Home › Miller Domestic warranty 2021-01

Miller Domestic warranty 2021-01

File info: application/pdf · 1 pages · 49.07KB

Effective January 1, 2021 (Equipment with a serial number ...

Effective January 1, 2021 (Equipment with a serial number preface of NB or newer) This limited warranty supersedes all previous Miller warranties and is exclusive with no other guarantees or warranties expressed or impl…

1 janv. 2021 — This limited warranty supersedes all previous Miller warranties and is exclusive with no other guarantees or warranties expressed or implied.

Full PDF Document

If the inline viewer fails, it will open the original document in compatibility mode automatically. You can also open the file directly.

Extracted Text

Warranty Questions?
Call 1-800-4-A-MILLER for your local Miller distributor.
Your distributor also gives you ...
Service You always get the fast, reliable response you need. Most replacement parts can be in your hands in 24 hours.
Support Need fast answers to the tough welding questions? Contact your distributor. The expertise of the distributor and Miller is there to help you, every step of the way.

Effective January 1, 2021 (Equipment with a serial number preface of NB or newer)

This limited warranty supersedes all previous Miller warranties and is exclusive with no other guarantees or warranties expressed or implied.

LIMITED WARRANTY - Subject to the terms and conditions below, Miller Electric Mfg. LLC, Appleton, Wisconsin, warrants to authorized distributors that new Miller equipment sold after the effective date of this limited warranty is free of defects in material and workmanship at the time it is shipped by Miller. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
Within the warranty periods listed below, Miller will repair or replace any warranted parts or components that fail due to such defects in material or workmanship. Miller must be notified in writing within thirty (30) days of such defect or failure, at which time Miller will provide instructions on the warranty claim procedures to be followed. Notifications submitted as online warranty claims must provide detailed descriptions of the fault and troubleshooting steps taken to diagnose failed parts. Warranty claims that lack the required information as defined in the Miller Service Operation Guide (SOG) may be denied by Miller.
Miller shall honor warranty claims on warranted equipment listed below in the event of a defect within the warranty coverage time periods listed below. Warranty time periods start on the delivery date of the equipment to the end-user purchaser, or 12 months after the equipment is shipped to a North American distributor, or 18 months after the equipment is shipped to an international distributor, whichever occurs first.
1. 5 Years Parts -- 3 Years Labor
* Original Main Power Rectifiers Only to Include SCRs, Diodes, and Discrete Rectifier Modules
2. 3 Years -- Parts and Labor Unless Specified * Auto-Darkening Helmet Lenses (No Labor) * Engine Driven Welder/Generators (NOTE: Engines are Warranted Separately by the Engine Manufacturer.) * Insight Welding Intelligence Products (Except External Sensors) * Inverter Power Sources * Plasma Arc Cutting Power Sources * Process Controllers * Semi-Automatic and Automatic Wire Feeders * Transformer/Rectifier Power Sources
3. 2 Years -- Parts and Labor * Auto-Darkening Weld Masks (No Labor) * Fume Extractors - Capture 5, Filtair 400 and Industrial Collector Series
4. 1 Year -- Parts and Labor Unless Specified
* ArcReach Heater * AugmentedArc and LiveArc Welding Systems * Automatic Motion Devices * Bernard BTB Air-Cooled MIG Guns (No Labor) * CoolBelt (No Labor) * Desiccant Air Dryer System
* Field Options (NOTE: Field options are covered for the remaining warranty period of the product they are installed in, or for a minimum of one year -- whichever is greater.)
* RFCS Foot Controls (Except RFCS-RJ45) * Fume Extractors - Filtair 130, MWX and SWX Series,
ZoneFlow Extraction Arms and Motor Control Box * HF Units * ICE/XT Plasma Cutting Torches (No Labor) * Induction Heating Power Sources, Coolers
(NOTE: Digital Recorders are Warranted Separately by the Manufacturer.) * Load Banks * Motor-Driven Guns (except Spoolmate Spoolguns) * PAPR Blower Unit (No Labor) * Positioners and Controllers * Racks (For Housing Multiple Power Sources) * Running Gear/Trailers * Subarc Wire Drive Assemblies * Supplied Air Respirator (SAR) Boxes and Panels

* TIG Torches (No Labor) * Tregaskiss Guns (No Labor) * Water Cooling Systems * Wireless Remote Foot/Hand Controls and Receivers * Work Stations/Weld Tables (No Labor)
5. 6 Months -- Parts
* 12 Volt Automotive-Style Batteries
6. 90 Days -- Parts
* Accessories (Kits) * ArcReach Heater Quick Wrap and Air Cooled Cables * Canvas Covers * Induction Heating Coils and Blankets, Cables, and
Non-Electronic Controls * MDX Series MIG Guns * M-Guns * MIG Guns, Subarc (SAW) Torches, and External
Cladding Heads * Remote Controls and RFCS-RJ45 * Replacement Parts (No labor) * Spoolmate Spoolguns
Miller's True Blue� Limited Warranty shall not apply to:
1. Consumable components; such as contact tips, cutting nozzles, contactors, brushes, relays, work station table tops and welding curtains, or parts that fail due to normal wear. (Exception: brushes and relays are covered on all engine-driven products.)
2. Items furnished by Miller, but manufactured by others, such as engines or trade accessories. These items are covered by the manufacturer's warranty, if any.
3. Equipment that has been modified by any party other than Miller, or equipment that has been improperly installed, improperly operated or misused based upon industry standards, or equipment which has not had reasonable and necessary maintenance, or equipment which has been used for operation outside of the specifications for the equipment.
4. Defects caused by accident, unauthorized repair, or improper testing.
MILLER PRODUCTS ARE INTENDED FOR COMMERCIAL AND INDUSTRIAL USERS TRAINED AND EXPERIENCED IN THE USE AND MAINTENANCE OF WELDING EQUIPMENT.
The exclusive remedies for warranty claims are, at Miller's option, either: (1) repair; or (2) replacement; or, if approved in writing by Miller, (3) the pre-approved cost of repair or replacement at an authorized Miller service station; or (4) payment of or credit for the purchase price (less reasonable depreciation based upon use). Products may not be returned without Miller's written approval. Return shipment shall be at customer's risk and expense.
The above remedies are F.O.B. Appleton, WI, or Miller's authorized service facility. Transportation and freight are the customer's responsibility. TO THE EXTENT PERMITTED BY LAW, THE REMEDIES HEREIN ARE THE SOLE AND EXCLUSIVE REMEDIES REGARDLESS OF THE LEGAL THEORY. IN NO EVENT SHALL MILLER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOSS OF PROFIT) REGARDLESS OF THE LEGAL THEORY. ANY WARRANTY NOT PROVIDED HEREIN AND ANY IMPLIED WARRANTY, GUARANTY, OR REPRESENTATION, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE, ARE EXCLUDED AND DISCLAIMED BY MILLER.
Some US states do not allow limiting the duration of an implied warranty or the exclusion of certain damages, so the above limitations may not apply to you. This warranty provides specific legal rights, and other rights may be available depending on your state. In Canada, some provinces provide additional warranties or remedies, and to the extent the law prohibits their waiver, the limitations set out above may not apply. This Limited Warranty provides specific legal rights, and other rights may be available, but may vary by province.

mil dom warr 2021-01