Brent Thompson Campbell Scientific, Inc.

Place: Campbell Scientific Inc. Date: Jan 21, 2021

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful...

Supplier’s Declaration of Conformity

FCC User Manual Compliance Statement 47 CFR part 15, Subpart B- §15.105(a) [Will also suffice for the §15.19 (a) statement] NOTE:This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide ... 1/21/2021 2:38:44 PM ...

Supplier's Declaration of Conformity - Campbell Scientific

void the user's authority to operate the equipment. Signed for and on behalf of: Place: Campbell Scientific Inc. Date: Jan 21, 2021. Name: Gary Travis Roberts. Title/Position: Manager, ...

PDF sdoc rainvue10
Supplier's Declaration of Conformity
(47 CFR § 2.1077 Compliance Information)
Product: RainVUE10
Manufacturer:
Campbell Scientific, Inc. 815 W 1800 N  Logan, UT 84321-1784  435.227.9000  435.227.9001 F www.campbellsci.com

This declaration of conformity is issued under the sole responsibility of the manufacturer for the following product(s):

Model RainVUE10

Description
SDI-12 Precipitation Sensor with Plastic Funnel

FCC User Manual Compliance Statement(s) 47 CFR part 15, Subpart B- §15.105(a) [Will also suffice for the §15.19 (a) statement] NOTE:This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. 47 CFR part 15, Subpart B- §15.21 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Signed for and on behalf of:
Place: Campbell Scientific Inc. Date: Jan 21, 2021

Name: Gary Travis Roberts Title/Position: Manager, Product Test and Compliance Tel: (435) 227-9623 E-mail: gtroberts@campbellsci.com


Power PDF Create Brent Thompson