Anker PowerExtend USB 6-Outlet Pod
Charge Fast, Live More
Overview
The Anker PowerExtend USB 6-Outlet Pod provides surge protection and multiple outlets for your electronic devices.
Key Features:
- On/Off Switch / Reset Button: Controls power and can reset the surge protection.
- Surge Protection Light: Indicates the surge protection is active. If off, surge protection is not functioning normally.
- Grounded Light: Indicates the outlet is properly grounded.
- AC Outlet: Standard outlets for plugging in devices.
- USB-A Output: Ports for charging USB devices.
Operation:
- When the switch is turned on, the Surge Protection and Grounded Protection lights will turn blue. The power indicator light will turn white.
- In case of a power overload, the On/Off Switch will automatically cut off the power.
Using Your PowerPort Strip
Connect the power strip to a grounded outlet. Plug your devices into the AC outlets or USB-A ports as needed.
A: Power On
B: Power Off
Safety
- Do not connect the PowerExtend to an ungrounded outlet.
- Do not use with extension cords.
- Do not exceed electrical ratings.
- Use in dry locations and indoors only.
- Install the PowerExtend away from heat-emitting appliances such as radiators.
- Keep children away from the PowerExtend.
Specifications
Feature | Details |
---|---|
AC Input | 125V AC 60Hz 15A |
AC Output | 125V AC 60Hz 15A 1875W |
USB Input | 100V-240V~50/60Hz |
Surge Energy | 900J |
USB-A Output | 5V-3.6A (12W Max Each Port) |
Size | 51 x 51 x 135 mm / 2.0 x 2.0 x 5.3 in |
Cable Length | 6ft/8ft/10 ft (multi-length version) |
Customer Service
Warranty: 18-Month Limited Warranty
Technical Support: Lifetime Technical Support
Contact:
- Email: support@anker.com
- Phone: +1 (800) 988 7973 (Mon - Fri 9:00am - 5:00pm PT)
- Website: anker.com/support
Company Address: Anker Innovations Limited, Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Product Number: A9166
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party:
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1-800-988-7973
IC Statement
This device complies with Industry Canada license - ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.