Fixed, Manual Reset of device quota reset policy. V6.G6.02 (2019-01-21) Thai translation for Wrap Jam Error(M2-1317) is updated. UI Slowness issue is fixed. V6.G6.02.02. 050715 (2019-05-30) Fixed, XSS weak point of Samsung models. Fixed, slow UI and slow copy feature. Fixed, IPv6 manual address for fdxx as prefix. Fixed, S5-3116 if no hardware ...
Firmware Release Note
Model: X7600 Series
Date: 18-Dec-2019
V6.H6.00 FW addresses total of 7 issues. - Major Changes 1) Removed the functionality to print the barcode. 2) Fixed, Custom size 450X298mm printing in duplex mode. 3) Fixed, inner finisher folding and not stapling the last page when printing odd number of copies issue. 4) Fixed, the upper finisher issue for A3 duplex printing. 5) Fixed, the network print issue after soft reboot. 6) For Gov models, the A4 Demo page is changed to add more information. 7) Fixed, the SNMP OID status for HCF tray to display it on the panel.
Please upgrade the FW with V6.H6.00 if any one of the mentioned problems need to be resolved.
Version Category Problem Problem Problem
V6.H6.00 Problem (2019-12-18)
Problem
Problem Problem
TSP ID
Division
Change Description
KOREA Removed the functionality to print the barcode.
KOREA Fixed, the SNMP OID status for HCF tray to display it on the panel.
KOREA Fixed, the network print issue after soft reboot.
KOREA Fixed, Custom size 450X298mm printing in duplex mode.
KOREA
Fixed, inner finisher folding and not stapling the last page when printing odd number of copies issue.
KOREA Fixed, the upper finisher issue for A3 duplex printing.
KOREA For Gov models, the A4 Demo page is changed to add more information.
Software Component Versions System Firmware Main FW Version XOA Web UP Engine Firmware File System Version SCB(Scan,Fax) Version Boot Rom Version UI Firmware ADF Firmware Tray1 Tray2 Tray3 Tray4 finisher(Inner) Version finisher(3K) Version Booklet Version Hole Punch Version PCL5CE PCLXL PS/PDF/XPS
Image Quality tables EP Fuser Toner TR Scan Control Print CMS Copy CMS Scan CMS Print IEM Copy IEM
V6.H6.00 V11.01.10.00_09-20-2019 1.4.33 1.17.34_(20171218171009) V2.02.67 04-11-2019 FS_V15.02.06.23.15 V3.00.05.05 03-25-2019 V15.11.00.00.07-09-18-2019 V5.18.50.12.00_19040115 00.03.60 V2.02.67 V2.02.67 V02.21.00 V02.21.00 V01.56 V02.67 V02.33 V04.06 V8.22_170906 V11.00.90 V6.21.01.62.02.03_170415
V4.01 V5.74 V3.25 V1.64 V0.50 V13.03.10.10 V.13.02.0818 V2.4 V0.36 V6.50.1219
Update dependency - None
Solution Compatibility Table
( X7600 : V6.H6.00 )
Category
Solution Name
Solution Version
CloudConnectorCore
2.50.008
DocumentWorkflowCore
2.50.007
BCPS PrintingSecurityCore SecureLoginCore
2.50.009 2.50.006
UsageTrackerCore
2.50.007
XOA-WEB Enabler
2.00.003
Autostore
1.0.0 ( Server : 7.00.3.0 (DRS:7.0.1.16, APD:7.0.3.26))
Drivve Image
1.5.43 ( Server : 5.1.546)
Drivve Print
1.1.30 ( Server : 3.1.100)
Equitrac
1.1.0.135 ( Server : 5.2.21.8778)
Geniusbytes MyMFP
2.19.6.2 ( Server : 2.19.3)
NDDigital n-Access
2.1.3 ( Server : NDDigital n-Billing 4.9)
NDDigital n-Collector
2.2.4 ( Server : NDDigital n-Billing 4.9)
NDDigital n-Releaser
2.1.4 ( Server : NDDigital n-Billing 4.9)
Omtool AccuRoute ISV-XOA-E PaperCut
1.0.0.689 ( Server : 2013(Build 5)) 1.1.0 ( Server : 16.4 (build 38954))
PrintFleet Cloud Embedded DCA1.1.249 ( Server : 3.6)
Ringdale FollowMe
1.1.2.9 ( Server : 6.1.0.103)
SafeCom
010.24.23 ( Server : 10.520.10.35)
SafeQ Embedded Terminal 1.0.0 ( Server : C.0.18.002)
Scanner Vision
1.0.6 ( Server : 6.2.0.270)
Scanshare Essentials
1.5.15.167 ( Server : 4.0.5)
Ubiquitech Easy & VDMS 1.5.3-rel3 ( Server : 5.0.0-rel [ca91b])
e-Paper Sentinel
5.0.7
Prism ScanPathTM
1.0.49 ( Server : 2.5.0.29)
SmartUX Nuance unified client
1.0.0.606 ( Server : 5.7.28.6490(CAS:5.7.28.6490, APD : 7.0.4.0))
PrinterOn PrinterOn Branded Agent
2.03.003
V6.H6.00
Verified F/W Version
V6.D6.29 V6.E6.05.02.071317
V6.A2.54 V6.A2.54 V6.D6.29.03.120609 V6.G6.02.02.050715 V6.D6.07 V6.D6.07 V6.D6.07 V6.D6.07 V6.F6.01 V6.E6.05.02.071317 V6.D6.07 V6.F6.04.03.101119 V6.D6.29.03.120609 V6.D6.07 V6.D6.07 V6.D6.29.03.120609 V6.D6.07 V6.A2.18
V6.F6.04.03.101119
A solution has been verified and MUST be compatible with the releasing F/W version.
Previously the supported solutions have been tested and verified with the version specified in the "Verified F/W version" row in the table. The required test has been conducted on this FW version to ensure the backward compatibility with "Verified F/W version".
FW Release History Version Category Problem Problem Problem Problem Problem Problem Problem
V6.G6.02.02. Problem 050715 Problem
(2019-05-30) Problem Problem Problem Problem Problem Problem Problem Problem
V6.G6.02 Problem (2019-01-21) Problem
Problem
Problem
V6.F6.04.03. 101119
(2018-11-01)
BTSP ID
Division
Change Description
KOREA Fixed, XSS weak point of Samsung models.
KOREA Fixed, slow UI and slow copy feature.
KOREA Fixed, IPv6 manual address for fdxx as prefix.
KOREA Fixed, S5-3116 if no hardware failure. KOREA Implementation of new requirement to enhance the SWS security.
KOREA Added more flexible configuration to control device quota.
KOREA Fixed the IDCopy parameter getting reversed while submitting of job. KOREA Fixed, to print all documents in queue from BCPS when documents come from MacOS.
KOREA Fixed, MX7 WTB drive motor's torque margin.
KOREA Fixed, the fax not working while in power save mode. KOREA Fixed, conflict between Front Back in Cover and Fold Staple in Booklet.
KOREA Fixed the issue of device going to home screen after login using GeniusMFP solution.
KOREA Fixed, Manual Reset of device quota reset policy. KOREA Fixed, android security issue for password field.
KOREA Fixed the print output order.
KOREA Fixed, wrap jam information in fuser eeprom.
KOREA Fixed, inner finisher jam issue with punch option.
KOREA Thai translation for Wrap Jam Error(M2-1317) is updated.
KOREA UI Slowness issue is fixed.
KOREA
Fixed the issue that image log not sent to Printing Security Solution Server when fax images recieved through Line2
KOREA Improved Fusing mechanism for Fuser wrap JAM
V6.F6.04.03. Problem 101119
(2018-11-01) Problem Problem Problem Problem
Problem
SIE174695
SIP68753 TP1740O0
Problem
V6.F6.04.02. Problem
SIP68582
072419 (2018-08-01)
Requirement
Requirement
Problem Problem
SIE173360
Problem
TP1790KD
Problem
-
Problem
-
Problem
TP17A06W
V6.F6.04.01. Problem 041619
(2018-05-04) Problem
Problem
SIP65410 SIP65701
Problem
SIP64544
Problem
SIE154757 SIE156425
Requirement SIE157066
Problem
-
Problem
-
V6.F6.04 Problem
-
(2018-02-12)
Problem
-
Problem V6.F6.01 (2017-10-27) Problem
TP17801L
Requirement -
Problem
TP1720J901
Problem
TP173078
Problem
Problem V6.E6.09.04.
090410 Problem (2017-09-20)
Problem
TP1720K8 TP1740C3
TP1740O0
DEV DEV DEV EMEA DEV EMEA
DEV AMS DEV DEV EMEA SQE SEAU
DEV
DEV
SEA
SEG SEBN SEG
SEAU
SAU EMEA SEG EMEA KOR
SEG KOR SEBN
SEF KOR
SEUK
DEV SECA SEA
SEUK
Fixed Firmware update failure or blank image scanning could be happened when Host Name contains "VE" Fixed the issue of WSD Print installation with Win10 (1703/1709/1803) Fixed the Google Address Book stay signin issue and showing previous user contacts Fixed the issue of Box app Athentication Fixed MFP slow down issue with mDNS
S1-2452 Error issue was fixed by improving the DB recovery logic
When SNMP Community Web Service is called via HPSM application to add/edit/delete the community names, a side effect is observed that SNMPv3 is getting disabled. This side effect is fixed Fixed SMB 2/3 job failed issue due to excessive permissions requested SNI(Server Name Indication) is added by new requirement for Google Cloud Print servers when SSL enabled.
New feature implementation for configurable 'SSL/TLS' protocols and ciphers option. Security level configuration can be done according to user requirement from SWS. Fixed booklet fold & staple option is not working when printing mulple copies from stored job The Punch option doesn't take effect after changed it from 2Punch to 4Punch under Box->Print>print options. This is fixed 'Error 403' caused when connecting to Google Addressbook due to Google policy changes is fixed.
The intermittent stoppage caused when creating Hibernation Image when https is enabled is fixed.
Inaccurate range value associated with Scan background density from Nuance Unified client compatibility test is fixed.
The issue that file stored at Box App is not intermittently deleted at the device where HDD Image Overwrite is enabled is fixed.
The issue that Ext.Phone setting in service mode revert back to initialized value when dual Fax card is installed and power cycled is fixed. Login speed has improved when using Nuance Unified client. The issue that certificate related setting value is reset as default after changed F/W version including updated Send App is installed is fixed.
The issue that fuser detection fails due to intermittent timing in case that a user sends a job when the device enters sleep is fixed.
The issue that email is not delivered under ScantoEmail in case that special characters(ex) ',') are included in sender's user name is fixed. New certificate of Google Cloud server is applied. Copy sharpness value change failure on FAP is fixed. Special characters except for '<' and '>' are now allowed as LDAP server access password.
Change to define start and end time when enabling performance optimization feature.
Fixed an issue of unintended color being printed because of wrong processing of 1x1 size pattern in PCL5 job for color printers. Fixed an issue of black text printed as white in specific application for color printers. Fixed an issue of the reset database menu being displayed at booting phase by intermittent corruption of audit database index.
LUI default screen is changed to Kiosk home screen when FDI and Smart Printing Kiosk app are used together. Allow Korean characters in the Scan to SMB path.
1 sheet booklet and folding printing job, which can have 1~4 pages original document, is able to fold with Heavyweight media. - X4300, K4350 : Thick, Heavyweight, Thin Glossy - X7600, K7600 : Thick, Heavyweight, ExtraHeavyweight1, ExtrayHeavyweight2 - Driver : UPD 3.00.13.00:03
Fixed an issue of iterated login and logout when performing NFC authentication on device, WIFI/NFC module(SL-NEW001X) installed, with the latest cellular phones such as Galaxy S8. Fixed an issue of scanned images being right shifted when scanning MSO(Mixed Size Original) Fixed an issue of slow booting or WIFI disconnection when power cycled by soft power button on UI when WIFI/Bluetooth (BLE, Bluetooth Low Energy) module(SL-NWE002X) installed.
Improve DB(Database) error recovery routine for damaged record only instead of DB initialization.
V6.E6.09.04. 090410
(2017-09-20)
Problem
TP1750JO
Problem
TP176005
Problem
TP1750OA
Problem
TP177025
Requirement -
Problem V6.E6.09 (2017-09-20)
Problem
TP17607P TP17607P
Problem
TP16C0JD
Requirement TP1710KL Requirement TP1730AG
Problem
MKT
Problem
Problem
Problem
V6.E6.05.02. Problem 071317
(2017-07-26) Problem
TP17309T TP1710JX TP1670LC
-
TP1740DR
Problem
TP1730IK
Problem
TP1750CC
Problem Problem Problem
TP1750I4 TP17600R TP17607P
Requirement TP1670QW
Problem
TP16802X
Requirement TP16A0SB
Problem
TP16B0KD
Problem
TP16C0JQ
Problem Problem
TP16C003 TP171017
Requirement TP16909R
Problem
TP16C0EG
V6.E6.05.01.
042409 (2017-05-08)
Problem
-
Problem Problem
TP1710MR TP1720G8
SEAU SEI SEG SEHK DEV SEG SEG SEIL SEASA SEPOL SEA SEA SEG SEA DEV SEUK
SEGR
SEG SEA SEG SEG SEA
SEA SEUK SEG
SEA
SEG SEA SEBN SECH
DEV
SEA SEG
Fixed an issue of a scan job being stopped when adding a document while the last document comes out during the ADF scanning.
Fixed an issue of the memory clear button in the service menu not being activated after power on but intermittent exception occurred in WSD initialization. Allow compact PDF option in XOA-E API for ISV solutions. Fixed an issue of a Fax Rx job pending when all received pages can not be decoded by corrupted data. The Blue Angel 2017 ready. Fixed an issue of not being able to use a device as MSOK errors occur intermittently under certain conditions while enabling HDD encryption function and using the device.
Fixed an issue of F/W update failure in the certain F/W version because of boot memory space shortage(Refer to 2017_CMFP-012_guide_for_FW_update_error_61-1H05).
Fixed an issue that the destination of Scan Widget was displayed as None after the Scan Widget was terminated abnormally. A new API was provided to hide buttons on the navigation bar of UI such as back/home button. Remove destination email address in the PDF file generated from Scan to email. Fixed a problem where the Hole punch menu was not visible in the Copy App when Hole punch unit is installed later after installing the Finisher.
Fixed an issue where color copier with booklet finisher got outbin full while printing B/W booklet job, sometimes the job was not resumed even after the outputs were removed. Fixed an issue where one of continous printing jobs was not printed intermittently due to Added a new settings which specifies a default folders of Box App. * Box App > Action Overflow(3 dot button) > Box Settigns > Default Display Folder
Fixed an issue that sometimes a job was not canceled and remained cancelling state until rebooting.
Fixed an issue that when a large number of print jobs were saved in the Box, some of jobs were not printed by Print & Delete function for all jobs.
Fixed an issue when a double-sided job was printed from DCF with half-speed feeding by paper weight such as Thick, Extra Heavyweight paper type, sometimes double-sided pages were printed with unexpected order.
Fixed an issue of stripped patterns on the part of image of PCL5 job which consists of mono data and color macro data. Fixed an issue where the finishing option was cleared to default when printing a saved booklet job in the Box app with changing 'copies' option. Fixed an issue where finishing option is cleared to default when the job was rescheduled by paper mismatch/empty. Fixed system failure case by intermittent MSOK error when HDD encryption is enabled.
Added Bates Numbering feature to the copy app. Prefix, Suffix, and Number of Digit (up to 9 digits) settings are added to the Copy > More > Stamp menu
Fixed an issue of setting value reset when program was executed after setting a booklet option in a copy app and creating the program. Added a Jam Count Rreset feature to the service mode. Fixed an issue where the separator page was stapled together with the original printout when Populate recipient name in front of "From" email address at the Scan to email function. ex) As-Is : From : <sghj@ghj.com> To-Be : From : "ghjeong" <sghj@ghj.com> Fix an intermittent issue that partialy damaged PDF file is generated by color scanning with Fixed not to staple every single page for multiple printing of one page.
Supported a special character '\' in the LDAP search option.
Added a function to automatically fill user email address registered in the job account (JAC) in recipients when logging in and running Scan & Send App.
Even an user changes filename format of Scan&Send > Scan Options > Filename, real date & time will be used if it still has Dates&Time format, such as DDMMYY. ex) As-Is : test_DDMMYY saved as "test_DDMMYY" To-Be : test_DDMMYY will save as "test_100517"
Switch to fax sending job by deleting email address when entering fax numbers if email was already put as a recipient at the Scan & Send app. Fixed an issue that remaining error handling videos were not displayed when one of the simultaneous error handling videos was closed.
Problem
-
Problem
-
Requirement TP1660L0
Problem
TP1730EW
Problem
Problem
Problem
Problem Problem Problem Problem V6.E6.05 (2017-04-11) Problem
Problem Problem Problem
Problem
TP1710GG
-
TP1730KE
TP16C0KM TP1710BP TP16707Q TP172037 -
TP1670DJ
Problem
TP1670LQ
Requirement -
Problem
TP1670UW
Problem
TP1680HV
Problem
TP1690AR
Problem V6.D6.30.04. Problem
011308 Problem (2017-01-23) Problem
Problem
Problem
Problem
Problem
TP16A0B5 TP16B017 TP1680JS TP16B0I7 TP16B0LX TP16B0ON TP16B0SM
Problem
TP1690PR
Problem
TP16A0OQ
Requirement -
Requirement -
Problem Problem
TP1670VH -
Problem
-
Problem
Q1611_0054
Problem
TP1690W6
Problem
TP16B0CT
Problem
TP16A0NJ
Problem
-
Problem Problem
Requirement
Requirement Problem
TP166162 TP16B027 TP1630R0 VO-1506000610 VO-1507000139 -
Requirement -
Problem
-
Problem
-
DEV
DEV SEUK
SEG
SEBN
DEV
KOREA
SEAU DEV KOREA DEV SEA SEDA SEASA KOREA SEF DEV
SEA
SEA
SEUK SEI SENA
SEA
DEV SEA SEG SEBN SECA SEPOL SEI SEF
SEG
SEA DEV KOREA SEG DEV DEV KOREA SEF SEAU SEBN KOREA SEDA KOREA
Fixed the black and white scan counts to be increased for scanning job with setting the color mode to the mono.
Fixed not to print when user quota was exceeded while copying and printing simultaneously. Added a function to select and take address directory from LDAP. Fixed to select an item from LDAP result when Server tab is set as default at Scan & Send app's address directory function.
Fixed an issue that when a PDF document created by a specific PDF generation tool was printed directly from USB, the output of the character spacing widened or an error occurred so that the output was not printed.
Improve double-sided printing speed of Executive paper size.
Fix an error in PDF direct printing by abnormal font data included in the PDF file which is generated by specific PDF creator application.
Fixed an issue of filtering an e-mail as junk mail on Gmail server if the default message was used Fixed an issue of displaying devices with the same MAC address at Fleet Admin Pro's device list Fixed an issue of intermittent fusing defect at thin/plain/recycled/thick B4 media and A3/ledger Fixed an issue of intermittent finisher jam(H2-7928, H2-7303) when switching an engine mode
Fixed an issue of initializing Job accounting setup info. created at FleetAdminPro when rebooting the device at SWS or FleetAdminPro.
Fixed an issue of intermittent disappearance of PC list by DB corruption when using Scan to PC. Fixed an issue of unworked SFE behaviors when applying SFE27, SFE54 setup at issued Fixed an issue of admin password change as default when enabling SFE 019 function at issued Fix an issue that destination information disappears at program execution after address book import and device setting backup (cloning) when using address stored in Adress book to register destination of program.
Allow mixed size to be default for original size value in the Copy / Send App, and keep the mixed size setting value when creating a program. Fax paper source tray setting is added to SWS. Add " [, ], ^" to the folder name input function at Scan to SMB feature. Add Umlaut charset to the folder name input function at Scan to SMB feature.
Fix issues at Air print - Correct a problem where the Duplex option didn't work at URF mode. - Fix an issue where portrait and landscape alternate when printing the same document
intermittently. Improve G3 fax transmission / reception quality and retry job protocol in VoIP environment. Fix a problem where the machine reboots when using small paper that is not supported by DSDF. Use a temporary file name while scaning and saving the file, and rename it after the saving is Correct the problem displayed in the error report when the 5th paper tray is open. Fix an issue where JAC enable / disable do not work by job type via Fleet Admin Pro. Fix a problem that causes the device to freeze when the scanned image is skewed from the Fix a problem that cause performance degradation when using counter widget. Fix an issue where the total sent page is incorrectly displayed in the fax sent report when Fix machine stop when setting the Compact PDF option and changing color setting to Mono in Easy setting during scan.
Correct the problem that certain SFE functions are turned off after HDD recovery. Add HDD defect check function in HDD recovery mode screen. Improve fax widget button size and space between buttons for user convenience. Fix the problem where scan data transfer is slowed down for a sync problem when there are a lot Fix a false alarm which misunderstands that IP conflict occures from ARP protocol cache handle Fix the device stop when setting double-sided, 400% enlarge option in copy job. Fix the problem where the device is slowed down when ACR and TRC jobs are impropely Fixed several bouygues telecom issues. Fixed the Searcheable PDF not being generated when a certain complex pattern is recognized Fixed the FR carriage hitting the frame when scanning 432mm media on the platten. Fixed the error page not being printed abnormally in the solution environment's printing case. Fixed the issue of a printed page being intermittently missing when DCF/HCF paper is empty Fixed the issue of quota not being reset at times when the device goes into the sleep mode at the
SEA SECA SEG
Developed a new app for full build job support ( The app will be released in the app center next Regualr FW release officially )
DEV DEV DEV DEV DEV
Developed a new Smart Scan app ( The app will be released in the app center next Regualr FW Fixed the Schedule Image Overwrite automatically changing from on to off when powering the Applied a new CMS function for print image quality improvement. Fixed idle jam count duplication on the error report in ADF jam cases. Improved screen transition speed between tabs on UI OOB app.
V6.D6.29.03. 120609
(2016-12-08)
Requirement TP164027
Requirement TP1640FF
Requirement TP1650OK
Requirement -
V6.D6.29.03. Requirement TP165011
120609 Requirement TP1660JA
(2016-12-08) Problem
TP16611L
Problem
TP16610X
Requirement -
Problem
TP1670O8
Problem
TP168030
Problem
TP1680K1
Problem
TP1670IC
Problem
TP168100
Problem
-
Requirement -
Problem
TP1680P0
Problem
TP169064
Problem
TP1680JH TP1670W4
Problem
TP1680V3
Requirement TP1690AQ
Problem Problem Problem
TP1690MM TP1640A0 TP16A020
Problem
TP16A0FH
Requirement
Fixed issue
Fixed issue Requirement Fixed issue Fixed issue Fixed issue Fixed issue Fixed issue
SR-1508000118 VO-1508000350 TS-1512000029 TP1640UT TP1640K5 TP16500E TP1660HG TP1650R8 TP1660GU TP1660NE
Requirement TP1650IT
Requirement
V6.D6.29.02. 102513
Fixed issue
(2016-10-31) Fixed issue
Fixed issue
Fixed issue
Fixed issue
Requirement
Fixed issue
Requirement
Requirement
TP1650PP TP1660VG TP166162 TP16703Z TP167054 TP16701V TP1630TE TP167097 TP1670DA TP1670PP
Fixed issue TP16601Y
Fixed issue TP16502A
Fixed issue Fixed issue Fixed issue Fixed issue
Requirement
TP1670CF TP1680J3 TP16706H TP1680F1 VO-1509000191 SR-1507000561
Requirement TP1650L8
Requirement
SR-1507000568
SEA SEA SEA KOREA SEG SEA SEUK SEBN SEF SEA SEA SEIL KOREA SENA KOREA DEV SEA SENA
SEAU
SENA SECA SENA SEAU SEUK KOREA
Modified the LDAP contact usernames to display either surname or given name. Added a default contact selection feature between LDAP and local contacts in the Send app. Added SSO support to allow LDAP search using Kerberos ID/PW. Added ITB band generation adjustment feature in the service mode to prevent blade damages Added the Borderless printing feature. (SFE56) Added buckle adjustment feature in the service mode. Fixed the intermittently changing home screen setting issue with wifi enabled. Fixed the issue of Tray5 info not showing on the supply report. Added a new feature for the x-ray print mode for x-ray image improvement. Fixed the VNC connection issue when using a password with a certain character. Fixed the intermittent booting issue after a FW update fail. Fixed the issue of VNC setting menu not showing correctly in Hebrew. Fixed remaining roller counts showing as negative numbers in the Counthru environment. Fixed Swedish punch not working in a print job. Fixed imaging unit or toner cartridge being recognized as uninstalled at times. Added a P-Knox security package function. Fixed job stopping at times when printing using a driver with a 3-hole punch option selected. Fixed the printing error when using remote pull printing in the Printing Security Core solution.
Fixed fax reception stopping with an invalid caller ID coming through.
Fixed intermittent jams when printing on Extra heavy weight2 media in duplex. Added Letter/Legal MSO fax reception functionality. When selecting fixed the menu display revert Swedish or Hungarian language, the device storage When entering D or d after connecting external keyboard to USB, input value is not displayed When pushing start button before From/To values of send app are prefilled, send job is not SFE feature setting value changes to default from time to time.
SEA
The total user accounts increased from 500 to 2000.
SEAU
SEAU SEG KOREA SEG SEUK SEA SESA KOREA KOREA SEA SEDA SEA KOREA SEA SEF SEBN KOREA KOREA SEUK
KOREA
SECA SECA SECH KOREA
Intermittent job pending issue during scanning a large volume of media with compact PDF as an option was resolved. Removed the improper ACR cleaning animation in MX7. Printing on a number of paper types including Letterhead / Punched / Preprinted was improved. Corrected job pending issue during duplex V folding in MAC OS. Modified mistranslation in German. Resolved the issue of which the print job is always printed on A3 regardless of what user selected Intermittent print job stoppage when user processes complete after DSDF jam. Resolved the issue of which reduced information, which was saved when program is generated, Added a feature that can allow FAP monitoring of inactivation function of USB memory stick. Added an option that enables changing the priority order of multi-use paper tray during copy, S5-3111 error not being displayed in error report was fixed. Fixed the issue of which the printer continues to print from a printable tray rather coming to a Took out the description about features that are not applied to Help app. Resolved the issue of system user being logged on instead of an actual print user when the user Fixed the issue of +Me Box still running even when Box Application is disabled. Added an option to maintain Jam animation until error is cleared. Secured a compatibility of PDF/A Scan file with ISO 19005-1. Added a feature to allow use or delete scan/ transmission destination. Added a function that aggregates usage data within a certain period of time selected by Counter Fixed user being automatically logged out while using MagStipe Readers login.
Improved the issue of the system slowing down in DHCP mode without DHCP server connection.
Correcting intermittent 1st and 2nd printing image mixed issue in case of Mono printing.
Fixed MP tray setting value is changed after Power on/off in case of envelop size.
Fixed slow printing issue when the set enables JAC Fleet Admin.
Fixed imaging unit failure problem when OPC or Deve Unit has H/W damage.
SEG
Adding a feature to align the secure job list in LIFO and FIFO forms as preferred by user.
SEF
SEDASIMPRES Adding a feature to turn on/off alarm for toner status when it's low. S
SEG
Adding a selecting feature for a paper tray and a media type using a PJL command.
Requirement Requirement Requirement Requirement
Requirement
Fixed issue Requirement
SR-1507000568 SR-1506000840 VO-1410000185 TS-1508000397 SR-1509000477 VO-1511000153 SR-1601000115 VO-1511000059 TP1660B4 TP16610P TS-1511000581 TS-1511000582 TS-1511000583
VO-1508000490
Requirement
VO-1509000398
Requirement
SR-1510000416
Requirement
VO-1511000388
Requirement
VO-1411000459 VO-1511000431
Requirement
SR-1512000207
V6.D6.29.01. 081720 Fixed issue
(2016-08-19) Fixed issue
TP1640HA
SR-1512000319
Fixed issue
TS-1601000638
SEG SEBJ SEA Korea SEDA Korea
SECA Korea SEI
SEF
Korea SEUK SELV SEF
SENA SEF
SAPL SEAU SEF SENA SEBN
Fixed issue Q1603_0175 Korea
Fixed issue TP1630CO SEBN
Fixed issue TP1630PW Korea
Fixed issue Fixed issue Fixed issue
Q1603_0263 TP1640AE TP1640EO
Korea SEAU SEBN
Fixed issue TP1640F8
SEAU
Requirement
SR-1503000854
Requirement
SR-1509000006
SEA Korea
Requirement TP1650U601 Korea
Fixed issue Fixed issue Fixed issue Requirement Fixed issue
TP1630CY TP16500S N/A TP1650NU TP1640IT
Korea SEA DEV SEAU SSA
Adding a feature of sending state information only when the entire job is completed for any job linked to VPSX server.
Adding a PC scanning feature using a USB cable.
Supporting UBS flash drive in NTFS format. Adding a feature for making a document box invisible to users who login as SWS when admin disables the box.
Adding a feature to allow users reboot a set at their desired time/cycle.
Improving the issue with intermittent failures when setting options for copy and/or authorization as Fleet Admin.
Disabling warning messages when the cover is open during platen scan.
Adding a delete and a preview feature during box printing. Modified to print a box-saved PRN file with Drive options that were applied when generating the PRN. Adding a feature to display telephone numbers or names (as saved in the address book) in the Fax Sent Report.
Adding a Test button in the E-mail notification setting for an SMTP check.
Adding a feature to reset a user's personal accounting information. Corrected the problem of a job being cancelled when Print job control is OFF and FDI balance is 0. Improving authentication errors when an FTP password contains ":".
Correcting the problem of test pattern not being printed in a service mode. Improving the connection failure problem due to non-support for NOOP command in a certain SMTP server. Adding additional paper types in the selection during Google cloud printing. Correcting intermittent failures of Color mode printing or color document being printed in mono during auto copying. Correcting intermittent Power off malfunctions in NFC user interface. Improving intermittent Kerberos authentication errors due to timing issue after powering on/off. Improving poor Dutch translation. Improving the issue of Multi destination emails not being sent when using a certain SMTP server.
Adding a feature to recognize papers smaller than A4.Letter as A4.Letter during scanning.
Adding a feature to include PSTN line state information in Fax Diagnostic Report. Supporting special characters (<, >, \, ") for a password. ( If usage enviroments is solution, then need to B2B driver and solution ) Improving reading errors when using EPSoft card readers. Improving print errors due to wrongly generated data during LPD/LPR print data processing. Improving the issue of U3-3313 jams caused by intermittent paper slips. Adding a feature to require a PIN for a color print when selecting a color PIN mode. Improving the issue of completed secure print job remaining on the job list.
Fixed issue TP1630AU
V6.D6.29 (15-July-
2016)
Fixed issue
TP1630FS TP1661SE
Fixed issue Fixed issue Requirement
Fixed issue
TP16403C TP1640IZ SR-1508000346 TS-1603000018
TP1660DJ02 Requirement SR-1507-
000265
Requirement Fixed issue Fixed issue Fixed issue Fixed issue Fixed issue
Fixed issue
Fixed issue Fixed issue Fixed issue Fixed issue Fixed issue
TP16613F TP16502T TP1640KG TP16706H TP1650AD Q1601_0282 Q1511_0437 TP16500R Q1604_0213 TP1650DL TP165051 TP1660OX
Fixed issue Fixed issue Fixed issue
TP1640DH
TS-1601000563
TP16303L03
Fixed issue TP16303L03
Fixed issue
TS-1601000202
Fixed issue TP1630D701
Fixed issue TP1630JX
Fixed issue TP1640XN
Fixed issue Fixed issue Fixed issue Fixed issue Fixed issue Fixed issue
Fixed issue
Fixed issue
Fixed issue
V6.D6.27.EC Fixed issue 1603.05 (03-Jun- Fixed issue 2016) Fixed issue
TP16500J01 TP1630TE TP1630TE TP1630HK TP1630RK TP1640M0
TS-1601000468
TP1630CM TS-1602000038 SR-1602000557 TS-1603000002 TS-1511000148
Fixed issue TP1640GR
Fixed issue
TP164030 SR-1510000459
SEA
SEA SECA SEAU SEG SESA
SEUK
SEG SEAU
SEUK SEA SEA SEG SECH Korea KOREA SEG KOREA SEA SME KOREA SEUK
SESG
SESG
SESG
SENA
SEI SEI SEI SEG SEF SEF SEBN SEBN SEBN SEAU SEA SEA
SEA
SEA
SEA
SEA
SEA
When previewing PDF or TIFF images on Box App, the previewed image may have unexpected white blank on right side if it was scanned with mono mode
During Scaning with compact PDF option, Set locks up at times.
Fixing memory leackage issue according to repeated solution install/uninstall. The poor German translation(StauWdrherste) will be changed. Adding specific setting method through PJL command. - PCL font size, Tray1 paper size, Mp Tray paper size.
Correcting the problem of complex PDF document not being printed intermittently.
Adding Numeric keypad for PIN code input in solution (API only ).
Adding APK installation method in the Fleet Admin Pro. Fixing wrong IP address displaying on the notification screen in case of DHCP mode. Fixing powerpoint abnormal output from MAC office 2016. Improving performance of 1-bit indexed color image document. Fixing printing job pending issue according to authentication fail. Improving scanning speed when user sends many fax images. Defective image quality due to toner overfeed when printing large number of low coverage images ( Augermark ). Fix inability to use '$' character in Scan to SMB path. Fix occasional false alarms on HDD error (S1-2448, S1-2443) during FW upgrade. Fix printing is not restarted after removing BinFull (H2-8A33) error from booklet finisher. Fix occasional inoperability on Copy Widget +.- buttons. Fix printing jobs are held at times when burst job request is received. Enhanced overall UI performance for a case where a device supports more than 501 external user IDs.
Fixed a job pending issue during Scan to SMB using NetApp SMB server.
Fixed an issue of user email not being prefilled in Send App during the Basic and Application Auth Mode while using Safecom solution. Fixed an issue of Safecom pull print application closing immediately after a user login. Enhanced the safecom login operations for time-dependent cases. Enhanced user login performace (reduced the login time) for a case where hundreds of secure print jobs are stored in a device. Applied a scan authority checking process for a case where Dynamic Workflow is executed in the Application Auth mode before Send App launches after the device boots up. Enhanced the performance of overall email notification service features. Enhanced copy widget performance for a case where a user tries to conduct a job immediately after a device boots up or wakes up from a power save mode. Fixed to handle invalid command sets in a print data (PRN) file received from AS400 server. Disabled the PDF/A option for 600 dpi resolution in Send app. Added finisher errors (H2-6531,H2-6533) to error history reports. Fixed an issue of not cloning the authentication status in the admin setting for printing. Improved the toner gauge accuracy for eco printing where toner usage is very low. Fixed an issue of applying incorrect tray protection settings to the UI. Fixed an issue of scan images having a light background when a scan job is done with an "Auto Color : Color/Mono" option on. Fixed an issue of device card login not working sometimes in a sleep mode.
Enhanced print performance for duplex images (color/mono mixed images).
Enhanced copy print output performance for a copy job with 1 to 2 Duplex using 7 original documents.
Added more animations for paper jam clearing guidance.
Made Scan to FTP compatible with Serv-U FTP server.
Fixed an issue of output images becoming brighter for mixed-size original (MSO) copy in a simplex mode.
Improved the balnk page detection rate especially for jobs with a Mono or Grey mode.
Fixed issue TP1650TS
Fixed issue
Fixed issue Fixed issue Fixed issue Fixed issue Fixed issue
TS-1601000459 TP16400T04 TP1630RG TP1640H0 TP165022 -
Fixed issue -
Requirement -
Fixed issue -
Fixed issue Fixed issue -
Fixed issue -
V6.D6.27 (25-Mar-
2016)
Fixed issue -
Fixed issue -
Fixed issue N/A
Fixed issue TP1630B8
Fixed issue Fixed issue Fixed issue Requirement Fixed issue
Fixed issue
Fixed issue
Fixed issue
Fixed issue Fixed issue Fixed issue Fixed issue Fixed issue
TS-1602000104 N/A N/A N/A TS-1602000076 TS-1601000454 TS-1601000564 SR-1602000397 TS-1512000456 N/A SR-1601000384 TP16307B SR-1601000624
Fixed issue
SR-1601000624
Fixed issue Fixed issue Fixed issue
TS-1602000036 TS-1602000036 TS-1601000186
Add Func
Add Func
V6.D6.08 (18-Jan2016)
Add Func Add Func Add Func Add Func Fix defect Fix defect
Fix defect
Fix defect Fix defect Fix defect Fix defect Fix defect
SEA
SAPL
KOR KOR KOR KOR -
-
-
-
-
-
KOREA SEA SEAU SEAU SEAU SEA SEG
SEAU SEUK SEG SEA
SEBN KOREA SEI SEG SEA SEA
SEA
SEA
SEA
SEA
Added SFE055 to enable users to select the sensor-detected #10 envelope paper size on a tray confirmation popup. Fixed an issue of color options not being able to be saved as default in Quick Copy in a Device Authentication mode. Fixed the login page sometimes displaying a white screen. Enhanced Copy widget printout performance to be as powerful as that of Copy App. Enhanced secure job cancel function to delete received data completely. Fixed Autologout not working sometimes in the Device UI. MyPage App is restricted for external authenticated users as per the spec. Fixed an issue of a machine continuously warming up due to C8-3314 (Toner Supply Error) when powered on. Applied security compliance requirements from the Korean Government. Fixed a finisher error (H2-8262) which occured when executing a C-fold simplex print job right after a V-fold simplex print job. Fixed a 4K-Finisher jam error which occured when an OHP flim is used for copy. Fixed book erase not working in Copy App when the Custom option is selected as korean. Changed the version check policy to allow update for an engine sub firmware when the second sequence of its version name is different from the current one. Improved the management of the IP filtering feature and its default values. Fixed a rarely-occuring device lockup issue in powersave. Print jobs are held at times when SecuThru (a secure printing software) is used. The fuser cleaning sheet is not printed when the default paper size is Letter.
GCP service fails as an expired key is not refreshed.
The fax redials the number that was previously entered when dialing using the fax keypad under Send Job Cancel does not work at times right after starting Send Job when the Searcheable PDF New US standard setting values were applied. (Default values for US models) When making a searcheable PDF with a 300 dpi or lower resolution, scanned images are cropped and the text on the scans is hard to read in MS Word.
The device locks up intermittently during scan when Job Progress Window is off.
Send does not work at times when Skip Blank Page is on.
Scan to SMB fails if filename contains a space.
The number of copies cannot be selected when IPP printing in MAC OS.
Scan to PC shortcuts generated in a previous version (Vx.C6.xx) do not work after upgrading to
Fax confirmation reports are not printed to fit one page.
If the top bin of an inner finnisher is selected as the output tray, UI progress information is
If Home Lock is enabled for all users, duplicate icons appear on the Home screen at times.
If a user changes the setting of Copy Customizer, the copy OOB setting also changes.
The Compact PDF option does not work when scanning with the Auto Color Mode on.
Scan Adjustment was modified to work according to the default paper size (A4 or Letter) of a country/region in which the machine will be used. An output tray selected for incoming faxes changes back to the default tray after waking up in a power save mode. Support function to create "Web page" shortcuts on the main UI. Support Scan ACS Function : In send app, "Auto" Mode (Automatic Color selection) is added. V folding support for print jobs. Added PIN only authentication mode. Error code and description improved. Provides detailed information. SSL, TLS, None are supported for SMTP from SWS The paper option is displayed Custom size on Apple device. B4 paper size can not be recognized properly. When two interface (Ethernet/Wifi) have same IP Address. IP conflict error message will be displayed on UI board. If Application Authentication is enabled, previouly created short-cut does not work. Not able to send fax for more than 15 recipients. The output has wrong page order of booklet. You may see that LCD is black after wakeup by touch or wakeup by jobs. File can not be deleted from Box.
V6.A6.28 (8-Oct-2015)
V6.A6.25 (07-Sep-
2015)
Fix defect Fix defect
Fix defect
Fix defect
Fix defect Fix defect Fix defect Fix defect Fix defect Fix defect Fix defect
Fix defect
Fix defect Fix defect Fix defect Fix defect Fix defect Fix defect Fix defect Fix defect Fix defect Fix defect Fix defect Fix defect Fix defect
Fix defect
Fix defect Fix defect Fix defect Fix defect Fix defect
Fix defect
Fix defect Fix defect Fix defect
Fix defect
Fix defect Fix defect Fix defect Fix defect Fix defect Fix defect Fix defect Fix defect Fix defect Fix defect
Fix defect
Fix defect Fix defect Fix defect
Fix defect
Fix defect Fix defect Fix defect
Booklet printing speed is improved. User is not able to edit Wi-Fi IP settings. IP Setting menu from UI is disabled intermittently.
TC control parameter change for improvement of toner scattering according to the developer life.
Correct sensor deviation by CTD Sensor Calibration algorithm.
Fix defect of 2K Booklet Finisher jam. Fix defect that Original size detection is failed in case of ADF open in Copy job. Copy Save to box -> Store and print file name overwrite issue. Fix defect that Scan to USB job is not happening after OHD Job. Improve, SWS set 400% , Copy show 400 %. but output paper is 100% issue. Fix that App crash is observed if user taps on to the UI while image loading is on progress. Fix not for launching Send App. Fix defect that the overwrite function doesn't work when import address book CSV file under GUI. PaperCut flicking issue. Changing of OPC life calculation logic. Fix Jam issue which has been occurring from MP tray. Fix duplex printing skew. Improve detecting Document. size feature. Fix defect that, after Initial setup, rebooting is not processed properly. Fix defect when duplex print, broken image can be printed out in 2-2 Copy. Fix back side 5mm band contamination issue. Support Korean language file name on ScanToPC menu. Supply security patch for Apk integrity. Machine rebooted very very rarely at receiving in case Machine is turned on by soft power on. Fix defect that user can't cancel current job sometimes. Fix defect of S5-3111 error during power save procedure. Fix defect of showing S5-3111 error on UI after sending print job while machine stays in sleep mode.
Fix defect that machine will not wake up from UI sleep mode in spite of wake up event. Fix wrong translation in Finnish. Fix Scan & send App to launch properly. Fix defect of not deleting job list in UI. Fix defect that there is no action when press tray lock icon on notification bar. Fix defect that XOA-Web login page issue. (showing home page instead of Xoa application page). Improvement, unsupported input char are allowed in Send app. Fix defect of not working copy widget. Add function to Send App of removing destinations after the Job is started. Fix defect that the Send App was crashed while launching the program with Auto start option, sometimes.
OPC Remain Algorism modification. Improve the fuser heating period on ready status. Improve Inner Finisher feature. Fix defect of 3K Finisher error. Fix defect of changing tray Job being occurred abnormally. Fix defect that the AA method is reset to 'Local' after the admin. enables/disables SFE13. Fix that Skip blank page option is not working in send. Fix defect of rebooting by internal buffer overrunning. Fix defect of rebooting and broken image on 2-2 copy. Job status addition in Quick Launch. Fix defect that when user adds manual route entry in routing table through SWS after reboot, user defined entry is lost and user is not able to set Wifi as default gateway. Add function of increased Font Size to 26 DP in Send application. Improve printing of envelope. Fix defect that printer doesn't wake up from power save by usb printing.
Fix defect of broken image on duplex print (A5 SEF 2 - 2 book copy To MP Tray with Finisher).
Changing toner CTS table. Fix file name issue of Korean character in ScanToPC. Fix not printing issue during Auto color balance.
Microsoft Excel for Office 365