30 ott 2020 — Plug-in. Equalizer Board. 12000-L-PBT 1.2GHz Taps. T-EQ-*-Q. T-CS-*-Q. T-RPA/K-*-Q. N/A. BTTF*-*Q 1.2GHz Taps. T-EQ-*-Q. T-CS-*-Q. T-RPA/S-*.
HFC Product Accessories Reference Guide ARRIS offers a full complement of plug-in accessories for our strand-mount, cabinet-mount, and rack-mount transmission and distribution equipment. In most cases, these plug-in accessories can be shared across similar product lines. Options include: Tested and designed specifically for ARRIS products by our ARRIS engineers forward and return attenuators (PADs) ARRIS accessories are designed for full functionality over operating temperature ARRIS authorized accessories should be used for guaranteed performance forward and return equalizers forward cable simulators input configuration modules output distribution accessories Product warranties are applicable exclusively to ARRIS authorized accessories active and passive return channel modules diplexers automatic gain control modules control (signature correction) modules The first section, Accessories By Product Line, provides a broad overview of the accessories available for each ARRIS product. A series of sections, organized under Forward Path Accessories, Return Path Accessories, and Miscellaneous Accessories follow; these sections list all accessories with a photo (where available) and basic information regarding the product usage. The last section provides Technical Specifications for each accessory listed. Contact your ARRIS sales professional if you do not see the ARRIS broadband transmission or distribution product of interest. ACCESSORIES BY PRODUCT LINE Table 1 ARRIS Starline 1.2 GHz RF Amplifiers Model MB120 MiniBridger BLE120 Line Extender PN Prefix Forward PADs Forward Equalizers MB120 BLE120 JXP-*B NPB-* JXP-*B NPB-* CE-120-* CE-120-* Cable Simulators CS-120-* CS-120-* Return PADs JXP-*B NPB-* JXP-*B NPB-* Return Equalizers SRE-*-* SRE-*-* Output Distribution Accessories SP120 DC120/* N/A Automatic Gain Control ADU QADU ADU QADU Table 2 ARRIS Flex Max® 1 GHz RF Amplifiers Model P/N Prefix FM901e-T1 FMTEG Trunk FM901e-B1 FMBEG Bridger FM601e-T Trunk1 FM6T FM601e-B Bridger1 FM6B FM601e-LE Line Extender1 FM6E FM331-LE Line Extender1 FML1G FM321e-LE Line Extender1 FM321G Key N/A: not applicable W/O:without covers WC: with covers Forward PADs NPB NPB 10-A-WC 10-A-WC THRM 10-A-WC THRM NPB Amini (interstage) 10-A-WC THRM Forward Equalizers SEQ-1G SEQ-862 SEQ-750 GEQC-1G (O/P) GEQC-870 (O/P) GEQL-1G (O/P) SEQ-1G SEQ862 SEQ750 PEQ-1G 7-2E862-WC 7-2E750-WC PEQ-1G 7-2E862-WC 7-2E750-WC PEQ-1G 7-2E862-WC 7-2E750-WC SEQ-1G SEQ-862 W/O SEQ-750 W/O PEQ-1G 7-2E862-WC 7-2E750-WC Cable Simulators SCS-1G SCS-1G PCS-1G PCS-1G PCS-1G SCS-1G PCS-1G Return PADs NPB2 Return Equalizers MEQ-42, 55, 65, 85 MEQT-42, 85 NPB2 10-A-WC 10-A-WC2 10-A-WC2 MEQ-42, 55, 65, 85 MEQT-42, 85 7-REF42/x-WC 7-REF55/x-WC 7-REF65/x-WC 7-REF42/x-WC 7-REF55/x-WC 7-REF65/x-WC 7-REF42/x-WC NPB 10-A-WC MEQ-42, 55, 65, 85 MEQT-42, 85 9-A/*-WC 10-A/*-WC Output Distribution Accessories S-Series S-Series 7-DC-Series 7-DC-Series N/A N/A N/A 1. Signature Correction Modules are available for all ARRIS Flex Max RF amplifiers. 2. Noise Filter may be used in the Return PAD location. FM901e-T/B require a standard height noise filter be used in combination with an adaptor in the Return PAD location. For FM401, the taller (1.4 inch) noise filter is recommended for ease of installation and removal. 2 HFC Product Accessories Reference Guide 1513173 Rev C Table 3 ARRIS Starline 1 GHz RF Amplifiers Model BT100 Amplifier MBV3 MiniBridger MB100 MiniBridger BLE100 Line Extender PN Prefix Forward PADs Forward Equalizers BT100 JXP-*B SFE-100-*-R MBV3 JXP-*B SFE-100-*-R MB100 JXP-*B SFE-100-*-R BLE100 JXP-*B SFE-100-*-R Cable Simulators SCS-* SCS-* SCS-* SCS-* Return PADs JXP-*B JXP-*B JXP-*B JXP-*B Return Equalizers SRE SRE SRE SRE Output Distribution Accessories N/A N/A SP120 DC120/* N/A Automatic Gain Control TDU ADU QADU TDU/V ADU/V QADU/V TDU ADU QADU TDU ADU QADU Table 4 ARRIS Optical Products Model CHP Dual TX CHP Single TX Opti Max OM4120 Opti Max OM6000 Opti Max OM4100 Trans Max TM4100 Opti Max OM27411 Opti Max OM1111 NC2000 1.2 GHz Series NC4000 1.2 GHz Series SG4000 P/N Prefix Forward PADs Forward Equalizers Cable Simulators Return PADs Amini Short CHP Plug-in EQ N/A CHP PAD N/A N/A OM412 NPB EQL-1.2GHZ N/A GEQL-1GHZ GEQL-870 OM6 NPB EQL-1.2GHZ N/A GEQL-1GHZ GEQL-870 N/A N/A NPB NPB Output Distribution Accessories N/A N/A N/A N/A OM41 TM41 OM27 OM11G NC2 NC4 SG4 NPB N/A GEQL-1GHZ GEQL-870 N/A NPB GEQL-1GHZ GEQL-870 GEQC-1GHZ GEQC-870 SEQ-1G SEQ-870 SEQ-750 10-A-WC1 GEQL-1GHZ-xxx-1 GEQL-870-xxx-1 AP-4100x-L EQ21xxE-1.2GHZ EQ21xxG-1GHZ EQ21xx-870MHZ AP-4100x-L EQ21xxE-1.2GHZ EQ21xxG-1GHZ EQ21xx-870MHZ JXP-B* LME-87-* LME-100-* N/A N/A SCS-1G N/A N/A N/A N/A NPB NPB (analog only) NPB 10-A-WC AP-4100x-L AP-4100x-L JXP-B* N/A N/A S-Series N/A N/A N/A N/A VTN244 JXP-B* FLEQ N/A JXP-B* N/A Key N/A: not applicable W/O:without covers; WC:with covers Freq. Split Accessories N/A N/A RPLPF Roll-off Compensation Board Diplex Filter RPLPF Roll-off Compensation Board Diplex Filter RPLPF Roll-off Compensation Board Diplex Filter 1513173 Rev C HFC Product Accessories Reference Guide 3 Model 12000-L-PBT 1.2GHz Taps BTTF*-*Q 1.2GHz Taps FFE-*-120*/RP Equalizers FFT*-*Q 1.2GHz Taps RMT2120 1.2 GHz Taps Table 5 ARRIS Taps and Equalizers Cable Equalizers T-EQ-*-Q T-EQ-*-Q N/A T-EQ-*-Q T-EQ-*-Q Cable Simulators T-CS-*-Q T-CS-*-Q N/A T-CS-*-Q T-CS-*-Q Return Attenuators T-RPA/K-*-Q T-RPA/S-* N/A T-RPA/K-*-Q T-RPA/K-*-Q Plug-in Equalizer Board N/A N/A G120-* N/A N/A 4 HFC Product Accessories Reference Guide 1513173 Rev C Accessories by Product Line--Discontinued Legacy ARRIS Products Legacy products listed below have been discontinued by ARRIS. Please consult your authorized ARRIS sales representative for upgrade options. The following tables list available accessories that support the installed legacy products. Table 6 Legacy Flex Max® RF Amplifiers Model P/N Prefix Flex Max901 Trunk/Bridger Flex Max900 Trunk/Bridger Flex Max601 Bridger Flex Max601 Line Extender FM4011, 2 FMT1G FMB1G FNT9 FNB9 FM6B FM6L FM401 Forward PADs NPB SPB 10-A-WC 10-A-WC NPB Flex Max340 Flex Max330 Flex Max321 NL1x NL2x FM330 FM321G SPB NPB 10-A-WC Flex Max320 AMP008x 10-A-WC THRM Flex Max222 Flex Max220P Flex Max220B Key FM222 NPB Amini FM220-P NPB Amini FM220-B NPB Amini N/A: not applicable W/O:without covers Forward Equalizers SEQ-1G SEQ-862 W/O SEQ-750 W/O SEQ-862 SEQ-750 SEQPB PEQ-1G 7-2E862-WC 7-2E750-WC PEQ-1G 7-2E862-WC 7-2E750-WC FEQC-1G FEQC-870 FEQC-750 SEQ-862 SEQ-750 SEQ-862 W/O SEQ-750 W/O PEQ-1G 7-2E862-WC 7-2E750-WC 7-2E862-WC 7-2E750-WC Amini E862/xx E606/xx Amini WC:with covers Cable Simulators SCS-1G SCS-862 PCS-1G PCS-1G CBSM-1G SCS-862 SCS-862 W/O PCS-1G PCS-1G N/A CE862/x N/A Return PADs Return Equalizers NPB MEQ-42 MEQT-42 SPB 10-A-WC1 MEQ-42, 55, 65, 85 MEQT-42, 85 7-REF42/x-WC 10-A-WC1 7-REF42/x-WC NPB2 SPB NPB 10-A-WC REQC-42 REQC-65 REQC-85 MEQ-42, 55, 65, 85 MEQT-42, 85 MEQ-42 MEQT-42 7-REF42/x-WC 10-A-WC Amini1 Amini1 Amini1 7-REF42/x-WC 7-REF55/x-WC 7-REF65/x-WC Amini Amini Amini Output Distribution Accessories S-Series S-Series 7-DC-Series N/A 7-DC-Series3 N/A N/A N/A N/A 7-DC-Series N/A N/A 1. Noise Filter may be used in the Return PAD location. 2. D30/47, D42/54, and D55/70 plug-in diplex filters are available. The original diplex filters were qualified for use in 870 MHz systems. The new diplex filters are qualified for use in 1 GHz systems. The new diplex filters have the same model numbers as the original diplex filters. 3. 7-DC-Series accessories may also be used in the Input Splitter location. 1513173 Rev C HFC Product Accessories Reference Guide 5 Model PN Prefix Table 7 Legacy Motorola Starline RF Amplifiers Forward PADs Forward Equalizers Cable Simulators Return PADs Return Equalizers Output Distribution Accessories Automatic Gain Control SLE100 Line Extender SLE100 JXP-*B SFE-100-*-R SCS-* JXP-*B SRE SP100 DC100 SLE-ADU Model FlexNet800 FlexNet700 E900 P/N Prefix FNT8 FNB8 E8 FNT7 FNB7 E9 E700 E7 Diamond Line I T3A & II Diamond Line G3A III GNA/TNA Table 8 Legacy C-COR & Philips RF Amplifiers Forward PADs Forward Equalizers Cable Simulators Return PADs SPB SEQ-862 SCS-862 SPB SEQ-750 RPB SEQPB SPB SEQ-750 SCS-862 SPB SEQPB RPB SPB SEQ-862 SCS-862 SPB SEQ-750 RPB SPB 10-A-WC SEQ-862 SEQ-750 SEQPB 7-2E862-WC 7-2E750-WC SCS-862 7-2E862C-WC SPB RPB 10-A-WC 10-A-WC 10-A-L 7-2E862-WC 7-2E750-WC 7-2E750 W/O 7-2E862C-WC 7-2E862C-W/O 10-A-WC 10-A-L Key Model Opti Max OM3101 Opti Max OM3100 Opti Max OM27411 Opti Max OM2100 Opti Max OM4000 N/A: not applicable W/O:without covers P/N Prefix Forward PADs WC:with covers Table 9 Legacy Optical Products Forward Equalizers Cable Simulators Return PADs OM31C OM31G OM27 OM21G OM41G 10-A-WC1 10-A-WC 9-A-S (RX only) NPB NPB Amini NPB GEQL-1GHZ-xxx-1 GEQL-870-xxx-1 GEQL-1GHZ-xxx-1 GEQL-870-xxx-1 GEQL-1GHZ GEQL-870 GEQC-1GHZ GEQC-870 SEQ-1G SEQ-870 SEQ-750 GEQL-1GHZ GEQL-870 NEQL-870 N/A N/A SCS-1G N/A N/A 10-A-WC 10-A-WC NPB NPB Amini NPB2 Return Equalizers MEQ-42, 55, 65, 85 MEQT-42, 85 MEQ-42, 55, 65, 85 MEQT-42, 85 MEQ-42, 55, 65, 85 MEQT-42, 85 MEQ-42, 55, 65, 85 MEQT-42, 85 7-REF42/x-WC 7-REF55/x-WC 7-REF65/x-WC 7-REF42/x-WC 7-REF55/x-WC 7-REF65/x-WC 7-REF42/x-WC 7-REF55/x-WC 7-REF65/x-WC Return Equalizers 7-DC-Series N/A S-Series NPB/Amini 7-DC-Series N/A Output Distribution Accessories S-Series S-Series N/A N/A 7-DC-Series N/A 7-DC-Series Output Distribution Accessories N/A N/A N/A N/A N/A 6 HFC Product Accessories Reference Guide 1513173 Rev C Table 9 Legacy Optical Products (cont'd) Model Opti Max OM3000 Opti Max OM20003 Opti Max OM1220 Opti Max OM1000 Optiworx ISX3040 Optiworx ISX3025 Optiworx ISX3030 LN-SM3x LN-SM7x P/N Prefix OM3 OM2 OM12 OM1 N/A N/A N/A N/A Forward PADs 10-A-WC 9-A-S (RX only) Amini Amini 10-A-WC IPADxxx TPADxxx IPB SPB Forward Equalizers 7-TG862-WC Amini N/A 7-2E862/x-WC ISX750EQyy ISX870EQyy IX7EQyy IX8EQyy ISX750EQyy N/A SEQ-750 Cable Simulators N/A N/A N/A 7-2E862C-WC N/A N/A N/A SCS-862 Return PADs 10-A-WC1 Amini Amini 10-A-WC1 IPADxxx TPADxxx N/A SPB BTN2000 N/A MBN100 N/A MPN100 N/A JXP-B* LME-100-* N/A VSN200 N/A SG1000 SG1 SG2000 SG2 JXP-*A SG2-FE-*/750 N/A SG2-FE-*/870 Harmonic HLN3142E HLN Harmonic HLN HLN3142 PWRBlazer II NPD38xx NLE31xx N/A Harmonic PWRBlazer HLN 3144 HLN NC2000 1GHz NC2 AP40xx EQ21xx (RF N/A Series module) EQ41xx (analog receivers) Key N/A: not applicable W/O:without covers WC:with covers JXP-B* JXP-*A NPD38xx AP40xx Return Equalizers N/A Amini N/A N/A ISX750EQyy ISX870EQyy IX7EQyy IX8EQyy ISX750EQyy N/A SM-MEQF42 MEQ-42 MEQT-42 N/A N/A NLE31xx N/A Output Distribution Accessories N/A N/A 7-DC-Series N/A N/A N/A S-Series S-Series N/A N/A N/A N/A 1. D30/47, D42/54, and D55/70 plug-in diplex filters are available. The original diplex filters were qualified for use in 870 MHz systems. The new diplex filters are qualified for use in 1 GHz systems. The new diplex filters have the same model numbers as the original diplex filters. 2. Noise Filter may be used in the Return PAD location. 3. Legacy D30/47, D42/54, and D55/70 plug-in diplex filters are available. Table 10 Legacy Motorola Taps Model BTTF*-*P 1GHz Taps FFT*-*P 1GHz Taps Cable Equalizers T-EQ-* T-EQ-* Cable Simulators T-CS-* T-CS-* Return Attenuators T-RPA/S-* T-RPA/S-* Plug-in Equalizer Board N/A N/A 1513173 Rev C HFC Product Accessories Reference Guide 7 Table 11 Legacy Accessories The following accessories are no longer available from ARRIS: 9A 9-A-S series attenuators have replaced the 9-A series attenuators. 9-A-WC 10-A-WC series attenuators have replaced the 9-A-WC series attenuators. 6-2E862 6-2E750 7-2E750C 7-2E862 forward equalizers may be used in place of 6-2E862 and 6-2E750 forward equalizers. The plastic cover must be removed from 7-series accessories to enable them to fit into equalizer locations designed for the 6-series accessories. PCS-1G and 7-2E862C forward cable simulators may be used in place of the 7-2E750C forward cable simulators. A862 Fixed attenuator for legacy FM220 Plus/FM500. No replacement. CE862 Cable simulator/equivalent for FM220 Plus/FM400/FM500. No replacement. CM862 Control module/system equalizer for FM400/FM500/OM2000. No replacement. D65/85 65/85MHz Diplex filter for FM220Plus/FM400/FM500/ OM1220/OM2000. No replacement. E606 Plug-in equalizer for FM400/FM500. No replacement. E862 Plug-in equalizer for FM220Plus/FM400/FM500. No replacement. IPB Amini PADs replace IPB style PADs (AT0xxx). SCS-750 SCS-862 forward cable simulators may be used in place of the SCS-750 forward cable simulators. FORWARD PATH ACCESSORIES Forward Path Attenuator Pads 9-A-S Forward/Return Attenuators Product Usage: Opti Max OM3100 (RX only), CHP Max5000 Single TX Legacy Product Usage: Opti Max3000 (RX only) Notes: 1. Height is 0.6", pin spacing is 0.125" 2. Molded blue plastic 3. Same footprint as Amini Short PADs but may be limited by height constraints Zero value is possible exception due to performance 10-A-L and 10-A-WC Forward/Return Attenuators Product Usage: 10-A-WC: Flex Max FM601e T/B/LE, Flex Max FM321e-LE, OptiMax OM3101, OptiMax OM3100, OptiMax OM1111 Legacy Product Usage: 10-A-L: GNA/TNA; 10-A-WC: Flex Max601 Bridger & Line Extender, Flex Max321, Flex Max320, Diamond Line I, II, & III, Opti Max3000, Opti Max1000 Notes: 1. Height is 1.15", pin spacing is 0.125" 2. 10-A-L: molded blue plastic without guide pins; 10-A-WC: molded blue plastic with guide pins 3. 10-A-WC cannot be plugged into products using NPB or Amini PADs because of guide pins 4. Same footprint as NPB and Amini PADs but may be limited by height constraints Zero value is possible exception due to performance Amini Attenuators Product Usage: Flex Max FM331-LE (interstage),Opti Max OM2100 Legacy Product Usage: Flex Max222, Flex Max220 Plus, Flex Max220 Basic, Flex Max500, Flex Max400, Opti Max2000, Opti Max1220 Notes: 1. Height is 1.0", pin spacing is 0.125". 2. Molded orange plastic 3. Can be plugged into Legacy Philips products using 10-A-WC attenuators, but no guiding mechanism 4. Same footprint as NPB and 10-A attenuators but may be limited by height constraints 8 HFC Product Accessories Reference Guide 1513173 Rev C Amini Short Attenuators Product Usage: CHP Dual Transmitter Notes: 1. Height is 0.5", pin spacing is 0.125" 2. Molded orange plastic 3. Same footprint as 9-A-S attenuators but may be limited by height constraints and lip around top of accessory AP-40xx-L Series Forward/Return Path Attenuators Product Usage: NC2000, NC4000 Notes: 1. Height is 1.0" 2. Molded orange plastic; orange color denotes 1200 MHz rating JXP Forward/Return Path Attenuators Product Usage: BLE100, MB100, MBV3, BT100, SLE100, SG4000, VSN Note: 1. Height is 1.375", pin spacing is 0.125" 2. Molded blue plastic NPB Forward/Return Path Attenuators Product Usage: Flex Max FM901e-T/B, Flex Max FM401, Flex Max FM331-LE, Opti Max OM4100, Trans Max TM4100, Opti Max OM2700, Opti Max OM2100 Legacy Product Usage: Flex Max901, Flex Max330, Flex Max222, Flex Max220 Plus, Flex Max220 Basic, Opti Max4000 Notes: 1. Height is 1.4", pin spacing is 0.125" 2. Molded green plastic 3. Same footprint as 10-A and Amini PADs but may be limited by height constraints NPD38xx Forward/Return Path Attenuators Legacy Product Usage: HLN3142, HLN3142E, HLN3144 Note: 1. 0.75 in. long 2. Molded yellow plastic. SEQPB-xx EQ Form Factor Attenuators Legacy Product Usage: Flex Max900, FlexNet 800, FlexNet 700, E700 Note: 1. Plugs into the equalizer location to add flat attenuation across the passband SPB-xxx Forward/Return Attenuators Legacy Product Usage: Flex Max900, Flex Max340, FlexNet 800, FlexNet 700, E900, E700, LN-SM7x Notes: 1. Height is 1.10", pin spacing is 0.20" 2. Molded green plastic 3. SPB-0 can be used as a jumper in the distribution accessory location for a single output THRM Thermal Attenuators Product Usage: Flex Max FM321e-LE, FM601e-B Legacy Product Usage: Flex Max320 Notes: 1. Blue plastic cover to protect components THRM Thermal Attenuators Product Usage: Flex Max FM601e-LE Notes: 1. No blue plastic cover. 1513173 Rev C HFC Product Accessories Reference Guide 9 Cable Simulators 7-2E862/Cx-WC Forward Path Cable Simulators Legacy Product Usage: Opti Max1000, Diamond Line I, II & III, GNA/TNA Notes: 1. Legacy Philips 2. Blue plastic cover to protect components 3. Can be used in GNA/TNA products with the cover removed. CBSM-1G Series Cable Simulators Legacy Product Usage: Flex Max FM401 Notes: 1. Height is 1.4" 2. Molded white plastic CE862/xx Cable Simulators (Equivalents) Legacy Product Usage: Flex Max FM220 Plus Note: 1. Blue plastic cover to protect components CS-120-* Cable Simulators Product Usage: BLE120, MB120 Notes: 1. Blue plastic cover to protect components 2. 1218 MHz upper bandwidth 3. Height is 1.2" PCS-1G-xx Cable Simulators Product Usage: Flex Max FM601e-T/B/LE, Flex Max FM321e-LE Legacy Product Usage: Flex Max FM601 Bridger & Line Extender, Flex Max FM321, Flex Max FM320 Note: 1. Blue plastic cover to protect components SCS Forward Cable Simulator Product Usage: BLE100, MB100, MBV3, BT100, SLE100 Notes: 1. STARLINE amplifiers 2. Blue plastic cover to protect components SCS-1G-xx Cable Simulators Product Usage: Flex Max FM901e-T/B, , Flex Max FM331-LE Legacy Product Usage: Flex Max FM901, Opti Max OM2700 Note: 1. Cannot be plugged into FM330 or Legacy C-COR Amps due to guide pins SCS862-xx Cable Simulators Legacy Product Usage: Flex Max FM900, Flex Max FM340, Flex Max FM330, FlexNet 800, FlexNet 700, E900, E700 Notes: 1. Legacy C-COR, produced with and without a white plastic cover to protect components 2. Fits in the Flex Max330 with the cover removed 10 HFC Product Accessories Reference Guide 1513173 Rev C T-CS-*-Q Series Forward Cable Simulator Product Usage: 12000-L-PBT, BTTF-*-*Q, FFT*-*Q Notes: 1. 1.2 GHz Taps 2. Blue plastic cover to protect components Forward Path Equalizers 7-2E862/x-WC, 7-2E750/x-WC Forward Path Cable Equalizers Product Usage: Flex Max FM601e-T/B/LE, Flex Max FM321e-LE Legacy Product Usage: Flex Max FM601 Bridger & Line Extender, Flex Max FM321, Flex Max FM320, Diamond Line I & II, Opti Max OM1000 Notes: 1. Legacy Philips 2. Blue plastic cover to protect components 7-REF65/x-WC, 7-REF55/x-WC, 7-REF42/x-WC Cable Equalizers Product Usage: Flex Max FM601e-T/B/LE, Flex Max FM321e-LE Legacy Product Usage: Flex Max FM601 Bridger & Line Extender, Flex Max FM321, Flex Max FM320, Diamond Line I, II, & III, GNA/TNA, Opti Max OM1000 Notes: 1. Legacy Philips 2. Blue plastic cover to protect components 7-TG862-WC Linear Equalizers Legacy Product Usage: Opti Max OM3000 Notes: 1. Legacy Philips 2. Blue plastic cover to protect components CE-120-* Forward Cable Equalizers Product Usage: BLE120, MB120 Notes: 1. Grey plastic cover to protect components 2. 1218 MHz upper bandwidth 3. Height is 1.2" CHP Plug-In Equalizers Product Usage: CHP Dual TX Notes: 1. Height is 0.6" 2. Molded white plastic E606/xx Series Equalizers Legacy Product Usage: Flex Max FM400, FM500 Notes: 1. Height is 1.4" E862xx Series Equalizers Legacy Product Usage: Flex Max FM220Plus, FM400, FM500 Notes: 1. Height is 1.4" Picture N/A Picture N/A 11 HFC Product Accessories Reference Guide 1513173 Rev C EQ21xx Series 870 MHz Linear Equalizers Product Usage: NC2000, NC4000 Notes: 1. Height is 1.0" 2. Molded purple plastic EQ21xxE Series 1.2 GHz Linear Equalizers Product Usage: NC2000, NC4000 Notes: 1. Height is 1.0" 2. Molded pink plastic EQ21xxG Series 1 GHz Linear Equalizers Product Usage: NC2000, NC4000 Notes: 1. Height is 1.4" 2. Molded red plastic. EQ41xx Series Equalizers Legacy Product Usage: NC2000 1 GHz Series Notes: 1. 0.834" x 0.703" 2. 45 to 870 MHz passband EQ41xxG Series Equalizers Legacy Product Usage: NC2000 1 GHz Series Notes: 1. 0.834" x 0.703" 2. 45 to 1002 MHz passband EQL-1220MHz-xx Series 1.2 GHz Linear Equalizers Product Usage: OM4120, OM6000 Notes: 1. Height is 1.4" 2. Molded gray plastic FEQC-750-xx Series Cable Equalizers Legacy Product Usage: Flex Max FM401 Notes: 1. Height is 1.4" 2. Molded seagull green plastic FEQC-870-xx Series Cable Equalizers Legacy Product Usage: Flex Max FM401 Notes: 1. Height is 1.4" 2. Molded banana yellow plastic FEQC-1G-xx Series Cable Equalizers Legacy Product Usage: Flex Max FM401 Notes: 1. Height is 1.4" 2. Molded royal blue plastic FLEQ Equalizers Product Usage: VTN244 Notes: 1. Height is 1.3" 2. Molded navy blue plastic 12 HFC Product Accessories Reference Guide 1513173 Rev C GEQC-870-xxx Cable Equalizers Product Usage: Flex Max FM901e-T (trunk only), Legacy Product Usage: Opti Max OM2700 Notes: 1. Needed to configure for an 870MHz system in the Flex Max FM901e-T trunk amplifier 2. Height is 1.4" 3. Molded blue plastic GEQC-1GHZ-xxx Cable Equalizers Product Usage: Flex Max FM901e-T (trunk only), Opti Max OM2700 Legacy Product Usage: Opti Max OM2700 Notes: 1. Needed to configure for a 1 GHz system in the Flex Max FM901e-T trunk amplifier 2. Height is 1.4" 3. Molded brown plastic GEQL-870-xxx Linear Equalizers Product Usage: Opti Max OM4100, Opti Max OM2700, Opti Max OM2100, Opti Max OM4120, Opti Max OM6000 Notes: 1. Height is 1.4", symmetrical pin spacing 2. Molded purple plastic 3. Can be plugged into NPB or 10-A style sockets GEQL-870-xxx-1 Linear Equalizers Product Usage: Opti Max OM3101, Opti Max OM3100, Opti Max OM1111 Notes: 1. Height is 1.0", symmetrical pin spacing 2. Molded purple plastic 3. Can be plugged into NPB or 10-A style sockets GEQL-1GHZ-xxx Linear Equalizers Product Usage: Flex Max FM901e -T Trunk (O/P only), Opti Max OM4100, Opti Max OM2700, Opti Max OM2100, Opti Max OM4120, Opti Max OM6000 Notes: 1. Height is 1.4", symmetrical pin spacing 2. Molded red plastic 3. Can be plugged into NPB or 10-A style sockets 4. 1 GHz "red" EQs can be used for 870 MHz bandwidth if the losses are acceptable GEQL-1GHZ-xxx-1 Linear Equalizers Product Usage: Opti Max OM3101, Opti Max OM3100, Opti Max OM1111 Notes: 1. Height is 1.0", symmetrical pin spacing 2. Molded red plastic 3. Can be plugged into NPB or 10-A style sockets 4. 1 GHz "red" EQs can be used for 870 MHz bandwidth if the losses are acceptable Ix7EQxx, Ix8EQxx Equalizers Product Usage: Optiworx ISX3025, ISX3040 Notes: 1. LME-87-* Linear Equalizers Product Usage: SG4000 Legacy Product Usage: BTN2000, MBN100, MPN100, VSN200, SG1000 Notes: 1. LME-100-* Linear Equalizers Product Usage: SG4000 Legacy Product Usage: BTN2000, MBN100, MPN100, VSN200, SG1000 Notes: 1. 13 HFC Product Accessories Reference Guide Picture N/A Picture N/A 1513173 Rev C NEQL-870-xx Linear Equalizers Legacy Product Usage: Opti Max OM4000 Notes: 1. Height is 1.4", non-symmetrical pin spacing 2. Molded yellow plastic NLE31xx Equalizers Legacy Product Usage: HLN3142, HLN3142E, HLN3144 Notes: 1. 0.9" x 0.8" x 0.9" PEQ-1G-xx Cable Equalizers Product Usage: Flex Max FM601e-T/B/LE, Flex Max FM321e-LE Legacy Product Usage: Flex Max601 Bridger & Line Extender, Flex Max321 Note: 1. Blue plastic cover to protect components SEQ750-xx Cable Equalizers Product Usage: Flex Max FM901e-T/B, Flex Max FM331-LE, Opti Max OM2700 Legacy Product Usage: Flex Max901, Flex Max900, Flex Max340, Flex Max330, Flex Net800, Flex Net 700, E900, E700, LNSM7x Notes: 1. Legacy C-COR, produced with and without a white plastic cover to protect components 2. Fits in the Flex Max FM331-LE, Flex Max901, and Flex Max330 with the cover removed SEQ862-xx Cable Equalizers Product Usage: Flex Max FM901e-T/B, Flex Max FM331-LE, Opti Max OM2700 Legacy Product Usage: Flex Max901, Flex Max900, Flex Max340, Flex Max330, Flex Net800, E900, E700 Notes: 1. Legacy C-COR, produced with and without a white plastic cover to protect components 2. Fits in the Flex Max FM331-LE, Flex Max901, and Flex Max330 with the cover removed SEQ-1GHz-xx Cable Equalizers Product Usage: Flex Max FM901e-T/B, Flex Max FM331-LE, Opti Max OM2700 Legacy Product Usage: Flex Max901 Note: 1. Cannot be plugged into Flex Max 900, Flex Max340, FlexMax330 or Legacy C-COR amps due to guide pins SFE-100 Forward Cable Equalizers Product Usage: BLE100, MB100, MBV3, BT100, SLE100 Note: 1. STARLINE amplifiers and FFE Series Equalizers 2. Blue plastic cover to protect components SG2-FE-*/750, SG2-FE-*/870 Forward Cable Equalizers Legacy Product Usage: SG2000 Note: 1. 2. Blue plastic cover to protect components T-EQ-*-Q Series Forward Cable Equalizer Product Usage: 12000-L-PBT, BTTF*-*Q, FFT*-*Q Note: 1. 1.2 GHz Taps 2. Blue plastic cover to protect components Picture N/A Picture N/A 1513173 Rev C HFC Product Accessories Reference Guide 14 Forward Path Frequency Split Upgrade Plug-ins 42/54 MHz Diplex Filter (p/n 1504997) Product Usage: Opti Max OM2741 Legacy Product Usage: Opti Max OM2700 Notes: 1. Included in OM27-42/54-DF-UPG-KIT upgrade kit (p/n 1510549-002) 85/102 MHz Diplex Filter (p/n 1508618) Product Usage: Opti Max OM2741 Legacy Product Usage: Opti Max OM2700 Notes: 1. Included in OM27-85/102-DF-UPG-KIT upgrade kit (p/n 1510549-001) 1508883 Series Diplex Filters Product Usage: Opti Max OM4120, OptiMax OM6000, STARLINE BLE120, STARLINE MB120 Notes: 1. Available for 42/54, 65/85, 85/102, and 204/258 MHz splits 2. Included in 1510253 series (for OM4120/OM6000 nodes), 1513727 series (for BLE120 amps), and 1513728 series (for MB120 amps) frequency split upgrade kits 531355 Series Diplex Filters Product Usage: SG4000, BT100, BLE100, SLE100, MB100, MBV3 Notes: 1. Available for 42/54, 65/85, and 85/102 MHz splits 2. SG4000 only: order with 555690-001, 555692-001, or 555694-001Return Path Low-Pass Filters 54 MHz Forward Path Roll-Off Compensation Board (p/n 1508229-001) Product Usage: Opti Max OM2741 Legacy Product Usage: Opti Max OM2700 Notes: 1. Included in OM27-85/102-DF-UPG-KIT upgrade kit (p/n 1510549-001) 102 MHz Forward Path Roll-Off Compensation Board (p/n 1508229-003) Product Usage: Opti Max OM2741 Legacy Product Usage: Opti Max OM2700 Notes: 1. Included in OM27-85/102-DF-UPG-KIT upgrade kit (p/n 1510549-001) 530653 Series FSB Roll Off Compensation Board Product Usage: SG4000 Notes: 1. For aligning the forward band when updating frequency splits 597696 Series Roll Off Compensation Board Product Usage: Opti Max OM4120, Opti Max OM6000 Notes: 1. For aligning the forward band when updating frequency splits 2. Included in 1510253 series frequency split upgrade kits 1513173 Rev C HFC Product Accessories Reference Guide 15 RETURN PATH ACCESSORIES Return Path Attenuator Pads 10-A-L and 10-A-WC Forward/Return Attenuators Product Usage: 10-A-WC: Flex Max FM601e T/B/LE, Flex Max FM321e-LE, , OptiMax OM1111 Legacy Product Usage: 10-A-L: GNA/TNA; 10-A-WC: Flex Max FM601 Bridger & Line Extender, Flex Max FM321, Flex Max FM320, Diamond Line I, II, & III, Opti Max OM3000, Opti Max OM1000, OptiMax OM3101, OptiMax OM3100 Notes: 1. Height is 1.15", pin spacing is 0.125" 2. 10-A-L: molded blue plastic without guide pins; 10-A-WC: molded blue plastic with guide pins 3. 10-A-WC cannot be plugged into products using NPB or Amini PADs because of guide pins 4. Same footprint as NPB and Amini PADs but may be limited by height constraints Zero value is possible exception due to performance 9-A-S Forward/Return Attenuators Product Usage: CHP Max5000 Single TX Legacy Product Usage: Opti Max3000 (RX only), Opti Max OM3100 (RX only) Notes: 1. Height is 0.6", pin spacing is 0.125" 2. Molded blue plastic 3. Same footprint as Amini Short PADs but may be limited by height constraints Zero value is possible exception due to performance Amini Attenuators Product Usage: Flex Max FM331-LE (interstage), Legacy Product Usage: Flex Max FM222, Flex Max FM220 Plus, Flex Max FM220 Basic, Flex Max FM500, Flex Max FM400, Opti Max OM2000, Opti Max OM1220, Opti Max OM2100 Notes: 1. Height is 1.0", pin spacing is 0.125". 2. Molded orange plastic 3. Can be plugged into Legacy Philips products using 10-A-WC attenuators, but no guiding mechanism 4. Same footprint as NPB and 10-A attenuators but may be limited by height constraints AP-40xx-L Series Forward/Return Path Attenuators Product Usage: NC2000, NC4000 Notes: 1. Height is 1.0" 2. Molded orange plastic JXP Forward/Return Path Attenuators Product Usage: BLE100, MB100, MBV3, BT100, SLE100, SG4000, VSN Note: 1. Height is 1.375", pin spacing is 0.125" 2. Molded blue plastic IPADxxx Return Path Attenuators Legacy Product Usage: Optiworx ISX3025, ISX3040 NPB Forward/Return Path Attenuators Product Usage: Flex Max FM901e-T/B, Flex Max FM331-LE, Opti Max OM4100, Trans Max TM4100 Legacy Product Usage: Flex Max FM901, Flex Max FM330, Flex Max FM222, Flex Max FM401, Flex Max FM220 Plus, Flex Max FM220 Basic, Opti Max OM2700, Opti Max OM2100, Opti Max OM4000 Notes: 1. Height is 1.4", pin spacing is 0.125" 2. Molded green plastic 3. Same footprint as 10-A and Amini PADs but may be limited by height constraints 16 HFC Product Accessories Reference Guide Picture N/A 1513173 Rev C NPD38xx Forward/Return Path Attenuators Legacy Product Usage: HLN3142, HLN3142E, HLN3144 Note: 1. 0.75 in. long 2. Molded yellow plastic. RPB-xxx Return Attenuators Legacy Product Usage: FlexNet 800, FlexNet 700, E900, E700 Notes: 1. Height is 1.10", pin spacing is 0.20" 2. Molded red plastic SPB-xxx Forward/Return Attenuators Legacy Product Usage: Flex Max900, Flex Max340, FlexNet 800, FlexNet 700, E900, E700, LN-SM7x Notes: 1. Height is 1.10", pin spacing is 0.20" 2. Molded green plastic 3. SPB-0 can be used as a jumper in the distribution accessory location for a single output T-RPA/*-* Series Return Path Attenuator Plug-in Modules Product Usage: 12000-L-PBT, BTTF*-*Q, FFT*-*Q Notes: 1. Height is 1.10", pin spacing is 0.20" 2. Molded green plastic 3. SPB-0 can be used as a jumper in the distribution accessory location for a single output Return Path Equalizers 7-REF65/x-WC, 7-REF55/x-WC, 7-REF42/x-WC Cable Equalizers Product Usage: Flex Max FM601e-T/B/LE, Flex Max FM321e-LE Legacy Product Usage: Flex Max601 Bridger & Line Extender, Flex Max321, Flex Max320, Diamond Line I, II, & III, GNA/TNA, Opti Max1000 Notes: 1. Legacy Philips 2. Blue plastic cover to protect components MEQ-42/MEQT-42, MEQ-55, MEQ-65, MEQ-85/MEQT-85 Cable Equalizers Product Usage: Flex Max FM901e-T/B Legacy Product Usage: Flex Max901 Trunk & Bridger, Flex Max900, Flex Max331, Flex Max340, Flex Net800, Flex Net700, E900, E700 Note: 1. White plastic cover to protect components ES-NLE31xx Series 1 GHz Equalizer Legacy Product Usage: HLN3842, HLN3844 1513173 Rev C HFC Product Accessories Reference Guide 17 REQC-42, REQC-65, REQC-85 Return Cable Equalizers Legacy Product Usage: Flex Max FM401 Notes: 1. Height is 1.4" 2. Molded light grey plastic SRE Return Cable Equalizers Product Usage: BLE100, MB100, MBV3, BT100, SLE100 Notes: 1. STARLINE amplifiers 2. Blue plastic cover to protect components Return Path Frequency Split Upgrade Plug-ins 42/54 MHz Diplex Filter (p/n 1504997) Product Usage: Opti Max OM2741 Legacy Product Usage: Opti Max OM2700 Notes: 1. Included in OM27-42/54-DF-UPG-KIT upgrade kit (p/n 1510549-002) 85/102 MHz Diplex Filter (p/n 1508618) Product Usage: Opti Max OM2741 Legacy Product Usage: Opti Max OM2700 Notes: 1. Included in OM27-85/102-DF-UPG-KIT upgrade kit (p/n 1510549-001) 1508883 Series Diplex Filters Product Usage: Opti Max OM4120, OptiMax OM6000 Notes: 1. Available for 42/54, 65/85, 85/102, and 204/258 MHz splits 2. Included in 1510253 series frequency split upgrade kits 531355 Series Diplex Filters Product Usage: SG4000, BT100, BLE100, SLE100, MB100, MBV3 Notes: 1. Available for 42/54, 65/85, and 85/102 MHz splits 2. SG4000 only: order with 555690-001, 555692-001, or 555694-001Return Path Low-Pass Filters 54 MHz Return Path Roll-Off Compensation Board (p/n 1506569-002) Product Usage: Opti Max OM2741 Legacy Product Usage: Opti Max OM2700 Notes: 1. Included in OM27-42/54-DF-UPG-KIT upgrade kit (p/n 1510549-001) 102 MHz Return Path Roll-Off Compensation Board (p/n 1506569-004) Product Usage: Opti Max OM2741 Legacy Product Usage: Opti Max OM2700 Notes: 1. Included in OM27-85/102-DF-UPG-KIT upgrade kit (p/n 1510549-001) 18 HFC Product Accessories Reference Guide 1513173 Rev C 555690-001, 555692-001, 555694-001 Series Return Path Low Pass Filter Product Usage: SG4000 Notes: 1. Available for 42/54, 65/85, and 85/102 MHz splits 2. Order with 531355 Series Diplex Filters 596605 Series Return Path Low Pass Filter (RPLPF) Product Usage: Opti Max OM4120, Opti Max OM6000 Notes: 1. Included in 1510253 series frequency split upgrade kits MISCELLANEOUS ACCESSORIES 7-DC-x-5-1000-WC Splitters and Directional Couplers (TAPs) Product Usage: Flex Max FM601e-T/B Legacy Product Usage: Flex Max FM601 Bridger, Flex Max FM222, Flex Max FM401, Diamond Line I & II, GNA/TNA, Opti Max OM1220, Opti Max OM2100, Opti Max OM3101 Note: 1. Blue cover to protect components and insertion guides CM862/xx System Equalizer Legacy Product Usage: Opti Max2000 D30/47, D42/54, D55/70, D65/85 Diplex Filters Legacy Product Usage: Flex Max FM500, Flex Max FM400, Flex Max FM220 Plus, Opti Max OM2100, Opti Max OM2000, Opti Max OM1220, Note: 1. Blue plastic cover to protect components G120-* Series Plug-In Equalizer Board Product Usage: FFE-*-120*/RP Note: 1. STARLINE amplifiers 2. Directional Coupler and Splitter Plugin 3. Blue plastic cover to protect components Ingress Noise Filter Product Usage: Flex Max FM901e-T/B, Flex Max FM601e-T/B/LE Legacy Product Usage: Flex Max901, Flex Max900, Flex Max601 Bridger & Line Extender, Flex Max222 , Flex Max220 Basic, Flex Max220 Plus, FlexNet 800, FlexNet 700, Flex Max500, Flex Max400, Opti Max4000, Opti Max3000, Opti Max1000 Notes: 1. Height is 1.182", pin spacing is 0.125" 2. Accessory for return attenuator (PAD) plug-in locations 3. In some cases, the ingress filter may have to be inserted or removed with needlenose pliers 1513173 Rev C HFC Product Accessories Reference Guide 19 SP-120, DC-120/* Distribution Accessories Product Usage: MB100, MB120 Notes: 1. Supports 1 GHz and 1.2 GHz operation 2. Directional Coupler and Splitter Plugin 3. Blue plastic cover to protect components SS/SDC-1000-xx Distribution Accessories Product Usage: Flex Max FM901e-T/B, Legacy Product Usage: Flex Max901, Flex Max 900, , FlexNet 700, FlexNet800, LN-SM3x, LN-SM7x, Opti Max OM2700 Notes: 1. Legacy C-COR 2. White plastic cover to protect components PADS (ATTENUATORS) SPECIFICATIONS PADs provide flat loss attenuation of RF signal across the entire passband. They are used in conjunction with equalizers to achieve proper amplifier forward output levels and return input levels. These PADs also have a fixed insertion loss regardless of frequency. SEQPB series PADs are PADs on an equalizer footprint and only work in the forward path. Amini series attenuators can be used in cabinet-mount equipment as both an attenuator and an equalizer depending upon the plug-in location. Table 12 9-A-S Series Forward/Return PAD Attenuators Specifications Model P/N 51002 MHz Flat Loss (dB) 9-A0-S 752501 0.0 9-A1-S 752509 1.0 9-A2-S 752515 2.0 9-A3-S 752520 3.0 9-A4-S 752523 4.0 9-A5-S 752526 5.0 9-A6-S 752529 6.0 9-A7-S 752533 7.0 9-A8-S 752537 8.0 9-A9-S 752541 9.0 9-A10-S 752545 10.0 Return Loss I/O @ 1000MHz: 20/20dB min. Passband Flatness (dB) ± 0.5 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 Model 9-A11-S 9-A12-S 9-A13-S 9-A14-S 9-A15-S 9-A16-S 9-A17-S 9-A18-S 9-A19-S 9-A-TERM-S P/N 752548 752550 752554 752558 752561 752564 752566 752568 752571 752587 51002 MHz Flat Loss (dB) 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 terminator Passband Flatness (dB) ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 -- Specification Document Number 871371 20 HFC Product Accessories Reference Guide 1513173 Rev C Table 13 10-A-L/10-A-WC Series Forward/Return PAD Attenuators Specifications Model P/N 10-A0.0-L 10-A1.0-L 10-A2.0-L 10-A3.0-L 10-A4.0-L 10-A5.0-L 10-A6.0-L 10-A7.0-L 10-A8.0-L 10-A9.0-L 10-A10.0-L 10-A11.0-L 10-A12.0-L 10-A13.0-L 10-A14.0-L 10-A15.0-L 10-A16.0-L 10-A17.0-L 10-A18.0-L 10-A19.0-L 10-A20.0-L 10-A21.0-L 10-A22.0-L 10-A23.0-L 10-A24.0-L 10-A25.0-L 10-A26.0-L 725816 726034 725852 725897 725832 725864 725964 725975 725880 725939 725901 725900 725881 725881 726036 726037 726038 726039 726040 726041 725436 725321 725490 725755 726042 725328 725644 51002 MHz Flat Loss (dB) 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 Passband Flatness (dB) ± 0.5 ± 0.1 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 Return Loss I/O @ 1000MHz: 20/20 dB min. Model P/N 10-A0.0-WC 10-A1.0-WC 10-A2.0-WC 10-A3.0-WC 10-A4.0-WC 10-A5.0-WC 10-A6.0-WC 10-A7.0-WC 10-A8.0-WC 10-A9.0-WC 10-A10.0-WC 10-A11.0-WC 10-A12.0-WC 10-A13.0-WC 10-A14.0-WC 10-A15.0-WC 10-A16.0-WC 10-A17.0-WC 10-A18.0-WC 10-A19.0-WC 10-A20.0-WC 10-A21.0-WC 10-A22.0-WC 10-A23.0-WC 10-A24.0-WC 10-A25.0-WC 10-A26.0-WC 10-A-TERM-WC 725464 725467 725463 725465 725468 725469 725466 725470 725667 725657 726033 725658 725659 725660 725661 725662 725663 725664 725665 725666 725461 725825 725962 725860 725830 726043 726044 51002 MHz Flat Loss (dB) Passband Flatness (dB) 0.0 ± 0.5 1.0 ± 0.1 2.0 ± 0.2 3.0 ± 0.2 4.0 ± 0.2 5.0 ± 0.2 6.0 ± 0.2 7.0 ± 0.2 8.0 ± 0.2 9.0 ± 0.2 10.0 ± 0.2 11.0 ± 0.2 12.0 ± 0.2 13.0 ± 0.2 14.0 ± 0.2 15.0 ± 0.2 16.0 ± 0.2 17.0 ± 0.2 18.0 ± 0.2 19.0 ± 0.2 20.0 ± 0.2 21.0 ± 0.2 22.0 ± 0.2 23.0 ± 0.2 24.0 ± 0.2 25.0 ± 0.2 26.0 ± 0.2 terminator -- Specification Document Number 871371 1513173 Rev C HFC Product Accessories Reference Guide 21 Table 14 Amini PAD Attenuators Specifications Model P/N Atten. 5862MHz Flat Loss in dB Forward Path EQ, 65/85MHz Insertion Loss in dB at Frequency (MHz) EQ Value in dB Return Path EQ, 65/85 MHz Insertion Loss in dB at Frequency (MHz) 85 862 5 65 Amini-0 724428 0.0 0.0 0.0 0.0 0.0 0.0 Amini-1 724423 1.0 .98 .23 .75 .99 .03 Amini-2 Amini-3 724558 724601 2.0 1.92 .40 1.52 1.97 .04 3.0 2.87 .51 2.36 2.94 .06 Amini-4 724632 4.0 4.06 .56 3.50 4.16 .08 Amini-5 Amini-6 724680 724627 5.0 4.81 .59 4.22 4.90 .09 6.0 5.82 .62 5.20 5.95 .10 Amini-7 724697 7.0 6.67 .62 6.05 6.84 .11 Amini-8 Amini-9 Amini-10 724689 724766 724769 8.0 9.0 10.0 7.67 8.58 9.49 .62 7.05 7.83 .12 .60 7.98 8.80 .13 .59 8.90 9.73 .14 Amini-11 Amini-12 Amini-13 724841 724800 724925 11.0 12.0 13.0 10.40 11.34 12.26 .60 9.80 10.68 .14 .58 10.76 11.61 .15 .56 11.70 12.57 .15 Amini-14 Amini-15 Amini-16 724865 724889 724906 14.0 15.0 16.0 13.11 13.99 14.88 .55 12.56 13.42 .16 .55 13.44 14.30 .16 .61 14.27 15.18 .17 Amini-17 Amini-18 Amini-19 725037 724943 724996 17.0 -- -- -- -- -- 18.0 -- -- -- -- -- 19.0 -- -- -- -- -- Amini-20 724957 20.0 -- -- -- -- -- Amini plug-ins can be used as both PADs and EQs in the Forward Path in the FM220 Basic and FM222 Amplifiers. All in orange plastic. EQ Value in dB 0.0 .96 1.93 2.88 4.08 4.81 5.85 6.73 7.71 8.67 9.59 10.54 11.46 12.42 13.26 14.14 15.01 -- -- -- -- Table 15 Amini Short PAD Attenuators Specifications P/N PAD Value P/N PAD Value P/N PAD Value P/N 725258 0.0 725455 6.0 724672 12.0 725919 725982 0.5 725972 6.5 726150 12.5 725857 725983 1.0 725990 7.0 724734 13.0 725976 725828 1.5 725991 7.5 725940 13.5 725804 725984 2.0 725020 8.0 724760 14.0 725956 725826 2.5 725992 8.5 725923 14.5 725859 725985 3.0 724802 9.0 724693 15.0 725902 725986 3.5 725936 9.5 725840 15.5 725935 725987 4.0 724615 10.0 725906 16.0 725915 725931 4.5 725993 10.5 725961 16.5 725916 725988 5.0 724678 11.0 725812 17.0 725894 725989 5.5 725783 11.5 725819 17.5 Amini Shorts are used in the CHP Max5000 Dual Input Transmitter and should be inserted with needle-nose pliers. All in orange plastic. PAD Value 18.0 18.5 19.0 19.5 20.0 20.5 21.0 21.5 22.0 22.5 23.0 22 HFC Product Accessories Reference Guide 1513173 Rev C Table 16 AP40xx Series Forward/Return Path PAD Attenuators Specifications Model/ Part Number AP4000-L AP4001-L AP4002-L AP4003-L AP4004-L AP4005-L AP4006-L AP4007-L AP4008-L AP4009-L AP4010-L Frequency Range: 5 to 1200 MHz Impedance: 75 ohm Return Loss: 20 dB (min.) All in orange plastic. dB Value (±0.3 dB) 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 Model AP4011-L AP4012-L AP4013-L AP4014-L AP4015-L AP4016-L AP4017-L AP4018-L AP-4075 dB Value (±0.3 dB) 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 75 ohm termination Table 17 Bridge and A862 Attenuators Specifications Model P/N PAD Value Bridge (A862/0) 724739 0 A862/02 725444 2 A862/04 725672 4 A862/05 778925 5 A862/06 725218 6 A862/08 725641 8 A862/10 725868 10 Dimensions, L x H: 30 x 37.7mm. All in blue plastic. Flatloss 5862MHz 0 2 4 5 6 8 10 Passband Flatness ± 0.15 dB ± 0.15 dB ± 0.15 dB ± 0.15 dB ± 0.15 dB ± 0.15 dB ± 0.15 dB Model JXP-0B-R JXP-1B-R JXP-2B-R JXP-3B-R JXP-4B-R Table 18 JXP Series Forward/Return PAD Attenuators Specifications Part Number 531186-001-00 531186-002-00 531186-003-00 531186-004-00 531186-005-00 5-1000 MHz Flat Loss 0 1 2 3 4 Passband Flatness ±0.5dB ±0.5dB ±0.5dB ±0.5dB ±0.5dB Model Part Number JXP-14B-R JXP-15B-R JXP-16B-R JXP-17B-R JXP-18B-R 531186-015-00 531186-016-00 531186-017-00 531186-018-00 531186-019-00 5-1000 MHz Flat Loss 14 15 16 17 18 Passband Flatness ±0.5dB ±0.5dB ±0.5dB ±0.5dB ±0.5dB 1513173 Rev C HFC Product Accessories Reference Guide 23 Model JXP-5B-R JXP-6B-R JXP-7B-R JXP-8B-R JXP-9B-R JXP-10B-R JXP-11B-R JXP-12B-R JXP-13B-R Table 18 JXP Series Forward/Return PAD Attenuators Specifications Part Number 531186-006-00 531186-007-00 531186-008-00 531186-009-00 531186-010-00 531186-011-00 531186-012-00 531186-013-00 531186-014-00 5-1000 MHz Flat Loss 5 6 7 8 9 10 11 12 13 Passband Flatness ±0.5dB ±0.5dB ±0.5dB ±0.5dB ±0.5dB ±0.5dB ±0.5dB ±0.5dB ±0.5dB Model Part Number JXP-19B-R JXP-20B-R JXP-21B-R JXP-22B-R JXP-23B-R JXP-24B-R JXP-25B-R JXP-26B-R 531186-020-00 531186-021-00 531186-022-00 531186-023-00 531186-024-00 531186-025-00 531186-026-00 531186-027-00 (cont'd) 5-1000 MHz Flat Loss 19 20 21 22 23 24 25 26 Passband Flatness ±0.5dB ±0.5dB ±0.5dB ±0.5dB ±0.5dB ±0.5dB ±0.5dB ±0.5dB Table 19 NPB Series Forward/Return Path PAD Attenuators Specifications Model/Part Number NPB-000 NPB-005 NPB-010 NPB-015 NPB-020 NPB-025 NPB-030 NPB-035 NPB-040 NPB-045 NPB-050 NPB-060 NPB-070 NPB-080 NPB-090 NPB-100 NPB-110 NPB-120 NPB-130 NPB-140 NPB-150 NPB-160 NPB-170 NPB-180 NPB-190 NPB-200 NPB-750 51200 MHz Flat Loss (dB) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 terminator 24 HFC Product Accessories Reference Guide Passband Flatness (dB) ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 ± 0.15 N/A 1513173 Rev C Table 19 NPB Series Forward/Return Path PAD Attenuators Specifications Model/Part Number 51200 MHz Flat Loss (dB) Flatness measured relative to a straight line at the listed dB value. Return Loss: 20 dB (51003 MHz); 25 dB (51250 MHz) Impedance: 75 ohm Temperature Range: 40ºC to 85ºC (40ºF to 185ºF) All in green plastic. (cont'd) Passband Flatness (dB) Table 20 NPD38xx Series Forward/Return Path PAD Attenuators Specifications Model/Part Number NPD3806 NPD3807 NPD3808 NPD3809 NPD3810 NPD3811 NPD3812 NPD3813 51002 MHz Flat Loss (dB) 6 7 8 9 10 11 12 13 Model/Part Number NPD3814 NPD3815 NPD3816 NPD3817 NPD3818 NPD3819 NPD3820 NPD3875 51002 MHz Flat Loss (dB) 14 15 16 17 18 19 20 Terminator Table 21 RPB Series Return PAD Attenuators (reverse SPB-style PAD) Specifications Model P/N RPB-21 RPB-22 RPB-23 726092 762235 762236 Passband Flatness: ±0.3dB Return Loss I/O: 25/25dB min. All in red plastic. 5200MHz Flat Loss (dB) 21.0 22.0 23.0' Model RPB-24 RPB-25 P/N 762237 762238 5200MHz Flat Loss (dB) 24.0 25.0 Specification Document Number 600701 1513173 Rev C HFC Product Accessories Reference Guide 25 Table 22 SEQPB Series EQ Form Factor PAD Attenuators Specifications Model P/N 51002MHz Flat Loss (dB) SEQPB-1000-01 725614 1.0 SEQPB-1000-02 762134 2.0 SEQPB-1000-03 762135 3.0 SEQPB-1000-04 762136 4.0 SEQPB-1000-05 726083 5.0 Passband Flatness: ±0.3dB Return Loss I/O: 19/19dB min. (SEQPB-01 to 06) 18.5/18.5dB min. (SEQPB-07 to 010) Slope: 0.2 to 0.7dB Model SEQPB-1000-06 SEQPB-1000-07 SEQPB-1000-08 SEQPB-1000-09 SEQPB-1000-10 P/N 51002MHz Flat Loss (dB) 762137 6.0 762138 7.0 726084 8.0 726085 9.0 762139 10.0 Specification Document Number 600668 Table 23 SPB Series Forward/Return PAD Attenuators Specifications Model P/N 51002 MHz Flat Loss (dB) SPB-0 162260-00 0.0 SPB-0.5 162260-005 0.5 SPB-1 162260-01 1.0 SPB-1.5 162260-015 1.5 SPB-2 162260-02 2.0 SPB-2.5 162260-025 2.5 SPB-3 162260-03 3.0 SPB-3.5 162260-035 3.5 SPB-4 162260-04 4.0 SPB-4.5 162260-045 4.5 SPB-5 162260-05 5.0 SPB-5.5 162260-055 5.5 SPB-6 162260-06 6.0 SPB-6.5 162260-065 6.5 Passband Flatness: ±0.3dB Return Loss I/O: 19/19dB min. All in green plastic. Model SPB-7 SPB-7.5 SPB-8 SPB-8.5 SPB-9 SPB-9.5 SPB-10 SPB-10.5 SPB-11 SPB-11.5 SPB-12 SPB-12.5 SPB-13 SPB-13.5 P/N 162260-07 162260-075 162260-08 162260-085 162260-09 162260-095 162260-10 162260-105 162260-11 162260-115 162260-12 162260-125 162260-13 162260-135 51002 MHz Flat Loss (dB) 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 Model P/N SPB-14 SPB-14.5 SPB-15 SPB-15.5 SPB-16 SPB-16.5 SPB-17 SPB-17.5 SPB-18 SPB-18.5 SPB-19 SPB-19.5 SPB-20 162260-14 162260-145 162260-15 162260-155 162260-16 162260-165 162260-17 162260-175 162260-18 162260-185 162260-19 162260-195 162260-20 51000 MHz Flat Loss (dB) 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0 Specification Document Number 600437 L Table 24 Thermal PAD Attenuators Specifications P/N PAD Value 753116 3 dB Passband Flatness: ±0.25dB Return Loss I/O: 17/17dB min. Insertion Loss@1002 MHz: 3.20 ±0.25 dB Covers are all in blue plastic. P/N 797584 (w/o cover) PAD Value 3 dB Specification Document Number 1503649 26 HFC Product Accessories Reference Guide 1513173 Rev C Table 25 T-RPA/*-* Series Return Path Attenuator Plug-in Modules Specifications Specification Freq T-RPA/42-2 T-RPA/42-4 T-RPA/42-6 T-RPA/42-8 T-RPA/42-10 T-RPA/42-12 T-RPA/42-14 T-RPA/42-16 T-RPA/42-18 (MHz) Return 542 2.5 4.5 6.5 8.5 10.5 12.5 14.5 16.5 18.5 Attenuation (dB nominal) Tolerance 530 1.0 1.0 1.0 1.0 1.0 1.4 1.6 1.6 2.1 (± dB max.) 3142 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.5 2.5 Drop Insertion 54 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 Loss1 100 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 (dB max.) 300 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 550 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 750 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 870 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 1000 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 1218 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 1The insertion loss specifications shown are in addition to the nominal tap value loss. Specification Freq T-RPA/85-2 T-RPA/852-4 T-RPA/85-6 T-RPA/85-8 T-RPA/85-10 T-RPA/85-12 T-RPA/85-14 T-RPA/85-16 T-RPA/85-18 (MHz) Return 585 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 Attenuation (dB nominal) Tolerance 550 1.5 1.5 1.5 1.5 1.5 1.5 1.8 2.0 2.0 (± dB max.) 5180 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 Drop Insertion 104 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 Loss1 106 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 (dB max.) 300 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 550 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 750 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 870 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 1000 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1218 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1The insertion loss specifications shown are in addition to the nominal tap value loss. 1513173 Rev C HFC Product Accessories Reference Guide 27 NOISE FILTER SPECIFICATIONS The Return Ingress Noise Filter is an ARRIS RF accessory for return attenuator (PAD) plug-in locations. This accessory not only suppresses signals below 10 MHz with at least 30 dB of attenuation but also passes signals above 15 MHz with minimal insertion loss. Ingress noise represents one of the major disturbances that affect upstream data transmission in broadband networks. This high pass filter prevents narrowband AM modulation carriers, such as short-wave radio signals, and any other interference from being introduced into the return path via an external source. Managing ingress noise in the return plant is crucial for data carrier performance, especially in broadband networks in which the return path is increasingly used for advanced services including video on demand and voice over IP. The ARRIS Return Ingress Noise Filter is a small, simple, yet vital component for implementing these services. Table 26 Return Ingress Noise Filter 15 MHz (P/N 724577) Specifications Characteristic RF impedance, Bandwidth, MHz Insertion Loss, dB 1520 MHz 20200 MHz Return Loss, dB min. Stop Band Bandwidth, MHz Attenuation, dB Physical and Environmental Characteristics Dimensions (w x h x d), mm Connector Temperature, °C Humidity, % Relative Humidity In some cases, the ingress filter may have to be inserted or removed with needlenose pliers. Specification 75 15200 < 1.50 < 1.00 -18 510 30 11 x 30 x 5 3 pin plug-in 40 to 85 595 Specification Document Number KR012940 Table 27 FM401 Return Ingress Noise Filter 15 MHz (P/N 789307) Specifications Characteristic RF impedance, Bandwidth, MHz Insertion Loss, dB 1520 MHz 20200 MHz Return Loss, dB min. Stop Band Bandwidth, MHz Attenuation, dB In some cases, the ingress filter may have to be inserted or removed with needlenose pliers. Specification 75 15200 < 1.50 < 1.00 -18 510 30 Specification Document Number 1505819 28 HFC Product Accessories Reference Guide 1513173 Rev C PLUG-IN EQUALIZERS SPECIFICATIONS Plug-in equalizers are available as either linear equalizers or cable equalizers, both of which provide attenuation of RF signals with the greatest attenuation occurring at the lowest rated frequency. Linear equalizers provide linear attenuation, while cable equalizers provide sloped attenuation. EQLs, EQ21xxEs, GEQLS, EQ21xxGs, EQ21xxs, NEQLs, and 7-TG862-WCs are linear equalizers. SEQs, 7-2E862/x-WCs, MEQs, MEQTs, and T-EQ-*s are cable equalizers. Equalizers are available as both fixed (GEQL, NEQL, SEQ, 7-TG-862-WC, and 7-2E862/x-WC, and MEQ series) or thermal (MEQT series). All except the MEQ and MEQT series provide equalization in the forward path. Thermal equalizers provide level control in addition to equalization by slope-compensated insertion loss that changes with temperature for the amount of cable equalized. Model 1300847 861020 861022 861024 1500944 Table 28 1GHz Equalizer for CHP MaxTM Headend Optics Platform Specifications P/N 758805 725106 725107 725000 725291 Value 0 0.5 1.0 1.5 3.0 Table 29 7-2E862/x-WC Forward Path Cable Equalizers Specifications Model 7-2E862/1-WC 7-2E862/2-WC 7-2E862/3-WC 7-2E862/4-WC 7-2E862/5-WC 7-2E862/6-WC 7-2E862/7-WC 7-2E862/8-WC 7-2E862/9-WC 7-2E862/10-WC 7-2E862/11-WC 7-2E862/12-WC 7-2E862/13-WC 7-2E862/14-WC 7-2E862/15-WC 7-2E862/16-WC 7-2E862/17-WC 7-2E862/18-WC 7-2E862/19-WC 7-2E862/20-WC 7-2E862/21-WC 7-2E862/22-WC P/N 2500808 2500809 2500810 2500811 2500812 2500813 2500814 2500815 2500816 2500817 2500818 2500819 2500820 2500821 2500822 2500823 2500824 2500825 2500981 2500978 2500982 2500983 Insertion Loss in dB at Frequency (MHz) 54 70 85 450 550 650 750 870 1.3 1.2 1.2 0.8 0.7 0.6 0.6 0.5 2.0 2.0 1.9 1.1 0.9 0.8 0.7 0.5 2.8 2.7 2.6 1.4 1.2 0.9 0.7 0.5 3.6 3.5 3.4 1.7 1.4 1.1 0.8 0.5 4.4 4.2 4.1 2.0 1.6 1.2 0.9 0.5 5.1 5.0 4.8 2.3 1.8 1.4 1.0 0.5 5.9 5.7 5.5 2.6 2.1 1.5 1.0 0.5 6.7 6.4 6.2 2.9 2.3 1.7 1.1 0.5 7.4 7.2 6.9 3.2 2.5 1.8 1.2 0.5 8.2 7.9 7.6 3.5 2.7 2.0 1.3 0.4 9.0 8.7 8.4 3.8 2.9 2.1 1.3 0.4 9.8 9.4 9.1 4.1 3.2 2.3 1.4 0.4 10.5 10.1 9.8 4.4 3.4 2.4 1.5 0.4 11.3 10.9 10.5 4.8 3.6 2.6 1.6 0.4 12.1 11.6 11.2 5.1 3.8 2.7 1.6 0.4 13.1 12.6 12.2 5.6 4.3 3.1 2.0 0.7 13.9 13.4 12.9 5.9 4.5 3.2 2.0 0.7 14.6 14.1 13.6 6.2 4.8 3.4 2.1 0.7 15.4 14.8 14.3 6.5 5.0 3.5 2.2 0.7 16.2 15.6 15.0 6.8 5.2 3.7 2.3 0.6 17.0 16.3 15.7 7.1 5.4 3.8 2.3 0.6 17.7 17.1 16.5 7.4 5.6 4.0 2.4 0.6 1513173 Rev C HFC Product Accessories Reference Guide 29 Table 29 7-2E862/x-WC Forward Path Cable Equalizers Specifications Model 7-2E862/23-WC 7-2E862/24-WC 7-2E862/25-WC 7-2E862/26-WC P/N 2500979 2500984 2500985 2500980 54 18.5 19.3 20.1 20.8 70 17.8 18.6 19.3 20.0 Insertion Loss in dB at Frequency (MHz) 85 450 550 650 17.2 7.7 5.9 4.1 17.9 8.0 6.1 4.3 18.6 8.3 6.3 4.4 19.3 8.6 6.5 4.6 (cont'd) 750 870 2.5 0.6 2.6 0.6 2.6 0.6 2.7 0.6 Table 30 7-REF42/x-WC Return Cable Equalizers Specifications Model P/N PAD Value Insertion Loss in dB at Frequency (MHz) 7-REF42/1-WC 724826 7-REF42/2-WC 724727 7-REF42/3-WC 724897 7-REF42/4-WC 724819 7-REF42/5-WC 724951 7-REF42/6-WC 724872 7-REF42/7-WC 724866 7-REF42/8-WC 724881 7-REF42/9-WC 725029 All in blue plastic. 5 7 13 19 25 33 42 1 1.4 1.3 1.1 1.0 0.9 0.8 0.7 2 1.8 1.7 1.4 1.1 1.0 0.8 0.7 3 2.6 2.4 2.0 1.6 1.4 1.0 0.7 4 3.4 3.1 2.6 2.2 1.7 1.2 0.7 5 4.1 3.7 3.1 2.5 2.0 1.4 0.7 6 4.6 4.1 3.4 2.7 2.2 1.3 0.7 7 5.3 5.0 4.0 3.2 2.4 1.5 0.7 8 6.0 5.4 4.2 3.5 2.6 1.6 0.7 9 6.6 5.8 4.7 3.7 2.7 1.7 0.7 Table 31 7-REF55/x-WC Return Cable Equalizers Specifications Model P/N PAD Value Insertion Loss in dB at Frequency (MHz) 5 7 13 19 25 33 42 49 55 7-REF55/1-WC 762590 1 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 7-REF55/2-WC 762591 2 1.8 1.7 1.5 1.3 0.9 0.7 0.6 0.5 0.4 7-REF55/3-WC 762592 3 2.3 2.2 1.8 1.5 1.3 0.9 0.6 0.3 0.4 7-REF55/4-WC 762593 4 3.3 3.0 2.6 2.2 1.8 1.4 1.0 0.8 0.5 7-REF55/5-WC 762594 5 4.1 3.8 3.2 2.7 2.2 1.7 1.2 0.9 0.5 7-REF55/6-WC 762595 6 4.8 4.4 3.7 3.0 2.5 2.0 1.3 0.9 0.5 7-REF55/7-WC 762596 7 5.2 4.8 3.9 3.2 2.7 2.1 1.4 1.0 0.5 7-REF55/8-WC 762597 8 6.2 5.7 4.7 4.0 3.2 2.4 1.6 1.0 0.6 7-REF55/9-WC 762598 9 6.9 6.3 5.3 4.4 3.5 2.7 1.8 1.3 0.6 7-REF55/10-WC 762599 10 7.6 7.0 5.7 4.8 3.7 2.9 1.9 1.3 0.6 All in blue plastic. 30 HFC Product Accessories Reference Guide 1513173 Rev C Table 32 7-REF65/x-WC Return Cable Equalizers Specifications Model P/N PAD Value Insertion Loss in dB at Frequency (MHz) 7-REF65/1-WC 725750 1 7-REF65/2-WC 725785 2 7-REF65/3-WC 726028 3 7-REF65/4-WC 725677 4 7-REF65/5-WC 762600 5 7-REF65/6-WC 726029 6 7-REF65/7-WC 726030 7 7-REF65/8-WC 726031 8 7-REF65/9-WC 762601 9 7-REF65/10-WC 762602 10 7-REF65/11-WC 762603 11 All in blue plastic. 5 8 20 29 36 42 56 63 65 1.3 1.2 1.0 0.9 0.8 0.7 0.6 0.6 0.6 2.1 1.9 1.5 1.3 1.2 1.0 0.7 0.7 0.6 2.7 2.5 2.2 1.9 1.5 1.1 0.7 0.7 0.6 3.5 3.2 2.7 2.4 1.9 1.3 0.8 0.7 0.6 4.2 3.8 3.2 2.5 2.1 1.5 0.9 0.7 0.6 4.8 4.1 3.2 2.8 2.2 1.6 1.1 0.7 0.6 5.8 5.3 3.9 3.0 2.5 2.1 1.3 0.9 0.6 6.5 5.8 4.2 3.6 2.7 2.2 1.3 1.0 0.6 6.9 6.2 5.0 3.8 3.0 2.2 1.4 1.0 0.6 8.0 7.1 5.2 1.0 3.2 2.7 1.5 1.0 0.6 8.6 7.9 5.6 4.4 3.4 2.8 1.5 1.0 0.6 Table 33 7-REF85/x-WC Return Cable Equalizers Specifications Model P/N PAD Value Insertion Loss in dB at Frequency (MHz) 5 8 20 29 36 42 56 63 65 7-REF85/1-WC 787588 1 1.3 1.2 1.0 0.9 0.8 0.7 0.6 0.6 0.6 7-REF85/2-WC 787589 2 2.1 1.9 1.5 1.3 1.2 1.0 0.7 0.7 0.6 7-REF85/3-WC 787590 3 2.7 2.5 2.2 1.9 1.5 1.1 0.7 0.7 0.6 7-REF85/4-WC 787591 4 3.5 3.2 2.7 2.4 1.9 1.3 0.8 0.7 0.6 7-REF85/5-WC 787592 5 4.2 3.8 3.2 2.5 2.1 1.5 0.9 0.7 0.6 7-REF85/6-WC 787593 6 4.8 4.1 3.2 2.8 2.2 1.6 1.1 0.7 0.6 7-REF85/7-WC 787594 7 5.8 5.3 3.9 3.0 2.5 2.1 1.3 0.9 0.6 7-REF85/8-WC 787595 8 6.5 5.8 4.2 3.6 2.7 2.2 1.3 1.0 0.6 All in blue plastic. Model 7-TG862/5-WC 7-TG862/6-WC 7-TG862/7-WC 7-TG862/8-WC 7-TG862/9-WC 7-TG862/10-WC Table 34 7-TG862-WC Series Linear Equalizers Specifications P/N 724909 725727 725457 725410 725575 725575 Insertion Loss in dB at Frequency (MHz) 50 862 5.0 1.0 6.0 1.0 7.0 1.0 8.0 1.0 9.0 1.0 10.0 1.0 Tilt in dB 45 to 890MHz 5.20 6.24 7.28 8.33 9.37 10.41 1513173 Rev C HFC Product Accessories Reference Guide 31 Table 34 7-TG862-WC Series Linear Equalizers Specifications (cont'd) Model P/N 7-TG862/11-WC 725605 7-TG862/12-WC 725515 7-TG862/13-WC 725476 7-TG862/14-WC 725737 7-TG862/15-WC 725820 Passband Flatness: ±0.2dB Return loss I/O: 18/18dB min. Insertion Loss in dB at Frequency (MHz) 50 862 11.0 1.0 12.0 1.0 11.0 1.0 12.0 1.0 11.0 1.0 Tilt in dB 45 to 890MHz 11.45 12.49 13.52 14.57 15.61 Specification Document Number 871539 Table 35 CBSM-1GHz Series Cable Equalizers Specifications Picture N/A Model P/N CBSM-1G-03 728226 CBSM-1G-05 728227 CBSM-1G-07 728228 CBSM-1G-09 728229 Return Loss I/O: 22/22dB min. Tolerance: ±0.3dB Insertion Loss in dB at Frequency (MHz) 47 100 200 300 400 500 600 700 800 900 1000 0.80 1.04 1.36 1.61 1.83 3.02 2.19 2.36 2.51 2.66 2.80 0.80 1.28 1.92 2.42 2.85 3.24 3.59 3.92 4.22 4.52 4.80 0.80 1.51 2.48 3.23 3.88 4.45 4.98 5.47 5.94 6.37 6.80 0.80 1.75 3.03 4.04 4.90 5.67 6.38 7.03 7.65 8.23 8.80 Specification Document Number 1505004 Part Number CE-120-1 CE-120-2 CE-120-3 CE-120-4 CE-120-5 CE-120-6 CE-120-7 CE-120-8 CE-120-9 CE-120-10 CE-120-11 Table 36 CE-120-* 1.2 GHz Forward Cable Equalizer Specifications Insertion Loss Over Frequency Frequency (dB) 54 MHz 70 MHz 86 MHz 105 MHz 1 1.7 1.7 1.6 1.6 2 2.7 2.6 2.6 2.5 3 3.7 3.6 3.5 3.4 4 4.7 4.6 4.5 4.3 5 5.7 5.5 5.2 5.2 6 6.7 6.5 6.3 6.1 7 7.7 7.5 7.3 7.0 8 8.7 8.4 8.2 8.0 9 9.7 9.4 9.2 8.9 10 10.7 10.4 10.1 9.8 11 11.7 11.3 11.0 10.7 204 MHz 1.5 2.2 3.0 3.8 4.6 5.3 6.1 6.9 7.7 8.4 9.2 258 MHz 1.4 2.1 2.8 3.6 4.3 5.0 5.7 6.4 7.1 7.8 8.5 550 MHz 1.1 1.6 2.0 2.5 2.9 3.4 3.8 4.3 4.7 5.2 5.6 600 MHz 1.1 1.5 1.9 2.3 2.7 3.2 3.6 4.0 4.4 4.8 5.2 650 MHz 1.1 1.4 1.8 2.2 2.6 2.9 3.3 3.7 4.0 4.4 4.8 750 MHz 1.0 1.3 1.6 1.9 2.2 2.5 2.8 3.1 3.4 3.7 4.0 870 MHz 0.9 1.1 1.4 1.6 1.8 2.0 2.2 2.4 2.7 2.9 3.1 1002 MHz 0.8 1.0 1.1 1.2 1.4 1.5 1.6 1.8 1.9 2.0 2.1 1100 MHz 0.8 0.8 0.9 1.0 1.1 1.1 1.2 1.3 1.3 1.4 1.5 1218 MHz 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 32 HFC Product Accessories Reference Guide 1513173 Rev C Part Number CE-120-12 CE-120-13 CE-120-14 CE-120-15 CE-120-16 CE-120-17 CE-120-18 CE-120-19 CE-120-20 Table 36 CE-120-* 1.2 GHz Forward Cable Equalizer Specifications Insertion Loss Over Frequency Frequency (dB) 54 MHz 70 MHz 86 MHz 105 MHz 204 MHz 258 MHz 12 12.7 12.3 12.0 11.6 10.0 9.3 13 13.7 13.3 12.9 12.5 10.8 10.0 14 14.7 14.3 13.8 13.4 11.5 10.7 15 15.7 15.2 14.8 14.3 12.3 11.4 16 16.7 16.2 15.7 15.2 13.1 12.1 17 17.7 17.2 16.7 16.1 13.8 12.8 18 18.7 18.1 17.6 17.0 14.6 13.5 19 19.7 19.1 18.5 17.9 15.4 14.2 20 20.7 20.1 19.5 18.8 16.2 15.0 550 MHz 6.1 6.5 7.0 7.4 7.9 8.3 8.8 9.2 9.7 600 MHz 5.6 6.0 6.4 6.8 7.2 7.7 8.1 8.5 8.9 650 MHz 5.2 5.5 5.9 6.3 6.6 7.0 7.4 7.8 8.1 750 MHz 4.3 4.6 4.9 5.2 5.5 5.8 6.1 6.4 6.7 (cont'd) 870 MHz 3.3 3.5 3.7 4.0 4.2 4.4 4.6 4.8 5.0 1002 MHz 2.3 2.4 2.5 2.7 2.8 2.9 3.1 3.2 3.3 1100 MHz 1.5 1.6 1.7 1.8 1.8 1.9 2.0 2.0 2.1 1218 MHz 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 Part Number CS-120-1 CS-120-2 CS-120-3 CS-120-4 CS-120-5 CS-120-6 CS-120-7 CS-120-8 CS-120-9 CS-120-10 Table 37 CS-120-* 1.2 GHz Cable Simulator Specifications Insertion Loss Over Frequency Frequency (dB) 1 2 3 4 5 6 7 8 9 10 54 70 86 105 204 258 550 MHz MHz MHz MHz MHz MHz MHz 0.7 0.7 0.8 0.8 0.9 1.0 1.3 0.7 0.8 0.8 0.9 1.2 1.3 1.8 0.7 0.8 0.9 1.0 1.4 1.6 2.4 0.7 0.8 0.9 1.1 1.6 1.9 2.9 0.7 0.9 1.0 1.2 1.8 2.1 3.5 0.7 0.9 1.1 1.3 2.1 2.4 4.0 0.7 0.9 1.1 1.3 2.3 2.7 4.6 0.7 1.0 1.2 1.4 2.5 3.0 5.1 0.7 1.0 1.3 1.5 2.7 3.3 5.7 0.7 1.0 1.3 1.6 3.0 3.6 6.2 600 MHz 1.3 1.9 2.5 3.1 3.7 4.2 4.8 5.4 6.0 6.6 650 MHz 1.3 2.0 2.6 3.2 3.8 4.5 5.1 5.7 6.4 7.0 750 MHz 1.4 2.1 2.8 3.5 4.2 4.9 5.6 6.3 7.0 7.7 870 MHz 1.5 2.3 3.0 3.8 4.6 5.4 6.2 7.0 7.7 8.5 1002 MHz 1.6 2.4 3.3 4.2 5.0 5.9 6.8 7.6 8.5 9.4 1100 1218 MHz MHz 1.6 1.7 2.6 2.7 3.5 3.7 4.4 4.7 5.3 5.7 6.3 6.7 7.2 7.7 8.1 9.1 10.0 8.7 9.7 10.7 1513173 Rev C HFC Product Accessories Reference Guide 33 Table 38 E606 Series Cable Equalizer Specifications Picture N/A Model P/N PH0.42171 725829 PH0.42161 725912 PH0.42151 725836 PH0.41052 725898 PH0.41062 725872 PH0.41072 725945 PH0.41082 725834 PH0.41092 725879 Passband Flatness: ±0.2dB Return Loss: <20dB (47MHz)1.5dB/oct. Dimensions in L x H: 30 x 37.7mm All in blue plastic. PAD Value 2 4 6 8 10 12 14 16 Insertion Loss in dB at Frequency (MHz) 47 606 2 1 4 1 6 1 8 1 10 1 12 1 14 1 16 1 Table 39 E862 Series Cable Equalizers Specifications Model P/N E862/02 724767 E862/04 724862 E862/06 724718 E862/08 724580 E862/10 724993 E862/12 725063 E862/14 725122 E862/16 725227 Passband Flatness: ±0.2dB Return Loss: <20dB (47MHz)1.5dB/oct. Insertion Loss in dB at Frequency (MHz) 47 862 2 1 4 1 6 1 8 1 10 1 12 1 14 1 16 1 Model EQ2100 EQ2102 EQ2103 EQ2104 EQ2105 EQ2106 EQ2107 Table 40 EQ21xx Series Linear Equalizers Specifications Insertion Loss in dB at Frequency (MHz) 45 70 80 100 300 400 500 600 700 800 870 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 2.0 2.0 2.0 1.9 1.7 1.6 1.4 1.3 1.2 1.1 1.0 3.0 2.9 2.9 2.9 2.4 2.1 1.9 1.7 1.4 1.2 1.0 4.0 3.9 3.9 3.8 3.1 2.7 2.3 2.0 1.6 1.3 1.0 5.0 4.9 4.8 4.7 3.8 3.3 2.8 2.3 1.8 1.3 1.0 6.0 5.8 5.8 5.7 4.5 3.8 3.2 2.6 2.0 1.4 1.0 7.0 6.8 6.7 6.6 5.1 4.4 3.7 3.0 2.2 1.5 1.0 34 HFC Product Accessories Reference Guide 1513173 Rev C Table 40 EQ21xx Series Linear Equalizers Specifications (cont'd) Model Insertion Loss in dB at Frequency (MHz) 45 70 80 100 300 400 500 600 EQ2108 8.0 7.8 7.7 7.5 5.8 5.0 4.1 3.3 EQ2109 9.0 8.8 8.7 8.5 6.5 5.6 4.6 3.6 EQ2110 EQ2111 EQ2112 10.0 9.7 9.6 9.4 7.2 6.1 5.0 3.9 11.0 10.7 10.6 10.3 7.9 6.7 5.5 4.3 12.0 11.7 11.5 11.3 8.6 7.3 5.9 4.6 EQ2113 EQ2114 EQ2115 13.0 12.6 12.5 12.2 9.3 7.8 6.4 4.9 14.0 13.6 13.4 13.1 10.0 8.4 6.8 5.3 15.0 14.6 14.4 14.1 10.7 9.0 7.3 5.6 EQ2116 EQ2117 EQ2118 16.0 15.5 15.4 15.0 11.4 9.5 7.7 5.9 17.0 16.5 16.3 15.9 12.1 10.1 8.2 6.2 18.0 17.5 17.3 16.9 12.7 10.7 8.6 6.6 EQ2119 EQ2120 EQ2121 19.0 18.5 18.2 17.8 13.4 11.3 9.1 6.9 20.0 19.4 19.2 18.7 14.1 11.8 9.5 7.2 21.0 20.4 20.2 19.7 14.8 12.4 10.0 7.5 Passband Flatness: ±0.3dB Insertion Loss: 1 dB Impedance: 75 ohms Flatness measured with respect to slope. Return Loss I/O: 18/18 dB min. All in purple plastic. 700 800 870 2.4 1.6 1.0 2.6 1.7 1.0 2.9 1.8 1.0 3.1 1.8 1.0 3.3 1.9 1.0 3.5 2.0 1.0 3.7 2.1 1.0 3.9 2.2 1.0 4.1 2.3 1.0 4.3 2.4 1.0 4.5 2.4 1.0 4.7 2.5 1.0 4.9 2.6 1.0 5.1 2.7 1.0 Table 41 EQ21xxE Series Linear Equalizers Specifications Model EQ2102E EQ2103E EQ2104E EQ2105E EQ2106E EQ2107E EQ2108E EQ2109E EQ2110E EQ2111E EQ2112E Passband Flatness: 0.3 Flatness measured with respect to slope. Return Loss I/O: 20 dB min./22 dB max. All in pink plastic. Insertion Loss in dB at Frequency (MHz) 45 2.6 3.6 4.6 5.6 6.6 7.6 8.6 9.6 10.6 11.6 12.6 1220 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 1513173 Rev C HFC Product Accessories Reference Guide 35 Table 42 EQ21xxG Series Linear Equalizers Specifications Model Insertion Loss in dB at Frequency (MHz) 45 70 100 300 400 500 600 700 800 900 1000 EQ2100G 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 EQ2102G 2.0 2.0 1.9 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 EQ2103G EQ2104G 3.0 2.9 2.9 2.5 2.3 2.0 1.8 1.6 1.4 1.2 1.0 4.0 3.9 3.8 3.2 2.9 2.6 2.3 1.9 1.6 1.3 1.0 EQ2105G 5.0 4.9 4.8 3.9 3.5 3.1 2.7 2.3 1.8 1.4 1.0 EQ2106G EQ2107G 6.0 5.9 5.7 4.7 4.1 3.6 3.1 2.6 2.0 1.5 1.0 7.0 6.8 6.7 5.4 4.8 4.1 3.5 2.9 2.3 1.6 1.0 EQ2108G 8.0 7.8 7.6 6.1 5.4 4.7 3.9 3.2 2.5 1.7 1.0 EQ2109G EQ2110G 9.0 8.8 8.5 6.9 6.0 5.2 4.4 3.5 2.7 1.8 1.0 10.0 9.8 9.5 7.6 6.7 5.7 4.8 3.8 2.9 1.9 1.0 EQ2111G 11.0 10.7 10.4 8.3 7.3 6.2 5.2 4.1 3.1 2.0 1.0 EQ2112G EQ2113G 12.0 11.7 11.4 9.1 7.9 6.8 5.6 4.5 3.3 2.2 1.0 13.0 12.7 12.3 9.8 8.5 7.3 6.0 4.8 3.5 2.3 1.0 EQ2114G 14.0 13.7 13.3 10.5 9.2 7.8 6.4 5.1 3.7 2.4 1.0 EQ2115G EQ2116G 15.0 14.6 14.2 11.3 9.8 8.3 6.9 5.4 3.9 2.5 1.0 16.0 15.6 15.1 12.0 10.4 8.9 7.3 5.7 4.1 2.6 1.0 EQ2117G 17.0 16.6 16.1 12.7 11.1 9.4 7.7 6.0 4.4 2.7 1.0 EQ2118G EQ2119G 18.0 17.6 17.0 13.5 11.7 9.9 8.1 6.3 4.6 2.8 1.0 19.0 18.5 18.0 14.2 12.3 10.4 8.5 6.7 4.8 2.9 1.0 EQ2120G 20.0 19.5 18.9 14.9 12.9 10.9 9.0 7.0 5.0 3.0 1.0 Passband Flatness: ±0.3dB Insertion Loss: 1 dB Impedence: 75 ohms Flatness measured with respect to slope. Return Loss I/O: 18/18 dB min. All in red plastic. Model EQ4100 EQ4101 EQ4102 EQ4103 EQ4104 EQ4105 EQ4106 EQ4107 EQ4108 EQ4109 EQ4110 EQ4111 Table 43 EQ41xx Series Linear Equalizers Specifications Insertion Loss in dB at Frequency (MHz) 54 550 0.1 0.1 1.2 0.8 2.0 1.0 3.4 1.8 4.6 2.4 5.6 2.8 6.7 3.2 7.8 3.7 9.0 4.1 10.1 4.6 11.3 5.0 12.5 5.3 36 HFC Product Accessories Reference Guide 870 0.1 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1513173 Rev C Table 43 EQ41xx Series Linear Equalizers Specifications (cont'd) Model EQ4112 Insertion Loss: 1 dB Frequency Response: ±0.3 dB, max. Return Loss I/O: 18 dB min. Insertion Loss in dB at Frequency (MHz) 54 550 870 13.4 5.7 1.0 Table 44 EQ41xxG Series Linear Equalizers Specifications Model EQ4100G EQ4101G EQ4102G EQ4103G EQ4104G EQ4105G EQ4106G EQ4107G EQ4108G EQ4109G EQ4110G EQ4111G EQ4112G EQ4113G Insertion Loss: 1 dB Frequency Response: ±0.3 dB, max. Return Loss I/O: 18 dB min. Insertion Loss in dB at Frequency (MHz) 54 550 870 0.1 0.1 0.1 1.2 0.8 0.5 2.0 1.0 0.5 3.4 1.8 0.7 4.6 2.4 1.0 5.6 2.8 1.0 6.7 3.3 1.0 7.8 3.9 1.4 9.0 4.4 1.5 10.1 5.0 1.8 11.3 5.5 1.9 12.5 6.0 2.0 13.5 6.5 2.2 14.5 6.6 2.0 1003 0.1 0.3 0.3 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Table 45 EQL-1220MHz-xx Series Linear Equalizers Specifications Model EQL-1220MHz-01 EQL-1220MHz-02 EQL-1220MHz-03 EQL-1220MHz-04 EQL-1220MHz-05 EQL-1220MHz-06 EQL-1220MHz-07 EQL-1220MHz-08 EQL-1220MHz-09 P/N 1510053-001 1510053-002 1510053-003 1510053-004 1510053-005 1510053-006 1510053-007 1510053-008 1510053-009 Insertion Loss in dB at Frequency (MHz) 45 1100 1.6 0.6 2.6 0.6 3.6 0.6 4.6 0.6 5.6 0.6 6.6 0.6 7.6 0.6 8.6 0.6 9.6 0.6 1513173 Rev C HFC Product Accessories Reference Guide 37 Model Table 45 EQL-1220MHz-xx Series Linear Equalizers Specifications P/N EQL-1220MHz-10 EQL-1220MHz-11 EQL-1220MHz-12 Passband Flatness: ±0.3dB Flatness measured with respect to slope. Return Loss: 20 dB min., 22 dB max. All in gray plastic. 1510053-010 1510053-011 1510053-012 (cont'd) Insertion Loss in dB at Frequency (MHz) 45 10.6 11.6 12.6 1100 0.6 0.6 0.6 Table 46 FEQC-1GHz Series Cable Equalizers Specifications Model P/N 47 100 FEQC-1G-02 727900 FEQC-1G-03 727901 1.8 1.7 2.8 2.6 FEQC-1G-04 FEQC-1G-05 FEQC-1G-06 727902 727903 727904 3.8 3.4 4.8 4.3 5.8 5.2 FEQC-1G-07 FEQC-1G-08 FEQC-1G-09 727905 727906 727907 6.8 6.1 7.8 7.0 8.8 7.8 FEQC-1G-10 FEQC-1G-11 FEQC-1G-12 727908 727909 727910 9.8 8.7 11.0 9.8 12.0 10.7 FEQC-1G-13 FEQC-1G-14 FEQC-1G-15 727911 727912 727913 13.0 11.6 14.0 12.5 15.0 13.3 FEQC-1G-16 FEQC-1G-17 FEQC-1G-18 727914 727915 728060 16.0 17.0 18.0 14.2 15.1 16.0 FEQC-1G-19 727917 19.0 16.9 FEQC-1G-20 727918 FEQC-1G-21 727919 20.0 17.7 21.0 18.6 FEQC-1G-22 FEQC-1G-23 FEQC-1G-24 727920 727921 728061 22.0 19.5 23.0 20.4 24.0 21.3 Return Loss I/O: 22/22 dB min. (FEQC-1G-02 to 20) 20/20 dB min. (FEQC-1G-21 to 24) Tolerance: ±0.3dB (FEQC-1G-02 to 20) ±0.5dB (FEQC-1G-21 to 24) 200 1.5 2.2 3.0 3.7 4.4 5.1 5.8 6.6 7.3 8.2 8.9 9.6 10.4 11.1 11.8 12.5 13.3 14.0 14.7 15.4 16.1 16.9 17.6 Insertion Loss in dB at Frequency (MHz) 300 1.4 2.0 2.6 3.2 3.8 4.4 5.0 5.6 6.2 7.0 7.5 8.1 8.7 9.3 9.9 10.5 11.1 11.7 12.3 12.9 13.5 14.1 14.7 400 1.3 1.8 2.3 2.8 3.2 3.7 4.2 4.7 5.2 5.9 6.4 6.8 7.3 7.8 8.3 8.8 9.3 9.8 10.3 10.7 11.2 11.7 12.2 500 1.2 1.6 2.0 2.4 2.8 3.1 3.5 3.9 4.3 4.9 5.3 5.7 6.1 6.5 6.9 7.3 7.7 8.0 8.4 8.8 9.2 9.6 10.0 600 700 800 900 1000 1.1 1.0 0.9 0.9 0.8 1.4 1.2 1.1 0.9 0.8 1.7 1.5 1.2 1.0 0.8 2.0 1.7 1.4 1.1 0.8 2.3 1.9 1.5 1.2 0.8 2.6 2.1 1.7 1.2 0.8 2.9 2.3 1.8 1.3 0.8 3.2 2.6 2.0 1.4 0.8 3.5 2.8 2.1 1.4 0.8 4.0 3.2 2.4 1.7 1.0 4.3 3.4 2.6 1.8 1.0 4.6 3.7 2.7 1.9 1.0 4.9 3.9 2.9 1.9 1.0 5.2 4.1 3.0 2.0 1.0 5.5 4.3 3.2 2.1 1.0 5.9 4.5 3.3 2.1 1.0 6.2 4.8 3.5 2.2 1.0 6.5 5.0 3.6 2.3 1.0 6.8 5.2 3.7 2.4 1.0 7.1 5.4 3.9 2.4 1.0 7.4 5.6 4.0 2.5 1.0 7.7 5.9 4.2. 2.6 1.0 8.0 6.1 4.3 2.6 1.0 Specification Document Number 1504826 38 HFC Product Accessories Reference Guide 1513173 Rev C Table 47 FEQC-750MHz Series Cable Equalizers Specifications Model P/N FEQC-750-02 787652 FEQC-750-04 787654 FEQC-750-06 787656 FEQC-750-08 787658 FEQC-750-10 787660 FEQC-750-12 787662 FEQC-750-14 787665 Return Loss I/O: 22/22dB min. Tolerance: ±0.3dB 47 1.8 3.8 5.8 7.8 9.8 12.0 14.0 100 1.7 3.4 5.1 6.8 8.5 10.4 12.1 Insertion Loss in dB at Frequency (MHz) 200 300 400 500 600 700 750 1.5 1.3 1.2 1.1 0.95 0.85 0.8 2.8 2.3 1.9 1.6 1.25 0.95 0.8 4.1 3.3 2.7 2.1 1.5 1.0 0.8 5.4 4.3 3.4 2.6 1.8 1.1 0.8 6.7 5.3 4.2 3.1 2.1 1.2 0.8 8.2 6.6 5.1 3.8 2.6 1.5 1.0 9.6 7.6 5.9 4.3 2.9 1.6 1.0 Specification Document Number 1505649 Table 48 FEQC-870MHz Series Cable Equalizers Specifications Model P/N 47 100 FEQC-870-02 787638 2.2 2.0 FEQC-870-03 787639 3.0 2.7 FEQC-870-04 787640 3.8 3.4 FEQC-870-05 787641 4.6 4.1 FEQC-870-06 787642 5.4 4.8 FEQC-870-07 787643 7.0 6.2 FEQC-870-08 787644 7.8 6.9 FEQC-870-09 787645 8.7 7.7 FEQC-870-10 787646 10.3 9.1 FEQC-870-11 787647 11.1 9.8 FEQC-870-12 787648 11.9 10.5 FEQC-870-13 787649 12.8 11.2 FEQC-870-14 787650 14.0 12.3 Return Loss I/O: 22/22dB min. (FEQC-870-02 to -08) 20/20dB min. (FEQC-870-09 to 12 and 14) 18/18dB min. (FEQC-870-13) Tolerance: ±0.3dB 200 1.75 2.3 2.85 3.4 4.0 5.1 5.6 6.3 7.4 8.0 8.6 9.1 10.0 Insertion Loss in dB at Frequency (MHz) 300 1.5 2.0 2.4 2.9 3.3 4.2 4.65 5.25 6.1 6.6 7.0 7.5 8.2 400 1.35 1.7 2.0 2.4 2.75 3.45 3.8 4.3 5.0 5.35 5.7 6.1 6.7 500 1.2 1.45 1.7 2.0 2.25 2.8 3.0 3.5 4.0 4.25 4.6 4.8 5.3 600 700 800 870 1.0 0.9 0.75 0.65 1.2 1.0 0.8 0.65 1.4 1.1 0.8 0.65 1.6 1.2 0.9 0.65 1.8 1.3 0.9 0.65 2.15 1.6 1.0 0.65 2.3 1.7 1.1 0.65 2.7 1.95 1.3 0.80 3.05 2.2 1.35 0.80 3.25 2.3 1.4 0.80 3.5 2.5 1.6 1.00 3.7 2.6 1.6 0.90 4.0 2.8 1.7 1.0 Specification Document Number 1505648 1513173 Rev C HFC Product Accessories Reference Guide 39 Table 49 GEQC-1GHz Cable Equalizers Specifications Model P/N Insertion Loss in dB at Frequency (MHz) 45 54 70 80 222 400 500 600 700 800 870 1000 GEQC-1GHz-050 771000 4.7 4.6 4.5 4.4 3.5 2.7 2.3 2.0 1.7 1.4 1.2 0.7 GEQC-1GHz-070 771001 6.4 6.2 6.0 5.9 4.6 3.5 3.0 2.5 2.0 1.6 1.4 0.7 GEQC-1GHz-090 725168 7.8 7.6 7.5 7.3 5.7 4.2 3.5 2.8 2.1 1.6 1.3 0.8 Passband Flatness: ± 0.3 dB Return Loss I/O: 22/22 dB min. Specification Document Number 1502429 Table 50 GEQC-870 Cable Equalizers Specifications Model P/N Insertion Loss in dB at Frequency (MHz) 45 54 70 80 222 400 500 600 700 800 870 GEQC-870-080 725512 6.9 6.8 6.6 6.5 4.9 3.5 2.9 2.2 1.5 1.0 0.7 Passband Flatness: ± 0.3 dB Return Loss I/O: 22/22 dB min. Specification Document Number 1501842 Table 51 GEQL-1GHZ-xxx and GEQL-1GHZ-xxx-1 Series Linear Equalizers Specifications Model P/N Model P/N Insertion Loss in dB at Frequency (MHz) 45 70 100 300 400 500 600 700 800 900 1002 GEQL-1GHZ-000 724574 -- -- 0.0 0.0 0.0 0.0 GEQL-1GHZ-020 724481 GEQL-1GHZ-020-1 725261 2.0 2.0 1.9 1.7 GEQL-1GHZ-030 724496 GEQL-1GHZ-030-1 725271 3.0 2.9 2.9 2.5 GEQL-1GHZ-040 724495 GEQL-1GHZ-040-1 725260 4.0 3.9 3.8 3.2 GEQL-1GHZ-050 724404 GEQL-1GHZ-050-1 725272 5.0 4.9 4.8 3.9 GEQL-1GHZ-060 724355 GEQL-1GHZ-060-1 725243 6.0 5.9 5.7 4.7 GEQL-1GHZ-070 724320 GEQL-1GHZ-070-1 725247 7.0 6.8 6.7 5.4 GEQL-1GHZ-080 724272 GEQL-1GHZ-080-1 725199 8.0 7.8 7.6 6.1 GEQL-1GHZ-090 724279 GEQL-1GHZ-090-1 725064 9.0 8.8 8.5 6.9 GEQL-1GHZ-100 724294 GEQL-1GHZ-100-1 725080 10.0 9.8 9.5 7.6 GEQL-1GHZ-110 724275 GEQL-1GHZ-110-1 725180 11.0 10.7 10.4 8.3 GEQL-1GHZ-120 724255 GEQL-1GHZ-120-1 725076 12.0 11.7 11.4 9.1 GEQL-1GHZ-130 724475 GEQL-1GHZ-130-1 725209 13.0 12.8 12.4 9.9 Passband Flatness: ±0.15dB (GEQL-1GHZ-000) ±0.3dB (GEQL-1GHZ-020 to 130) Flatness measured with respect to slope. Return Loss I/O: 18/18 dB min. All in red plastic. 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1.6 1.5 1.4 1.3 1.2 1.1 1.0 2.3 2.0 1.8 1.6 1.4 1.2 1.0 2.9 2.6 2.3 2.0 1.6 1.3 1.0 3.5 3.1 2.7 2.3 1.8 1.4 1.0 4.1 3.6 3.1 2.6 2.0 1.5 1.0 4.8 4.1 3.5 2.9 2.3 1.6 1.0 5.4 4.7 3.9 3.2 2.5 1.7 1.0 6.0 5.2 4.4 3.5 2.7 1.8 1.0 6.7 5.7 4.8 3.8 2.9 1.9 1.0 7.3 6.2 5.2 4.1 3.1 2.0 1.0 7.9 6.8 5.6 4.5 3.3 2.2 1.0 8.6 7.3 6.1 4.8 3.5 2.3 1.0 Specification Document Number 1500202 Specification Document Number 1502283 40 HFC Product Accessories Reference Guide 1513173 Rev C Table 52 GEQL-87-xxx and GEQL-870-xxx-1 Series Linear Equalizers Specifications Model P/N Model P/N GEQL-870-020 725405 GEQL-870-020-1 GEQL-870-030 725406 GEQL-870-030-1 GEQL-870-040 725400 GEQL-870-040-1 GEQL-870-050 725386 GEQL-870-050-1 GEQL-870-060 725114 GEQL-870-060-1 GEQL-870-070 725401 GEQL-870-070-1 GEQL-870-080 725402 GEQL-870-080-1 GEQL-870-090 725403 GEQL-870-090-1 GEQL-870-100 725407 GEQL-870-100-1 GEQL-870-110 725358 GEQL-870-110-1 GEQL-870-120 725408 GEQL-870-120-1 GEQL-870-130 725404 GEQL-870-130-1 Passband Flatness: ±0.3dB Return Loss I/O: 18/18dB min. Flatness measured with respect to slope. All in purple plastic. 725729 725711 725745 725730 725582 725708 725573 725651 725701 725766 725577 725618 54 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 70 2.0 3.0 3.9 4.9 5.8 6.8 7.8 8.8 9.7 10.7 11.7 12.6 Insertion Loss in dB at Frequency (MHz) 80 100 300 400 500 600 700 800 870 2.0 1.9 1.7 1.6 1.5 1.3 1.2 1.1 1.0 2.9 2.9 2.4 2.2 1.9 1.7 1.4 1.2 1.0 3.9 3.8 3.1 2.7 2.4 2.0 1.6 1.3 1.0 4.8 4.7 3.8 3.3 2.8 2.3 1.8 1.3 1.0 5.8 5.7 4.5 3.8 3.2 2.6 2.0 1.4 1.0 6.7 6.6 5.1 4.4 3.7 3.0 2.2 1.5 1.0 7.7 7.5 5.8 5 4.1 3.3 2.4 1.6 1.0 8.7 8.5 6.5 5.6 4.6 3.6 2.6 1.7 1.0 9.6 9.4 7.2 6.1 5.0 3.9 2.9 1.8 1.0 10.6 10.3 7.9 6.7 5.5 4.3 3.1 1.8 1.0 11.5 11.3 8.6 7.3 5.9 4.6 3.3 1.9 1.0 12.5 12.2 9.3 7.8 6.4 4.9 3.5 2.0 1.0 Specification Document Number 1500774 Specification Document Number 1502284 Table 53 MEQ-42 and MEQT-42 Series Return Cable Equalizers Specifications Model P/N MEQ-42-2 724154 MEQ-42-3 724230 MEQ-42-4 724435 MEQ-42-5 724557 MEQ-42-6 724614 MEQ-42-7 724518 MEQT-42-2 724351 MEQT-42-3 724542 MEQT-42-4 724669 MEQT-42-5 724742 MEQT-42-6 724778 MEQT-42-7 724644 Passband Flatness: ±0.2dB (MEQ-42-x) ±0.3dB (MEQT-42-x) Return Loss I/O: 18/16dB min. Insertion Loss in dB at Frequency (MHz) 5 42 3.0 1.0 4.0 1.0 5.0 1.0 6.0 1.0 7.0 1.0 8.0 1.0 3.6 2.5 5.6 2.5 6.8 2.5 8.4 2.5 8.7 2.5 10.1 2.5 42 3.0 4.6 6.1 7.6 9.1 10.6 3.2 4.7 6.5 9.0 9.4 11.5 dB of Cable Equalized at Frequency (MHz) 300 400 450 550 750 8.0 9.4 10.2 11.3 13.4 12.6 15.0 15.8 17.7 21.0 16.7 19.4 20.7 23.0 27.0 20.4 23.8 25.4 28.3 33.0 24.6 29.0 30.4 34.0 39.6 27.0 31.5 33.0 36.4 45.5 9.0 10.5 11.2 12.5 14.9 13.0 15.2 16.2 18.1 21.5 18.0 21.0 22.4 25.0 29.8 25.0 29.2 31.1 34.7 41.4 26.0 30.4 32.4 36.1 43.1 32.0 37.4 39.8 44.5 53.0 MEQ-42 Specification Document Number 600540 MEQT-42 Specification Document Number 600595 1513173 Rev C HFC Product Accessories Reference Guide 41 Table 54 MEQ-55 Series Return Cable Equalizers Specifications Model P/N MEQ-55-2 726090 MEQ-55-3 726091 MEQ-55-4 762225 MEQ-55-5 762227 MEQ-55-6 726299 MEQ-55-7 762230 Passband Flatness: ±0.2dB Return Loss I/O: 18/16dB min. Insertion Loss in dB at Frequency (MHz) 5 55 1.9 1.0 2.7 1.0 3.6 1.0 4.5 1.0 5.6 1.0 6.8 1.0 dB of cable equalized at Frequency (MHz) 55 300 400 450 550 750 1.2 3.0 3.5 3.7 4.2 5.0 2.5 6.0 7.0 7.5 8.3 9.9 3.7 9.0 10.5 11.2 12.5 14.9 4.9 12.0 14.0 14.9 16.7 19.9 6.6 16.0 18.7 19.9 22.2 26.5 8.2 20.0 23.4 24.9 27.8 33.1 Specification Document Number 600695 Table 55 MEQ-65 Series Return Cable Equalizers Specifications Model P/N MEQ-65-02 724846 MEQ-65-03 724852 MEQ-65-04 724696 MEQ-65-05 724818 MEQ-65-06 724910 MEQ-65-07 724973 Passband Flatness: ±0.1dB Return Loss I/O: 18/16dB min. Insertion Loss in dB at Frequency (MHz) 5 65 2.0 1.0 2.9 1.0 3.9 1.0 5.2 1.0 6.2 1.0 7.1 1.0 dB of Cable Equalized at Frequency (MHz) 65 300 400 450 550 750 1.3 3.0 3.5 3.7 4.2 5.0 2.7 6.0 7.0 7.5 8.3 9.9 4.0 9.0 10.5 11.2 12.5 14.9 5.8 13.0 15.2 16.2 18.1 21.5 7.1 16.0 18.7 19.9 22.2 26.5 8.5 19.0 22.2 23.6 26.4 31.5 Specification Document Number 600615 1513173 Rev C HFC Product Accessories Reference Guide 42 Table 56 MEQ-85 and MEQT-85 Series Return Cable Equalizers Specifications Model P/N Insertion Loss @ 23C in dB at Frequency (MHz) 5 85 MEQ-85-2 775422 1.98 1.00 MEQ-85-3 775423 2.97 1.00 MEQ-85-4 775424 4.03 1.00 MEQ-85-5 775425 5.01 1.00 MEQ-85-6 775426 6.00 1.00 MEQ-85-7 775427 7.06 1.00 MEQT-85-2 775428 3.48 2.50 MEQT-85-3 775429 4.47 2.50 MEQT-85-4 775430 5.43 2.50 MEQT-85-5 775431 6.51 2.50 MEQT-85-6 775432 7.50 2.50 MEQT-85-7 775433 8.56 2.50 Passband Flatness: ±0.2dB (MEQ-85, MEQT-85-2 to 4) ±0.3dB (MEQT-85-5 to 7) Return Loss I/O: 18/16dB min. Cable Loss @ 23C 85 1.30 2.60 4.00 5.30 6.60 8.00 1.30 2.60 4.00 5.30 6.60 8.00 Insertion Loss @ -20C in dB at Frequency (MHz) Insertion Loss @ 80C in dB at Frequency (MHz) 5 85 550 750 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 4.01 3.14 2.96 1.91 5.04 3.28 3.92 1.81 6.13 3.43 4.96 1.71 7.15 3.57 6.02 1.72 8.17 3.71 7.08 1.72 9.27 3.86 8.02 1.62 MEQ-85 Specification Document Number 1504358 MEQT-85 Specification Document Number 1504359 Table 57 NEQL-870 Series Linear Equalizers Specifications Model P/N 54 70 NEQL-870-050 725236 5.0 4.9 NEQL-870-060 725220 6.0 5.8 NEQL-870-050 725236 5.0 4.9 NEQL-870-060 725220 6.0 5.8 NEQL-870-070 725388 7.0 6.8 NEQL-870-080 725170 8.0 7.8 NEQL-870-090 725102 9.0 8.8 NEQL-870-100 725135 10.0 9.7 NEQL-870-110 725217 11.0 10.7 NEQL-870-120 725229 12.0 11.7 NEQL-870-130 726401 13.0 12.6 NEQL-870-140 726402 14.1 13.8 NEQL-870-150 776407 15.0 14.8 Passband Flatness: ±0.3dB Return Loss I/O: 18/18dB min. Flatness measured with respect to slope. All in yellow plastic. 80 4.8 5.8 4.8 5.8 6.7 7.7 8.7 9.6 10.6 11.5 12.5 13.6 14.6 Insertion Loss in dB at Frequency (MHz) 100 300 400 500 600 700 800 870 4.7 3.8 3.3 2.8 2.3 1.8 1.3 1.0 5.7 4.5 3.8 3.2 2.6 2.0 1.4 1.0 4.7 3.8 3.3 2.8 2.3 1.8 1.3 1.0 5.7 4.5 3.8 3.2 2.6 2.0 1.4 1.0 6.6 5.1 4.4 3.7 3.0 2.2 1.5 1.0 7.5 5.8 5.0 4.1 3.3 2.4 1.6 1.0 8.5 6.5 5.6 4.6 3.6 2.6 1.7 1.0 9.4 7.2 6.1 5.0 3.9 2.9 1.8 1.0 10.3 7.9 6.7 5.5 4.3 3.1 1.8 1.0 11.3 8.6 7.3 5.9 4.6 3.3 1.9 1.0 12.2 9.3 7.8 6.4 4.9 3.5 2.0 1.0 13.3 10.2 8.6 7.0 5.5 3.9 2.3 1.2 14.3 10.9 9.2 7.5 5.8 4.1 2.4 1.2 Specification Document Number 601264 1513173 Rev C HFC Product Accessories Reference Guide 43 Table 58 PEQ-1G Cable Equalizers Specifications Model P/N 54 85 PEQ-1G-02 PEQ-1G-03 PEQ-1G-04 725369 725370 725371 2.0 1.9 2.9 2.8 4.0 3.8 PEQ-1G-05 PEQ-1G-06 PEQ-1G-07 725372 725373 725374 5.0 4.7 6.0 5.7 7.0 6.6 PEQ-1G-08 PEQ-1G-09 PEQ-1G-10 725375 725376 725376 8.0 7.4 9.0 8.5 10.0 9.3 PEQ-1G-11 PEQ-1G-12 PEQ-1G-13 725378 725379 725380 11.0 12.0 13.0 10.4 11.1 12.2 PEQ-1G-14 778087 PEQ-1G-15 725381 14.0 14.9 13.0 13.9 PEQ-1G-16 725382 16.0 14.9 PEQ-1G-17 725383 PEQ-1G-18 725384 17.0 18.0 15.6 16.9 PEQ-1G-19 725385 19.0 17.7 PEQ-1G-20 778088 20.0 18.5 Passband Flatness: ±0.3dB (PEQ-1G-02 to 18) ±0.4dB (PEQ-1G-19 and 20) Return Loss I/O: 18/18dB min. (PEQ-1G-02 to 18) 16/16dB min. (PEQ-1G-19 and 20) 105 1.8 2.6 3.6 4.6 5.5 6.4 7.1 8.2 9.0 10.0 10.8 11.8 12.4 13.3 14.3 15.0 16.2 16.9 17.7 Insertion Loss (dB) @ Frequency (MHz) 222 350 450 550 650 1.5 1.4 1.3 1.2 1.0 2.3 2.1 1.9 1.7 1.4 3.1 2.6 2.3 2.1 1.9 3.8 3.1 2.7 2.4 2.0 4.6 3.8 3.3 2.8 2.4 5.4 4.4 3.8 3.1 2.6 5.8 4.7 4.0 3.4 2.8 6.8 5.4 4.5 3.8 3.1 7.3 5.7 4.8 4.0 3.2 8.1 6.4 5.4 4.5 3.7 8.8 7.0 5.9 4.9 3.9 9.5 7.6 6.3 5.1 4.1 10.2 8.2 6.9 5.7 4.6 10.8 8.6 7.1 5.8 4.6 11.5 9.2 7.6 6.3 5.0 12.2 9.7 8.0 6.5 5.2 13.2 10.5 8.7 7.0 5.6 13.7 10.8 9.0 7.3 5.7 14.2 11.2 9.3 7.6 6.0 Cable Loss 750 870 1002 @ 1002 MHz 0.8 0.7 0.7 1.55 1.1 0.9 0.8 2.80 1.6 1.4 1.0 3.70 1.7 1.4 1.0 5.10 2.0 1.6 1.0 6.35 2.0 1.6 1.0 7.75 2.2 1.6 1.0 8.90 2.5 1.9 1.0 10.20 2.5 1.9 1.0 11.45 2.9 2.1 1.0 12.70 3.0 2.1 1.0 14.00 3.2 2.2 1.0 15.25 3.5 2.3 1.0 16.50 3.5 2.3 1.0 17.80 3.7 2.4 1.0 19.05 3.9 2.4 1.0 20.30 4.0 2.4 0.8 21.80 4.1 2.4 0.8 23.05 4.4 2.6 0.8 24.05 Specification Document Number 1503587 Table 59 REQC-42MHz Series Cable Equalizers Specifications Model P/N REQC-42-2 788504 REQC-42-3 788505 REQC-42-4 788506 REQC-42-5 788507 REQC-42-6 788508 REQC-42-7 788509 REQC-42-8 788510 REQC-42-9 788511 Return Loss I/O: 22/22dB min. Tolerance: ±0.3dB 5 2.0 2.8 3.3 4.6 5.95 7.40 7.80 8.75 Insertion Loss in dB at Frequency (MHz) 10 20 30 40 42 1.7 1.3 1.0 0.70 0.65 2.4 1.75 1.3 0.90 0.8 2.7 1.9 1.3 075 0.65 3.8 2.55 1.6 0.8 0.65 4.8 3.2 1.9 0.85 0.65 6.0 4.0 2.4 1.05 0.80 6.3 4.1 2.5 1.1 0.80 7.0 4.60 2.7 1.1 0.8 Specification Document Number 1505737 1513173 Rev C HFC Product Accessories Reference Guide 44 Table 59 REQC-42MHz Series Cable Equalizers Specifications (cont'd) Model P/N REQC-42-10 788512 REQC-42-11 788513 Return Loss I/O: 22/22dB min. Tolerance: ±0.3dB Insertion Loss in dB at Frequency (MHz) 5 10 20 30 40 42 10 8.1 5.3 3.2 1.3 1.0 11 8.8 5.8 3.4 1.4 1.0 Specification Document Number 1505737 Table 60 REQC-65MHz Series Cable Equalizers Specifications Model P/N 5 10 REQC-65-2 727923 1.8 1.7 REQC-65-3 REQC-65-4 727924 727925 2.8 2.6 3.8 3.4 REQC-65-5 727926 4.8 4.3 REQC-65-6 REQC-65-7 727927 727928 5.8 5.3 6.8 6.1 REQC-65-8 727929 7.8 7.0 REQC-65-9 REQC-65-10 727930 727931 8.8 7.9 10.0 8.9 REQC-65-11 727932 11.0 9.7 Return Loss I/O: 22/22dB min. Tolerance: ±0.3dB Insertion Loss in dB at Frequency (MHz) 20 30 40 50 60 65 1.5 1.3 1.1 1.0 0.9 0.8 2.1 1.7 1.4 1.2 0.9 0.8 2.7 2.2 1.7 1.3 0.9 0.8 3.4 2.7 2.0 1.5 1.0 0.8 4.1 3.2 2.4 1.7 1.1 0.8 4.7 3.6 2.7 1.9 1.1 0.8 5.4 4.1 3.0 2.1 1.2 0.8 6.1 4.6 3.4 2.3 1.3 0.8 6.8 5.2 3.8 2.6 1.5 1.0 7.4 5.6 4.1 2.8 1.6 1.0 Specification Document Number 1504827 Table 61 REQC-85MHz Series Cable Equalizers Specifications Model P/N REQC-85-2 791130 REQC-85-3 791131 REQC-85-4 791132 REQC-85-5 791133 REQC-85-6 791134 REQC-85-7 791135 REQC-85-8 791136 REQC-85-9 791137 REQC-85-10 791138 REQC-85-11 791139 Return Loss I/O: 22/22dB min. Tolerance: ±0.3dB 5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 10 1.9 2.7 3.6 4.5 5.35 6.2 7.1 7.95 8.8 9.7 20 1.7 2.4 3.05 3.7 4.4 5.1 5.8 6.5 7.2 7.8 Insertion Loss in dB at Frequency (MHz) 30 40 50 60 70 80 85 1.5 1.4 1.3 1.2 1.1 1.05 1.0 2.1 1.8 1.6 1.4 1.2 1.1 1.0 2.6 2.2 1.9 1.65 1.4 1.1 1.0 3.2 2.7 2.2 1.85 1.5 1.15 1.0 3.7 3.1 2.6 2.1 1.6 1.2 1.0 4.2 3.5 2.9 2.3 1.75 1.25 1.0 4.8 3.9 3.2 2.5 1.9 1.3 1.0 5.3 4.35 3.5 2.7 2.0 1.3 1.0 5.9 4.8 3.8 2.9 2.1 1.35 1.0 6.4 5.2 4.1 3.15 2.25 1.4 1.0 Specification Document Number 1506125 1513173 Rev C HFC Product Accessories Reference Guide 45 Table 62 SEQ-1G Series Cable Equalizers Specifications Model P/N 54 85 SEQ-1G-0 724297 0.0 0.0 SEQ-1G-02 724252 2.0 1.9 SEQ-1G-03 724323 2.9 2.8 SEQ-1G-04 724313 4.0 3.8 SEQ-1G-05 724319 5.0 4.7 SEQ-1G-06 724248 6.0 5.7 SEQ-1G-07 724253 7.0 6.6 SEQ-1G-08 724261 8.0 7.4 SEQ-1G-09 724274 9.0 8.5 SEQ-1G-10 724280 10.0 9.3 SEQ-1G-11 724317 11.0 10.4 SEQ-1G-12 724300 12.0 11.1 SEQ-1G-13 724330 13.0 12.2 SEQ-1G-14 724345 14.0 13.0 SEQ-1G-15 724359 14.9 13.9 SEQ-1G-16 724368 16.0 14.9 SEQ-1G-17 724427 17.0 15.6 SEQ-1G-18 724425 18.0 16.9 SEQ-1G-19 724519 19.0 17.7 SEQ-1G-20 724502 20.0 18.2 Passband Flatness: ±0.3 dB (SEQ-1G-02 to 18) ±0.4 dB (SEQ-1G-19 and 20) Return Loss I/O: 18/18dB min. (SEQ-1G-02 to 18) 16/16dB min. (SEQ-1G-19 and 20) 105 0.0 1.8 2.6 3.6 4.6 5.5 6.4 7.1 8.2 9.0 10.0 10.8 11.8 12.4 13.3 14.3 15.0 16.2 16.9 17.7 Insertion Loss in dB at Frequency (MHz) 222 350 450 550 650 750 870 1002 * 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1.5 1.4 1.3 1.2 1.0 0.8 0.7 0.7 1.55 2.3 2.1 1.9 1.7 1.4 1.1 0.9 0.8 2.80 3.1 2.6 2.3 2.1 1.9 1.6 1.4 1.0 3.70 3.8 3.1 2.7 2.4 2.0 1.7 1.4 1.0 5.10 4.6 3.8 3.3 2.8 2.4 2.0 1.6 1.0 6.35 5.4 4.4 3.8 3.1 2.6 2.0 1.6 1.0 7.75 5.8 4.7 4.0 3.4 2.8 2.2 1.6 1.0 8.90 6.8 5.4 4.5 3.8 3.1 2.5 1.9 1.0 10.20 7.3 5.7 4.8 4.0 3.2 2.5 1.9 1.0 11.45 8.1 6.4 5.4 4.5 3.7 2.9 2.1 1.0 12.70 8.8 7.0 5.9 4.9 3.9 3.0 2.1 1.0 14.0 9.5 7.6 6.3 5.1 4.1 3.2 2.2 1.0 15.25 10.2 8.2 6.9 5.7 4.6 3.5 2.3 1.0 16.5 10.8 8.6 7.1 5.8 4.6 3.5 2.3 1.0 17.8 11.5 9.2 7.6 6.3 5.0 3.7 2.4 1.0 19.05 12.2 9.7 8.0 6.5 5.2 3.9 2.4 1.0 20.3 13.2 10.5 8.7 7.0 5.6 4.0 2.4 0.8 21.8 13.7 10/8 9.0 7.3 5.7 4.1 2.4 0.8 23.05 14.2 11.2 9.3 7.6 6.0 4.4 2.6 0.8 24.05 *dB of cable equalized at 1002MHz Specification Document Number 1500769 46 HFC Product Accessories Reference Guide 1513173 Rev C Table 63 SEQ-750 Series Cable Equalizers Specifications Model P/N 54 SEQ-0 724376 0.0 SEQ-750-02 724907 2.0 SEQ-750-03 724920 3.0 SEQ-750-04 724955 3.9 SEQ-750-05 724911 4.9 SEQ-750-06 724861 5.9 SEQ-750-07 724885 7.0 SEQ-750-08 725006 8.0 SEQ-750-09 725070 9.0 SEQ-750-10 725025 9.8 SEQ-750-11 725004 11.0 SEQ-750-12 725208 11.8 SEQ-750-13 725257 12.9 SEQ-750-14 725205 14.0 SEQ-750-15 725139 14.9 SEQ-750-16 724859 15.8 SEQ-750-17 725058 16.8 SEQ-750-18 725120 17.9 SEQ-750-19 725119 18.8 SEQ-750-20 725160 19.8 SEQ-750-21 725273 20.8 SEQ-750-2-2 762194 2.8 SEQ-750-4-2 762239 4.5 SEQ-750-4-3 762241 5.5 SEQ-750-5-5 725184 8.9 Passband Flatness: ±0.3dB Return Loss I/O: 18/16dB min. 70 0.0 2.0 2.8 3.9 4.6 5.7 6.8 7.9 8.8 9.4 10.5 11.3 12.4 13.5 14.3 14.9 16.0 17.1 17.8 19.0 19.8 2.8 4.4 5.4 8.6 Insertion Loss in dB at Frequency (MHz) 80 222 350 450 550 0.0 0.0 0.0 0.0 0.0 2.0 1.8 1.4 1.3 1.3 2.7 2.4 1.9 1.7 1.5 3.8 3.1 2.4 2.0 1.7 4.5 3.5 2.9 2.3 1.8 5.6 4.2 3.3 2.7 2.0 6.6 5.0 3.6 2.8 2.0 7.6 5.5 4.2 3.3 2.5 8.6 6.3 4.8 3.8 2.7 9.2 6.7 5.0 3.8 2.8 10.2 7.5 5.5 4.2 3.0 11.0 8.1 6.0 4.6 3.3 12.2 8.9 6.6 5.1 3.7 13.2 9.7 6.9 5.3 3.8 13.9 10.1 7.5 5.8 4.3 14.5 10.5 8.0 6.1 4.4 15.6 11.3 8.2 6.2 4.4 16.6 11.9 8.6 6.6 4.6 17.4 12.3 9.1 6.9 4.8 18.5 13.2 9.5 7.2 5.0 19.3 13.4 10.0 7.5 5.2 2.8 2.5 2.3 2.2 2.1 4.3 3.6 3.1 2.8 2.5 5.3 4.7 4.1 3.8 3.5 8.6 7.6 6.9 6.3 5.8 dB of cable 650 750 equalized at highest frequency 0.0 0.0 0.0 1.2 1.0 1.5 1.3 1.0 2.5 1.4 1.0 4.0 1.4 1.0 5.0 1.5 1.0 6.5 1.6 1.0 8.0 1.8 1.0 9.0 2.0 1.0 10.5 2.0 1.0 12.0 2.0 1.0 13.5 2.2 1.0 14.5 2.5 1.0 16.0 2.5 1.0 17.0 2.6 1.0 18.5 2.7 1.0 20.0 2.6 1.0 21.0 2.6 1.0 22.4 2.7 1.0 23.7 2.8 1.0 25.0 2.9 1.0 26.3 2.1 2.0 1.1 2.2 2.0 3.3 3.2 3.0 3.3 5.4 5.0 5.0 Specification Document Number 600563 1513173 Rev C HFC Product Accessories Reference Guide 47 Table 64 SEQ-862 Series Cable Equalizers Specifications Model P/N 54 SEQ-0 724376 0.0 SEQ-862-02 724596 1.9 SEQ-862-03 724531 2.9 SEQ-862-04 724535 4.0 SEQ-862-05 724464 4.8 SEQ-862-06 724473 5.9 SEQ-862-07 724521 6.9 SEQ-862-08 724515 7.8 SEQ-862-09 724568 8.8 SEQ-862-10 724616 9.6 SEQ-862-11 724583 10.8 SEQ-862-12 724545 11.6 SEQ-862-13 724620 12.8 SEQ-862-14 724646 13.6 SEQ-862-15 724658 14.5 SEQ-862-16 724609 15.3 SEQ-862-17 724674 17.5 SEQ-862-18 724679 18.4 SEQ-862-19 724795 19.5 SEQ-862-20 724790 20.3 Passband Flatness: ±0.3dB Return Loss I/O: 20/18dB min. 70 0.0 1.9 2.8 4.0 4.6 5.6 6.6 7.5 8.4 9.1 10.3 11.1 12.4 12.9 13.9 14.7 16.8 17.5 18.6 19.4 Insertion Loss in dB at Frequency (MHz) 80 222 500 600 700 0.0 0.0 0.0 0.0 0.0 1.9 1.8 1.4 1.3 1.2 2.8 2.4 1.6 1.5 1.4 4.0 3.2 1.9 1.6 1.4 4.5 3.4 2.1 1.7 1.4 5.6 4.2 2.6 2.1 1.6 6.6 5.4 3.1 2.5 1.9 7.4 5.6 3.4 2.7 2.1 8.3 6.3 3.6 2.8 2.0 8.9 6.9 3.8 2.9 2.1 10.2 7.6 4.4 3.5 2.5 10.8 8.2 4.7 3.7 2.7 12.0 8.8 5.0 3.9 2.8 12.7 9.6 5.2 4.0 2.9 13.5 10.4 5.6 4.2 3.0 14.3 10.8 6.1 4.7 3.3 16.4 12.2 6.5 5.1 3.5 17.2 12.7 6.8 5.2 3.6 18.2 13.6 7.2 5.7 3.8 19.0 14.2 7.6 5.8 3.9 dB of cable 800 862 equalized at highest frequency 0.0 0.0 0.0 1.1 1.0 1.0 1.2 1.0 2.0 1.2 1.0 4.0 1.2 1.0 5.0 1.2 1.0 6.5 1.4 1.0 7.8 1.4 1.0 8.7 1.4 1.0 10.5 1.4 1.0 11.0 1.6 1.0 13.0 1.7 1.0 14.5 1.7 1.0 15.5 1.8 1.0 16.5 1.8 1.0 17.5 2.0 1.0 19.0 2.0 1.0 21.3 2.0 1.0 22.4 2.0 1.0 23.9 2.0 1.0 24.9 Specification Document Number 600438 Rev J 1513173 Rev C HFC Product Accessories Reference Guide 48 Model SFE-100-0-R SFE-100-1-R SFE-100-2-R SFE-100-3-R SFE-100-4-R SFE-100-5-R SFE-100-6-R SFE-100-7-R SFE-100-8-R SFE-100-9-R SFE-100-10-R SFE-100-11-R SFE-100-12-R SFE-100-13-R SFE-100-14-R SFE-100-15-R SFE-100-16-R SFE-100-17-R SFE-100-18-R SFE-100-19-R SFE-100-20-R SFE-100-21-R SFE-100-22-R SFE-100-23-R SFE-100-24-R Table 65 SFE Series Forward Cable Equalizers Specifications Part Number 535723-001-00 531124-001-00 531124-002-00 531124-003-00 531124-004-00 531124-005-00 531124-006-00 531124-007-00 531124-008-00 531124-009-00 531124-010-00 531124-011-00 531124-012-00 531124-013-00 531124-014-00 531124-015-00 531124-016-00 531124-017-00 531124-018-00 531124-019-00 531124-020-00 531124-021-00 531124-022-00 531124-023-00 531124-024-00 Insertion Loss in dB at Frequency (MHz) 50 65 85 200 300 450 550 650 750 870 1003 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.8 -1.8 -1.7 -1.6 -1.5 -1.3 -1.3 -1.2 -1.1 -1.1 -1.0 -2.6 -2.5 -2.5 -2.1 -1.9 -1.7 -1.5 -1.4 -1.3 -1.1 -1.0 -3.3 -3.2 -3.1 -2.7 -2.4 -2.0 -1.8 -1.6 -1.4 -1.2 -1.0 -4.1 -4.0 -3.9 -3.2 -2.8 -2.3 -2.0 -1.8 -1.5 -1.3 -1.0 -4.9 -4.7 -4.6 -3.8 -3.3 -2.7 -2.3 -2.0 -1.7 -1.3 -1.0 -5.7 -5.5 -5.3 -4.3 -3.7 -3.0 -2.6 -2.2 -1.8 -1.4 -1.0 -6.4 -6.3 -6.0 -4.9 -4.2 -3.3 -2.8 -2.4 -1.9 -1.5 -1.0 -7.2 -7.0 -6.8 -5.4 -4.6 -3.6 -3.1 -2.6 -2.1 -1.5 -1.0 -8.0 -7.8 -7.5 -6.0 -5.1 -4.0 -3.3 -2.8 -2.2 -1.6 -1.0 -8.8 -8.6 -8.2 -6.5 -5.5 -4.3 -3.6 -2.9 -2.4 -1.7 -1.0 -9.5 -9.2 -8.9 -7.1 -6.0 -4.6 -3.9 -3.1 -2.5 -1.8 -1.0 -10.3 -10.0 -9.6 -7.6 -6.4 -5.0 -4.1 -3.3 -2.6 -1.8 -1.0 -11.1 -10.8 -10.4 -8.2 -6.9 -5.3 -4.4 -3.5 -2.8 -1.9 -1.0 -11.9 -11.6 -11.1 -8.7 -7.3 -5.6 -4.6 -3.7 -2.9 -2.0 -1.0 -12.7 -12.4 -11.9 -9.3 -7.8 -6.0 -4.9 -3.9 -3.0 -2.0 -1.0 -13.4 -13.0 -12.5 -9.9 -8.2 -6.3 -5.2 -4.1 -3.2 -2.1 -1.0 -14.2 -13.8 -13.3 -10.4 -8.7 -6.6 -5.4 -4.3 -3.3 -2.2 -1.0 -15.0 -14.6 -14.0 -11.0 -9.2 -6.9 -5.7 -4.5 -3.4 -2.2 -1.0 -15.8 -15.3 -14.8 -11.5 -9.6 -7.3 -5.9 -4.7 -3.6 -2.3 -1.0 -16.5 -16.0 -15.4 -12.1 -10.1 -7.6 -6.2 -4.9 -3.7 -2.4 -1.0 -17.3 -16.8 -16.2 -12.6 -10.5 -7.9 -6.4 -5.1 -3.8 -2.4 -1.0 -18.1 -17.6 -16.9 -13.2 -11.0 -8.3 -6.7 -5.3 -4.0 -2.5 -1.0 -18.9 -18.3 -17.7 -13.7 -11.8 -8.6 -7.0 -5.5 -4.1 -2.6 -1.0 -19.6 -19.1 -18.3 -14.3 -11.9 -8.9 -7.2 -5.7 -4.2 -2.6 -1.0 1513173 Rev C HFC Product Accessories Reference Guide 49 Table 66 T-EQ-*-Q Series Cable Equalizers Specifications Specification EQ Value (dB nominal) Drop Insertion Loss* (dB max.) Forward Response Flatness (dB max.) Frequency T-EQ-2-Q T-EQ-4-Q T-EQ-6-Q T-EQ-8-Q T-EQ-10-Q T-EQ-12-Q T-EQ-14-Q T-EQ-16-Q T-EQ-18-Q T-EQ-20-Q T-EQ-22-Q (MHz) 1003 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 5 50 85 104 300 450 550 750 870 1000 1218 -- 2.9 2.9 2.9 2.8 2.4 2.1 1.9 1.5 1.2 1.0 1.0 ± 0.5 4.1 4.1 4.1 4.1 3.6 3.0 2.5 1.5 1.2 1.0 1.0 ± 0.5 6.2 6.1 6.0 5.9 4.7 3.7 3.1 2.1 1.5 0.9 0.9 ± 0.5 7.8 7.6 7.6 7.6 5.9 4.6 3.8 2.2 1.5 1.1 1.1 ± 0.7 9.2 9.1 8.9 8.9 7.2 5.6 4.5 2.4 1.6 1.1 1.1 ± 0.7 11.1 11.0 10.8 10.8 8.6 6.6 5.4 3.1 2.1 1.2 1.1 ± 0.7 12.9 12.5 12.5 11.3 9.4 7.0 5.6 3.2 2.2 1.2 1.1 ± 0.8 14.8 14.5 14.0 14.0 10.9 8.3 6.8 4.2 2.9 1.8 1.2 ± 0.9 18.1 18.1 17.6 17.0 12.1 8.9 7.1 4.2 2.9 1.8 1.5 ±1.2 20.0 20.0 18.6 18.0 12.4 8.9 7.1 4.2 2.9 1.8 1.5 ±1.2 22.0 22.0 20.0 19.2 12.4 8.9 7.1 4.2 2.9 1.8 1.5 ±1.2 Cable Simulators and Cable Equivalents Cable simulators provide sloped attenuation of RF signals with the greatest attenuation occurring at the highest frequency. They are plug-in fixed units, which are used in place of equalizers in the forward path in those cases where the cable spacing is less than the amount of equalization built into the amplifier. Table 67 7-2E862Cx-WC Cable Simulators Specifications Model P/N Insertion Loss in dB at Frequency (MHz) 45 54 70 85 450 550 650 750 870 7-2E862C1-WC 725326 0.2 0.2 0.3 0.3 0.7 0.8 0.8 0.9 1.0 7-2E862C2-WC 725318 0.2 0.2 0.3 0.4 1.2 1.3 1.5 1.6 1.8 7-2E862C3-WC 7-2E862C4-WC 725356 725314 0.2 0.3 0.4 0.4 1.7 1.9 2.1 2.4 2.6 0.2 0.3 0.4 0.5 2.2 2.5 2.8 3.1 3.4 7-2E862C5-WC 725280 0.3 0.5 0.6 0.7 2.8 3.2 3.6 3.9 4.3 7-2E862C6-WC 7-2E862C7-WC 725452 725392 0.6 0.8 1.0 1.1 3.6 4.1 4.5 5.0 5.4 0.7 0.9 1.1 1.3 4.2 4.8 5.3 5.8 6.3 7-2E862C8-WC 725499 0.9 1.1 1.3 1.5 4.8 5.5 6.1 6.6 7.3 7-2E862C9-WC 7-2E862C10-WC 725175 725668 1.1 1.3 1.6 1.8 5.5 6.2 6.9 7.6 8.3 1.3 1.5 1.8 2.1 6.2 7.0 7.8 8.5 9.3 7-2E862C11-WC 725754 1.5 1.7 2.1 2.4 6.9 7.8 8.6 9.4 10.3 7-2E862C12-WC 725682 1.7 2.0 2.3 2.7 7.6 8.6 9.5 10.3 11.3 Passband Flatness: ±0.4dB Return Loss I/O: Specification Document Number 871541 16/16dB (7-2E862C1 to C6) 15/15 dB (7-2E862C7 to C12) 1513173 Rev C HFC Product Accessories Reference Guide 50 Table 68 CE862 Cable Equivalent Specifications Model CE862/2 CE862/4 CE862/6 CE862/8 P/N 725713 725182 725177 726308 47 MHz 1 1 1 1 Insertion Loss 862 MHz 2 4 6 8 Table 69 PCS-1G Series Cable Simulators Specifications Model P/N Insertion Loss in dB at Frequency (MHz) 50 70 80 550 750 806 862 1002 PCS-1G-02 725360 1.0 1.0 1.1 1.6 1.8 1.9 1.9 2.0 PCS-1G-03 725361 1.0 1.1 1.1 2.3 2.6 2.7 2.8 3.0 PCS-1G-04 725362 1.0 1.1 1.2 2.9 3.4 3.6 3.7 4.0 PCS-1G-05 725363 1.0 1.2 1.3 3.6 4.3 4.4 4.6 5.0 PCS-1G-06 725364 1.0 1.2 1.3 4.2 5.1 5.3 5.5 6.0 PCS-1G-07 725365 1.0 1.3 1.4 4.9 5.9 6.2 6.4 7.0 PCS-1G-08 725366 1.0 1.3 1.5 5.5 6.7 7.0 7.3 8.0 PCS-1G-09 725367 1.0 1.4 1.5 6.1 7.5 7.9 8.2 9.0 PCS-1G-10 725368 1.0 1.4 1.6 6.8 8.3 8.7 9.1 10.0 PCS-1G-11 778084 1.0 1.5 1.7 7.4 9.2 9.6 10.0 11.0 PCS-1G-12 778085 1.0 1.5 1.7 8.1 10.0 10.5 10.9 12.0 Passband Flatness: ±0.4dB Return Loss I/O: 16/16dB min. dB of cable simulated at Frequency (MHz) 350 450 550 650 750 806 862 1002 0.7 0.8 0.9 1.0 1.1 1.1 1.2 1.3 1.4 1.6 1.8 2.0 2.2 2.2 2.3 2.5 2.1 2.4 2.7 3.0 3.2 3.3 3.5 3.8 2.8 3.2 3.6 3.9 4.3 4.5 4.6 5.0 3.5 4.0 4.5 4.9 5.3 5.6 5.8 6.3 4.2 4.8 5.4 5.9 6.4 6.7 6.9 7.5 4.9 5.6 6.3 6.9 7.5 7.8 8.1 8.8 5.6 6.4 7.2 7.9 8.6 8.9 9.2 10.0 6.3 7.2 8.1 8.9 9.6 10.0 10.4 11.3 7.0 8.0 9.0 9.9 10.7 11.1 11.5 12.5 7.7 8.8 9.9 10.8 11.8 12.2 12.7 13.8 Specification 1503588 1513173 Rev C HFC Product Accessories Reference Guide 51 Table 70 SCS-1G Series Cable Simulators Specifications Model P/N Insertion Loss in dB at Frequency (MHz) dB of Cable Simulated at Frequency (MHz) 50 70 SCS-1G-02 724347 1.0 1.0 SCS-1G-03 724380 1.0 1.1 SCS-1G-04 724391 1.0 1.1 SCS-1G-05 724389 1.0 1.2 SCS-1G-06 724331 1.0 1.2 SCS-1G-07 724361 1.0 1.3 SCS-1G-08 724367 1.0 1.3 SCS-1G-09 724372 1.0 1.4 SCS-1G-10 724369 1.0 1.4 SCS-1G-11 724402 1.0 1.5 SCS-1G-12 724393 1.0 1.5 SCS-1G-13 724453 1.0 1.6 SCS-1G-14 724462 1.0 1.6 SCS-1G-15 724449 1.0 1.7 Passband Flatness: ±0.4dB Return Loss I/O: 18/16dB min. 80 550 750 806 862 1002 350 1.1 1.6 1.8 1.9 1.9 2.0 0.7 1.1 2.3 2.6 2.7 2.8 3.0 1.4 1.2 2.9 3.4 3.6 3.7 4.0 2.1 1.3 3.6 4.3 4.4 4.6 5.0 2.8 1.3 4.2 5.1 5.3 5.5 6.0 3.5 1.4 4.9 5.9 6.2 6.4 7.0 4.2 1.5 5.5 6.7 7.0 7.3 8.0 4.9 1.5 6.1 7.5 7.9 8.2 9.0 5.6 1.6 6.8 8.3 8.7 9.1 10.0 6.3 1.7 7.4 9.2 9.6 10.0 11.0 7.0 1.7 8.1 10.0 10.5 10.9 12.0 7.7 1.8 8.7 10.8 11.3 11.8 13.0 8.4 1.9 9.4 11.6 12.2 12.7 14.0 9.1 2.0 10.0 12.4 13.0 13.6 15.0 9.8 450 550 650 0.8 0.9 1.0 1.6 1.8 2.0 2.4 2.7 3.0 3.2 3.6 3.9 4.0 4.5 4.9 4.8 5.4 5.9 5.6 6.3 6.9 6.4 7.2 7.9 7.2 8.1 8.9 8.0 9.0 9.9 8.8 9.9 10.8 9.6 10.8 11.8 10.4 11.6 12.8 11.2 12.5 13.8 750 806 862 1002 1.1 1.1 1.2 1.3 2.2 2.2 2.3 2.5 3.2 3.3 3.5 3.8 4.3 4.5 4.6 5.0 5.3 5.6 5.8 6.3 6.4 6.7 6.9 7.5 7.5 7.8 8.1 8.8 8.6 8.9 9.2 10.0 9.6 10.0 10.4 11.3 10.7 11.1 11.5 12.5 11.8 12.2 12.7 13.8 12.8 13.4 13.9 15.0 13.9 14.5 15.0 16.3 15.0 15.6 16.2 17.5 Specification 1500883 Table 71 SCS-862 Series Cable Simulators Specifications Model P/N 54 SCS-862-02 724785 1.0 SCS-862-03 724905 1.0 SCS-862-04 724825 1.0 SCS-862-05 724730 1.0 SCS-862-06 724887 1.0 SCS-862-07 724912 1.0 SCS-862-08 724938 1.0 SCS-862-09 724903 1.0 SCS-862-10 724902 1.0 SCS-862-11 725011 1.0 SCS-862-12 724971 1.0 SCS-862-13 724959 1.0 SCS-862-14 725023 1.0 SCS-862-15 724967 1.0 Passband Flatness: ±0.4dB (SCS-862-02 to 13) ±0.6 dB (SCS-862-14 and 15) Return Loss I/O: 8/16dB (SCS-862-02 to 13) 16/16 dB (SCS-862-14 and 15) Insertion Loss in dB at Frequency (MHz) 70 80 222 550 750 806 862 1.0 1.0 1.3 1.7 1.9 2.0 2.0 1.0 1.0 1.6 2.4 2.8 2.9 3.0 1.1 1.2 1.9 3.2 3.8 3.9 4.0 1.0 1.1 2.3 3.9 4.7 4.9 5.0 1.0 1.2 2.6 4.6 5.5 5.8 6.0 1.2 1.4 3.1 5.2 6.3 6.6 7.0 1.3 1.4 3.3 6.0 7.3 7.6 8.0 1.3 1.6 3.7 6.6 8.1 8.5 9.0 1.4 1.6 3.9 7.3 9.0 9.4 10.0 1.5 1.7 4.4 8.0 10.0 10.3 11.0 1.5 1.7 4.8 8.7 10.9 11.4 12.0 1.5 1.8 5 9.5 11.9 12.4 13.0 1.6 1.9 5.5 10.0 12.9 13.4 14.0 1.7 2.0 5.9 10.6 13.7 14.3 15.0 dB of Cable Simulated at Frequency (MHz) 300 450 550 750 806 862 0.7 0.8 1.0 1.2 1.2 1.3 1.3 1.7 1.9 2.3 2.5 2.6 2.0 2.6 2.9 3.5 3.8 3.9 2.7 3.4 3.9 4.7 5.0 5.2 3.3 4.2 4.8 5.7 6.2 6.4 4.3 5.4 6.0 7.1 7.4 7.7 5.0 6.2 6.9 8.2 8.6 8.9 5.7 7.1 7.9 9.4 9.8 10.2 6.4 8.0 8.9 10.6 11.1 11.5 7.1 8.9 9.9 11.8 12.3 12.8 7.9 9.8 11.0 13.1 13.6 14.1 8.6 10.7 12.0 14.3 14.8 15.4 9.3 11.5 12.9 15.4 16.0 16.6 10.0 12.4 13.9 16.6 17.3 17.9 Specification Document Number 600662 1513173 Rev C HFC Product Accessories Reference Guide 52 Table 72 SCS-*-R Series Forward Cable Simulators Specifications Insertion Loss in dB at Frequency (MHz) Model Part Number 40 SCS-1-R 531161-001-00 -1 45 50 72 108 150 211 250 300 350 400 450 550 750 870 1003 -1 -1 -1.1 -1.1 -1.2 -1.3 -1.4 -1.5 -1.6 -1.6 -1.7 -1.8 -2 -2.1 -2.2 SCS-2-R 531161-002-00 -0.9 -1 -1 -1.2 -1.3 -1.5 -1.7 -1.8 -2 -2.1 -2.2 -2.4 -2.6 -3 -3.2 -3.5 SCS-3-R 531161-003-00 -0.9 -0.9 -1 -1.2 -1.4 -1.7 -2 -2.2 -2.5 -2.7 -2.8 -3 -3.4 -4 -4.3 -4.7 SCS-4-R 531161-004-00 -0.9 -0.9 -1 -1.3 -1.5 -1.9 -2.4 -2.7 -2.9 -3.2 -3.5 -3.7 -4.2 -5 -5.4 -5.9 SCS-5-R 531161-005-00 -0.8 -0.9 -1 -1.4 -1.6 -2.2 -2.7 -3.1 -3.4 -3.8 -4.1 -4.4 -5 -6 -6.5 -7.2 SCS-6-R 531161-006-00 -0.8 -0.9 -1 -1.4 -1.8 -2.4 -3.1 -3.5 -3.9 -4.3 -4.7 -5.1 -5.8 -7 -7.7 -8.4 SCS-7-R 531161-007-00 -0.7 -0.9 -1 -1.5 -1.9 -2.6 -3.4 -3.9 -4.4 -4.9 -5.3 -5.7 -6.5 -8 -8.8 -9.7 SCS-8-R 531161-008-00 -0.7 -0.9 -1 -1.6 -2 -2.9 -3.8 -4.3 -4.9 -5.4 -5.9 -6.4 -7.3 -9 -9.9 -10.9 SCS-9-R 531161-009-00 -0.7 -0.8 -1 -1.7 -2.2 -3.1 -4.1 -4.7 -5.4 -6 -6.5 -7.1 -8.1 -10 -11 -12.1 SCS-10-R 531161-010-00 -0.6 -0.8 -1 -1.7 -2.3 -3.3 -4.5 -5.1 -5.9 -6.5 -7.2 -7.8 -8.9 -11 -12.1 -13.4 Table 73 T-CS-*-Q Series Cable Simulators Specifications Specification Frequency T-CS-2-Q T-CS-4-Q T-CS-6-Q T-CS-8-Q T-CS-10-Q (MHz) Cable Simulator 1218 2.0 4.0 6.0 8.0 10.0 Value (dB nominal) Drop Insertion 5 0.1 0.1 0.1 0.1 0.1 Loss* (dB max.) 50 0.1 0.1 0.2 0.2 0.3 85 0.2 0.2 0.3 0.3 0.5 104 0.2 0.3 0.5 0.5 0.7 300 0.6 1.4 1.9 2.2 3.1 450 1.0 2.2 3.0 3.7 5.1 550 1.3 2.7 3.7 4.7 6.3 750 1.7 3.4 4.9 6.5 8.4 870 1.9 3.8 5.5 7.5 9.3 1000 2.1 4.1 6.1 8.3 10.2 1218 2.3 4.4 6.7 9.3 11.0 Forward Response -- Flatness (dB max.) ± 0.5 ± 0.5 ± 0.5 ± 0.5 ± 0.7 *The insertion loss specifications shown are in addition to the tap value loss. T-CS-12-Q 12.0 0.1 0.3 0.6 0.8 3.3 5.4 6.8 9.2 10.5 11.7 12.7 ± 0.7 T-CS-15-Q 15.0 0.1 0.3 0.6 1.0 3.9 6.5 8.1 11.3 13.3 1.2 1.1 ± 0.7 T-CS-18-Q 18.0 0.1 0.3 0.7 1.1 4.5 7.4 9.4 13.2 15.7 18.2 19.0 ± 0.8 T-CS-21-Q 21.0 0.1 0.4 0.9 1.3 5.3 8.6 11.0 16.0 18.8 21.0 21.5 ± 0.8 1513173 Rev C HFC Product Accessories Reference Guide 53 INPUT CONFIGURATION MODULES AND OUTPUT DISTRIBUTION ACCESSORIES SPECIFICATIONS Directional couplers, also known as TAPs, split the RF signal into unequal portions, routing the low loss and high loss signals to different legs of the plug-in location. By rotating SDC8, SDC12, 7-DC-8, and 7-DC-12 180°, the signal flow is reversed. Splitters deliver half the RF signal to each leg of the plug-in location. The SPB-0 and NPB-0 are throughput plug-ins that do not effect the signal. Table 74 D-Series Splitters and Directional Couplers (TAPs) Specifications Model 7-DC-4-5-1000-WC 7-DC-8-5-1000-WC 7-DC-12-5-1000-WC P/N 724247 724754 724771 Description Splitter Directional coupler (TAP) Directional coupler (TAP) Insertion Loss 4/4 dB 8/2.6dB (±0.5dB) 11.9/1.8 dB (±0.5dB) Table 75 S-Series Distribution Accessories Specifications Model P/N Description Insertion Loss in dB at Frequency (MHz) 5 40 54 70 80 222 550 750 862 1002 NPB-0 NPB-xxx jumper 0 0 0 0 0 0 0 0 0 0 SPB-0 162260-00 jumper 0 0 0 0 0 0 0 0 0 0 SS-1000-2 723993 splitter 3.5 3.3 3.3 3.3 3.3 3.5 3.7 3.8 4.0 4.2 SDC-1000-8 724186 directional 1.7 1.4 1.4 1.4 1.5 1.6 1.8 2.0 2.6 2.7 coupler 8.2 8.1 8.1 8.1 8.1 8.2 8.2 8.2 8.5 8.6 SDC-1000-12 724268 directional 0.9 0.7 0.7 0.7 0.7 0.8 1.0 1.3 1.7 1.8 coupler 12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.4 12.5 Passband Flatness: 0.5dB, PV The recessed groove indicates the high loss leg. These accessories are reversible. Specification Document Number 600613 Model Part Number SP120 531230-001-00 Table 76 SP/DC-120 Distribution Accessories Specifications Description Splitter Port Common Through Passband (MHz) Return Loss (dB) Insertion Loss Max. (dB) 5-1218 5-1218 20@5200 MHz 16@201400 MHz 12@4011218 MHz 20@5400 MHz 16@401600 MHz 12@6011000 MHz 10@10011218 MHz 4.7@1000 MHz 5@1218 MHz 4.7@1000 MHz 5@1218 MHz Flatness P-V (dB) 51218 MHz 0.3 0.3 Isolation (dB) 51218 MHz 17 17 Tilt (dB) 51218 MHz 1.5 1.5 54 HFC Product Accessories Reference Guide 1513173 Rev C Table 76 SP/DC-120 Distribution Accessories Specifications (cont'd) Model Part Number Description Port Passband (MHz) DC120/8 531230-002-00 8dB Directional Coupler Input Output Coupled 5-1218 5-1218 5-1218 DC120/10 531230-003-00 10dB Directional Coupler Input Output Coupled 5-1218 5-1218 5-1218 DC100/12 531230-004-00 12dB Directional Coupler Input Ouptut Coupled 5-1218 5-1218 5-1218 Return Loss (dB) 12 17 16 14 14 14 14 17 16 Insertion Loss Max. (dB) Flatness P-V (dB) 51218 MHz 3.3 (Input to Output, 1000MHz, 1218 MHz) -- 8.5 (Input to Coupled, 1000 MHz) 9.0 (Input to Coupled, 1218 MHz) 3.3 (Input to Output, 1000MHz, 1218 MHz) -- 10.5 (Input to Coupled, 1000MHz, 1218 MHz) 2.2 (Input to Output, 1000MHz, 1218 MHz) -- 12.5 (Input to Coupled, 1000MHz, 1218 MHz) 0.5 (Input to Output) -- 1.3 (Input to Coupled) 0.5 (Input to Output) -- 1.4 (Input to Coupled) 0.5 (Input to Output) -- 1.6 (Input to Coupled) Isolation (dB) 51218 MHz 17 17 17 Tilt (dB) 51218 MHz 1.5 (Input to Output) -- 2.0 (Input to Coupled 19 1.5 (Input to Output) 19 -- 19 2.5 (Input to Coupled 18 1.5 (Input to Output) 18 -- 18 3.0 (Input to Coupled Table 77 Splitter Specifications Model P/N S3.5/3.5 724486 Bandwidth: 5-862MHz Insertion Loss: 2 x 3.8dB (max., 862MHz) Flatness: ±0.25dB Return Loss: >20dB (47MHz) to 1.5dB/oct. (>20dB (<47MHz)) Isolation (out 1out 2): >20dB Dimensions L x H: 30 x 37.7mm Model TAP10/1 TAP1/10 TAP8/1.5 1513173 Rev C P/N 724717 725693 724779 Table 78 TAPs Specifications Insertion Loss: Out 1/Out 2, dB 10.5/1.5 1.5/10.5 2/8.5 HFC Product Accessories Reference Guide 55 Table 78 TAPs Specifications Model P/N Insertion Loss: Out 1/Out 2, dB TAP16/1 724829 16.5/1 TAP1/16 725858 1/16.5 Bandwidth: 5-862MHz Flatness: ±0.25dB Return Loss: >20dB (47MHz) to 1.5dB/oct. (>20dB (<47MHz)) Isolation (out 1out 2): >20dB Dimensions L x H: 30 x 37.7mm DIPLEX FILTERS SPECIFICATIONS Diplex filters split the RF frequency, routing the low frequency to the return path and the high frequency to the forward path, with minimal signal loss. Select the diplex filter with the same frequency split as your network. Table 79 42/54 MHz Diplex Filters (p/n 1504997) Specifications Specification Insertion Loss, dB (typical) Return Loss, dB (typical) Isolation, dB (typical) Forward 1.17@54 MHz 0.41@750 MHz 0.41@862 MHz 0.74@1002 MHz 25.6@54850 MHz 23.5@8501002 MHz 40.2@4254 MHz 55.1@54250 MHz 47.2@250555 MHz 37.7@555750 MHz 32.6@7501002 MHz Return 1.3@42 MHz 26.6@542 MHz 49.8@542 MHz Table 80 85/102 MHz Diplex Filters (p/n 1508618) Specifications Specification Insertion Loss, dB (typical) Return Loss, dB (typical) Isolation, dB (typical) Forward 1.3@102 MHz 0.3@770 MHz 0.4@862 MHz 0.5@1002 MHz 23@102140 MHz 1401002 MHz 31.5@85105 MHz 52@102195 MHz 48@195600 MHz 41@600770 MHz 36@7701002 MHz Value 1.2@85 MHz 22@550 MHz 18@5085 MHz 53@585 MHz Specification 1508883-001, 42/54 MHz Filter Bandwidth, MHz Insertion Loss @ cut off, dB Table 81 1508883 Series Diplex Filters Specifications Forward 541218 1.1 max. Return 542 1.1 max. 56 HFC Product Accessories Reference Guide 1513173 Rev C Table 81 1508883 Series Diplex Filters Specifications (cont'd) Specification Insertion Loss@1.2 GHz, dB Flatness, dB Roll-off, Low, dB Roll-off, High, dB Return Loss, dB Floor Isolation, dB Crossover Isolation, dB Group Delay, nSec 1508883-002, 65/85 MHz Filter Bandwidth, MHz Insertion Loss @ cut off, dB Insertion Loss@1.2 GHz, dB Flatness, dB Roll-off, Low, dB Roll-off, High, dB Return Loss, dB Floor Isolation, dB Crossover Isolation, dB Group Delay, nSec 1508883-003, 85/102 MHz Filter Bandwidth, MHz Insertion Loss @ cut off, dB Insertion Loss@1.2 GHz, dB Flatness, dB Roll-off, Low, dB Roll-off, High, dB Return Loss, dB Floor Isolation, dB Crossover Isolation, dB Group Delay, nSec 1508883-004, 204/258 MHz Filter Bandwidth, MHz Insertion Loss @ cut off, dB Insertion Loss@1.2 GHz, dB Flatness, dB Roll-off, Low, dB Roll-off, High, dB Forward 0.95 max. 0.8@541218 MHz 0.8@5485 MHz 0.35@10021218 MHz 22@54750 MHz 20@7501218 MHz 50@54600 MHz (min.) 45@6001002 MHz (min.) 40@10021218 MHz (min.) 37@4254 MHz (min.) 18@55.2558.83 MHz (max.) 851218 1.0 max. 0.95 max. 0.7@851218 MHz 0.7@85115 MHz 0.35@10021218 MHz 22@85750 MHz 19@7501218 MHz 50@85600 MHz (min.) 45@6001002 MHz (min.) 40@10021218 MHz (min.) 37@6585 MHz (min.) 9@6263.5 14@63.565 1021218 1.2 max. 0.9 max. 0.9@1021218 MHz 0.9@102200 MHz 0.3@10021218 MHz 22@102750 MHz 19@7501218 MHz 50@102600 MHz (min.) 45@6001002 MHz (min.) 40@10021218 MHz (min.) 37@6585 MHz (min.) 14.5@103.25106.85 5.5@112.25116.68 2581218 1.0 max. 0.9 max. 0.7@2581218 MHz 0.8@258285 MHz 0.3@10021218 MHz Return -- 0.6@542 MHz 0.85@2742 MHz -- 22@542 MHz 50@542 MHz (min.) -- 11@3940.5 20@40.542 565 1.1 max. -- 0.6@565 MHz 0.7@5065 MHz -- 22@565 MHz 50@565 MHz (min.) -- 4@112.25116.68 MHz (max.) 585 1.2 max. -- 0.7@585 MHz 0.9@6065 MHz -- 22@585 MHz 50@585 MHz (min.) -- 8@8283.5 MHz (max.) 11@83.585 MHz 5204 1.0 max. -- 0.6@5204 MHz 0.7@170204 MHz -- 1513173 Rev C HFC Product Accessories Reference Guide 57 Specification Return Loss, dB Floor Isolation, dB Crossover Isolation, dB Group Delay, nSec Table 81 1508883 Series Diplex Filters Specifications (cont'd) Forward 22@258600 MHz 19@6001218 MHz 50@258600 MHz (min.) 45@6001002 MHz (min.) 40@10021218 MHz (min.) 37@204258 MHz (min.) 5@259.25263.68 Return 22@5204 MHz 50@5204 MHz (min.) -- 7@198204 MHz (max.) Table 82 Diplex Filter Specifications Model D30/47 D42/54 D55/70 D65/85 P/N 725171 725483 772506 724120 Table 83 Diplex Filter for FM401 Specifications Model D30/47 D42/54 D55/70 D65/85 D85/105 P/N 761846 761845 761844 725932 791127 Active and Passive Return Channel Amplifier The module RCA3-Z is a universal reverse path amplifier for Flex Max 400 and Flex Max 500 amplifiers. The functional adjustment possibilities enable a universal usage in HFC networks. All adjustments can be performed by Amini PADs. A switchable attenuator enables a reduction of the gain by 6 dB. The roll off caused by the diplex filters is compensated by special circuitry, where the gain at the higher frequency is increased by 1.5 dB. The whole range from 5 MHz to 30/42/65 MHz can be used for reverse path signals. 1513173 Rev C HFC Product Accessories Reference Guide 58 Table 84 RCA3-Z Active Return Channel Amplifiers Specifications Model P/N RCA3-Z 25/65 724110 RCA3-Z 25/55 772505 RCA3-Z 25/42 725656 RCA3-Z 25/30 725440 Bandwidth Gain (module input to output) Flatness Combiner insertion loss Return Loss Noise Figure Attenuator Input/Output Interstage Equalizer (5-65MHz) Power Consumption Power Supply Operating Temperature Dimensions L x H 530 MHz ±0.25 dB < 4.5 dB 20 dB < 6 dB Amini plug-in modules 0,1,2,...20dB (switchable with a Jumper) 0,6dB Amini plug-in modules 0,1,2,...20dB < 1.5 W 24 VDC/60 mA 20°C to 75°C 75 x 42mm Table 85 RCEQ-Z Passive Return Channel Equalizer Specifications Model P/N RCEQ-Z-2/65 Bandwidth 725973 Return Loss Insertion Loss: 1 input/2 input config. Slope: delta insertion loss (565MHz) flatness: Attenuator Power Consumption Input Splitter Dimensions L x H 565 MHz 20 dB 1.0dB @ 65MHz/5.0dB @ 65MHz Amini plug-in modules (1dB steps) 020dB (measured in station Max-Amplif. incl. D65/85MHz) 0.25 dB Amini plug-in modules (1dB steps) < 1.5 W on board 1 input/2 input config. via bridges 75 x 42mm 1513173 Rev C HFC Product Accessories Reference Guide 59 AUTOMATIC GAIN CONTROL (AGC) MODULES SPECIFICATIONS Table 86 AGC Modules Specifications Model P/N AGC030/191.25 AGC030/189.25 AGC030/182.25 AGC030/175.25 758515 724714 725108 758642 FREQUENCY CORRECTION MODULES SPECIFICATIONS Within a longer cascade of amplifiers and passive network components it can be necessary to correct irregularities of the frequency response. The CM862/xx is a plug-in module that equalizes the frequency response of longer cascades or non-optimal transmitter-node combinations with two bumpers and two debumpers, which can be shifted in frequency and amplitude. One of each is responsible for the high and low frequency ranges. An additional fixed bump in the CM862/85 MHz, CM862/54 MHz, and CM862/47 MHz modules compensates the roll off of 4 diplexers (i.e. one CM862 is enough for 2 amplifiers). Model CM862/00 CM862/85 CM862/54 CM862/47 P/N 772504 724571 772503 772502 Table 87 CM862 System Equalizer Specifications P/N 1504415-001 1504416-001 1503691-001 1503691-002 Table 88 Fixed-Value EDB Response Equalizers Specifications Attenuated Range 54 to 1002MHz 45 to 1002MHz 54 to 1002MHz 45 to 1002MHz Max. Bump or Trap Size 3.5 dB 3.5 dB 3.5 dB 3.5 dB Location of Bump or Trap 54 to 1002MHz 950 to 1002MHz 54 to 1002MHz 950 to 1002MHz 1513173 Rev C HFC Product Accessories Reference Guide 60 HFC Product Accessories Reference Guide Example Peak-to-Valley Response for Haystacks (727397/789316/761842) Example Peak-to-Valley Response for Peaking Circuits (727398/761843) Ordering Information To configure a product that meets your specific needs, or for any questions, please contact your ARRIS Sales Professional. You may visit http://www.commscope.com/Support for additional support options. If you do not have a user ID and password or have forgotten your password, please click the Create/Update Membership button. Revision A B C Date 03/2019 11/2019 10/2020 Revision History Reason for Change Initial Agile release. Revised to correct insertion Loss for CBSM-1G-07 at 900 MHz to 6.37 dB. Revised to support BLE120 and MB120 1.2 GHz amplifiers and accessories. © 2020 CommScope, Inc. All rights reserved. ARRIS and the ARRIS logo are trademarks of CommScope, Inc. and/or its affiliates. All other trademarks are the property of their respective owners. No part of this content may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from CommScope, Inc and/or its affiliates ("CommScope"). CommScope reserves the right to revise or change this content from time to time without obligation on the part of CommScope to provide notification of such revision or change. 1513173 Revision C www.arris.comAcrobat Distiller 10.1.16 (Windows)