Nova LTE-M & NB-IoT XPY2AGQN4NNN 8595A-2AGQN4NNN Additionally, all Nova modems are compliant with FCC Part 15 Class B . Hologram Nova Global IoT Cellular USB Modem Data Sheet and Hardware Reference Issue 04 (2018-09-07) Page: 15 Modification Statement
File Info : application/pdf, 15 Pages, 388.85KB
Document DocumentData Sheet and Hardware Reference Hologram Nova Global IoT Cellular USB Modem V1.4 Issue: 04 Date: 2018-09-07 Hologram Nova Global IoT Cellular USB Modem Data Sheet and Hardware Reference Nova Data Sheet and Hardware Reference TABLE OF CONTENTS 1. System Block Diagrams a. Nova 2. Input/Output Characteristics a. USB b. UART 3. Technical Specifications a. Absolute Maximum Ratings (Power Inputs) b. Operating Conditions c. Radio Specifications d. Mechanical Dimensions e. LEDs f. Antennas 4. Bill of Materials (BOM) 5. Regulatory information a. Carrier Specific Certifications b. Export Control Classification Number c. RoHS Compliance d. Interference Statement e. FCC & IC Compliance f. Modification Statement g. End Product Labeling Requirements Issue 04 (2018-09-07) Page: 2 System Block Diagrams Block diagram of the Nova board: Hologram Nova Global IoT Cellular USB Modem Data Sheet and Hardware Reference Issue 04 (2018-09-07) Page: 3 Hologram Nova Global IoT Cellular USB Modem Data Sheet and Hardware Reference Input/Output Characteristics USB The Hologram Nova is designed to provide easy access to the u-blox SARA-U201 and SARA-R410-02B USB interface. SARA series modules include a high-speed USB 2.0 compliant interface with maximum 480 Mb/s data rate. The module itself acts as a USB device and can be connected to any USB host. The USB is the suitable interface for transferring high speed data between SARA-U2 series and a host processor, available for AT commands. The USB_D+ / USB_D- lines carry the USB serial data and signaling. The USB interface is automatically enabled by an external valid USB VBUS supply voltage (5.0 V typical) applied on the VUSB_DET pin. For additional details, please see the following datasheets: u-blox SARA-U201 datasheet u-blox SARA-R4 Series datasheet Issue 04 (2018-09-07) Page: 4 Hologram Nova Global IoT Cellular USB Modem Data Sheet and Hardware Reference UART At Hologram, we believe in providing an open platform for developers to build hardware. To support this mission, the Nova exposes the u-blox modem's UART interface as solderable pads on the top half of the board. For more advanced hardware devlopment, this provides direct access to the u-blox modem which runs at 1.8V Note: USE UART PADS AT YOUR OWN RISK. Pads are directly connected to the u-blox modem so using these I/O or improperly handling the board runs the risk of damaging the u-blox modem. Additionally, we do not officially provide support this interface. Issue 04 (2018-09-07) Page: 5 Hologram Nova Global IoT Cellular USB Modem Data Sheet and Hardware Reference Technical Specifications Absolute Maximum Ratings (Power Inputs) Stressing the device above one or more of the ratings listed in the Absolute Maximum Rating section may cause permanent damage. These are stress ratings only. Operating the device at these or at any conditions other than those specified in the Operating Conditions should be avoided. Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability. Symbol VCC, USB 5V USB D+/D- line UBLOX_RTS UBLOX_CTS UBLOX_TXD UBLOX_RXD UBLOX_RESET_N GPIO2 GPIO3 GPIO4 Description Input DC voltage at VCC pins Input DC voltage at USB_D+/D- pins Input DC voltage at u-blox digital interface pins Input DC voltage at u-blox RESET_N pin Input DC voltage at u-blox GPIO pins Min. -0.30 -1.00 -0.30 -0.15 -0.30 Max. Unit 5.50 V 5.35 V 3.60 V 2.10 V 3.60 V For power draw characteristics under certain cellular conditions, please view respective u-blox datasheets. Operating Conditions The Hologram Nova is designed to operate within temperatures between -45°C to 85°C. It is not designed to withstand material contact with moisture or any other conductors, aside from intended use of the USB. The Hologram Nova may be installed into appropriate enclosures that can protect the device from heat, cold, moisture, and humidity for Industrial use. If handling the Nova circuit board directly, please do so in an ESD-safe environment and wear ESD protection. Issue 04 (2018-09-07) Page: 6 Hologram Nova Global IoT Cellular USB Modem Data Sheet and Hardware Reference Radio Specifications The Hologram Nova platform features cellular modems which support a global list of 2G, 3G, and LTE Cat-M1/NB-IoT frequencies. Nova 3G/2G (SARA-U201) · 3G Bands: o Americas: Band 5 (850MHz), Band 2 (1900MHz) o Europe/Asia/Africa: Band 8 (900MHz), Band 1 (2100MHz) · 2G Bands o GSM - 850MHz o E-GSM - 900MHz o DCS - 1800 MHz o PCS - 1900 MHz Nova LTE-M & NB-IoT (SARA-R410M-02B) · LTE Cat-M1/N1 Bands: o LTE FDD: 1, 2, 3, 4, 5, 8, 12, 13, 17, 18, 19, 20, 25, 26, 28 Issue 04 (2018-09-07) Page: 7 Hologram Nova Global IoT Cellular USB Modem Data Sheet and Hardware Reference Mechanical Dimensions The Hologram Nova board without an enclosure is: · Length: 61.58 millimeters · Width: 19.4 millimeters · Height: 5.84 millimeters (maximum height) Below are views of the Hologram from the top and side. Top View: Side View: Issue 04 (2018-09-07) Page: 8 Hologram Nova Global IoT Cellular USB Modem Data Sheet and Hardware Reference LEDs The Nova has two clear LEDs for providing power and connectivity feedback. A power LED that represents whether the modem is on or off, and a network LED that indicates the current network status. Note: Nova LTE-M & NB-IoT modem and Nova 3G/2G modem have same placement of LED color indicators but opposite use for power/network indication. Please use below table for reference. MODEL Nova 3G/2G Nova LTE-M & NB-IoT POWER LED Red Blue NETWORK LED Blue Red · Power LED status indicator (Red 3G/2G, Blue LTE-M & NB-IoT) o On: USB 5V is connected and the Nova is powered on o Off: USB 5V is not connected and the Nova is not powered on (modem may take up to 30s to boot up and power the LED) · Network LED status indicator (Blue 3G/2G, Red LTE-M & NB-IoT) o On, solid: Nova connected in active data session o On, rapid blink: 3G network detected (3G/2G Nova Only) o On, double blink: 2G network detected (3G/2G Nova Only) o Off: No network detected Make sure antenna is securely connected, positioned to receive cell signal and SIM properly inserted Device can take up to 200s to detect available networks Issue 04 (2018-09-07) Page: 9 Hologram Nova Global IoT Cellular USB Modem Data Sheet and Hardware Reference Antennas The Nova is made for ultimate flexibility and this extends to available antennas. Each model's included antenna characteristics are listed below: Nova 3G/2G (SARA-U201) · Black, flexible antenna (Sinbon A9702472) o Size: 37x7x1mm o Weight: <1g o Connector: U.FL o Mounting: Adhesive 3M tape o Temperature: -40C - +85C Nova LTE-M & NB-IoT (SARA-R410) · Black, flexible antenna (Pulse PN W3907B0100) o Size: 111.70x20.4x1mm o Weight: <1g o Connector: U.FL o Mounting: Adhesive 3M tape o Temperature: -40C - +85C The Nova can also be used with additional antennas. If you'd like to use the Nova with an antenna which has an SMA connector, you need to purchase a UFL - SMA adapter. Issue 04 (2018-09-07) Page: 10 Bill of Materials Hologram Nova Global IoT Cellular USB Modem Data Sheet and Hardware Reference DESIGNATOR ANT_UFL QUANTITY 1 MFG Amphenol C2, C6, C48 3 C11 1 C39 1 C34 1 C46 1 C36, C37, C38 3 C41, C42, C43, 5 C44, C45 (U201 Nova Only) C40 1 C47, C49, C50 3 L7 1 L5 1 D1 1 D2 1 D3, D4, D5 3 MURATA SAMSUNG MURATA Murata AVX/ELCO MURATA AVX KEMET AVX Murata Coilcraft VISHAY VISHAY Littlefuse MPN A-1JB GRM155R61C104KA88D CL10A225MQ8NNNC GRM155R71C103KA01D GRM188R60J106ME84D 04025A150JAT2A GRM188R60J226MEA0D 04025A470JAT2A C0402C560J5GACTU F950J337MBAAQ2 BLM18KG121TN1D XFL4020-102MEC VLMB1500-GS08 VLMS1500-GS08 PESD0402-140 Issue 04 (2018-09-07) Page: 11 Hologram Nova Global IoT Cellular USB Modem Data Sheet and Hardware Reference DESIGNATOR L1 QUANTITY 1 MFG YAEGO R13 1 YAEGO R3, R5 2 YAEGO R4, R6, R7, R8 4 YAEGO R1, R2 2 YAEGO R11, R51 2 PANASONIC R12 1 YAEGO R9 1 PANASONIC U16 1 U-BLOX SIM1 1 GLOBAL CONNECTOR TECHNOLOGY U2 1 TI Q1, Q2, Q3, Q4 4 ON Semiconductor J1 1 MOLEX MPN RC0603JR-070RL RC0402FR-071ML RC0402FR-073KL RC0402JR-0710KL RC0402FR-0722RL ERJ-2GEJ104X RC0402FR-07150KL ERJ-2GEJ471X SARA-U260-00S SIM8050-6-0-14-01-A TPS63020DSJ MMBT3904LT1G 480372200 Issue 04 (2018-09-07) Page: 12 Hologram Nova Global IoT Cellular USB Modem Data Sheet and Hardware Reference Regulatory information Carrier Specific Certifications NOVA-U201 (3G/2G): AT&T, T-Mobile, PTCRB, GCF NOVA-R410 (LTE-M & NB-IoT): Verizon ODI, AT&T, T-Mobile (In progress), PTCRB, GCF Verizon Open Development Device #7721 AT&T Network Compatibility Record: 10bkv4QCDm Export Control Classification Number (ECCN) ECCNs are five character alpha-numeric designations used on the Commerce Control List (CCL) to identify dual-use items for export control purposes. An ECCN categorizes items based on the nature of the product, i.e. type of commodity, software, or technology and its respective technical parameters. ECCN for All Nova Modems: 5A992.c RoHS Compliance The Nova modem family complies with the RoHS (Restriction of Hazardous Substances) directive of the European Union, EU Directive 2011/65/EU. Harmonized Tariff Schedule Code (HTS) HTS Code for All Nova Modems: 8517.62.0010 Issue 04 (2018-09-07) Page: 13 Hologram Nova Global IoT Cellular USB Modem Data Sheet and Hardware Reference Interference Statement This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standards. Operation is subject to the following two conditions: (1) This device may not cause harmful interferences, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC & IC Compliance If the modem's antenna is located farther than 20cm from the human body and there are no proximate transmitters, the FCC/IC approvals of the constituent ublox SARA-U201 or SARA-R410-02B can be reused by the end product. Should the modems antenna be mounted closer than 20cm from the human body or if there are proximate transmitters, additional FCC/IC testing may be required for the end product. Nova 3G/2G & Nova LTE-M & NB-IoT modems make use of the underlying u-blox module's FCC & IC identification numbers below. MODEL Nova 3G/2G Nova LTE-M & NB-IoT FCC ID XPY1CGM5NNN XPY2AGQN4NNN IC ID (CERTIFICATION NUMBER) 8595A-1CGM5NNN 8595A-2AGQN4NNN Additionally, all Nova modems are compliant with FCC Part 15 Class B Issue 04 (2018-09-07) Page: 14 Hologram Nova Global IoT Cellular USB Modem Data Sheet and Hardware Reference Modification Statement Hologram has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user's authorization to operate the equipment. End Product Labeling Requirements End products utilizing Nova 3G/2G modems should be labeled with the following information: Device Uses Approved Radio: NOVA-U201 Contains FCC ID: XPY2AGQN4NNN Contains IC: 8595A-1CGM5NNN This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standards. Operation is subject to the following two conditions: (1) This device may not cause harmful interferences, and (2) this device must accept any interference received, including interference that may cause undesired operation. End products utilizing Nova LTE-M &NB-IoT modems should be labeled with the following information: Device Uses Approved Radio: NOVA-R410 Contains FCC ID: XPY2AGQN4NNN Contains IC: 8595A-2AGQN4NNN This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standards. Operation is subject to the following two conditions: (1) This device may not cause harmful interferences, and (2) this device must accept any interference received, including interference that may cause undesired operation. Issue 04 (2018-09-07) Page: 15Microsoft Word 2016