Dura Faucet Limited Lifetime Warranty
Dura Faucet products have been manufactured under the highest standards of quality and workmanship. Dura Faucet warrants to the original purchaser for as long as the original purchaser owns their RV that this product will be leak- and drip-free during normal use, and that all parts and finishes of this product will be free from defects in material and manufacturing workmanship. Plated metal and plated plastic finishes are warranted for (1) year.
If the product should develop a leak or drip during the warranty period, Dura Faucet will, free of charge, provide the parts necessary to put the product back into good working condition by you. Dura Faucet will also replace any part or finish that proves defective in material and manufacturing workmanship, under normal installation, use and service, free of charge. Proof of purchase (original sales receipt) from the original purchaser must accompany all warranty claims. Defects or damages caused by the use of other products or parts is not covered by this warranty. If repair or replacement is not practical, Dura Faucet may elect to refund the purchase price in exchange for the return of the product.
This warranty covers replacement of all defective parts and finishes. However, damage due to product abuse, product misuse, installation error, or the use of cleaners containing alcohol, abrasives, or other solvents, whether performed by a contractor, service company, or yourself, will void this warranty. Dura Faucet will not be responsible for labor charges and/or damages incurred in installation, repair or replacement, nor any indirect, incidental or consequential damages, losses, or injury costs of any nature relating to this product. Except as provided by law, this warranty is in lieu of and excludes all other warranties, conditions and guarantees, whether expressed or implied, statutory or otherwise, including without restriction those of merchantability or of fitness for use.
To begin a warranty claim, write to Dura Faucet explaining the defect and include proof of purchase and your name, address and telephone number. Email is warranty@durafaucet.com.
Important Note: Never use cleaners containing abrasive cleansers, ammonia, bleach, acids, waxes, alcohol, solvents or other products not recommended for plated metal or plastic finishes. This will void the warranty.
Dura Faucet Contact Information:
19215 SE 34th St. Ste. 106-382
Camas, WA 98607
DF-SA150 – Single Lever RV Shower Faucet
The DF-SA150 is a single lever RV shower faucet designed for durability and ease of use.
Installation of the Faucet
-
New Faucet Preparation
Turn the water to the RV off before installing. Remove the existing fixture.
-
Install Faucet to Water Supply Tubes
Place the flat side of the sealing gasket against the wall, and then insert the faucet inlet tubes through the gasket into the wall. Position the faucet on the wall. You may need to remove an access panel to access the faucet mounting nuts. Once inserted, tighten the mounting nuts from behind the wall. Then, connect the water supply lines from the RV to the inlet tubes of the faucet. Ensure hot water is on your left, and cold water is on your right. Hand tighten the nuts over the washer and then tighten 1/4 turn with a wrench. Overtightening the nut can cause leaking.
-
Attach Sprayer to Diverter and Flush Lines
Turn the water to the RV back on and check for leaks at the supply line connections. Attach the sprayer to the faucet top. Turn the hot and cold water on for 30 to 60 seconds to remove any potential debris from the lines. You can now enjoy your Dura Faucet.
Maintenance and Cleaning
The finish on your product is designed to retain its beautiful sheen for years. To maintain the original look of the finish, a little care and caution should be used. We recommend the use of mild soap and water to clean the product.
Caution: The use of abrasive cleaners may scratch the finish or cause other damage.
Recommended Tools and Materials
- Adjustable Wrench
- Plumbers Tape (Thread Seal Tape)
Before You Begin
There are a variety of things to do before installing any new plumbing system into your home or residence. Before you begin work make sure you:
- Shut off the main water supply
- Cover your drain to prevent loss of parts
- Observe any local plumbing codes
- Inspect fixture for damage - Replace as necessary
Dura Faucet reserves the right to make any revisions in the design of products without notice.
Parts List
Part List:
- 1. ABS Handle (1)
- 2. Stainless Screws (1)
- 3. POM Teething Ring (1)
- 4. ABS Cover (1)
- 5. Ceramic Disk Cartridge (1)
- 6. ABS Panel (1)
- 7. Rubber O-Ring (1)
- 8. ABS Shell (1)
- 9. Rubber Pellicle (1)
- 10. ABS Shell (1)
- 11. POM Three Direct Links (1)
- 12. Rubber O-Ring (4)
- 13. POM Connector (2)
- 14. POM Stopper (1)
- 15. PP Bottom (1)
- 16. Stainless Screws (2)