System pro M compact InSite

manual interventions Energy efficiency Compliance with highest energy efficiency standards Easy access to data Monitor, consult and export every type of data by accessing the User Interface — System pro M compact InSite…
— System pro M compact InSite

manual interventions. Energy efficiency. Compliance with highest energy efficiency standards. Easy access to data. Monitor, consult and export every type of ...
2020-04-17 —
Full PDF Document

If the inline viewer fails, it will open the original document in compatibility mode automatically. You can also open the file directly.
Extracted Text

-- System pro M compact� InSite

Beyond connected, always one step ahead of maintenance.

� Flexible and scalable solutions for commercial and industrial areas
� Retrofit existing installations within a day � Connect the system to the cloud in only 10
minutes � Lower operational costs and improved
facility value by 5% � Save up to 20% of energy and reduce CO2
emissions by 15%

-- Designed for commercial and industrial buildings, System pro M compact� InSite can be installed as a standalone solution or integrated into any IT infrastructure, such as the cloud-based ABB AbilityTM Energy and Asset Manager solution, to help users achieve the highest standard of energy efficiency compliance, as well as saving up to 20% on energy bills.

-- Table of contents

004�005Connected solutions for sub distribution

006�007Main benefits for customers

008�009 Technical data

010�011

Ordering data

4

SYSTEM PRO M COMPACT� INSITE BEYOND CONNECTED

-- System pro M compact� InSite Connected solution for sub distribution

System pro M compact� InSite is a range of connected devices to support energy and asset management in electrical distribution.
The solution delivers highest data security standards (encrypted SNMP V3 and SSL certificate) as well as continuous upgrades thanks to regular firmware updates. Central to the System pro M� InSite range is the SCU100 control unit, that has been specifically developed to allow users to better manage energy and assets in sub distribution boards. It can gather data from up to 16 energy and power meters, as well current sensors for branch measurement.
ABB's ready-made, pre-assembled InSite kit packages are designed to make sub and final electrical distribution smarter with minimal effort. Any size of installation in commercial or industrial application can easily be upgraded,

reducing installation and configuration time to nearly zero, and in turn, minimize costly operational downtime.
To enable monitoring and control of the complete energy distribution system, the range is completed with a flexible choice of input and output modules, which can be easily connected to ABB's System pro M compact� accessories of MCBs and RCDs, as well as other DIN-Rail products with digital inputs or outputs. They can also be connected to pulse meters � such as gas or water � to collect utilities consumption.
Based on a wide set of data, available functionalities range from simple monitoring of the installation to analysis of historical data, customized alarms and implementation of automated actions to reduce energy consumption, identify potential risks and ensure operational continuity.

Cloud ABB AbilityTM

Web server

Modbus-TCP/IP Modbus-RTU
Energy meters and power meters

InSite-Bus

Control Unit SCU 100

Circuit monitoring using current sensors

Digital I/O modules

Accessories and other modular DIN rail devices such as signal & auxiliary contacts, contactors and relays

CONNECTED SOLUTION FOR SUB DISTRIBUTION

5

-- What to include in the panel:
1 Control Unit 2 Digital I/O modules 3 Current sensors 4 Flat cable

1 Control Unit SCU 100

Single access point in the sub distribution board, data
aggregator and collector from field devices

4th port for Modbus RTU to enable connection of meters

Firmware upgrade to communicate with: � Classic accessories connected through I/O modules � Sensors, energy and power meters in Modbus RTU � Current sensors

LEDs for visual understanding of correct /uncorrect
installation and functioning

Internal power supply to enable communication and correct functioning
of sensors and I/O modules

Modbus TCP/IP and RTU to communicate to supervision system, enabling remote availability of collected data

2 Digital Input/Output modules DM00, DM10, DM11

� Connect in the connectivity system classic accessories from existing and future ABB ranges and 3rd party ranges.
� Compatibility with water/gas/heat meters with pulse outputs
� Input to receive data fromhard wired connecte devices (accessories, meters)
� Output to act on connected accessories

Connection to InSite bus via same type of connectors as
existing sensors

Visual indication of correct installation and functioning

Assignment of ID address via dedicated button and analogous procedure as for sensors
No external power supply to enable communication and correct functioning
Screwless terminals to ease installation procedure

6

SYSTEM PRO M COMPACT� INSITE BEYOND CONNECTED

-- System pro M compact� InSite Main benefits for customers

Energy efficiency Compliance with highest energy efficiency standards

Save up to 20% on energy bill Energy bills can be reduced by removing inefficiencies and
wisely managing consumption of the facility

DESIGN AND

OPERATIONS

Alerts and warnings Be always informed and early detect potential
issues to limit negative consequences
Automatic control Promptly react to selected events with no need of
manual interventions
Easy access to data Monitor, consult and export every type of data
by accessing the User Interface

MAIN BENEFITS FOR CUSTOMERS

7

S P E C I F I C AT I O N

Updated and secured system FW update via webserver and data secured thanks to encrypted SNMP V3 and SSL certificate
Scalable, cloud-integrated solution Stand-alone system or integrated in ABB AbilityTM Energy and Asset Manager

Retrofit in 1 day existing installations Limited downtimes during new solution implementation

Easy to install No additional tools during coupling and connection of devices

INSTALLATION AND COMMISSI

ONING

Fast configuration System and single devices configured via dedicated pages in the webUI
Automatic recognition Error-free configuration thanks to automatic recognition of installed devices

8

SYSTEM PRO M COMPACT� INSITE BEYOND CONNECTED

-- Technical data System pro M compact� InSite

Sub distribution control unit

Technical feature Supply voltage
Frequency
Power input (L1-N)
Power input , current trtransformer, secondary side

Unit [VAC] [Hz] [W] [VA]

Description 80-277 (L1-N, +5%) 50/60 5...45 depending on number of sensors and I/O modules Current circuit <2 (per phase)

Voltage measurement range

[VAC]

Measurement range, current transformer, [A] secondary side

80-277 (L1, L2, L3-N)
nominal: 5 max: 6

Hramonic component Data rate of Modbus RTU Refresh time Data storage and export
Communication
Connected devices

[Hz] [Baud]

up to 2000 RS485 2- wire, 2400...115200 1sec / 30 sec (depending on type of data) Integrated 1-year data storage Automatic CSV data export

LAN: Modbus TCP/IP, SNMP v1, v2, encrypted v3 RS485: Modbus RTU

Up to 96 sensors/digital channels Up to 16 meters

LAN Conductor cross-section Mounting method Degree of protection Dimensions
Oparting temperature Stirage temperature Standards

[Mbit/s] 100 [mm2] 0.5...2.5
35mm DIN rail (DIN 5022) IP20 [mm] 161.5x87.0x64.9 (9WM)

[�C]

-25... +60

[�C]

-40... +85

IEC61010-1

Main circuit accuracy Voltage Current Harmonic component (up to 2500Hz) Active power Apparent power Reactive power Power factor

Description � 1% � 1% � 1% � 2% � 2% � 2% � 2%

TECHNICAL DATA

9

Input and Output modules

Technical feature

Unit

Number of digital channels Voltage (min - max)*

Input module DM11
4 Input
active input: 22-26 Vdc

Output module DM00
4 Output
relay output: 5Vdc-240Vac

Input and Output module DM10
2 Input + 2 Output
active input: 22-26Vdc

Current (min - max)*
Pulse minimum duration** Pulse frequency** Terminals cross section Mounting method Degree of protection Dimensions Operating temperature Storage temperature

relay output: 5Vdc-240Vac

active input: 4mA

relay output: 5mA-2.5A Max 4,5A (<5sec)

active input: 4mA
relay output: mA-2.5A Max 4,5A (<5sec)

[ms] 5

n/a

5

[Hz] 100

n/a

100

[mm2] 2,5

2,5

2,5

35 mm DIN rail (DIN 50022) or SMISSLINE TP plug base

IP20

IP20

IP20

[mm] 36x88x65

36x88x65

36x88x65

[�C] -25...+60

-25...+60

-25...+60

[�C] -40...+85

-40...+85

-40...+85

Standards

IEC 61010

*relay output values reported are applicable to resistive load **Applicable only to active inputs

IEC 61010

IEC 61010

10

SYSTEM PRO M COMPACT� INSITE BEYOND CONNECTED

-- Ordering data System pro M compact� InSite

SCU100 The SCU100 is capable of collecting measurements and information from up to 16 energy and power meters, in addition to 96 current sensors and digital channels, all simultaneously. It calculates the energy and number of operations at single line level and compares stored values by period or by device.
Remotely monitoring of the system is made possible by a digital communication that supports different protocols: Modbus RTU, TCP or SNMP v1 and v2 and the encrypted v3.
Its built-in web server offers intuitive access to the measured data, the configuration settings and the system parameters, providing one unique interface for both operations and commissioning process. The two interfaces � LAN (TCP/IP or Modbus TCP) and RS485 (Modbus RTU) � guarantee straightforward integration into any IT infrastructure. What's more, the data can be read out by means of an encrypted SNMP protocol.
The Sub-distribution Control Unit SCU100 has been specifically develop to meet requirements of energy and asset monitoring and control in sub-distribution panelboards. In a framework where energy efficiency and operations continuity are becoming crucial, SCU100 offers the possibility to reduce wastes and identify risky situations promptly.

Digital Input and Output modules � DM11, DM00, DM10 The range of digital Input and Output Modules consists of 3 devices to adapt to quantity and type of installed products: Input Module DM11, Output Module DM00 and Input/Output Module DM10.
They can be connected to System pro M compact� accessories of MCBs and RCDs, but also to other DIN-Rail products with a digital input or output and to pulse meters (e.g. water, gas meters). They can read contact status, activate or deactivate lines and collect utilities consumptions.
ABB ranges compatible with I/O Modules are:
Molded Case Circuit Breaker Tmax XT

Molded Case Circuit Breaker S 200 SN 201 S200 80-100A S 750 DR S 700 S 800

Residual Current Devices RCCBs � F 200 RCD-blocks � DDA 200, DDA 800 RCBOs � DS 201, DS 202, DS 203, DS 200, DS800 eRCBOs � DSE, DSN

ORDERING DATA

11

Accessories The Sub-distribution Control Unit needs a flat cable to gather information from current sensors and digital I/O modules. The flat cable should be a 4-pin cable, flexible in length. Devices can be placed at customizable distances required by the specific application.

Description

GTIN 7612271 EAN

Sub-distribution Control Unit

508104

Digital Input Module

508135

Digital Output Module

508142

Digital Input and Output Module 508159

Flat cable 5m

508111

Connector set (35pcs)

508128

Ordering details
Brief description SCU100 DM11 DM00 DM10 INS105 INS135

Product no. 2CCG000242R0001 2CCG000245R0001 2CCG000246R0001 2CCG000247R0001 2CCG000243R0001 2CCG000244R0001

Unit price

Weight of Packaging 1 unit (kg) unit (pce.)

0.329

1

0.075

1

0.085

1

0.080

1

0.046

1

0.024

35

-- ABB Ltd. ABB Electrification Smart Buildings Division abb.com/lowvoltage
� Copyright 2020 ABB. All rights reserved. Specifications subject to change without notice.

9AKK107680A4896 REV B 09.2020