Product Introduction
The BK467 measures speed or cadence in real time and sends this data to an app or bike computer. This user manual is provided to help you use the product effectively and should be kept for reference.
Standard Accessories
- Speed / Cadence Sensor x 1
- Rubber Mat (Flat x 1, Curved x 1)
- Band (Large x 2, Medium x 2, Small x 2)
- User Manual x 1
Remove the Insulation Sheet
Before first use, the insulation sheet must be removed from the battery compartment.
Step 1: Twist the battery cover with a coin in the OPEN direction. Open the battery cover and remove the battery.
Diagram: A coin is shown twisting the battery cover of the sensor. An arrow points to the battery compartment with an information icon (ℹ️) and the text "Please remove before use".
Step 2: Take out the insulating sheet.
Function and Operation
The BK467 supports both speed mode and cadence mode. You can switch between these modes by rebooting the device.
Mode Switching
a. To switch modes, twist the battery cover with a coin in the OPEN direction, open the battery cover, remove the battery, and then install it again. After reinserting the battery, twist the battery cover in the CLOSE direction to secure it.
Diagram: A coin is shown twisting the battery cover of the sensor.
b. After the battery is installed and the device is powered on, a light will indicate the current mode. A red light signifies speed mode, while a blue light indicates cadence mode.
Diagram: The sensor is shown with a light emitting from it.
Installation
Installation for Speed Mode
Buckle the curved rubber mat onto the back of the sensor. Then, bind the sensor with the large rubber band onto the wheel axle.
Diagram sequence: 1. Sensor with curved mat attached. 2. Sensor positioned on a bicycle wheel axle. 3. Rubber band being used to secure the sensor to the axle. 4. Final secured installation with "ok!" indicated.
Installation for Cadence Mode
Buckle the flat rubber mat onto the back of the sensor. Then, bind the sensor with the small rubber band onto the pedal crank.
Diagram sequence: 1. Sensor with flat mat attached. 2. Sensor positioned on a bicycle pedal crank. 3. Small rubber band being used to secure the sensor to the crank. 4. Final secured installation with "ok!" indicated.
Specifications
| Feature | Specification |
|---|---|
| Weight | 9.5 g |
| Battery Life | 300 hours |
| Battery Type | CR2032 220mAh |
| Waterproof | IP67 |
| Wireless | Bluetooth & ANT+ |
| Size | 41 x 34 x 10 mm |
| Max Speed | 120 km/h |
| Max Cadence | 300 rpm |
| Working Temperature | -10°C ~ 50°C |
| Color | Black |
Applicable Smart Phones
- iOS 7.0 or above, iPhone 4s model or above
- Android 4.3 or above with Bluetooth 4.0
Compatible Apps
CoospoRide, Wahoo, Openrider, Zwift, MAP MY RIDE+, or other Apps with speed/cadence feature.
Disclaimer
The information contained in this manual is for reference only. The product described may be subject to alteration due to the manufacturer's ongoing research and development plans, without prior announcement.
COOSPO makes no statement or warranty regarding this manual.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and.
- This device must accept any interference received, including interference that may cause undesired operation.
Safety and Disposal Information
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information. ♻️
⚠️ ⚡
- Do not open or modify the product.
- Do not disassemble or attempt to service this product.
- This product is safe under normal and reasonably foreseeable operating conditions.
- If the product is operating improperly, call COOSPO support.
- Product must be returned to the manufacturer for any service or repair.