User Manual for BROWAN models including: L0001, 2AAS9-L0001, 2AAS9L0001, L0001 MerryIoT Hotspot Miner V1, MerryIoT Hotspot Miner V1, Miner V1

User manual

Users Manual

BROWAN COMMUNICATIONS INCORPORATION L0001 MerryIoT Hotspot Miner V1 2AAS9-L0001 2AAS9L0001 l0001

Not Your Device? Search For Manuals / Datasheets:

File Info : application/pdf, 21 Pages, 698.07KB

Document
Current View
GetApplicationAttachment.html?id=5546308
Browan Communications Inc. No.15-1, Zhonghua Rd., Hsinchu Industrial Park, Hukou, Hsinchu, Taiwan, R.O.C. 30352 Tel: +886-3-6006899 Fax: +886-3-5972970
Document Number BQW_02_XXXXXX
MerryIoT Hotspot Miner V1 Model:L0001 User Manual

Revision History

Revision Date

.001

Oct. 21, 2021

Description First release

Author Vincent

GNMS USER GUIDE
Copyright
 2021 BROWAN COMMUNICATIONS INC. This document is copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of BROWAN COMMUNICATIONS INC.
Notice
BROWAN COMMUNICATIONS INC. reserves the right to change specifications without prior notice. While the information in this manual has been compiled with great care, it may not be deemed an assurance of product characteristics. BROWAN COMMUNICATIONS INC. shall be liable only to the degree specified in the terms of sale and delivery. The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from BROWAN COMMUNICATIONS INC.
Trademarks
The product described in this document is a licensed product of BROWAN COMMUNICATIONS INC..

GNMS USER GUIDE
Contents
REVISION HISTORY .............................................................................................................................. 1
COPYRIGHT ........................................................................................................................................... 2
NOTICE................................................................................................................................................... 2
TRADEMARKS....................................................................................................................................... 2
CONTENTS ............................................................................................................................................ 3
CHAPTER 1  INTRODUCTION ............................................................................................................ 4
Purpose and Scope ............................................................................................................................. 4 Product Design .................................................................................................................................... 4 Product Features ................................................................................................................................. 4 System Architecture ............................................................................................................................ 5 Definitions, Acronyms and Abbreviations............................................................................................ 5 Reference ............................................................................................................................................ 5
CHAPTER 2  HARDWARE DETAILS .................................................................................................. 6
LED Indicators ..................................................................................................................................... 6 I/O Ports .............................................................................................................................................. 7 Back Label........................................................................................................................................... 8 Package Label..................................................................................................................................... 9 Package Content ................................................................................................................................. 9
CHAPTER 3  SYSTEM SPECIFICATION .......................................................................................... 11
Hardware Specification ..................................................................................................................... 11 LoRa Specification ............................................................................................................................ 12 LoRa RF Specification....................................................................................................................... 12 Software Specification....................................................................................................................... 12
3.1 Configuration/Performance/Capability.....................................................................................12 3.2 Basic Features.........................................................................................................................13 3.3 LoRaWAN features..................................................................................................................14 Regulatory Specification.................................................................................................................... 14 Reliability Specification...................................................................................................................... 14
CHAPTER 4  USER MANUAL ........................................................................................................... 15
4.1 Connect Femto Lite ..................................................................................................................... 15 4.2 Femto Lite Setting ....................................................................................................................... 15
STEP 1 : SET WAN .......................................................................................................................15
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT................................ 19

GNMS USER GUIDE
Chapter 1  Introduction
Purpose and Scope
MerryIoT Hotspot Miner V1 is designed for edge computing applications in IoT, Smart Manufacturing, Automation, Blockchain and etc, to support high performance, high reliability and high throughput for the heavy data processing demand. MerryIoT Hotspot Miner V1 is targeting at AIoT applications with quad A55 cores, G52 GPU hardware, based on Linux distribution. IoT solution providers can easily integrate advanced and stable functions for their application-centric development on their own IoT projects.
Product Design
The dimension of L0001 Helium Hotspot Miner V1 is with the dimension of 140 x 110 x 24 mm, and with one LAN port, one USB port, One TF card and 12V1A power input, four LED indicators, and one reset button.
Product Features
 Up to 8 concurrent channels for LoRa transmission

GNMS USER GUIDE
 Built-in 2.4G 802.11b/g/n Wireless LAN, and Bluetooth 5.2  Various Internet connection: Ethernet, WiFi  Support LoRaWan 1.0.3 packet forwarder and Basic Station mode  Ethernet/WiFi Configuration through APP  Support BROWAN OTA  Externalantennas for LoRa and internal antenna for WiFi connection
System Architecture

Definitions, Acronyms and Abbreviations

Item LPWAN
LoRaWANTM
ABP OTAA TBD

Description
Low-Power Wide-Area Network LoRaWANTM is a Low Power Wide Area Network (LPWAN) specification intended for wireless battery-operated Things in a regional, national or global network. Activation by Personalization Over-The-Air Activation To Be Defined

Reference
Document LoRaWAN Specification v1.0.3 RP002-1.0.1 LoRaWAN Regional Parameters LoRaWAN Backend Interfaces Specification v1.0

Author
LoRa Alliance LoRa Alliance LoRa Alliance

GNMS USER GUIDE

Chapter 2  Hardware Details

LED Indicators
LED sequence: Power(System), Internet,WiFi, LoRa,BT.
Four Green, One White
Solid LED is for static status, blanking means system is upgrading or active devices linked to the corresponding port

Solid On

Bl i nki ng

Of f

Pow er Syst em(Green)

Power ON

Boot ing/ OTA

Power Of f

Int ernet (Green)

Int ernet available

Check Int ernet

RFU

Wi r el ess( Gr een)

Wireless connect ed t o root AP

RFU

Wireless NOT connect ed t o root AP

LoRa( Gr een) BT(Whit e)

LoRa is working

Init ialing

BT Advert ising

BT But t on pr essed

Table 1 LED Behaviors

LoRa is not working No BT Advert ising

GNMS USER GUIDE

Figure 1  IO Ports
I/O Ports
Port RJ45 Reset USB TF Card

Coun t 1
1
1

Description
WAN port of the device Reset to default (5 seconds to reset settings to factory default) Power input via USB adaptor(5VDC/2A)

GNMS USER GUIDE Figure 2  IO Ports
Back Label
The marking information is located at the bottom of apparatus.

GNMS USER GUIDE

Figure 3  Back Label

Package Label

N Item o.

Description

1 Product BOX Gift Box

2 Labeling

Model/ MAC/ Serial Number/ Type Approval

Package Content
N Description o.

Quantity

GNMS USER GUIDE

1 MerryIoT Hotspot Miner V1

1

2 Power adapter (12V/1A)

1

3 LoRa Antenna and Base

1

Chapter 3  System Specification

Hardware Specification

No. Item 1 CPU 2 Memory 3 Storage 4 LoRa radio 5 W-Fi radio 6 BLE radio 7 Crypto chip 8 LAN interface 9 TF 10 USB 11 LEDs
12 Button 13 Console 14 Environment
15 IP ratings 16 Size 17 Power Note

Description - Rockchip RK3566 - Quad-core Cortex-A55 up to 1.8GHz - DDR3/4 4GB - eMMC 32GB - US 915 SKU - External SMA antenna - 2.4GHz 1Tx/1Rx 802.11 b/g/n - Built-in antenna - 2.4GHz BLE 5.2 - Built-in antenna - I2C control - Microchip ATECC608A/B in SOIC-8 and UDFN-8 - RJ45 1Gbps x 1 - External TF card slot - Supports SDXC or higher speed - External USB-A 2.0 connector - Reserved for future use - Logo - Single colored LED indicator (green) x 4
 Power  Status  System  Wi-Fi - Push button (GPIO) - Debug UART console - Temp. operating -10C ~ +40C ambient - Storage -20C ~ +70C ambient - Humidity operating 5%RH ~ 95%RH (non-condensed relative humidity) - Altitude operating 0 ~ 3000 Meters - IP42 (plastic enclosure) - 140x110x20 mm - DC jack - DC12V 1~1.5A

LoRa Specification

No. Item 1 Channels 2 Chipset 3 Bandwidth 4 Power 5 Antenna 6 Interface 7 GPIOs 8 Form Factor
9 Channel Plan -US915

Description

US915 (known as US902-928)

SX1302+SX1250 (x2)

125KHz/ 500KHz

5VDC, 500mA (typical)

1 ipex connector on board for external antenna

SPI for data communication

To control SX1262 (chip select)

- Mini-PCIe

- 40 x 50 (w/golden pins) x 3 mm

- Uplink

Frequency (MHZ)

Spreading Factor

 903.9  904.1

SF7BW125 to SF10BW125 SF7BW125 to SF10BW125

 904.3  904.5

SF7BW125 to SF10BW125 SF7BW125 to SF10BW125

 904.7

SF7BW125 to SF10BW125

 904.9  905.1

SF7BW125 to SF10BW125 SF7BW125 to SF10BW125

 905.3  904.6

SF7BW125 to SF10BW125 SF8BW500

Note

- Downlink
Frequency (MHZ)  923.3  923.9  924.5  925.1  925.7  926.3  926.9  927.5  923.3

Spreading Factor SF7BW500 to SF12BW500 (RX1) SF7BW500 to SF12BW500 (RX1) SF7BW500 to SF12BW500 (RX1) SF7BW500 to SF12BW500 (RX1) SF7BW500 to SF12BW500 (RX1) SF7BW500 to SF12BW500 (RX1) SF7BW500 to SF12BW500 (RX1) SF7BW500 to SF12BW500 (RX1) SF12BW500 (RX2)

Software Specification

3.1 Configuration/Performance/Capability

Req. Features #

De scr ipt ion

PR- Net work 0001 Conf igurat ion

 WiFi or Et hernet swit ch Conf igurat ion

PR0002

BLE Name

MerryIoT Hotspot V1_xxxxxx where the last hex are the last 6 uppercase hex of the MAC address.

comment

PR0003

OTA

 OTA dail y check  Browan OTA  ALi OTA   loading ?

PR0003

SSH Password

Account : root Password: Creat e by MerryIot sign key based on MAC
 8 charact ers  English uppercase and l owercase, 2~9
numbers ( def ault Skip: 0, O, 1, I, l, o )

PR0004

Gat eway Conf ig

 Net work set t ing WiFi o App  skip WiFi
  Helium on boarding

3.2 Basic Features
Req. # Features Description

PR-1001 BLE But t on

 Over 6 seconds t hen t rigger BLE provision

PR-1002 LED

 5 LEDS o Power LED o Int ernet LED o WiFi LED o LoRa LED o BT LED
 Ref er t o Table 1 LED Behavior.

PR-1003 Et hernet

 Et hernet connect ion

comment

PR-1004 WiFi St at ion

 WiFi St at ion Mode

PR-1005 BLE

 Conf igurat ion t hrough BLE

PR-1006 Debug port

 UART f or debug

PR-1007 OTA

 OTA agent

PR-1008 SW Monit or PR-1009 HW Wat chdog

 Monit or packet f orwarder  Monit or Hel ium Miner  Monit or Gat eway Conf ig
 Monit or syst em

3.3 LoRaWAN features

Req. Features #

De scr ipt ion

PR2001

Packet For w ar der

 Compat ible wit h Semt ech LoRa Packet For w ar der

PR2002

Mi ner Applicat ion

 Miner Appl icat ion

PR2003

gat eway_mf r

 Swarm key provision

PR2004

Gat eway conf ig

 WiFi Set t ing  Helium on boarding

comment

Regulatory Specification

No Item . 1 FCC/IC 2 NCC
3 CE
4 RCM

Standard
TBD TBD EN 300 328 V2.2.2(included EN 62311/EN 50665/EN 50385) EN 300 220-2 V3.1.1 EN 301 489-1 V2.2.3 EN 301 489-3 V2.1.1 EN 301 489-17 V3.2.4 EN 55032 / EN 55024 EN 62368-1 LVD TBD

Reliability Specification
No. Item 1 MTBF

Specification 300,000 @ 40

Chapter 4  User Manual
4.1 Connect MerryIoT Hotspot
You can connect to the gateway via WiFi interface which the SSID and password printed on the back label by default.
The rule of gateway SSID is MerryIoT-xxxxxx where the last digits are the last 6 digits of the MAC address The PC will fetch IP address of range 192.168.4.x except 192.168.4.1 assigned by the AP.
4.2 Hotspot Setting
Open the web browser(ex:Chrome) after connect to the gateway via IP address "192.168.4.1"
Now you can configure the gateway through the WEB UI.
STEP 1 : SET WAN
The gateway support either "Ethernet" or "Wi-Fi" connection as the internet backhaul.
Figure 4 WANconnection
STEP 1.1Ethernet Setting
Configure the IP address of WAN.[Static IP/DHCP client]

Figure 5  WAN connection
ETHERNET STATUS  The information of IP address/Subnet Mask/Gateway/DNS. ETHERNET SETTING - Configure the IP address of WAN.[Static IP/DHCP client] Static IP  Setup the IP address/Subnet Mask/Default Gateway/DNS of the static IP.
Contact to the network administrator for the static IP address information.
DHCP  The IP address/Subnet Mask/Default Gateway/DNS will be assigned by the DHCP server.

Figure 6 DHCP client
STEP 1.2Wi-Fi
Select "Wi-Fi" to be the internet backhaul connection. The gateway WiFi interface is the Access Point by default which SSID is "Femto_Lite-XXXXXX" printed on the back label. Administrator can only access to the WEB UI through the Access Point mode to configure the gateway. The gateway will be the WiFi client and won't access to the WEB UI after enable WiFi interface as the internet backhaul connection.
Figure 7  Wi-Fi connection
MANUAL CONNECTSpecify the remote AP SSID and enter the password if necessary.

Click "Join" to accept or "Cancel" to abort.
Figure 8  Wi-Fi manual connection
The gateway will scan the neighbor access point automatically. Just click the SSID for the WiFi connection.
Figure 9  Wi-Fi manual connection
Enter WiFi password if it is necessary for the connection.
Figure 10  Wi-Fi password
Click "Join" to accept or "Cancel" to abort.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one of the following measures:

-

Reorient or relocate the receiving antenna.

-

Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from thatto which the receiver is

connected.

-

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE: Radiation ExposureStatement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Country Code selection feature to be disabled for products marketed to the US/CANADA

Operation of this device is restricted to indoor use only

Industry Canada statement:

This devicecontains licence-exempt transmitter(s)/receiver(s) thatcomplywith Innovation, Science and EconomicDevelopmentCanada's licence-exempt RSS(s). Operationissubject to the followingtwoconditions:

(1) This devicemay not cause interference (2) This device must acceptanyinterference, includinginterferencethatmay cause undesiredoperation of the device

L'metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) L'appareil ne doit pas produire de brouillage;

(2) L'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.

Radiation ExposureStatement: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Dclaration

d'exposition

aux

radiations:

Cet quipement est conformeCanadalimites d'exposition auxradiations dansun environnement non

contrl. Cet quipement doit treinstall et utilis distance minimum de 20cmentre le radiateur

etvotre corps.


Acrobat Distiller 18.0 (Windows)