User Manual for pTron models including: B09KYDNSHC, Bassbuds Tango ENC TWS Earbuds, B09KYDNSHC Bassbuds Tango ENC TWS Earbuds, Earbuds
Smart Power O: Touch TSA on both the earbuds for 5 seconds Or Keep both the earbuds into the charging case and close the charging case lid properly View
pTron Bassbuds Tango ENC (Environmental Noise Cancellation), Dedicated Movie Mode, 40Hrs Total Playtime, Bluetooth 5.1 Wireless Headphones, Deep Bass, Touch Control TWS & Type-C Fast Charging (Black) : Amazon.in: Electronics
pTron Bassbuds Tango ENC TWS Earbuds User Manual Buon Descripton: Cauon: pTron Bassbuds Tango" is set at 60% default volume, and the earbuds do not support volume adjustment. Please control the volume through the phone. Touch Sensive Area (TSA) Smart Power On & Pairing: 1. Open the charging case lid, earbuds will switch ON. 2. Wait for 2-3 seconds unl L & R earbud pair to each other. 3. Turn on the Bluetooth on your phone & search for "pTron TWS" to connect with the device. Mode Change: Touh TSA on the Right earbud for 2-3 seconds to change the modes - Movie Mode and Music Mode. Note: TSA stands for Touch Sensive Area Smart Power Off: Touch TSA on both the earbuds for 5 seconds Or Keep both the earbuds into the charging case and close the charging case lid properly. Note: TSA stands for Touch Sensive Area Connecvity Bluetooth - Automac: 1. Just open the charging case, take out both the earbuds & buds will switch ON. 2. Earbuds will automacally connect to the last connected device (Instant wake & pair technology). Note: The last connected device must be in 10meters wireless range and Bluetooth funcon must be On. Calling or Music through Mono & Dual Buds: Mono Bud Use - J Just place the right or le earbud back into the charging case and close the charging case lid. Dual Buds Use - Use le & right earbuds together. Voice Assistant Acvaon: Touch TSA on le earbud for 2-3 seconds. Note: TSA stands for Touch Sensive Area Call & Music Funcons: Answer/Hangup a Phone Call - Touch TSA on either earbud once. Reject a Phone Call - Long Touch TSA on either earbud. Music Play/Pause - Touch TSA on either earbud once. Next Song - Touch TSA on Right earbud twice. Previous Song - Touch TSA on Le earbud twice. Note: TSA stands for Touch Sensive Area Charging the Earbuds: 1. Place both the earbuds into the charging case properly and close the lid. The earbuds will power off automacally when placed into the case and it will start charging. 2. The Blue LED indicator on the charging case will be steady during charging the earbuds and the earbuds will show Red LED light during charging. Charging the Case: 1. Connect the Type-C cable end to the charging case and the USB end to a 5V power source. 2. The Red LED indicator will blink during charging. 3. Charging case will get fully charged in 1-1.5 hrs me. The LED indicator light will be steady Red. Remove the case from the power supply. Red LED light will turn to Blue and switch off in 3-5 seconds. Troubleshoong Scenario 1: One Earbud is Not Working 1. Place both the earbuds in the charging case and close the lid properly. 2. Take out both the earbuds together from the charging case. 3. Wait unl L & R earbud pair to each other. Aer successful matching, only 1 earbud will flash Blue & Red light. 4. Turn ON the Bluetooth on your phone, search for "pTron TWS" & connect. Troubleshoong Scenario 2: Earbuds Not Connecng/Scanning 1. Place both the earbuds in the charging case and close the lid properly. 2. Unpair the Bluetooth device with the connected device. 3. Take out both the earbuds together from the charging case. 4. Restart your Bluetooth device. 5. Now, search for "pTron TWS" on your device & pair it with the Bluetooth device & then connect it. Troubleshoong Scenario 3: Earbuds Disconnecng During a Phone Call 1. Charge earbuds 100% before use. 2. Restart the earbuds and reconnect with your device. Safety Precauons: 1. Please keep this device away from extreme heat, liquids, humidity or corrosive environment. 2. Please don't over-charge the product as it will decrease the service life of baery. 3. Using incompable USB cable or high voltage chargers can damage the product & void the product warranty. We strongly recommend using a good quality DC5V-1A chargers & the USB cable included in the package. 4. This product or the Bluetooth funcon should not be used during charging. 5. Don't jam the ports such as charger port, LED port, etc. 6. It is recommended to ulize the product below the maximum volume in order to protect hearing and extend the ear-buds' service life. 7. Please don't open/temper the product or product's baery. 8. Please keep the product out of children's reach. 9. Dispose the product responsibly and adhere to your local authority guidelines. Disclaimer: The colors and specificaons shown/menoned in the user manual may differ from the actual product. The images shown are for representaon purposes only. Other product logos and company names menoned herein may be trademarks or trade names of their respecve owners.Adobe PDF library 15.00 Adobe Illustrator(R) 24.0