Full PDF Document

If the inline viewer fails, it will open the original document in compatibility mode automatically. You can also open the file directly.
Extracted Text

CERTIFICATE OF COMPLIANCE

Certificate Number Report Reference Issue Date

E332693 E332693-20110309 2019-DECEMBER-12

Issued to:

ABB Automation Products GmbH
Eppelheimer Str. 82 69123 Heidelberg GERMANY

This certificate confirms that representative samples of

PROGRAMMABLE CONTROLLERS FOR USE IN HAZARDOUS LOCATIONS
See Addendum Page for Models

Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate.

Standard(s) for Safety: Additional Information:

ANSI/ISA-12.12.01 & CAN/CSA C22.2 No. 213-16, Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
See the UL Online Certifications Directory at https://iq.ulprospector.com for additional information.

This Certificate of Compliance does not provide authorization to apply the UL Mark. Only the UL Follow-Up Services Procedure provides authorization to apply the UL Mark.
Only those products bearing the UL Mark should be considered as being UL Certified and covered under UL's Follow-Up Services.
Look for the UL Certification Mark on the product.

Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 3

CERTIFICATE OF COMPLIANCE

Certificate Number Report Reference Issue Date

E332693 E332693-20110309 2019-DECEMBER-12

This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements.
Programmable Controllers and modules, open type, AC500 and S500 Series, all may be followed by � XC, for use in Class I, Division 2, Groups A, B, C and D Hazardous Locations.
Programmable Controllers: Models AC500 and S500 Series, all may be followed by �XC, basically consisting of Terminal Base: Models TB511-ARCNET, TB511-ETH, TB 711F, TB521-ARCNET, TB521-ETH, TB541-ARCNET, TB541-ETH.
Terminal Unit: Models: TU505, TU 705F, TU506, TU 706F, TU515, TU 715F, TU516 TU516-H, TU531, TU532 TU532-H, TU542, TU542-H, TU552-CS31, TU551-CS31, TU 716F, TU 731F, TU 732F, TU507-ETH, TU508-ETH, TU520-ETH, TU510,TU 710F, TU582-S, TU518, TU509, TU 709F, TU517.
Models: TB5600-2ETH, TB5610-2ETH, TB5620-2ETH, TB5640-2ETH and TB5660-2ETH
CPU Unit: Models PM571, PM572, PM573 could be followed by ETH or ARCNET, PM581, PM 783F, PM582 may be followed by �ARCNET or �ETH, EC581-ARCNET, PM590 may be followed by �ARCNET or �ETH, PM591 may be followed by �ARCNET or �ETH; PM592 may be followed by �ARCNET or �ETH, PM595-4ETH may be followed by �F or �M, PM583 and EC583 may be followed by �ETH or � ARCNET, BCU06-ETH, SM560-S, SM560-S-FD1, SM560-S-FD4.
Models PM5630-2ETH, PM5650-2ETH, PM5670-2ETH, and PM5675-2ETH
Communication Coupler Modules: Models CM572-DP, CM 772F, CM575-DN, CM574-RS, CM574-RCOM, CM577-ETH, CM579-PNIO, CM579-ETHCAT, CM578-CN, CM588-CN, CM579-PNIO, CM597-ETH, CM589-PNIO, CM589-PNIO-x, x maybe followed by additional digits, CM582-DP, CM592-DP, CM598-CN, CM550-DDCS.
Analog Input/Output Modules: Models AX522, AX 722F, AX521, AX 721F, AO523, AO 723F, AI523, AI531, AI 731F, AI 723F, AC522, AC 722F, AI581-S.
Digital Input/Output Modules: Models DX522, DX 722F, DX531, DX 731F, DC532, DA501, CI502-PNIO, CI522-MODTCP, CI542-DP, CI582-CN, CI512-ETHCAT, DC 732F, DC541-CM, DC523, DC 723F, DC522, DC 722F, DA 701F, CD522, CD 722F, DX581-S, DA502;

Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 2 of 3

CERTIFICATE OF COMPLIANCE

Certificate Number Report Reference Issue Date

E332693 E332693-20110309 2019-DECEMBER-12

Digital Input Modules: Models DI524, DI 724F.
Decentral I/O Modules: Models: DC505-FBP, DC 705F, DC551-CS31, DC551-08L1 or CI590-CS31.
Analog and Digital Input/Output Modules: Models CI592-CS31, CI501-PNIO, CI511-ETHCAT, CI521-MODTCP, CI541-DP, CI 741-F, CI581-CN.
Decentral Communication Modules: Models CI504-PNIO, CI506-PNIO.
Digital Output Module: Model DO524, DO526.
Digital Input Module: Model DI581-S.
Terminal Functions (Base Board) � Modules: Models TF501, TF521.
I/O Unit Module: Model: FM502-CMS.

Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 3 of 3