 Inspection........................................................................................................... 3 Safety Instructions.............................................................................................. 3 Before Using This Air Tool.................................................................................. 5 Operating Instructions........................................................................................ 5 Troubleshooting.................................................................................................. 5 Parts Breakdown................................................................................................ 6 Tool Specifications.............................................................................................. 7 DESCRIPTION Eagle Air tools are manufactured in accordance with our strict specifications and designed to be used in light duty professional or serious DIY applications. When used in accordance with warnings and instructions given in this manual, and when properly applied and maintained they should give you many years of productive and trouble free service. This tool is NOT designed for professional, production or industrial use, when used in these applications its life expectancy will be significantly shortened and the warranty will be void. INSPECTION Upon receipt of your new tool, carefully check for any shipping damage. If your new tool is damaged in shipping you need to file a claim with the carrier at once, and before contacting Eagle’s customer service department. Also carefully check to make sure all accessories (if included) are with the tool. Make sure any loose bolts, fittings etc. are tightened before you put this tool into service. SAFETY INSTRUCTIONS You should operate this air tool only if you have read this entire manual, and understand its content, and you are familiar with safety and proper use when operating this equipment. This air tool is part of a high pressure compressed air system, the following safety precautions must be followed at all times. Wear hearing protection. Wear eye protection. Wear respiratory protection. Read the instruction manual SAFETY INSTRUCTIONS 1) Always wear protective goggles or safety glasses, hearing protection, protective gloves and footwear. 2) Air tools can create dust when drilling, grinding, sanding or cutting. This dust can contain substances known to cause cancer, birth defect, etc. Also wear proper breathing protection. 3) Do not wear loose clothing or jewelry, and ensure long hair is protected with a proper cover. 4) Do not exceed the maximum operating pressure of this tool or any component in the air delivery system. 5) Do not depress the trigger when connecting this tool to the air supply system. Always disconnect the tool from the air supply system when changing attachments. 6) Only use attachments specifically designed for use with air tools. Hand tool sockets can shatter and cause serious injury. Do not use worn or damaged attachments. Make sure attachments are securely attached to the air tool. 7) Do not point the air tool at yourself or any other person. 8) Never use Oxygen or combustible gases to operate this tool. Use only lubricated compressed air regulated to the recommended operating pressure for this tool. 9) Disconnect this tool from its air supply before attempting to install or change attachments or before attempting any service. Also disconnect the air tool from the compressed air system when not in use. 10) Excessive use of this tool can cause injury due to vibration and fatigue. Do not use this tool in awkward positions, and avoid repetitive work motions. When feeling discomfort, numbness, fatigue, tingling or pain stop work immediately and seek medical treatment and advice. 11) Inspect air hoses, and discard if in worn, weak or damaged condition. Make sure all air connections are tight and secure. 12) Keep hands away from moving parts 13) Consider working conditions and environment. Do not operate this tool around hazardous gases or flammable gases. Keep your work area neat and tidy and make sure the work area is well lit. 14) Always use clamping devices to hold all work securely in place, never use hands or other body parts for holding work. Both hands must be used to operate this air tool, enabling control and safety. 15) Do not use this air tool if intoxicated, if you are using drugs or medication causing drowsiness or if you are tired. 16) Do not leave this air tool unattended, and disconnect from the air delivery system when not in use. Children must be supervised in the proximity of any air tool or work area. 17) Follow air supply manufacturer’s recommendation for connection of regulators, filters and other accessories. Do not install quick couplers directly on air tool, it puts unnecessary strain on the air inlet threads, instead install a short length of air hose to the tool. Do not over tighten fitting connecting to the air tool; this could cause the housing to crack. Use Teflon tape or pipe sealant carefully to prevent excess from entering the air tool. Wear hearing protection. Wear eye protection. Wear respiratory protection. Read the instruction manual BEFORE USING THIS AIR TOOL To ensure long life be sure to oil the tool daily. Pour 4 drops of Eagle air tool (SEA 20 non detergent) oil into the air inlet, and then run the tool for a few seconds to clean. If tool is an impact wrench fitted with a “Zirc” grease fitting: The hammer mechanism of this tool also needs to be greased from time to time (depending on usage). The tool is equipped with grease fitting for this purpose; use this connection to re-grease the tool using Eagle impact wrench grease. PLEASE USE EAGLE SEA 20 NON DETERGENT OIL OPERATING INSTRUCTIONS Add oil throughout the day when using. We highly recommend use of an in-line mini oiler to accomplish this. Blow out air line to clear dirt and moisture. The air regulator knob can be used as a throttle if there is no other means of regulating air. Turn the knob all the way in and adjust outward until desired speed is reached. Hold the tool away from work when starting. Set it down on the work evenly and make the cut. When cut is completed, lift tool away from work before stopping the motor. Use only discs rated at 20000 RPM or higher. Accessory retainers should be used to prevent ejection of the accessory which might injure persons. EXCEPTION: Retainers need not be used if in compliance with acceptable safety codes. In such cases, to avoid injury, the trigger should never be depressed unless the accessory is held firmly against the work piece. Accessory should be removed when tool is not in use. TROUBLESHOOTING SYMPTOMS Air tool does not run or runs slow. IMPACT WRENCH does not impact or impacts slowly. CAUSE REMEDY Lack of lubrication. Lubricate as per instructions. Dirt in tool. Clean with mixture of 50/50 tool oil/solvent. Lubricate after cleaning. Insufficient air pressure. Check regulator and air supply for leaks. Check compressor to make sure it operates at correct pressure. Make sure air hose is properly sized and that multiple hoses are not connected to same outlet. Check air hose for leaks and repair. Rotor blades worn or motor bearing worn or dirty. Replace blades, inspect clean or replace bearing. See causes (above). See remedies (above). Broken or worn impact mechanism. Inspect and repair as required. Wear hearing protection. Wear eye protection. Wear respiratory protection. Read the instruction manual PARTS BREAKDOWN INDEX PART DESCRIPTION QTY 1 44501-1 Housing 1 2 44502-1 Trigger 1 3 14504-1 Pin 1 4 14503-1 Pin 1 5 14503-1 Spring 1 6 14503-1 Lever 1 7 14505-1 O-Ring 1 8 14506-1 O-Ring 1 9 44509-1 Valve Stem 1 10 38021-1 Spring 1 11 14311-1 O-Ring 1 12 38023-1 Valve Plug 1 13 44513-1 Grip 1 14 44514-1 O-Ring 1 15 44515-1 Exhaust Ring 1 Wear hearing protection. Wear eye protection. Wear respiratory protection. Read the instruction manual 16 64335-1 Retainer Ring 1 17 64335-1 O-Ring 2 18 64337-1 Air Regulator 1 19 64338-1 O-Ring 1 20 64339-1 Air Inlet 1 21 64341-1 Spring 1 22 54941-1 Ball 1 23 14515-1 Bearing 1 24 14516-2 End Plate 1 25 14517-1 Ball 2 26 14518-1 Rotor 1 27 14519-1 Rotor Blade 4 28 14520-2 Cylinder 1 29 14521-2 Bushing 1 30 14524-1 Pin 1 31 14523-2 Front Plate 1 32 14525-1 Bearing 1 33 14826-1 Collet Holder 1 34 54834-4 Retainer 1 35 64341-1 Spring 2 36 54941-1 Ball 2 37 54837-1 Clamp Nut 1 38 54839-1 Pin 2 39 54838-1 Plastic Protector 1 40 54840-1 Nut 1 41 14830-1 Cutting Wheel 1 42 14831-1 Washer 1 43 14832-1 Screw 1 44 14833-1 Wrench 1 45 14834-1 Wrench 1 Arbor hole size...............................................................................................................3/8” Maximum cutting capacity..............................................................................................3/4” Wheel diameter.................................................................................................................3” Air pressure (PSI).............................................................................................................90 Average air consumption (CFM)......................................................................................4.0 Free speed (RPM)......................................................................................................20000 Air inlet (NPT).................................................................................................................1/4” Hose size (ID).................................................................................................................3/8” Wear hearing protection. Wear eye protection. Wear respiratory protection. Read the instruction manual Eagle Air Compressors Ltd. manufactures and distributes top of the line, high quality air compressors air compressor parts air powered accessories 1-800-551-2406 www.eaglecompressor.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Instance ID : uuid:d496590c-a59e-4423-8957-8837f4a117a3 Document ID : adobe:docid:indd:3b098318-eb3d-11da-846b-a7c60cb97166 Rendition Class : proof:pdf Derived From Instance ID : 408283ce-b525-11da-8d5f-bd7fd2f77cdc Derived From Document ID : adobe:docid:indd:184fccb5-b433-11da-8f9d-eb0b1d026d78 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00 Manifest Placed Y Resolution : 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Document ID : adobe:docid:photoshop:5a053279-9806-11da-a404-d45f205c6d93, uuid:3F940A6ACFB2DA11A7D6A8C2E7C05CA7, uuid:41940A6ACFB2DA11A7D6A8C2E7C05CA7, uuid:3F940A6ACFB2DA11A7D6A8C2E7C05CA7, uuid:41940A6ACFB2DA11A7D6A8C2E7C05CA7, uuid:3F940A6ACFB2DA11A7D6A8C2E7C05CA7, uuid:41940A6ACFB2DA11A7D6A8C2E7C05CA7, uuid:3F940A6ACFB2DA11A7D6A8C2E7C05CA7, uuid:41940A6ACFB2DA11A7D6A8C2E7C05CA7, uuid:3F940A6ACFB2DA11A7D6A8C2E7C05CA7, uuid:41940A6ACFB2DA11A7D6A8C2E7C05CA7, uuid:13F62724C9ECDA118179C3A17D616A6E, uuid:3F940A6ACFB2DA11A7D6A8C2E7C05CA7, uuid:41940A6ACFB2DA11A7D6A8C2E7C05CA7, adobe:docid:photoshop:5a053279-9806-11da-a404-d45f205c6d93 Manifest Reference Instance ID : uuid:44f2f8be-862e-4b20-830d-3c33991ce102, uuid:02e42c48-4cf4-4513-9da0-dc7ad166d2ec, uuid:44f2f8be-862e-4b20-830d-3c33991ce102, uuid:02e42c48-4cf4-4513-9da0-dc7ad166d2ec, uuid:44f2f8be-862e-4b20-830d-3c33991ce102, uuid:02e42c48-4cf4-4513-9da0-dc7ad166d2ec, uuid:44f2f8be-862e-4b20-830d-3c33991ce102, uuid:02e42c48-4cf4-4513-9da0-dc7ad166d2ec, uuid:44f2f8be-862e-4b20-830d-3c33991ce102, uuid:02e42c48-4cf4-4513-9da0-dc7ad166d2ec, uuid:f06aea45-04bd-457c-865d-5e25e2093eec, uuid:44f2f8be-862e-4b20-830d-3c33991ce102, uuid:02e42c48-4cf4-4513-9da0-dc7ad166d2ec Create Date : 2006:05:26 10:09:56-06:00 Modify Date : 2007:11:15 09:04:42-07:00 Metadata Date : 2007:11:15 09:04:42-07:00 Creator Tool : Adobe InDesign CS2 (4.0.2) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 9246 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Page Count : 8 Creator : Adobe InDesign CS2 (4.0.2)EXIF Metadata provided by EXIF.tools