SERIES 3200G | MERCOID BY DWYER PRESSURE EXPLOSION-PROOF ...

EXPLOSION-PROOF PRESSURE TRANSMITTER HART , Push-Button Configuration, Rangeability (100:1) 104 DWYER INSTRUMENTS, INC. | dwyer-inst.com The Mercoid Series 3200G Explosion-Proof Smart Pressure Transmitter is a microproc…
3200G Series Data Sheet

kele.com | Dwyer Instruments 3200G-2-FM-1-1-LCD | Pressure | Hazardous
Full PDF Document

If the inline viewer fails, it will open the original document in compatibility mode automatically. You can also open the file directly.
Extracted Text

PRESSURE

SERIES 3200G | MERCOID� BY DWYER
EXPLOSION-PROOF PRESSURE TRANSMITTER
HART�, Push-Button Configuration, Rangeability (100:1)
3-1/2 [89]

4-1/4

[108]

2-3/4

1-1/2

[70]

[38]

6-1/4 [159]

VIDEO ON

LINE

1/2 NPT

The Mercoid� Series 3200G Explosion-Proof Smart Pressure Transmitter is a microprocessor-based high performance transmitter, which has flexible pressure calibration, push-button configuration, and programmable using HART� Communication. The Series 3200G is capable of being configured with the zero and span buttons, a field calibrator is not required for configuration. The transmitter software compensates for thermal effects, improving performance. EEPROM stores configuration settings and stores sensor correction coefficients in the event of shutdowns or power loss. The Series 3200G is FM approved for use in hazardous (Classified) locations. The 100:1 rangeability allows the smart transmitter to be configured to fit any application. FEATURES/BENEFITS � Completely configurable using zero/span buttons (no calibrator required) � Rangeability (100:1) � High accuracy (�0.075%) � Automatic sensor temperature compensation � Fail-mode process function APPLICATIONS � Water and wastewater � Chemical and petrochemical � Pulp and paper � Oil and gas � Food and beverage

SPECIFICATIONS Service: Compatible gases, steam, liquids or vapors. Wetted Materials: 316L SS. Accuracy: �0.075% FS (@ 20�C). Rangeability: 100:1 turn down. Stability: �0.125% FSO/yr. Temperature Limits: Process: -40 to 248�F (-40 to 120�C); Ambient: Without LCD -40 to 185�F (-40 to 85�C); With LCD -22 to 176�F (-30 to 80�C). Thermal Effect: �0.125% span/32�C. Power Requirements: 11.9-45 VDC. Output Signal: 4-20 mA / HART� Communication. Response Time: 0.12 s. Damping Time: 0.25 to 60 s. Loop Resistance: Operation: 0 to 1500 ; HART� Communication: 250 to 500 . Electrical Connection: Two 1/2 female NPT conduit, screw terminal. Process Connections: 1/2 female NPT. Display: Optional 5 digit LCD. Enclosure Rating: NEMA 4X (IP66) and explosion proof for Class I, Div I Groups A, B, C and D. Weight: 5.5 lb (2.5 kg). Agency Approvals: ATEX, CE, FM.

MODEL CHART

Model

Range psi (kPa)

Span Limits*

Maximum Pressure

Minimum psi (kPa) Maximum psi (kPa) psi (bar)

3200G-1-FM-1-1

-14.5 to 21 (-100 to 150) (Factory set 0 to 21 psig) 0.22 (1.5)

3200G-2-FM-1-1

-14.5 to 217 (-100 to 1500) (Factory set 0 to 217 psig) 2 (15)

3200G-3-FM-1-1

0 to 725 (0 to 5000)

7.25 (50)

3200G-4-FM-1-1

0 to 3600 (0 to 25000)

36 (250)

3200G-5-FM-1-1

0 to 8500 (0 to 60000)

87 (600)

3200G-1-FM-1-1-LCD -14.5 to 21 (-100 to 150) (Factory set 0 to 21 psig) 0.22 (1.5)

3200G-2-FM-1-1-LCD -14.5 to 217 (-100 to 1500) (Factory set 0 to 217 psig) 2 (15)

3200G-3-FM-1-1-LCD 0 to 725 (0 to 5000)

7.25 (50)

3200G-4-FM-1-1-LCD 0 to 3600 (0 to 25000)

36 (250)

3200G-5-FM-1-1-LCD 0 to 8500 (0 to 60000)

87 (600)

21 (150) 217 (1500) 725 (5000) 3600 (25000) 8700 (60000) 21 (150) 217 (1500) 725 (5000) 3600 (25000) 8700 (60000)

58 (4) 580 (40) 2000 (138) 10000 (690) 11600 (800) 58 (4) 580 (40) 2000 (138) 10000 (690) 11600 (800)

Note: Contact factory for custom calibration. *Span = Upper range limit - Lower range limit.

LCD Display No No No No No Yes Yes Yes Yes Yes

ACCESSORIES

Model

Description

A-630

Stainless steel angle type bracket with SSbolts

A-631

Stainless steel flat type bracket with SSbolts

BBV-0N

2-valve block manifold

DevCom2000 HART� communication protocol software

Single Pressure Transmitters

104 DWYER INSTRUMENTS, INC. | dwyer-inst.com

HART� is a registered trademark of Hart Communication Foundation.

PRESSURE

SERIES 3200G | MERCOID� BY DWYER
EXPLOSION-PROOF PRESSURE TRANSMITTER
HART�, Push-Button Configuration, Rangeability (100:1)

MODEL CHART

Example

3200G -2 -FM -3 -1 -LES S2 A1 05 S 2 -05 -LCD 3200G-2-FM-3-1-LESS2A105S2-05-LCD

Series

3200G

Explosion-proof pressure transmitter

Range

1

2

3

4

5

-14.5 to 21 psig (factory set 0 to 21 psig) -14.5 to 217 psig (factory set 0 to 217 psig) 0 to 725 psig 0 to 3600 psig 0 to 8500 psig

Approval

FM ATEX WP

FM approved ATEX approved Weatherproof only (Only available with 316 SS housing)

Process Connection

1

3

1/2 female NPT Diaphragm seal

Electrical Connection

1

1/2 female NPT

Diaphragm Seal Type

LED

LES

1 extended diaphragm seal direct mount 1 extended diaphragm seal capillary type high

LFD

1 flush diaphragm seal direct mount

LFS

1 flush diaphragm seal capillary type

Mounting Flange

S2

2 (50 mm) 316L SS

S3

3 (80 mm) 316L SS

Mounting Flange Rating

A1

ANSI class 150#

A2

ANSI class 300#

D1

DIN PN 10/16

D2

DINPN 25/40

J1

JIS 10 K

J2

JIS 20 K

Extension Length

00

No extension (standard for flush mount)

05

2 extension

10

4 extension

15

6 extension

Diaphragm Material

S

316L SS diaphragm

P

PTFE and 316L SS diaphragm

H

Hastelloy C-276 diaphragm

T

Tantallum diaphragm

Fill Fluid

2

Silicon oil (-40 to 400�F)

Capillary Length

XX

0 to 20 feet

Options

LCD 5 digit LCD SSH 316 SS housing (only available with WP approval) NIST NIST calibration CC Custom calibration

CUSTOM CALIBRATION VALUES

Primary Units

in w.c., ft w.c., mm w.c., in Hg, psig, g/cm2, kg/cm2, Pa, kPa, bar, mbar, Torr, Atm, mm Hg

Upper Range Limit 20 mA value

Lower RangeLimit 4 mA value

Damping Time

0 to 60 seconds

Display Mode

Primary unit, %, mA, rotate

Single Pressure Trans