BOOX Leaf Quick Start Guide
This guide provides essential information for quickly setting up and using your BOOX Leaf device.
Device Overview
The BOOX Leaf is an E Ink reader designed for a comfortable reading experience.
For more detailed instructions, please refer to the pre-loaded User Manual or visit the official BOOX website for technical support.
Website: www.boox.com
Device Components and Accessories
The BOOX Leaf device features the following:
- 1. Power Button
- 2. Microphone
- 3. USB-C Port
- 4. Speakers
Included accessories:
- a. BOOX Device
- b. Warranty Card
- c. Quick Start Guide
- d. USB-C Cable
Getting Started
Turning On the Device
Hold down the power button for 2-3 seconds.
Charging the Device
When the battery is low or the device cannot be turned on, charge it by connecting to a PC or a power supply with an adapter. The indicator light will illuminate while charging and turn off once the battery is fully charged.
Firmware Updates
You can update the device firmware by downloading packages to the root directory of the local storage or by using Over-The-Air (OTA) updates directly on the device.
Forcing a Shutdown
To force the device to shut down, hold the power button for approximately 8 seconds.
Full User Manual
For comprehensive information, please access the full User Manual on the official BOOX website:
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
[warning] Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Radiation Exposure Statement
This device complies with RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Support and Contact Information
Customer support center: https://www.boox.com/support/
Email: help@boox.com
Manufacturer: Onyx International Inc.
Made in China.
[CE certification]