i Mobile Technology IC-8 Tablet PC User Manual Manual

i-Mobile Technology Corporation Tablet PC Manual

Contents

Manual

Download: i Mobile Technology IC-8 Tablet PC User Manual Manual
Mirror Download [FCC.gov]i Mobile Technology IC-8 Tablet PC User Manual Manual
Document ID2255900
Application IDjJLozgfazqsRJuRFizybEA==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize182.48kB (2280980 bits)
Date Submitted2014-04-30 00:00:00
Date Available2014-04-30 00:00:00
Creation Date2013-05-31 10:46:17
Producing SoftwarePDF-XChange 4.0.163.0 [ABBYY] (Windows XP Home Edition Service Pack 3 (Build 2600))
Document Lastmod0000-00-00 00:00:00
Document TitleManual

User’s Manual
IC-8 (2013/Mar./31)
Copyright
This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all
rights reserved.
Neither this manual, nor any of the material contained herein, may be reproduced without the express written consent of the
manufacturer.
Disclaimer: The manufacturer makes no representations or warranties with respect to the contents hereof and specifically
disclaim any implied warranties of merchantability or fitness for any particular purpose. The manufacturer is not liable for
technical and editorial error for this guide. The manufacturer reserves the right to revise or make changes to this publication
without notice or obligation of the manufacturer to notify any person of such revision or changes.
Software Licenses
The software included with the product and referenced in this document is furnished under a License Agreement. This
Agreement specifies permitted and prohibited uses of this product.
General Guidelines
Read all of the instructions carefully.
Save the instructions for future use.
To ensure follow all warnings and instructions marked in the product documentation and within the computer.
Except as explained elsewhere in this manual, do not attempt to service the computer yourself. Opening or removing
covers might expose you to dangerous voltage points or other risks. Refer all servicing of marked components to qualified
personnel.
Power Cord Requirements
The power cord you received with this computer conforms to local specifications for use in the country where you purchased
it. Power cord use in other countries may require an additional adapter and/or separate power cord. For additional information
on local power requirements, contact an authorized dealer, reseller, or service provider.
About the AC Adapter
The AC adapter will automatically recognize any compatible power supply connected to the computer. The AC adapter can
also be used to recharge the battery, which begins immediately after the AC Adapter cord is connected. A green LED will light
to confirm charging is in progress. The ideal range for safe operation of the computer is from 100 ~ 240V AC.
1. AC Power Cord / 2. AC Adapter / 3. DC (Direct Current) Cord
Warning :
Using the AC adapter to power other devices can damage the adapter or the device. This AC adapter is only designed for
use with the product.
Be sure to only use the AC adapter that comes provided with this product or a compatible option from the manufacturer.
Other adapters may cause damage to the computer and will not be covered under the warranty.
Grasp the adapter plug and not the cord, when unplugging the adapter from an electrical outlet.
If the power cord becomes damaged (exposed or frayed, etc.), replace with a new AC adapter. Using a damaged cord may
cause an electrical shock and may result in fire.
Power off and unplug the AC adapter from the computer before unplugging it from the electrical outlet.
Battery (Lithium-Ion)
NOTE: Refer to following hazard statement within the service and operating documentation or on the adjacent label
to the battery.
1. English
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
INSTALLED. REPLACE ONLY WITH SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER. DISCARD OF USED
BATTERIES IN ACCORDANCE WITH THE MANUFACTURER'S
INSTRUCTIONS.
2. French
IL Y A DANGER D'EXPLOSION S'IL Y A REMPLACEMENT
INCORRECT DE LA BATTERIE. REMPLACER UNIQUEMENT AVEC
UNE BATTERIE DU MÊME TYPE OU D'UN TYPE RECOMMANDÉ
PAR LE CONSTRUCTEUR. METTER AU RÉBUT LES BATTERIES
USAGÉES
CONFORMÉMENT
AUX
INSTRUCTIONS
DU
FABRICANT.
3. German
VORSICHT ! Explisionsgefahr bei unsachgemäßen Austausch der
Batterie.
Ersatz nur durch denselben oder einem vom Hersteller empfohlenem
ähnlichen Typ.
Entsorgung gebrauchter Batterien nach Angaben des Herstellers.
4. Swedish
Explosionsfara vid felaktigt batteribyte.
Använd samma batterityp eller en ekvivalent typ som rekommenderas
av apparattillverkaren. Kassera använt batteri enligt fabrikantens
instruktion.
5. Danish
Lithiumbatteri- Eksplosionsfare ved fejlagtig håndtering.
Udskiftning må kum ske med batteri af samme fabrikat og type.
Lever det brugte batteri tilbage til leverandoren.
6. Norwegian
Ekspolsjonsafe ved feilaktig skifte av batteri.
Benytt samme batteritype eller en tilsvarende type anbefalt av
apparatfabriknten.
Brukte batterier kasseres I henhold til fabrikantens instruksjoner.
7. Finnish
Paristo voi räjähtää, jos se on virheellisesti asennettu.
Vaihda paristo ainostaan laitevalmistajan suosittelemaan tyyppiin.
Hävitä käyteet paristo valmistajan ohjeiden mukaisesti.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the
instructions, may case harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which to receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cord is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Do not make any
changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should
be made, you could be required to stop operation of the equipment.
FCC Caution:
1. The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions
1 This device may not cause harmful interference.
2 This device must accept any interference received, including interference that may cause undesired operation.
2. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
3. FCC RF Radiation Exposure Statement
This device has been tested for compliance with FCC RF Exposure (SAR) limits. The equipment complies with FCC RF
radiation exposure limits set forth for an uncontrolled environment.
4. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user
authority to operate the equipment.
CE Statement
This equipment has been designed to comply with EMC directive 89/336/EEC
And Decision 768/2008/EC
As an amended by 92/31/EEC and the Low Voltage directive 2006/95/EC,
This equipment has been comply with EMC directive 2011/65/EU And Decision 768/2008/EC
Manufacturers will need to test and approve the product to these directives.
Table of Contents
BEFORE USING YOUR COMPUTER .................................................. 1
Product Features .......................................................................... 2
Installation Guidelines ................................................................... 4
CHAPTER 1...............................................................................6
GETTING STARTED ....................................................................... 6
Unpacking the Product.................................................................. 7
Packing List .................................................................................. 7
Power Supply ............................................................................... 8
Using the Battery ...................................................................................... 8
To install and remove the Battery Pack.................................................... 8
Installing the Battery/ Remove / Replacing the Battery ........................... 9
Caring for the Battery……………………………………………………….11
Using the AC adapter ............................................................................. 11
The Stylus Pen ........................................................................... 13
Performing Mouse Clicks and Other Procedures with the Stylus Pen .. 13
For Optimal Performance from the Stylus Pen ...................................... 14
The CMOS Camera .................................................................... 14
CHAPTER 2............................................................................. 15
SYSTEM OVERVIEW .................................................................... 15
Front View of the Computer......................................................... 16
Right Side View of the Computer ................................................. 21
Left Side View of the Computer ................................................... 22
Top View of the Computer ........................................................... 23
Bottom View of the Computer ...................................................... 23
Rear View of the Computer ......................................................... 24
CHAPTER 3............................................................................. 26
PROTECTING AND MAINTAINING ................................................... 26
Caring for Your Computer............................................................ 27
Routine Care ........................................................................................... 27
Caring for the Battery ............................................................................. 27
Caring for the AC Adapter ...................................................................... 28
Caring for the Touch Screen Display ..................................................... 28
The System BIOS Utility.............................................................. 29
Adjusting the Video Resolution .................................................... 30
Changing the Video Resolution of the Computer .................................. 30
CHAPTER 4............................................................................. 31
SPECIFICATIONS & SOFTWARE..................................................... 31
Specifications and Standard Features ......................................... 32
Software..................................................................................... 35
Using the Smart Panel to Calibrate the Screen ..................................... 35
Using The Front Panel Hot Key Utility ................................................... 36
Define the function for Hot Key Utility .................................................... 38
TM
Using the Bluetooth Utility, BlueSoleil .................................................39
Making a 3.5G Connection and Disconnection ..................................... 41
Using the CMOS Camera ....................................................................... 42
Using The RFID ......................................................................................43
Using the Minismart card ....................................................................... 44
Using the Barcode Scanner ................................................................... 45
Using the MSR ........................................................................................ 47
Using the GPS ........................................................................................ 47
Using the Brightness Adjust ................................................................... 49
Trouble Shooting..................................................................................... 50
Before Using Your Computer
Congratulations on your purchase of the product.
You will soon be in command of the worlds most lightweight,
efficient and secure solution for managing all of your
technology and mission critical data. Scale the computer and
streamline the costs of day-to-day business operations and
multimedia demands. Discover the computer’s unparalleled
in-the-field versatility for efficiently and reliably coordinating a
myriad of tasks without costing a fortune.
Chapter Preview:
Product Features
Installation Guidelines
The Instructions Manual
Product Features
The product is a portable multimedia device empowering highly mobile users
with wireless computing capabilities for day-to-day business and wireless
applications. Its light weight and supreme portability combined with
state-of-the-art
multimedia
capabilities
provide
exceptional
writing,
maneuvering, and on your feet computing. The product’s primary features
include:
Processor and OS (Operating System): INTEL Linc Atom Processor
Dual Core N2600 1.6GHZ/1M L2 Cache and Microsoft® Windows
Embedded Standard 7/ Microsoft® Windows 7 Professional / Linux OS, a
stable platform, providing exceptional performance for highly mobile users
under extreme and variable conditions.
Multimedia LCD Display: 8”-inch TFT 1024x768 (XGA) LCD with Touch
Screen Control Panel (LED back light / Sunlight readable) and Smart Panel
Application enhancing user’s ability to view data outdoors and under
moving conditions.
Complete Connectivity from Anywhere: The computer’s built-in
®
Bluetooth 3.0 , IEEE 802.11b+g+n WLAN and 3.5G Module offers the
mobile user the maximum opportunities to stay connected from anywhere,
ensuring uninterrupted data sharing and synchronization. Limitless instant
accesses to business critical information.
Integrated Ports and Adaptability: Multiple I/O ports (2 x USB 2.0,
Ethernet ,RS-232 Port) provide optimum versatility for any industrial or
Business needs. Its ultra light weight and integrated wireless capability
enable an effective mobile office. Multiple carrying options provide quick
on-the-fly versatility while executing daily tasks comfortably and efficiently.
Before Using Your Computer
Special Integrated Functions: Multiple special devices, RFID
Bar
Code Fingerprint Scanner MSR Smart Card Reader 2M / 5M Pixel
both sides Camera, can provide useful functions for business and industrial
area.
Enhanced Protective Equipment
The computer, designed for IP65 ingress protection rating, can provide
indoor and outdoor protections of no ingress of dust and water jets against
enclosure without harmful effects. Furthermore, the computer is equipped
with 4 corner buffers to avoid drop-shock damages.
Enhanced Security Information:
The computer provides the Fingerprint device to secure your data
protection.
Note: Read the following Instructions Manual carefully before unpacking
and setting it up. Refer to the Instructions Manual if you encounter any
problems. Keep this Instructions Manual on hand for your reference.
The Instructions Manual
Installation Guidelines
Read the following before assembling or disassembling the computer:
1. Follow all warnings and instructions marked on the product and within the
Manual.
2. Before you begin cleaning the computer, make sure that you have
unplugged all power cords and the device is Powered Off. Use a damp
cloth for cleaning. Do not use liquids of any kind of aerosol cleaners.
3. Never place the computer on an unstable surface; it may fall, causing
serious damage to it.
4. Avoid using a telephone (other than a cordless type) with the computer
during an electrical storm. There may be remote risk of electric shock from
lightning.
5. To ensure optimum performance and to protect the computer from
overheating, ventilation slots must not be covered or obstructed in any way.
The computer should never be placed near a radiator, heat register or in a
built-in cabinet unless adequate ventilation is provided.
6. The computer should only be operated using the specified power indicated
on the Warning Label located on the battery. If you are unsure of the type of
power available to your locale, consult a dealer or the local power
company.
7. If using an extension cord with the computer, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also note that the total rating of
all the devices plugged into the circuit does not exceed the fuse rating.
8. Never force objects of any kind into the computer’s ventilation or housing
slots as they may contact dangerous voltage points or spark resulting in
electrical shock or a fire. Keep all liquids of any kind away from the
computer.
9. Always disconnect all telephone lines & all power cords from the wall outlet
before servicing or disassembling this product. Refer to the dealer or a
qualified technician under the following conditions:
Before Using Your Computer
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
c. If the computer has been exposed to rain or water.
d. If the computer does not operate normally when the operating
instructions are followed. Adjust only those controls that are specified in
the Operating Instructions or improper adjustment may require
calibration again from a qualified technician.
e. If the computer has been dropped or the housing has been damaged.
f. If the computer experiences a distinct change in performance, indicating
a need for service.
CHAPTER 1
Getting Started
Chapter Preview:
Unpacking and setting up the Product
Packing list
Power Supply
The Stylus Pen
CHAPTER 1 - Getting Started
Unpacking the Product
Before unpacking the product, prepare a suitable workspace for your
computer. Make sure the workspace is level, stable and near an electrical
outlet.
1. Open the box and remove the contents preserving the integrity of the box
as you may need it and all of the packing materials for future shipping.
2. Inspect the contents for damage. If you find any irregularities or anything
appears to be missing, contact your Dealer immediately. Check that the
following components are included in the box:
Packing List
Figure 1
1. The Computer Unit
4. Hand Strip
2. Belt
5. Power Cord
3. AC Power Adapter
6. Battery
The Instructions Manual
Power Supply
The computer can be powered using either the built in battery or the AC
Power Adapter plugged into any grounded AC power outlet.
Using the Battery
The primary source of power for the computer is a Lithium-Ion battery pack.
The battery pack will first need to be installed on the backside of the computer.
After following the battery installation instructions below, plug the AC adapter
into any electrical outlet and the computer will begin recharging immediately.
In the future, you should not have to access the battery pack unless you wish
to replace it with a fresh one.
Note:
1. The Battery LED lights green when charging and will turn off when the
battery is fully charged.
2. When charging the first time, it is recommended that the battery be
allowed to charge for no less than eight hours.
3. It will take a longer time to complete the charging process, if the user is
using the computer at the same time.
4. Charging temperature range is regulated between 0
and 40
. Do not
charging the battery out of recommended temperature range.
5. Do not discharging battery below 10 % level, It is recommended
charging the battery within 3 months,
CHAPTER 1 - Getting Started
To install and remove the battery pack:
Using the Power Switch to power down the computer.
Battery Lock
Battery Switch
Installing the Battery
Turn the lock knob to Unlock position and gently put the batteries into
the battery bay. Then, turn the lock knob to Lock position.
Removing/Replacing the Battery
Turn the lock knob to Unlock position and Turn the switch gently take
out the batteries. Carefully lift the batteries out.
Battery Power Indicator
Press the battery status switch to display the capacity of the battery.
The Instructions Manual
Caring for the Battery
Do not heat, tamper or place the battery in water or near a fire.
Do not subject the battery to unusual forces such as hitting it, stepping on it
or dropping it.
Do not attempt to open or service the battery pack.
Only replace the battery with the same model or one of compatible design.
Using the AC Adapter
When connecting the computer to external power:
1. Plug the DC power cord into the DC jack on the computer.
2. Plug the 3-prong AC power adapter cord into a grounded electrical outlet.
Use the AC adapter to power the computer or recharge the battery when it is
low.
Caring for the AC Adapter
Be sure to only use the AC adapter that comes provided with this product
or a compatible option from the manufacturer. Other adapters may cause
damage to the computer and will not be covered under the warranty.
Grasp the adapter plug and not the cord, when unplugging the adapter
from an electrical outlet.
If the power cord becomes damaged (exposed or frayed, etc.), replace with
a new AC adapter. Using a damaged cord may cause an electrical shock
and may result in fire.
Power off and unplug the AC adapter from the computer before unplugging
it from the electrical outlet.
10
CHAPTER 1 - Getting Started
The Stylus Pen
The stylus pen emulates all of the functions of a standard mouse and can be
effortlessly used in place of a mouse and a standard keyboard. The stylus pen
tucks into a designated holder on the lower left side of the computer.
Performing Mouse Clicks and Other Procedures with the Stylus Pen
To select an item or open a menu on the screen as you usually left click on an
external mouse:
Tap the item or menu with the tip of the stylus pen
To double-click an item on the screen as you normally double click an external
mouse:
Tap the item twice with the tip of the stylus pen. (You need to lift the stylus
pen from the screen quickly between taps.)
To select an item as you normally right click on an external mouse:
Press the tip of the stylus pen on the item and hold it until the pop-up
menu appears, then tap the choice.
You can also use the stylus pen to write characters, symbols and draw
pictures using additional handwriting software, for example, Windows XP
Painter.
The five basic stylus pen operations and their external mouse equivalents can
be quickly referenced in the table below:
Stylus Pen
External Mouse
Point
Point
Tap
Click
Double-tap
Double-click
Tap and hold
Right-click
Drag
Drag
11
The Instructions Manual
For Optimal Performance from the Stylus Pen
Hold the stylus pen in the same way that you would hold a pen or pencil
when writing on paper.
Hold the computer securely when mobile and using the stylus pen.
Lift and tap the stylus pen quickly between double taps. Avoid using the
stylus pen to push the computer buttons.
For the most reliable operations, hold the stylus pen and tap vertically,
perpendicular to the LCD display.
12
CHAPTER 2
System Overview
This chapter contains six illustrations, highlighting each
external component and its respective functions.
Chapter Preview:
Front view of the Computer
Right side view of the Computer
Left side view of the Computer
Top view of the Computer
Bottom view of the Computer
Rear view and Build In Back Stand
The Instructions Manual
Front View of the Computer
RFID
Microphone
2M CCD
Power button
Barcode
Trigger
8” TFT Panel
Rubber Corner
Hot key1
Hot key2
Hot key3
Hot key4
Status LED
Fingerprint
Brightness
Adjustment
8 inch TFT (1024x768) LCD Display with Touch Screen Control
Panel:
Data can be entered the computer module using the stylus pen or a
soft/USB/wireless keyboard. A soft keyboard can be located by tapping
the keyboard icon in the bottom right on the desktop. Data can also be
entered via a USB keyboard plugged into the USB port on the right side of
the computer. The computer’s USB ports support most USB keyboards
and pointing devices.
14
CHAPTER 2 – System Overview
RFID Device :
The HF RFID Reader device is a communication device which includes
complete circuits to achieve reading from and writing to the RFID tag. It
conforms to various industry standard RF protocols of NFC.
Microphone:
Effortless input of monaural sound recording.
2 M CMOS Camera :
The build-in front 2M pixels CMOS Camera supports video applications
for all media software. The user can make a video communication in the
network.
Power Button:
The computer Turn On / Off
Barcode On/Off
The button provide a Trigger function for Barcode Scanner
Hot Key
These 4 quick access buttons are used for navigating applications in the
Microsoft Windows 7 environment (or relevant OS) and to setup the
System BIOS Utility in DOS mode (alternative function).
Status LEDs:
LED Indicator
Relevant
Component
Description
Orange (Flashing)
Hard Drive
Disk Accessing
Green (Off)
Battery
Battery Available
Green (Solid)
Battery
Battery Charging
Blue (Solid)
Power
System Powered On
15
The Instructions Manual
Fingerprint:
The device is virtually immune from attacking of fake finger. It can
self-calibrate each sensor’s output signal for different skin
conditions like sweaty, scarred and dry, to be an excellent image
quality.
The Brightness Adjustment
On MCU-base programmable controller with capacitance sensors, the user
can adjust the screen brightness with fingers directly.
Rubber Corner
The Rubber Corner provides a protection of falling down and related
damages.
16
CHAPTER 2 – System Overview
Right Side View of the Computer
DC In
USB
RS-232
DC-in Jack:
Plug the DC (Direct Current) end of the AC Adapter into this jack for
external power and battery recharging. Before plugging in the power cord,
you must first verify that the external power voltage is appropriate for your
geographical area.
USB 2.0 Ports:
Permits hot plugging of USB peripheral devices to the computer. The
USB ports support most USB mouse and keyboard devices.
RS-232 Port:
Offer an interface connecter of RS-232 that extended application of
instruments for industrial use.
17
The Instructions Manual
Left Side View of the Computer
Network
Jack(RJ45) Micro SD
HDMI
Mini Smart card Reader
Strap Hook
Network Jack (RJ45):
Interfaces with an Ethernet 10/100/1000 Mbps Base-T network
connection.
HDMI :
The High Definition Pictures can be transmitted to display from computer
with the HDMI cable.
Mini Smart Card Reader: (optional)
This device can read a various data include ATM card for business.
Micro SD
Micro Secure Digital (SD) Card Slot
Strap Hook:
The user can grasp the machine by using the hand strip,
18
CHAPTER 2 – System Overview
Bottom View of the Computer
Docking Port
Docking Port
The extended multi-function included: the battery charger port, the USB
ports supporting most USB mouse and keyboard devices, RJ-45 Internet
port, RS-232 port, DC-In Jack, Microphone and Headphone.
19
The Instructions Manual
Top View of the Computer
Barcode
Scanner
M.S.R
Barcode Scanner: (optional)
Omni directional bar code reading.
Scan rate of up to 200 scans per second in linear emulation mode or 56
scans per second in Omni directional mode.
Fully compatible with Intermec’s family of decoded engines.
MSR: (optional)
The reader delivers superior reading performance with the ability to
encrypt sensitive card data.
20
CHAPTER 2 – System Overview
Rear View of the Computer
Stylus Pen
MMCX Connector
Rear CMOS
Camera
Battery
Switch
Battery Lock
Speaker
Battery Pack
Battery Indicator
Battery Indicator
Switch
Stylus Pen:
A stylus pen is used to activate the touch screen display and functions in
the same way as an external mouse. The stylus pen is partially visible
from the left side of the computer and can be located by pulling it from its
secure housing. Only use the tip of the stylus pen when interacting with
the LCD display to prevent damage to the display surface.
21
The Instructions Manual
GPS: (optional)
Support 20-channel GP
Rear CMOS Camera: (optional)
The build-in 5M pixels CMOS camera module supports auto reverse
function. Images can be captured and disseminated instantaneously.
Internal Speakers:
The computer’s built-in a single speaker support audio applications for all
media software. Volume and equalizer control can be adjusted via the OS
or additional multimedia application software. Sound will mute when
headphones are detected.
Battery Pack:
A n Internal battery one cell DC 3.7V/ 920 mAh support hot swap under
S3 state
A 6-cell 6200mAh removable Lithium-Ion battery pack comes standard
with the computer. Each cell comes equipped with short circuit,
over-charge, over-discharge, over-current and abuses protection.
Hand Strip:
To adjust the strip length for your convenience use.
22
CHAPTER 3
Protecting & Maintaining
Chapter Preview:
Caring for your Computer
The System BIOS Utility
Configuring DRAM, HDD and SIM Card
Connecting to a Local Area Network
Adjusting the Resolutions for the Computer’s Display and
an External Display
The Instructions Manual
Caring for Your Computer
To guarantee a long life for the computer and to ensure it functions optimally,
pay particular attention to the following recommended maintenance
guidelines.
Routine Care
Follow these guidelines to keep the computer working properly:
Do not attempt to disassemble or modify the computer in any way.
Do not place anything on top of the device or its LCD display to prevent
damage to the screen.
Avoid using and storing the computer in locations where static or electrical
interference can damage in the internal components.
Avoid using and storing the computer in locations exposed to extreme
temperature fluctuations, likely condensation, or direct sunlight.
Keep the device away from moisture such as exposure to liquids or
precipitation.
Only operate the device with the battery pack installed, even when using
external power. This ensures the computer will have the sufficient power to
maintain and save data when disconnected from the external power
source.
Store the device in its docking station when not in use.
Caring for the Battery
Do not heat, tamper or place the battery in water or near a fire.
Do not subject the battery to unusual forces such as hitting it, stepping on it
or dropping it.
Do not attempt to open or service the battery pack.
Only replace the battery with the same model or one of compatible design.
24
CHAPTER 3 – Protecting & Maintaining
Caring for the AC Adapter
Be sure to only use the AC adapter that comes provided with this product
or a compatible option from the manufacturer. Other adapters may cause
damage to the computer and will not be covered under the warranty.
Grasp the adapter plug and not the cord, when unplugging the adapter
from an electrical outlet.
If the power cord becomes damaged (exposed or frayed, etc.), replace with
a new AC adapter. Using a damaged cord may cause an electrical shock
and may result in fire.
Power off and unplug the AC adapter from the computer before unplugging
it from the electrical outlet.
Caring for the Touch Screen Display
Never spray liquids of any kind directly onto the display screen or allow
excess liquid to drip into the device.
Never place anything on the display screen that could cause damage to the
LCD display, for example, drinks and food.
Never scratch the surface of the LCD display with any sharp or damaging
objects.
Avoid exposing the computer to direct sunlight or excessive ultraviolet
radiation for an extended period of time.
To clean the exterior of the device, wipe the screen and the housing with a
soft, damp cloth moistened with water. Never use soap or other cleaning
products on the LCD screen. It may discolor the outer coating and damage
screen visibility.
25
The Instructions Manual
Adjusting the Video Resolution
Changing the Video Resolution of the Computer
1. Choose one of the two options to open the Display Properties dialog
box:
1.1. Click the right button of the mouse on the desktop and select
Properties from the menu. or,
1.2. Click the Start button and select Control Panel. Double click the
Display icon.
2. Select the Settings tab. Select the Advanced option.
3. Select the Adapter option. Select the List All Modes.
4. Confirm the desired display mode (ex. 1024x768) True Color (32 bits)/
60Hertz).
26
CHAPTER 4
Specifications & Software
Chapter Preview:
Specifications and Standard Features
Software
The Instructions Manual
Specifications and Standard Features
Processor
INTEL Atom processor Dual Core N2600 1.6 GHZ
Operating System
®
Microsoft Window 7 ( Embedded / Professional )
Option: Linux
System BIOS
Phoenix BIOS
Memory
1x204 pin DDR III SO-DIMM Socket support/ up to 2GB
Display
8-inch TFT (1024x768) LCD Touch Panel
Simulation to 1024x768 by Hot Key
LED Back Light / Sunlight Readable
Pointing Device
Touch Panel Screen and Stylus Pen Input Device
Storage
32G ~256GB Solid State Drive (SSD)
28
CHAPTER 4 – Specifications & Software
Wireless Connectivity
Wireless LAN : IEEE 802.11b+g+n
®
Bluetooth
3.5G Module
WCDMA R99 : maximum data rate of 384 kbps
HSDPA : Downlink Category 8 (7.2 Mbps) or 10 (14.4 Mbps)
HSUPA : E-DCH data rates of up to 5.76 Mbps for 2 ms TTI (UE
category 6) uplink
GSM R99 : Supports CS SMS
GPRS : CS schemes – CS1, CS2, CS3, and CS4
CDMA 1xEV-DO : High-speed peak data rates of 3.1 Mbps on the
downlink and 1.8 Mbps on the uplink
CDMA1x : Supports up to 153.6 kbps data throughput on both forward
and reverse links
EDGE : Downlink coding schemes – CS 1-4, MCS 1-9
Communication
10/100/1000 Mbps Base-T Ethernet LAN
CMOS Camera
2M/5M Pixels CMOS Camera Module
Support Auto Reverse Function
RFID
13.56 MHz Mifare DES Fire Reader / ISO 15693 Reader
MSR
Encrypted MSR
Bar Code Scanner
Support 1D/2D bar code
Smart Card Reader
Operates ISO 7816
29
The Instructions Manual
Fingerprint
Sensor Scan Area: 9.6 mm x 0.2 mm
Image size: 192 x 4 pixels
Image resolution: 508 DPI
Automatic image calibration
Brightness
Adjust by Slide S.W
GPS (optional)
Support 20-channel GPS
Multimedia
Internal microphone and single speakers
External volume on/off controls via hot key setting
Battery
Internal one 1-cell 920mAh
External one 6-cell 6200mAh Removable Lithium-Ion Battery Pack. Short
circuit, over-charge, over-discharge, over-current and abuses protected.
Power Supply
External AC Adapter (175g / AC Input 100~240V, 50/60Hz, 3 Pin Inlet / DC
Output 16V, 4.0 A, DIM:107.7mm x 45.9 mm x 30 mm ) includes Power
Cord.
Included Accessories
Stylus pen, Hand strip, power cord, adapter and belt.
30
CHAPTER 4 – Specifications & Software
Interface
2x USB 2.0 Ports
Micro SD Card Port
RS-232 Port
HDMI Port
Ethernet (RJ45)
Microphone Build-in
Speaker
Docking Port
DC Power In
LED Status Indicators :
HDD LED
(Orange)
Battery LED (Green)
Power LED
Mobility
(Blue)
Flashing
Off
Solid
Solid
–
–
–
–
Disk Accessing
Battery Available
Battery Charging
System Powered On
Dimensions: 251mm x 181mm x 39.12mm
Warranty:
ONE year limited warranty parts.
Docking
USB 2.0 x 4
RJ-45
RS-232
DC-IN
Micro Phone
Headphone
VGA Port
Environmental Specifications
Operating temperature : -10° to 40°C (14° to 104°F)
Storage temperature
: -20° to 75°C (-4° to 167°F)
Certification of System
FCC ID / CE / EN060950-1 IP65 Energy Star
31
The Instructions Manual
Software
Using The Smart Panel to Calibrate The Screen
Select the icon
on the desktop to launch the Calibration program and
the following panels will appear.
Select Tool, then select 4 Point Calibration. A red flashing X will appear
in the lower-left corner of the screen, then tap or click the X and hold it
until the green X appears. Follow the same steps to finish the other three
red X calibration.
Note: Make sure to calibrate the screen before your first screen rotation.
The First Installation
The following panel will appear if the user installs the software setup
procedure oneself. Users have to install Microsoft .NET Framework before
the first installation of Hot Key & Smart Panel Utilities.
Select “Yes” to install Microsoft .NET Framework immediately or users can
download Microsoft .NET Framework from Microsoft website later.
32
CHAPTER 4 – Specifications & Software
Using The Front Panel Hot Key Utility
Please refer to the following descriptions for each of all 5 hot keys.
Key T :
A dedicated button to enable / disable Barcode function.
33
The Instructions Manual
Key 1:
The defaulted key function is to launch “Windows Task Manager”
application to manage your applications.
The user is able to redefine the key function.
Key 2:
The defaulted key function is to launch “Cap Sound” application to
enable / disable audio recorder.
The user is able to redefine the key function.
34
CHAPTER 4 – Specifications & Software
Key 3:
The defaulted key function is to launch “Windows Media Player”
application to play music or video.
The user is able to redefine the key function.
Key 4:
Press Key 4 to launch submenu function. The “submenu bar”
as the following will be displayed on the desktop.
35
The Instructions Manual
The statuses of the communication capacities will be displayed on the
submenu bar. Key 1, Key 2, Key 3 and Key 4 are endowed with different
functions when the “submenu bar” was triggered.
Please refer to the following descriptions.
Click WiFi icon or press Key 1 to enable / disable the wireless function.
Switch
Click Bluetooth icon or press Key 2 to enable / disable the bluetooth
function.
Switch
36
CHAPTER 4 – Specifications & Software
Click 3G i con or press Key 3 to enable / disable the 3G function.
Switch
Click GPS i con or press Key 4 to enable / disable the GPS function.
Switch
Click OK icon or wait for 3 seconds to Exit.
Define the Functions for Hot Key Utility
1.
Right-click the “Hot Key” icon in the Windows system tray, then select “Define”
to launch the “User Defined Function” application.
37
The Instructions Manual
2.
Type the correct path of the APP or browse the Folder icon to select your APP
Click here select APP
Make sure the defined APP path is correct.
Your APP path
Click “Save” to confirm your selections.
38
CHAPTER 4 – Specifications & Software
Using The Bluetooth Utility:
BlueSoleil allows the computer to wirelessly access a variety of Bluetooth
enabled digital devices, such as cameras, mobile phones, headsets, printers,
and GPS receivers. Users can also create networks and exchange data with
other Bluetooth enabled computers or PDAs.
First : Turn on your Bluetooth device
1.
To launch the Blue Tooth icon (Red
circle) from the desktop.
2.
Select “Show Bluetooth Devices”.
39
The Instructions Manual
3.
Select “add device“ (Red Circle).
Some blue tooth devices were found and
listed out.
4.
Select “Blue tooth Keyboard“ or
5.
Type the number or password for
other devices.
configuration.
6.
Selected Blue tooth device has
been successfully configured with
the computer.
40
CHAPTER 4 – Specifications & Software
Making a 3.5G Connection and Disconnection
Select Start Menu -> All Programs -> Sync manager -> Connection Manager
Utility -> Connection Manager to launch the program. The system will launch
the program automatically after booting the computer.
Connection
Select  to make a connection.
Connected the internet
41
The Instructions Manual
Disconnection
1. Select  to terminate the connection.
2. Select  to confirm the disconnection.
Using the CMOS Camera
1.
Select “ AMCAP” ICON
2.
Select “device“ and “USB Video
device“. The first bar for the front
camera and the second bar for the
rear camera.
42
CHAPTER 4 – Specifications & Software
Using the RFID
1.
Select “Holy Stone” ICON
2.
Type “3” for the Select COM
Port.
3.
Put your RFID card close to the
RFID Sensor.
The message “TAG = MIFARE 1K”
will be displayed, if the computer
accepts the RFID card.
43
The Instructions Manual
Using the Mini Smart Card
1.
Select the “Mini Smart” icon.
2.
Select the “ PC/SC ” button.
3.
Insert the Mini Smart Card
into the slot and press the
“Connect to Card” button.
44
CHAPTER 4 – Specifications & Software
4.
The detail information will
be displayed on the Result
dialog box.
Using the Bar code Scanner
1.
Select the “EA15 Demo” icon.
2.
Select the “ EAISDemo”.
45
The Instructions Manual
3.
Press the “Connect”
button and the status
information will be
displayed out.
4.
Press the “T” Hot Key
to enable the Bar Code
Scanner.
5.
Scan the Bar Code Stick and the detail information will be displayed on the
“Decoded Label” dialog box.
46
CHAPTER 4 – Specifications & Software
Using the MSR
1.
Select the “NotePad” icon.
2.
Insert the Cash Card or ATM
Card into the MSR slot.
3.
The information will be
displayed on the screen.
Using The GPS
Please disable the Bar Code Scanner and follow the steps below.
1.
To Confirmed the GPS
COM port number at the
device manager.
(Path: start / Control pad / System / Hardware / Device Manager / COM & LTP)
47
The Instructions Manual
2.
Select the “U-Center 6.01”
ICON.
48
3.
Select COM3.
4.
Select the Baud Rate.
5.
Receive the Satellite Channel.
CHAPTER 4 – Specifications & Software
Using the Brightness Adjustment
The user can adjust the screen brightness with fingers while the computer
gets into the O.S. status. On the screen, to slide fingers from left to right or
right to left to change the screen brightness.
49
The Instructions Manual
Using the Fingerprint Function
Click the delta icon in the Windows system tray, then
Click Fingerprint icon (BioExcess)
50
CHAPTER 4 – Specifications & Software
Select “ Initial Wizard “ bar
Click
Next
51
The Instructions Manual
To swipe your finger on the fingerprint device for the enrollment.
Repeat 2 times.
52

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Producer                        : PDF-XChange 4.0.163.0 [ABBYY] (Windows XP Home Edition Service Pack 3 (Build 2600))
Create Date                     : 2013:05:31 10:46:17+08:00
Page Count                      : 60
EXIF Metadata provided by EXIF.tools
FCC ID Filing: XZOIC-8

Navigation menu