Radio Communication Analyzer MT8821C Brochure
File info: application/pdf · 20 pages · 3.11MB
Radio Communication Analyzer MT8821C Brochure
Radio, Communication, Analyzer, MT8821C, Brochure
Product Brochure Radio Communication Analyzer MT8821C 30 MHz to 3.8 GHz 3.8 GHz to 6.0 GHz (Option) Excellent Eco Product
The Radio Communication Analyzer MT8821C is designed for R&D into mobile devices (User Equipment: UE), such as smartphones, tablets and M2M/IoT modules. It builds on the technologies of its popular predecessor, the MT88…
Full PDF Document
If the inline viewer fails, it will open the original document in compatibility mode automatically. You can also open the file directly.
Extracted Text
Product Brochure Radio Communication Analyzer MT8821C 30 MHz to 3.8 GHz 3.8 GHz to 6.0 GHz (Option) Excellent Eco Product Tomorrow's Wireless Test Capability Today The Radio Communication Analyzer MT8821C is designed for R&D into mobile devices (User Equipment: UE), such as smartphones, tablets and M2M/IoT modules. It builds on the technologies of its popular predecessor, the MT8820C used worldwide by UE and chipset vendors. It operates as a base station simulator using standard call processing sequences compliant with test standards to support a versatile test lineup, starting with RF tests. More Efficient RF Testing Supporting LTE-Advanced UE Measurement With the introduction of LTE-Advanced, wireless communications are starting to use Carrier Aggregation (CA) technology offering continuing extendibility to wider bandwidths and more frequency bands. Additionally, adoption of the latest in faster communications technologies, such as 2�2 and 4�4 Multiple Input Multiple Output (MIMO) to improve frequency usage efficiency, means that measurement technologies are also becoming increasingly complex. 3.2 Supports physical layer Gbps downlink maximum throughput PHY TPUT 3.2 Gbps measurement* Cellular Support RF measurement and IP data transfer test of IoT LTE Category M1 and NB-IoT Category NB1,2 8CA Supports LTE-Advanced 4�4MIMO 8CC 4�4 MIMO tests LAA Supports tests of 5 GHz Unlicensed Band used by LAA and LTE-U 4CA Supports LTE-Advanced 2�2MIMO 4CC 2�2 MIMO tests in one unit Supports tests of HPUE (High Power User Equipment) which is HPUE the specification to improve communication environment by increasing out put power of UE 160 MHz wide frequency bandwidth (Generator/Analyzer) supports 5G NSA Supports 5G NSA (Non-Standalone) tests by interlocking evolving UE technologies Anchor with Radio Communication Test Station MT8000A 2 *: Under the condition of 8CC 4�4 MIMO (32 layer) Wireless Communication Tester for LTE-Advanced UE Development LTE/LTE-Advanced W - CDM A / HSPA Cat-M/NB-IoT (Cat-NB1, 2) GSM/EGPRS TD - SCDM A / HSPA 3 Next-generation GUI with Large Touch Panel Enhanced GUI for Efficient Operability Better operability and visibility have been achieved using an enhanced next-generation GUI and easy-to-use large touch panel. As well as operating screens by touching and swiping, easy operation is supported by one-touch switching between grouped/individual graph lists and results outline/detail displays. Further, the efficiency of complex setting work is improved by a parameter search function, bookmarking function for commonly used parameters, and a function for setting test parameters using one-touch button operation. 4 Parameter Search HELP Display 3GPP Test Parameters Graph Screen 5 The Wireless Communication Tester for Future UE Development Easy 3GPP/3GGP2 RF measurement and flexible support for changing detailed test conditions Various fast RF calibrations offered by chipset vendors Tests of UE antenna characteristics Tests of UE power consumption Supports confirmation of dual-mode UE operation I IP data throughput, Voice, and Video tests Tests of VoLTE voice/video echoback MT8821C 6 Radio Communication Analyzer MT8821C Features RF TRX Measurement 3GPP UE RF Measurement The UE TRX characteristics must be evaluated for compliance with 3GPP/3GPP2 standards at chipset and UE development, evaluation, and acceptance testing by network operators, etc. UE circuits are becoming increasingly complex as more communications technologies and frequency bands are supported; with built-in support for the UE RF TRX tests compliant with the various communications standards, the MT8821C is the ideal test solution whatever the measurement scenario. Supported 3GPP/3GPP2 Standards Support Systems LTE FDD/TDD (DL CA 2CC/3CC/4CC/5CC/6CC/7CC/8CC, UL CA 2CC) Cat-M NB-IoT (Cat-NB1, 2) W-CDMA (HSPA, HSPA Evolution, (DB-)DC-HSDPA, 3C/4C-HSDPA, DC-HSUPA) GSM (GPRS, EGPRS) TD-SCDMA (HSPA, HSPA Evolution) RF TRX Measurements 3GPP TS 36.521-1 Chapter 6, 7 3GPP TS 34.121-1 Chapter 5, 6 3GPP TS 51.010-1 Chapter 12, 13, 14 3GPP TS 34.122 Chapter 5, 6 One-touch Settings and PASS/FAIL Judgment With preset measurement parameters based on the 3GPP RF test standard cases, the MT8821C simplifies measurement. In addition, PASS/FAIL judgment of measurement results according to the test standard conditions is automated and results are confirmed at a glance. Until now, LTE CA measurements have required complex Component Carrier (CC) settings, making operation difficult, but the MT8821C integrates multiple related parameters settings into one operation, greatly simplifying each operation stage to reduce setting operations and time. For example, only the following three steps are required using the LTE measurement software to measure the 3GPP TS 36.521-1 6.5.2.1 Error Vector Magnitude (EVM): 1 Select test parameters 2 Start measurement 3 Confirm PASS/FAIL judgment 3 1 2 3GPP RF Test Example Remote Control Sample Tool The MT8821C can be configured in an automated test system using either GPIB or Ethernet for remote control. Anritsu also provides the 3GPP RF test standard compliant automatic remote control sample tool. Operation is as simple as selecting the required test case from RF test items in the remote control sample tool, so even new users can easily configure automated test environment. Remote Control Sample Tool 7 Radio Communication Analyzer MT8821C Features RF TRX Measurement (continued) Flexible Parameter Setting The MT8821C runs TRX measurements using parameters specified by the 3GPP/3GPP2 RF test standards. In addition, flexible parameter settings support both RF parametric and a range of protocol testing. RF Calibration Recent UE designs support multiple frequency bands, requiring a lot of time for RF calibration. With high-speed measurement supported by chipsets vendors, the MT8821C increases measurement efficiency by reducing time required for RF calibration. Segment Trigger UE TX power Time Frequency change step UE RX power LTE Parameters High Efficiency with Shorter Test Time Test time is shortened for better efficiency by integrating multi-systems (several communications technologies) into one test by leveraging functions such as Circuit Switched fallback (CSFB), Inter-RAT handover, etc. These functions support testing without needing to switch between tester RF connectors or power-down and up again repeatedly. UE TRX Calibration Time LTE FDD test Handover MT8821C system Changing by single step LTE TDD test CSFB W-CDMA test Inter-RAT handover GSM test Test Example Built-in Combiner With its built-in combiner, the MT8821C eliminates the need to configure a complex test system using external parts, as well as troublesome calibration. Existing Model MT8821C MT8820C #1 (PCC, SCC1) Combiner MT8820C #2 (SCC2) 8 RX2_p/s1/s2 Combiner (TX/RX1)_p/s1/s2 LTE-Advanced CA UE LTE-Advanced DL CA 3CC (SISO) Connection MT8821C (PCC, SCC1/2) RX2_p/s1/s2 (TX/RX1)_p/s1/s2 LTE-Advanced CA UE Radio Communication Analyzer MT8821C Features Functional Testing Over The Air (OTA) Testing The UE TRX performance is affected by factors such as the antenna form and characteristics. The OTA test measures the total UE TRX performance using actual radio waves reaching the antennas. The MT8821C supports the various OTA vendor test system configurations in compliance with the 3GPP TS 34.114 and CTIA Total Radiated Power (TRP), and Total Radiated Sensitivity (TRS) test standards. Control PC MT8821C Control PC Downlink signal Anechoic Chamber Uplink signal Although one MT8821C unit can output up to 8 independent signals, DL 4CA 4�4 MIMO measurements require output of 16 signals. Using two linked MT8821C units supports unrestricted frequency allocation and bandwidth settings for all four CCs, enabling DL 4CA 4�4 MIMO measurements. Control PC MT8821C (Slave) SCC2 SCC3 Combiner Combiner RX4 (p/s) RX3 (p/s) MT8821C (Master) PCC SCC1 Combiner Combiner RX2 (p/s) RX1 (p/s) Downlink signal Uplink signal Chamber/Shield Box SAR (Specific Absorption Rate) Test The SAR test evaluates the amount of energy in the electromagnetic waves radiated from a UE that is absorbed by a jig called a `phantom' mimicking the human body. This test is designed to protect the health of UE users from the effects of electromagnetic waves. The basic amount of absorbed energy is determined by the standard for each country and region. The MT8821C supports the SAR test for each type of communication system. SAR Measuring Instrument MT8821C Downlink signal Reverberation Chamber Uplink signal Moreover, it also supports the increasing number of test conditions demanded by higher antenna counts in UE units supporting LTEAdvanced CA and MIMO standards. Last, the shorter test time resulting from stable call processing performance is a key advantage of the MT8821C in various OTA test systems. Support Systems TRP LTE FDD LTE TDD Cat-M NB-IoT W-CDMA GSM GPRS/EGPRS TD-SCDMA TRS Comment SISO, 2�2 MIMO, 4�4 MIMO, DL CA 2CC/3CC/4CC/5CC/6CC/7CC/8CC, UL CA 2CC SISO, 2�2 MIMO, 4�4 MIMO, DL CA 2CC/3CC/4CC/5CC/6CC/7CC/8CC, UL CA 2CC Cat-NB1, 2 HSPA, HSPA Evolution, DC-HSDPA HSPA Probe Phantom UE MT8821C SAR Test Setup 5G NSA (Non-Standalone) Testing At the initial stage of 5G, NSA is considered as the main service form by many network operators who consider to realize 5G first network by adding 5G cell function to the existing LTE network. MT8821C can be the Anchor at 5G NSA call processing test by combining with Radio Communication Test Station MT8000A. eLTE 5G NR 5G NSA UE MT8821C MT8000A NSA-NR Network Configuration Example 9 Radio Communication Analyzer MT8821C Features Functional Testing (continued) Power Consumption Testing Battery power consumption is a key point in differentiating chipsets and smartphones. As well as supporting the GSMA-defined power consumption tests, the MT8821C also supports power consumption tests at the maximum IP data throughput. Control PC MT8821C GPIB UE DC supply (with multi-meter) Power Consumption Test Category Procedure Standby Time Test MOMR: Talk Time Test Power Consumption MTNR: Talk Time Test Video Telephony Test Packet Switch Transfer Test (Download) Packet Switch Transfer Test (Upload) Packet Switch Transfer Test (Download/Upload) Support Systems GSM W-CDMA LTE GSM W-CDMA GSM W-CDMA W-CDMA LTE LTE LTE Packet Rate (bps) DL 5.16M, UL 5.54M @ 10 MHz DL 5.16M, UL 5.54M @ 10 MHz DL 21.4M, UL 22.9M @ 10 MHz Inter-RAT Measurement, DSDA RF Testing The all-in-one MT8821C can test two communications technologies simultaneously. As well as testing two UE units at the same time, it can also perform RF tests of a Dual SIM Dual Active (DSDA) dual-mode UE with two separate communications technologies for standby and communications. It also supports Inter-RAT tests reporting the TX powers of base stations using different communications technologies to the UE. MT8821C GSM/GPRS/EGPRS W-CDMA/HSPA VoLTE Voice/Video Echoback Testing As VoLTE offering high-quality and low-latency voice calls becomes the de facto communications technology for recent UE, there is increasing demand for power consumption measurements during VoLTE calls as well as for confirmation of VoLTE call operations. However, setting the VoLTE IMS server is difficult. With its built-in IMS server, the MT8821C reduces test preparation time and supports efficient VoLTE voice/video echoback tests, because the LTE measurement software GUI operations are also reflected at the IMS server. MT8821C UE VoLTE voice/video Echoback Voice End-to-End Communication Testing As well as evaluating UE RF performance, the MT8821C also supports functional tests, such as IP data throughput, audio/video tests, etc. Video calls between two UE units can be tested using one MT8821C with installed Parallel Phone measurement option. Furthermore, with its built-in application server function, smartphone and tablet IP data throughput tests require only the MT8821C and UE. All-in-one DL CA 4CC 2�2 MIMO Application server MT8821C Backwards Compatibility Remote Command Since the MT8821C remote commands maintain good backwards compatibility with legacy MT8820 series, previously used remote tools are supported, helping reduce costs when configuring automated test environments. Same PC tool can work GPIB or Ethernet GPIB or Ethernet RF2 GSM/GPRS/EGPRS RF1 W-CDMA/HSPA 10 MT8820C MT8821C MT8820C to MT8821C Upgrade Anritsu offers an upgrade path from the MT8820C to the MT8821C making full use of the existing MT8820C hardware and software to maximize previous investment in the MT8820C and keep MT8821C costs down. Radio Communication Analyzer MT8821C Configurations System Configurations/Options/Software Support Systems Main Frame Unit Options Soft ware Basic Configurations Hard ware Options LTE FDD TDD MT8821C-025 2nd RF for Phone1 MT8821C-026 3rd RF for Phone1 MT8821C-027 4th RF for Phone1 MT8821C-028 2nd RF for Phone2 MT8821C-029 3rd RF for Phone2 MT8821C-030 4th RF for Phone2 MX882112C LTE FDD Measurement Software MX882113C LTE TDD Measurement Software MT8821C-008 LTE Measurement Hardware MX882164C LTE VoLTE Echoback MX882112C-010 MX882113C-010 LTE FDD Anchor LTE TDD Anchor for 5G NSA for 5G NSA MX882112C-021 LTE-Advanced FDD DL CA Measurement Software MX882112C-022 LTE-Advanced FDD UL CA Measurement Software MX882112C-031 LTE-Advanced FDD DL CA 3CCs Measurement Software MX882112C-041 LTE-Advanced FDD DL CA 4CCs Measurement Software MX882112C-051 LTE-Advanced FDD DL CA 5CCs Measurement Software MX882112C-061 LTE-Advanced FDD DL CA 6CCs Measurement Software MX882112C-071 LTE-Advanced FDD DL CA 7CCs Measurement Software MX882112C-081 LTE-Advanced FDD DL CA 8CCs Measurement Software MX882112C-011 LTE FDD 2�2 MIMO DL MX882112C-012 LTE FDD 4�4 MIMO DL MX882112C-006 LTE FDD IP Data Transfer MX882112C-026 LTE-Advanced FDD DL CA IP Data Transfer MX882112C-036 LTE-Advanced FDD DL CA 3CCs IP Data Transfer MX882112C-046 LTE-Advanced FDD DL CA 4CCs IP Data Transfer MX882113C-021 LTE-Advanced TDD DL CA Measurement Software MX882113C-022 LTE-Advanced TDD UL CA Measurement Software MX882113C-031 LTE-Advanced TDD DL CA 3CCs Measurement Software MX882113C-041 LTE-Advanced TDD DL CA 4CCs Measurement Software MX882113C-051 LTE-Advanced TDD DL CA 5CCs Measurement Software MX882113C-061 LTE-Advanced TDD DL CA 6CCs Measurement Software MX882113C-071 LTE-Advanced TDD DL CA 7CCs Measurement Software MX882113C-081 LTE-Advanced TDD DL CA 8CCs Measurement Software MX882113C-011 LTE TDD 2�2 MIMO DL MX882113C-012 LTE TDD 4�4 MIMO DL MX882113C-006 LTE TDD IP Data Transfer MX882113C-026 LTE-Advanced TDD DL CA IP Data Transfer MX882113C-036 LTE-Advanced TDD DL CA 3CCs IP Data Transfer MX882113C-046 LTE-Advanced TDD DL CA 4CCs IP Data Transfer Cat-M IoT NB-IoT W-CDMA GSM MT8821C Radio Communication Analyzer MT8821C-012 Parallel Phone Measurement Hardware TD-SCDMA HSPA -- MX882116C MX882117C LTE Category M1 NB-IoT Measurement Measurement Software Software MX882100C W-CDMA Measurement Software MT8821C-001 W-CDMA Measurement Hardware MX882101C GSM Measurement Software MT8821C-002 TDMA Measurement Hardware MX882107C TD-SCDMA Measurement Software MT8821C-001 W-CDMA Measurement Hardware MT8821C-007 TD-SCDMA Measurement Hardware MX882115C W-CDMA HSPA Evolution IP Data Transfer MT8821C-008 LTE Measurement Hardware -- MX882116C-006 LTE Category M1 IP Data Transfer MX882117C-001 NB-IoT Category NB-2 Measurement Software MX882100C-019 W-CDMA HSPA Measurement Software MX882101C-011 EGPRS Measurement Software MX882107C-011 TD-SCDMA HSDPA Measurement Software MX882115C-001 DC-HSDPA IP Data Transfer MX882117C-002 NB-IoT Multi Carrier MX882100C-032 DC-HSDPA Measurement Software MX882107C-012 HSDPA Evolution Measurement Software MX882117C-006 NB-IoT IP Data Transfer MX882100C-033 DC-HSUPA Measurement Software MX882107C-021 TD-SCDMA HSUPA Measurement Software MX882100C-034 4C-HSDPA Measurement Software -- -- -- -- -- -- SEQ MX882120C Sequence Measurement Software -- MX882120C-001 W-CDMA Measurement Software MX882120C-002 GSM Measurement Software MX882120C-004 LTE Measurement Software MX882120C-005 TD-SCDMA Measurement Software -- 11 Radio Communication Analyzer MT8821C Panel Layout Front Panel 6 7 1 2 8 3 9 10 4 11 5 1 Local Key Switches from remote control operation mode to local control mode. 2 Power Switch Turns on the power and illuminates green when MT8821C is operating (power on state). 3 Handset 1/2 Connector For connection to a handset used for voice call testing of Phone 1/2. 4 USB Connector Four USB 2.0 interface ports for connection to USB memory, mouse and keyboard. 5 Ground Terminal Functional ground terminal (electrostatic discharge). 6 Display Displays MT8821C's operation screen, in which you can set measurement parameters and view measurement results, by touch operation. 7 Rotary Control Rotate: Moves the cursor and selects parameters. Press: Allows the selected parameter to be edited and saves the new parameter setting. 8 Phone 1/2* Aux Output Connector RF output connectors for RF measurement of Phone 1/2. 9 External SG Input Connector Input connector for RF measurement signals for Phone 1 from an external signal generator. The input signal is output from the Main connectors 1 and 2 by combining with output signals of Phone 1. 10 External SA Output Connector Output connector for monitoring RF measurement signals for Phone 1 at the external measuring device. 11 Phone 1/2 Main Connector Input/output connectors for RF measurement signals for Phone 1/2. 12 Radio Communication Analyzer MT8821C Panel Layout Rear Panel 30 29 28 27 26 25 24 23 12 22 21 20 19 13 14 15 16 17 18 12 AC Inlet AC power inlet for the power cable. With automatic voltage switching: 100 V(ac) to 120 V(ac)/ 200 V(ac) to 240 V(ac). 13 USB Connector Two USB 3.0 interface ports for connection to USB memory, mouse, and keyboard. 14 Remote 1/2* For remote control of Phone 1/2 of MT8821C, via 10/100/1000BASE-T. 15 Application Server Port 1/2* Interface for IP data transfer test. 16 SSD Slot Slot for a 2.5-inch SSD. 17 Aux Connector ARB input/output interface for Phone 1/2. 18 VGA Connector Output interface for an external monitor. 19 Reference Signal Output Connector Output connector for outputting reference signals from MT8821C. 20 Reference Signal Input Connector Input connector for inputting external reference signals. 21 Audio Input/Output Connector 1/2* Input/output connectors for AF measurement of Phone 1/2 (valid when the Voice Codec and Audio Board options are installed). 22 GPIB Connector 1/2* For remote control of Phone 1/2 of MT8821C, via GPIB. 23 Frame Trigger Output Connector 1/2* Output connectors for outputting frame-timing signals to an external device for Phone 1/2. 24 Event Trigger Output Connector 1/2* Output connectors for outputting event-timing signals to an external device for Phone 1/2. 25 Event Trigger Input Connector 1/2* Input connectors for inputting trigger signals from an external device to perform TX measurement of Phone 1/2, in synchronization with the external device. 26 1000BASE-T Port 1/2* Interface for communication test of Phone 1/2. (for LTE) 27 10BASE-T Port 1/2* Interface for communication test of Phone 1/2. (for W-CDMA, GSM) 28 MEAS Port 1/2 Not available. 29 Call Processing I/O Port 1/2* Interface for call processing test of Phone 1/2. 30 RS-232C Port 1/2* Interface for communication test of Phone 1/2. *: Enabled when Parallel Phone Measurement option installed in MT8821C. 13 Radio Communication Analyzer MT8821C Specifications Receiver Transmitter Reference Oscillator Display Frequency range: 3 0 MHz to 3.8 GHz 30 MHz to 6.0 GHz (with MT8821C-019) Maximum input level: +35 dBm (Main 1, 2) +10 dBm (SG Input) Frequency Output frequency range: 3 0 MHz to 3.8 GHz 30 MHz to 6.0 GHz (with MT8821C-019) Setting resolution: 1 Hz Accuracy: Depends on reference oscillator accuracy Output level Level range Main 1, 2: � 140 to �10 dBm (Internal signal generator TX 1 output) �140 to �16 dBm (Internal signal generator TX 2, 3, or 4 output) (with MT8821C-025, 026, 027 or with MT8821C-012, 028, 029, 030) Aux 1, 2, 3, 4: � 125 to +5 dBm (Aux 2, 3, 4: With MT8821C-025, 026, 027 or with MT8821C-012, 028, 029, 030) Resolution: 0.1 dB Level accuracy 10�C to 40�C, After Cal Main 1, 2 Level: �120 dBm, SG Input: Off When outputting from either of Main 1 or 2. Except effect of noise floor from the other internal signal generators. �1.5 dB (Frequency < 350 MHz, Internal signal generator TX 1 output) �1.0 dB, �0.7 dB (typ.) (350 MHz Frequency 3.8 GHz) �1.3 dB, �1.0 dB (typ.) (3.8 GHz < Frequency 6.0 GHz) Aux 1, 2, 3, 4 Level: �110 dBm �1.5 dB (Frequency < 350 MHz) �1.0 dB, �0.7 dB (typ.) (350 MHz Frequency 3.8 GHz) �1.3 dB, �1.0 dB (typ.) (3.8 GHz < Frequency 6.0 GHz) Signal purity Non-harmonic spurious: �30 dBc (offset frequency: 100 kHz) Harmonics: �25 dBc Reference oscillator Frequency: 10 MHz Start-up characteristics: 5 � 10�8 (10 min. after power-on referenced to frequency 24-hour after power-on) Aging rate: 2 � 10�8/day, 1 � 10�7/year (referenced to frequency 24-hour after power-on) Temperature characteristics: 5 � 10�8 Frequency accuracy before shipment: �2.2 � 10�8 (20�C to 30�C, 1 hour after power-on) Output connector: BNC-J, Level: TTL External reference input Frequency: 10 MHz or 13 MHz Operating range: �1 ppm 12.1-inch WXGA, 1280 � 800 pixels, color TFT LCD Touch panel: Projected capacitive type, multi-touch gestures 14 Radio Communication Analyzer MT8821C Specifications Front-panel Connectors RF input/output Main 1, 2 Connector: N-J, 50 (nom.) VSWR: 1.35 (30 MHz Frequency < 350 MHz) 1.30 (350 MHz Frequency < 450 MHz) 1.20 (450 MHz Frequency 1.6 GHz) 1.30 (1.6 GHz < Frequency 3.8 GHz) (Main 1) 1.30 (1.6 GHz < Frequency 2.7 GHz) (Main 2) 1.35 (2.7 GHz < Frequency < 2.9 GHz) (Main 2) 1.30 (2.9 GHz Frequency 3.8 GHz) (Main 2) 1.40 (3.8 GHz < Frequency 6.0 GHz) Aux 1, 2, 3, 4 Connector: SMA-J, 50 (nom.) VSWR: SG output level: �10 dBm 1.40 (30 MHz Frequency < 300 MHz) 1.30 (300 MHz Frequency 3.8 GHz) 1.60 (3.8 GHz < Frequency 6.0 GHz) SG Input Connector: SMA-J, 50 (nom.) VSWR: 1.40 (300 MHz Frequency 3.8 GHz) 1.60 (3.8 GHz < Frequency 6.0 GHz) Monitor Connector: SMA-J, 50 (nom.) VSWR: 1.30 (300 MHz Frequency 3.8 GHz) 1.60 (3.8 GHz < Frequency 6.0 GHz) Other Handset 1, 2: For dedicated handset Connector: RJ-12 USB Connector: USB 2.0, 4 ports 15 Radio Communication Analyzer MT8821C Specifications Rear-panel Connectors Storage Device Power Supply Dimensions and Mass Environmental Conditions EMC CE LVD RoHS Reference signal 10 MHz Buf Out: For internal reference oscillator output Connector: BNC-J Frequency: 10 MHz Level: TTL 10 MHz/13 MHz Ref In: For external reference signal input Connector: BNC-J, 50 (nom.) Level: 0 dBm Control GPIB 1, 2: For remote control Interface function: SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, C0, E2 Connector: GPIB (IEEE 488) Remote 1, 2 (Ethernet): For remote control Connector: RJ-45 (10/100/1000BASE-T) Data input/output Application Server 1, 2: For data transfer tests Connector: RJ-45 (1000BASE-T) RS-232C 1, 2: For data transfer tests Connector: D-sub 9-pin (RS-232) Call Proc I/O 1, 2: For call processing timing signal input/output Connector: Mini D-sub 15-pin Signal level: TTL, LVCMOS 10BASE-T 1, 2: For data transfer tests Connector: RJ-45 (10BASE-T) 1000BASE-T 1, 2: For data transfer tests Connector: RJ-45 (1000BASE-T) Aux: For ARB input/output Connector: Mini D-sub 15-pin Signal level: LVCMOS Trigger Frame Trig Output 1, 2: For frame trigger output Event Trig Input 1, 2: For event trigger input Event Trig Output 1, 2: For event trigger output Connector: BNC-J Signal level: TTL Audio AF Output 1, 2: For AF output Connector: BNC-J AF Input 1, 2: For AF input Connector: BNC-J Maximum input level: 30 V (RMS) Other USB: For general-purpose I/F Connector: USB 3.0, 2 ports VGA: For external display Connector: Mini D-sub 15-pin Signal level: Analog RGB MEAS 1, 2: Not used Connector: RJ-45 2.5-inch SSD 100 V (ac) to 120 V (ac)/200 V (ac) to 240 V (ac) (250 V max.), 50 Hz/60 Hz 1200 VA (with all options) 426 (W) � 221.5 (H) � 578 (D) mm (excluding projections) 40 kg (with all options) Temperature and Humidity Operating: +5�C to +40�C, 90% RH (no condensation) Storage: �20�C to +60�C, 85% RH (no condensation) 2014/30/EU, EN61326-1, EN61000-3-2 2014/35/EU, EN61010-1 2011/65/EU, EN50581 Typical (typ.): Performance not warranted. Most products meet typical performance. Nominal (nom.): Values not warranted. Included to facilitate application of product. 16 Radio Communication Analyzer MT8821C Ordering Information Please specify the model/order number, name and quantity when ordering. The names listed in the chart below are Order Names. The actual name of the item may differ from the Order Name. Model/Order No. MT8821C P0031A W3753AE MT8821C-001 MT8821C-002 MT8821C-007 MT8821C-008 MT8821C-012 MT8821C-019 MT8821C-025 MT8821C-026 MT8821C-027 MT8821C-028 MT8821C-029 MT8821C-030 MT8821C- 01 MT8821C- 02 MT8821C- 07 MT8821C- 08 MT8821C- 12 MX882100C MX882100C-002 MX882100C-003 MX882100C-005 MX882100C-019 MX882100C-032 MX882100C-033 MX882100C-034 MX882170C MX882101C MX882101C-002 MX882101C-005 MX882101C-011 MX882107C MX882107C-002 MX882107C-003 MX882107C-011 MX882107C-012 MX882107C-021 MX882112C MX882112C-006 MX882112C-010 MX882112C-011 MX882112C-012 MX882112C-016 MX882112C-021 Name Main Frame Radio Communication Analyzer Standard Accessories Power Cord: 1 pc USB Memory: 1 pc MT8821C Operation Manual: 1 pc Options W-CDMA Measurement Hardware TDMA Measurement Hardware TD-SCDMA Measurement Hardware LTE Measurement Hardware Parallel Phone Measurement Hardware*1 Extended RF 3.8 GHz to 6 GHz 2nd RF for Phone1 3rd RF for Phone1 4th RF for Phone1 2nd RF for Phone2 3rd RF for Phone2 4th RF for Phone2 Retrofit Options*2 W-CDMA Measurement Hardware Retrofit TDMA Measurement Hardware Retrofit TD-SCDMA Measurement Hardware Retrofit LTE Measurement Hardware Retrofit Parallel Phone Measurement Hardware Retrofit*1 Software Options W-CDMA Measurement Software W-CDMA External Packet Data W-CDMA Video Phone Test*3 W-CDMA A-GPS W-CDMA HSPA Measurement Software*3 DC-HSDPA Measurement Software DC-HSUPA Measurement Software 4C-HSDPA Measurement Software W-CDMA Ciphering Software*3 GSM Measurement Software GSM External Packet Data GSM A-GPS EGPRS Measurement Software TD-SCDMA Measurement Software TD-SCDMA External Packet Data TD-SCDMA Video Phone Test TD-SCDMA HSDPA Measurement Software TD-SCDMA HSDPA Evolution Measurement Software TD-SCDMA HSUPA Measurement Software LTE FDD Measurement Software LTE FDD IP Data Transfer LTE FDD Anchor For 5G NSA LTE FDD 2�2 MIMO DL LTE FDD 4�4 MIMO DL LTE FDD CS Fallback to W-CDMA/GSM LTE-Advanced FDD DL CA Measurement Software MX882112C-022 MX882112C-026 MX882112C-031 LTE-Advanced FDD UL CA Measurement Software LTE-Advanced FDD DL CA IP Data Transfer LTE-Advanced FDD DL CA 3CCs Measurement Software MX882112C-036 MX882112C-041 LTE-Advanced FDD DL CA 3CCs IP Data Transfer LTE-Advanced FDD DL CA 4CCs Measurement Software MX882112C-046 MX882112C-051 MX882112C-061 MX882112C-071 MX882112C-081 LTE-Advanced FDD DL CA 4CCs IP Data Transfer LTE-Advanced FDD DL CA 5CCs Measurement Software LTE-Advanced FDD DL CA 6CCs Measurement Software LTE-Advanced FDD DL CA 7CCs Measurement Software LTE-Advanced FDD DL CA 8CCs Measurement Software Remarks USB memory Requires MT8821C-001 Requires MT8821C-025 Requires MT8821C-026 Requires MT8821C-012 Requires MT8821C-028 Requires MT8821C-029 Requires MT8821C-001 Requires MT8821C-001 Requires MX882100C Requires MX882100C Requires MX882100C Requires MX882100C Requires MT8821C-001 (2 sets), MT8821C-012, MX882100C and MX882100C-019 Requires MX882100C-032 Requires MX882100C-032 Requires MX882100C Requires MT8821C-002 Requires MX882101C Requires MX882101C Requires MX882101C Requires MT8821C-007 Requires MX882107C Requires MX882107C Requires MX882107C Requires MX882107C-011 Requires MX882107C-011 Requires MT8821C-008 Requires MX882112C Requires MT8000A and MX882112C Requires MT8821C-012 and MX882112C Requires MT8821C-026, MT8821C-029 and MX882112C-011 Requires MX882112C and MX882100C or MX882101C Requires MT8821C-025 and MX882112C Requires MT8821C-028 when MX882112C-011 installed Requires MX882112C-021 Requires MX882112C-006 and MX882112C-021 Requires MT8821C-008 (2 sets), MT8821C-026 and MX882112C-021 Requires MT8821C-029 when MX882112C-011 installed Requires MX882112C-026 and MX882112C-031 Requires MT8821C-027 and MX882112C-031 Requires MT8821C-030 when MX882112C-011 installed Requires MX882112C-036 and MX882112C-041 Requires MT8821C-012 and MX882112C-041 Requires MX882112C-051 Requires MX882112C-061 Requires MX882112C-071 17 Radio Communication Analyzer MT8821C Ordering Information Model/Order No. MX882113C MX882113C-006 MX882113C-010 MX882113C-011 MX882113C-012 MX882113C-016 MX882113C-018 MX882113C-021 Name LTE TDD Measurement Software LTE TDD IP Data Transfer LTE TDD Anchor For 5G NSA LTE TDD 2�2 MIMO DL LTE TDD 4�4 MIMO DL LTE TDD CS Fallback to W-CDMA/GSM LTE TDD CS Fallback to TD-SCDMA/GSM LTE-Advanced TDD DL CA Measurement Software MX882113C-022 MX882113C-026 MX882113C-031 LTE-Advanced TDD UL CA Measurement Software LTE-Advanced TDD DL CA IP Data Transfer LTE-Advanced TDD DL CA 3CCs Measurement Software MX882113C-036 MX882113C-041 LTE-Advanced TDD DL CA 3CCs IP Data Transfer LTE-Advanced TDD DL CA 4CCs Measurement Software MX882113C-046 MX882113C-051 MX882113C-061 MX882113C-071 MX882113C-081 MX882115C MX882115C-001 MX882116C MX882116C-006 MX882117C MX882117C-001 MX882117C-002 MX882117C-006 MX882120C MX882120C-001 MX882120C-002 MX882120C-004 MX882120C-005 MX882132C MX882136C MX882142C MX882143C MX882164C MT8821C-UG 01 MT8821C-UG 02 MT8821C-UG 03 MT8821C-UG 04 MT8821C-UG011 MT8821C-UG 10 MT8821C-ES210 MT8821C-ES310 MT8821C-ES510 LTE-Advanced TDD DL CA 4CCs IP Data Transfer LTE-Advanced TDD DL CA 5CCs Measurement Software LTE-Advanced TDD DL CA 6CCs Measurement Software LTE-Advanced TDD DL CA 7CCs Measurement Software LTE-Advanced TDD DL CA 8CCs Measurement Software W-CDMA HSPA Evolution IP Data Transfer DC-HSDPA IP Data Transfer LTE Category M1 Measurement Software LTE Category M1 IP Data Transfer NB-IoT Measurement Software NB-IoT Category NB-2 Measurement Software NB-IoT Multi Carrier NB-IoT IP Data Transfer Sequence Measurement Software W-CDMA Measurement Software GSM Measurement Software LTE Measurement Software TD-SCDMA Measurement Software CDMA2000 Measurement Software Lite 1xEV-DO Measurement Software Lite LTE FDD Measurement Software Lite LTE TDD Measurement Software Lite LTE VoLTE Echoback Upgrade Kits*2 SPM Upgrade Kit from MT8820C PPM Upgrade Kit from MT8820C SPM Upgrade Kit from MT8820C with MX88207xC PPM Upgrade Kit from MT8820C with MX88207xC Software Upgrade Kit CPU/Windows10 Upgrade Retrofit Warranty Service 2 years Extended Warranty Service 3 years Extended Warranty Service 5 years Extended Warranty Service Remarks Requires MT8821C-008 Requires MX882113C Requires MT8000A and MX882113C Requires MT8821C-012 and MX882113C Requires MT8821C-026, MT8821C-029 and MX882113C-011 Requires MX882113C and MX882100C or MX882101C Requires MX882113C and MX882101C or MX882107C Requires MT8821C-025 and MX882113C Requires MT8821C-028 when MX882113C-011 installed Requires MX882113C-021 Requires MX882113C-006 and MX882113C-021 Requires MT8821C-008 (2 sets), MT8821C-026 and MX882113C-021 Requires MT8821C-029 when MX882113C-011 installed Requires MX882113C-026 and MX882113C-031 Requires MT8821C-027 and MX882113C-031 Requires MT8821C-030 when MX882113C-011 installed Requires MX882113C-036 and MX882113C-041 Requires MT8821C-012 and MX882113C-041 Requires MX882113C-051 Requires MX882113C-061 Requires MX882113C-071 Requires MT8821C-008 Requires MX882115C Requires MT8821C-008 Requires MX882116C Requires MT8821C-008 Requires MX882117C Requires MX882117C Requires MX882117C Requires MX882120C Requires MX882120C Requires MX882120C Requires MX882120C Requires MX882112C for LTE FDD, requires MX882113C for LTE TDD Required for additional purchase of software options, etc. 18 Radio Communication Analyzer MT8821C Ordering Information Model/Order No. Name Remarks P0035B P0035B7 P0135A6 P0135A7 P0135B6 P0135B7 P0250A6 P0250A7 P0250B6 P0250B7 P0260A6 P0260A7 P0260B6 P0260B7 P0435A6 P0435A7 A0058A P0031A Z0541A Z0975A Z1898A J1643A J1644A J0004 J1195A J1249 J1267 J1606A J0576B J0576D J0127A J0127C J0007 J0008 J1261A J1261B MN8110B B0332 B0703A B0701A B0702A Z1858A Z1859A J0322A J0322B J0322C J0322D J1398A J1802A Application Parts W-CDMA/GSM Test USIM W-CDMA/GSM Test USIM*4 Anritsu Test UICC GA*4, *5 Anritsu Test UICC GA*4, *5 Anritsu Test UICC GA*4, *5 Anritsu Test UICC GA*4, *5 Anritsu Test UICC GT*4, *5 Anritsu Test UICC GT*4, *5 Anritsu Test UICC GT*4, *5 Anritsu Test UICC GT*4, *5 Anritsu Test UICC GM*4, *5 Anritsu Test UICC GM*4, *5 Anritsu Test UICC GM*4, *5 Anritsu Test UICC GM*4, *5 Anritsu Test UICC GA for eDRX*4 Anritsu Test UICC GA for eDRX*4 Handset USB Memory USB Mouse Keyboard Connector Cap U Link U Link Coaxial Adaptor PP2S Output Cable CDMA2000 Cable CDMA2000 Cross Cable Cable Coaxial Cord, 1 m Coaxial Cord, 2 m Coaxial Cord, 1 m Coaxial Cord, 0.5 m GPIB Cable, 1 m GPIB Cable, 2 m Ethernet Cable (Shield Type) Ethernet Cable (Shield Type) I/O Adapter Joint Plate Rack Mount Kit (MT8821C) Carrying Case Carrying Case Divider Divider Coaxial Cord, 0.5 m Coaxial Cord, 1.0 m Coaxial Cord, 1.5 m Coaxial Cord, 2.0 m N-SMA ADAPTOR Sync Cable Micro UICC size Nano UICC size Micro UICC size Nano UICC size Micro UICC size Nano UICC size Micro UICC size Nano UICC size Micro UICC size Nano UICC size Micro UICC size Nano UICC size Micro UICC size Nano UICC size (for eDRX test) Micro UICC size (for eDRX test) USB connection N-P � UT-141 � SMA-P (for connecting Phone 2 Main1 - SG input) N-P � UT-141 � SMA-P (for connecting Phone 2 Main1 - Monitor) D-sub (15-pin, P-type) � D-sub (15-pin, P-type), used in combination with J1267 (sold separately) D-sub (9-pin, P-type) � D-sub (9-pin, P-type), reverse cable used in combination with J1249 (sold separately) D-sub (15-pin, P-type) � D-sub (15-pin, P-type) � D-sub (15-pin, P-type) N-P � 5D-2W � N-P N-P � 5D-2W � N-P BNC-P � RG58A/U � BNC-P BNC-P � RG58A/U � BNC-P 1 m, straight 3 m, straight For call processing I/O 4 pcs/set Hard type (with protective cover and casters) Hard type (with protective cover, without casters) 2-way divider 3-way divider SMA-P � SMA-P, DC to 18 GHz, 50 SMA-P � SMA-P, DC to 18 GHz, 50 SMA-P � SMA-P, DC to 18 GHz, 50 SMA-P � SMA-P, DC to 18 GHz, 50 *1: T he following measurement hardware support the Parallelphone measurement option: MT8821C-001, MT8821C-002, MT8821C-007 and MT8821C-008. All the measurement hardware can be installed simultaneously. *2: M T8821C- ## : Select from the following according to the option type. 1: Retrofit option (Must be returned to factory in Japan) 2: Retrofit option (Must be returned to service center outside of Japan) *3: F or UE connectivity, contact your Anritsu sales representative. *4: A commercial SIM adapter CANNOT be used. If used, it may jam and break in the UE. *5: R efer to the P0135Ax/P0250Ax/P0260Ax/P0135Bx/P0250Bx/P0260Bx leaflet for details. ParallelphoneTM is a trademark of Anritsu Corporation. 19 Specifications are subject to change without notice. � United States Anritsu Americas Sales Company 450 Century Parkway, Suite 190, Allen, TX 75013 U.S.A. Phone: +1-800-Anritsu (1-800-267-4878) � Canada Anritsu Electronics Ltd. 700 Silver Seven Road, Suite 120, Kanata, Ontario K2V 1C3, Canada Phone: +1-613-591-2003 Fax: +1-613-591-1006 � Brazil Anritsu Eletronica Ltda. Pra�a Amadeu Amaral, 27 - 1 Andar 01327-010 - Bela Vista - Sao Paulo - SP, Brazil Phone: +55-11-3283-2511 Fax: +55-11-3288-6940 � Mexico Anritsu Company, S.A. de C.V. Blvd Miguel de Cervantes Saavedra #169 Piso 1, Col. Granada Mexico, Ciudad de Mexico, 11520, MEXICO Phone: +52-55-4169-7104 � United Kingdom Anritsu EMEA Ltd. 200 Capability Green, Luton, Bedfordshire, LU1 3LU, U.K. Phone: +44-1582-433200 Fax: +44-1582-731303 � France Anritsu S.A. 12 avenue du Qu�bec, B�timent Iris 1- Silic 612, 91140 VILLEBON SUR YVETTE, France Phone: +33-1-60-92-15-50 Fax: +33-1-64-46-10-65 � Germany Anritsu GmbH Nemetschek Haus, Konrad-Zuse-Platz 1, 81829 M�nchen, Germany Phone: +49-89-442308-0 Fax: +49-89-442308-55 � Italy Anritsu S.r.l. Via Elio Vittorini 129, 00144 Roma, Italy Phone: +39-6-509-9711 Fax: +39-6-502-2425 � Sweden Anritsu AB Isafjordsgatan 32C, 164 40 KISTA, Sweden Phone: +46-8-534-707-00 � Finland Anritsu AB Teknobulevardi 3-5, FI-01530 VANTAA, Finland Phone: +358-20-741-8100 Fax: +358-20-741-8111 � Denmark Anritsu A/S c/o Regus Winghouse, �restads Boulevard 73, 4th floor, 2300 Copenhagen S, Denmark Phone: +45-7211-2200 � Russia Anritsu EMEA Ltd. Representation Office in Russia Tverskaya str. 16/2, bld. 1, 7th floor. Moscow, 125009, Russia Phone: +7-495-363-1694 Fax: +7-495-935-8962 � Spain Anritsu EMEA Ltd. Representation Office in Spain Paseo de la Castellana, 141. Planta 5, Edificio Cuzco IV 28046, Madrid, Spain Phone: +34-91-572-6761 � United Arab Emirates Anritsu EMEA Ltd. Dubai Liaison Office 902, Aurora Tower, P O Box: 500311- Dubai Internet City Dubai, United Arab Emirates Phone: +971-4-3758479 Fax: +971-4-4249036 � India Anritsu India Private Limited 6th Floor, Indiqube ETA, No.38/4, Adjacent to EMC2, Doddanekundi, Outer Ring Road, Bengaluru � 560048, India Phone: +91-80-6728-1300 Fax: +91-80-6728-1301 � Singapore Anritsu Pte. Ltd. 11 Chang Charn Road, #04-01, Shriro House, Singapore 159640 Phone: +65-6282-2400 Fax: +65-6282-2533 � Vietnam Anritsu Company Limited Room No. 1635, 16th Floor, ICON 4 Tower, 243A De La Thanh Street, Lang Thuong Ward, Dong Da District, Hanoi, Vietnam Phone: +84-24-3760-6216 Fax: +84-24-6266-2608 � P.R. China (Shanghai) Anritsu (China) Co., Ltd. Room 2701-2705, Tower A, New Caohejing International Business Center No. 391 Gui Ping Road Shanghai, 200233, P.R. China Phone: +86-21-6237-0898 Fax: +86-21-6237-0899 � P.R. China (Hong Kong) Anritsu Company Ltd. Unit 1006-7, 10/F., Greenfield Tower, Concordia Plaza, No. 1 Science Museum Road, Tsim Sha Tsui East, Kowloon, Hong Kong, P.R. China Phone: +852-2301-4980 Fax: +852-2301-3545 � Japan Anritsu Corporation 8-5, Tamura-cho, Atsugi-shi, Kanagawa, 243-0016 Japan Phone: +81-46-296-6509 Fax: +81-46-225-8352 � Korea Anritsu Corporation, Ltd. 5FL, 235 Pangyoyeok-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, 13494 Korea Phone: +82-31-696-7750 Fax: +82-31-696-7751 � Australia Anritsu Pty. Ltd. Unit 20, 21-35 Ricketts Road, Mount Waverley, Victoria 3149, Australia Phone: +61-3-9558-8177 Fax: +61-3-9558-8255 � Taiwan Anritsu Company Inc. 7F, No. 316, Sec. 1, NeiHu Rd., Taipei 114, Taiwan Phone: +886-2-8751-1816 Fax: +886-2-8751-1817 2006 Printed in Japan 28/JUL/2020 ddcm/CDT Catalog No. MT8821C-E-A-1-(8.01)