goodbetterbest EX1PS3 BLUETOOTH HEADSET User Manual Print

Goodbetterbest Limited BLUETOOTH HEADSET Print

Contents

Users Manual

EX-01 BLUETOOTH™ HEADSET FOR PS3™
EXCLUSIVELY DESIGNED FOR GAMING ON PS3™
TM
MODEL G320
Copyright © 2007, 2008, 2009 GBB Group. All Rights Reserved. Gioteck™ and the Gioteck Logo are trademarks of GBB Group Ltd. PlayStation is a registered
trademark of Sony Digital Entertainment. This product is not endorsed or manufactured by Sony Digital Entertainment.
Playstation®, Playstation 3® & PS3® are registered trademarks of Sony Computer Entertainment Inc. All other third party products and company names
mentioned are either the trade names or trademarks of their respective owner.
02 | CONTENTS & PRECAUTIONS
CONTENTS
03 | Product Features & Details
04 | Setup
06 | Reversing Earhook
08 | Charging
09 | Operation
10 | Troubleshooting
11 | Care & Maintenance
PRODUCT FEATURES & DETAILS | 03
thankyou
Thank you for purchasing the EX-01 Bluetooth™ Headset from Gioteck. We hope that this product will go beyond your
expectations for a quality made accessory. Please read this booklet thoroughly before using the product and review the PS3
manual for additional details regarding PS3 operation. Thank you & enjoy!
features & details
The EX-01 Wireless Bluetooth™ Headset has been exclusively designed for gamers and gaming, not mobile phones! So you
can now maximise your game time without an irritating, uncomfortable earpiece, and still hear your opponent creeping up
behind you on your surround sound system!
precautions
• Use only as intended.
• This is a precision product and should be
handled with care.
• To avoid electrical shock, do not take the
product apart.
• Do not store in areas of extreme
heat or cold.
• Do not allow product to get wet or dirty;
doing so may damage the product.
• Do not clean with benzene, paint thinner,
acetone, alcohol, or other such solvents.
warnings
This symbol indicates important
installation, operation or
maintenance instructions. Always
follow these instructions closely.
This symbol is intended to alert the
user to the presence of potentially
harmful or dangerous substances
within the product’s enclosure. This
symbol may also indicate a procedure
that will void your product warranty.
Recycling is important and will help
to protect our environment and
reduce landfill waste.
This symbol on the product or in the
manual means that your electrical
and electronic equipment should NOT
be disposed of in normal household
waste at the end of its life. It should
be disposed of separately. Please
take it to a collection point for
electrical waste.
01 | Microphone
02 | Speaker
03 | Earhook
04 | LED Feedback
05 | Volume Decrease
06 | Power / Mute
07 | Volume Increase
01
02
03
04
05
06
07
04 | SETUP SETUP | 05
Within the Settings' menu,
press X on Accessory Settings.
Enter 0000 (four zeros) as the
Pass Key and press X on OK.
Press X on the icon labelled:
Audio Device Settings.
pairing your headset
Press X on the icon labeled:
Register Bluetooth® Device.
Press X on Yes.
At the next screen, prepare the
Headset to be paired with the PS3 by
holding down the power button until
the LED flashes Blue & Green. When
the LEDs are flashing alternately
Blue & Green the headset is ready
to be paired.
9
SECONDS
Press X on Start Scanning.
Once Scan is complete, the PS3 will
recognize all Bluetooth devices
within range.
Locate EX-01 from the list of available
devices and press X to be prompted
for a Pass Key.
You should then be taken to a new
screen stating: Register completed.
Go to the Settings menu, press X
on Accessory Settings.
Choose PS3 EX-01 as your input and
output device from the lists.
Press X to confirm your choices.
Scroll down and press X when you have
highlighted Connect [Bluetooth®].
Your Headset is now ready to use...
enjoy :)
06 | REVERSING EARHOOK REVERSING EARHOOK | 07
reversing the earhook
The EX-01 ships with two earhooks, each marked [L] for the left ear and [R] for the right ear.
After selecting the appropriate earhook, follow the instructions below:
Using your
fingernail tip,
carefully prise
open the shiney
fascia shell from
the back of the
headset upwards
and forwards.
REAR HOOKS
Once clear of the
body, unhook from
the front hook.
Lift clear
from the body.
Noting the 4
earhook pins,
gently pull away
the existing
earhook, and
store safely.
Line-up the
earhook holes
with the pins and
gently guide the
replacement
earhook over the
top until set in
position.
Hook the front
fascia hook under
the front hook
cavity, then slowly
push the rear
hooks into place.
FRONT HOOK FRONT HOOK
EARHOOK PINS
EARHOOK HOLES
08 | CHARGING OPERATION | 09
charging your headset
The headset contains a rechargeable Li-ion polymer battery. Prior to using the headset for the first time, it is strongly
recommended to fully charge the battery.
Connect the USB cable to your PS3™ [1] and the mini usb [2] to the headset's charging socket [3]. The LED will illuminate
green during the charging process and will be off when fully charged. NOTE: Charging indication will be delayed for a few
minutes if the headset has not been used for a long time.
Operating your headset
To power on your headet, press and hold the power button for 3 seconds until the LED flashes Blue. NOTE: If the LED
flashes Green only, the battery will need to be charged.
To power off your headet, press and hold the power button for 3 seconds until the LED flashes Green.
charging time
Normally the battery is fully recharged
within 3 hours. As soon as the battery is fully
charged, the LED will be off or weak Green.
Disconnect the USB cable from the PS3™
and the headset.
game time
The fully charged battery offers up to 4
hours continuous use. It is advisable to
always recharge after lengthy gameplay
so the headset is fully charged for the
next round.
adjusting volume
Tap the + button to increase the volume in
increments until the headset reaches your
desired volume level.
Tap the - button to decrease the volume in
increments until the headset reaches your
desired volume level.
muting
Press the power button briefly
(less than 1 second) repeat the
process to un-mute.
02
01
03
VOLUME DECREASE
VOLUME INCREASE
Do not try to
pair the headset
to the console,
when the
headset is
attached to the
USB cable.
If it is attached
it will not pair. to
the PS3™.
10 | TROUBLESHOOTING CARE & MAINTENANCE | 11
troubleshooting
Having trouble with your EX-01 Bluetooth™ Headset? These troubleshooting steps will show you the smoothest path to
resolving your issue. Be sure to perform troubleshooting before having your product serviced.
care & maintenance
If the battery is leaking and you come in contact with it, take the following actions:
Contact with eyes: Contact with skin/clothes:
Do not rub, Flush with clean water. Clean infected area with water.
Seek medical attention immediately. Contact your doctor immediately if swelling or soreness occurs.
The PS3 is unable find the Headset.
• If the Headset has been paired with another Bluetooth device, the PS3 will have trouble
finding the Headset. Either remove the Headset from the paired device or turn off the
Bluetooth power on the paired device.
The Headset cannot be activated after being charged for 15 minutes.
• To activate the Headset, the battery needs to charge for at least 40 minutes. It is highly
recommended to fully charge the battery before use.
No indication of charging is shown.
• Charging indication may be delayed for a few minutes if the headset has not been used for
a long time (more than a month) or if the battery is drained.
No sound can be heard from the Headset.
• Make sure that the two devices have been paired.
• Make sure that the two paired devices are within 30 Ft. (9.15 meters)
of each other.
• Make sure that the Headset is turned on and charged.
• Check In-game settings.
email: support@gioteck.com
www.gioteck.com
storage
It is best to store the Headset in a dry
and dust free area. Do not store near
extreme temperatures.
REPLACING THE BATTERY
Never attempt to replace the
Ion-Lithium battery
environment
Be conscious of our environment,
Ion-Lithium batteries are recyclable.
Please help to conserve the environment
by recycling your battery.
Never open the Headset unless you plan
to dispose of the Headset and recycle
your battery. Opening the Headset will
void your warranty. Work in an area out of
reach of children so that small parts
cannot be swallowed. Make sure to follow
the directions carefully to avoid injury.
Always make sure to cover any metal
contacts on the battery with a piece
of tape when disposing of the battery.
Never handle damaged or leaking
Ion-Lithium batteries. Do not allow
battery to come in contact with extreme
heat or fire. Avoid direct sunlight or heat
sources such as a heater.
RECYCLING ION-LITHIUM BATTERIES.
Please help preserve our environment;
Ion-Lithium batteries are recyclable. Make
sure to return your battery to a
collection and recycling center near you.
FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE 1: The manufacturer is not responsible for any changes or modifications not expressly
approved by the manufacturer for compliance, such modifications could void the user’s authority
to operate the equipment.

Navigation menu