SMARTPAK II COMMUNICATION RESET INSTRUCTIONS configuration of the Smartpak II is to record and transmit sensor data at 5-minute and 60-minute intervals, respectively when it is connected to a stable cellular network. The Smartpak II device can be effectively reset per the instructions below. Wait to see a solid Green LED light.
SMARTPAK II COMMUNICATION RESET INSTRUCTIONS. IF THE DRY SHIPPER DOES NOT EMIT VAPOR WHEN PLUG IS REMOVED.
SCIENCE. LOGISTICS. CERTAINTY. SMARTPAK II® COMMUNICATION RESET INSTRUCTIONS SMARTPAK II® COMMUNICATION RESET INSTRUCTIONS ADVANCED THERAPY SHIPPERTM Default configuration of the Smartpak II® is to record and transmit sensor data at 5-minute and 60-minute intervals, respectively when it is connected to a stable cellular network. The Smartpak II® device can be effectively reset per the instructions below. STEP 1 Continuously tap and release the touch sensitive button at the frequency of one tap per 3 seconds until the Network LED light turns on -- regardless of what the color is (Red or Green). It should take approximately 5 taps for the Network LED light to turn on. Network LED Light Touch Sensitive Button STEP 2 Wait to see a solid Green LED light. After 5 minutes, refresh your Live ViewTM link. The queued-up data should fully be displayed up to the timestamp you executed in Step 1. PLEASE NOTE: The Network LED light may be "blinking" RED. The blinking could last up to one minute (depending on the cellular coverage condition) before it changes to a solid Green. IF THE DRY SHIPPER DOES NOT EMIT VAPOR WHEN PLUG IS REMOVED PLEASE CONTACT CUSTOMER SERVICE IMMEDIATELY, BY CALLING (949) 470-2305 OR EMAIL CS@CRYOPORT.COM FORM-1036 Rev. A DCN-1163 Effective Date: 04/07/2021Adobe Illustrator 25.2 (Windows) Adobe PDF library 15.00