File info: application/pdf · 8 pages · 51.77KB
Section 1: Identification of the substance/mixture and of ...
SAFETY DATA SHEET KILROCK-K / BIG-K Page: 3 Section 5: Fire-fighting measures 5.1. Extinguishing media Extinguishing media: Suitable extinguishing media for the surrounding fire should be used. Use water spray to cool c…
Full PDF Document
If the inline viewer fails, it will open the original document in compatibility mode automatically. You can also open the file directly.
Extracted Text
SAFETY DATA SHEET KILROCK K (250mKlI)LR/ BOICGK-K-K(4/0B0ImGl-)K/ MEGA-K (1000ml) Page: 1 Compilation date: 17/12/2013 Revision No: 1 Section 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name: KILROCK-KK (/2B5I0Gm-Kl) / BIG-K (400ml) / MEGA-K (1000ml) 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of substance / mixture: Consumer use of washing and cleaning products. 1.3. Details of the supplier of the safety data sheet Company name: Kilrock Products Ltd Units 1b/2b Alma Road ind Est Chesham Buckinghamshire HP5 3HB United Kingdom Tel: +44 (0)1494 793900 Email: velda@kilrock.co.uk 1.4. Emergency telephone number Emergency tel: +44 (0)1494 793900 (office hours only) Section 2: Hazards identification 2.1. Classification of the substance or mixture Classification under CLP: Skin Corr. 1B: H314 Classification under CHIP: C: R34 Most important adverse effects: Causes severe skin burns and eye damage. 2.2. Label elements Label elements under CLP: Hazard statements: H314: Causes severe skin burns and eye damage. Signal words: Danger Hazard pictograms: GHS05: Corrosion Precautionary statements: P264: Wash hands thoroughly after handling. P280: Wear protective gloves/protective clothing/eye protection/face protection. P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove [cont...] SAFETY DATA SHEET KILROCK K (250mKlI)LR/ BOICGK-K-K(4/0B0ImGl-)K/ MEGA-K (1000ml) 2.3. Other hazards contact lenses, if present and easy to do. Continue rinsing. P405: Store locked up. P501: Dispose of contents/container to approved waste disposal site. PBT: This product is not identified as a PBT/vPvB substance. Section 3: Composition/information on ingredients 3.2. Mixtures Page: 2 Hazardous ingredients: FORMIC ACID EINECS 200-579-1 CAS 64-18-6 CHIP Classification - CLP Classification Skin Corr. 1A: H314 Percent 30-60% Section 4: First aid measures 4.1. Description of first aid measures Skin contact: Remove all contaminated clothes and footwear immediately unless stuck to skin. Drench the affected skin with running water for 10 minutes or longer if substance is still on skin. Transfer to hospital if there are burns or symptoms of poisoning. Eye contact: Bathe the eye with running water for 15 minutes. Transfer to hospital for specialist examination. Ingestion: Wash out mouth with water. Do not induce vomiting. Give 1 cup of water to drink every 10 minutes. Transfer to hospital as soon as possible. Inhalation: Remove casualty from exposure ensuring one's own safety whilst doing so. If unconscious and breathing is OK, place in the recovery position. If conscious, ensure the casualty sits or lies down. Transfer to hospital as soon as possible. 4.2. Most important symptoms and effects, both acute and delayed Skin contact: Blistering may occur. Progressive ulceration will occur if treatment is not immediate. Eye contact: Corneal burns may occur. May cause permanent damage. Ingestion: Corrosive burns may appear around the lips. Blood may be vomited. There may be bleeding from the mouth or nose. Inhalation: There may be shortness of breath with a burning sensation in the throat. Exposure may cause coughing or wheezing. Delayed / immediate effects: Immediate effects can be expected after short-term exposure. 4.3. Indication of any immediate medical attention and special treatment needed Immediate / special treatment: Eye bathing equipment should be available on the premises. [cont...] SAFETY DATA SHEET KILROCK K (250mKIlL) R/ BOICGK-K-K(4/0B0ImGl-)K/ MEGA-K (1000ml) Section 5: Fire-fighting measures Page: 3 5.1. Extinguishing media Extinguishing media: Suitable extinguishing media for the surrounding fire should be used. Use water spray to cool containers. 5.2. Special hazards arising from the substance or mixture Exposure hazards: Corrosive. In combustion emits toxic fumes. 5.3. Advice for fire-fighters Advice for fire-fighters: Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes. Section 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Personal precautions: If outside keep bystanders upwind and away from danger point. Do not attempt to take action without suitable protective clothing - see section 8 of SDS. Turn leaking containers leak-side up to prevent the escape of liquid. 6.2. Environmental precautions Environmental precautions: Do not discharge into drains or rivers. Contain the spillage using bunding. 6.3. Methods and material for containment and cleaning up Clean-up procedures: Clean-up should be dealt with only by qualified personnel familiar with the specific substance. Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for disposal by an appropriate method. 6.4. Reference to other sections Reference to other sections: Refer to section 8 of SDS. Refer to section 13 of SDS. Section 7: Handling and storage 7.1. Precautions for safe handling Handling requirements: Avoid direct contact with the substance. Ensure there is sufficient ventilation of the area. Do not handle in a confined space. Avoid the formation or spread of mists in the air. 7.2. Conditions for safe storage, including any incompatibilities Storage conditions: Store in cool, well ventilated area. Keep container tightly closed. 7.3. Specific end use(s) Specific end use(s): No data available. Section 8: Exposure controls/personal protection [cont...] 8.1. Control parameters SAFETY DATA SHEET KILROCK K (250mKlI)LR/ BOICGK-K-K(4/0B0ImGl-)K/ MEGA-K (1000ml) Page: 4 Hazardous ingredients: FORMIC ACID...100% Workplace exposure limits / OELV: State 8 hour TWA UK / IRE 9.6 mg/m3 Respirable dust 15 min. STEL 8 hour TWA - - 15 min. STEL - 8.1. DNEL/PNEC Values DNEL / PNEC No data available. 8.2. Exposure controls Engineering measures: Ensure there is sufficient ventilation of the area. Respiratory protection: Respiratory protective device with particle filter. Gas/vapour filter, type A: organic vapours (EN141). Hand protection: Impermeable gloves. Eye protection: Tightly fitting safety goggles. Ensure eye bath is to hand. Skin protection: Impermeable protective clothing. Environmental: Refer to specific Member State legislation for requirements under Community environmental legislation. Section 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties State: Liquid Colour: Colourless Odour: Characteristic odour Oxidising: Non-oxidising (by EC criteria) Solubility in water: Soluble Boiling point/range�C: >100 Flammability limits %: lower: Not applicable. Flash point�C: Not applicable. Autoflammability�C: Not applicable. Relative density: 1 - 1.2 VOC g/l: Not applicable. 9.2. Other information Other information: No data available. Section 10: Stability and reactivity Melting point/range�C: Not applicable. upper: Not applicable. Part.coeff. n-octanol/water: Not applicable. Vapour pressure: Not applicable. pH: <2 [cont...] SAFETY DATA SHEET KILROCK K (250mKIlL) R/ BOICGK-K-K(4/0B0ImGl-)K/ MEGA-K (1000ml) 10.1. Reactivity Reactivity: Stable under recommended transport or storage conditions. 10.2. Chemical stability Chemical stability: Stable under normal conditions. 10.3. Possibility of hazardous reactions Hazardous reactions: Hazardous reactions will not occur under normal transport or storage conditions. Decomposition may occur on exposure to conditions or materials listed below. 10.4. Conditions to avoid Conditions to avoid: Heat. 10.5. Incompatible materials Materials to avoid: Strong oxidising agents. Strong acids. 10.6. Hazardous decomposition products Haz. decomp. products: In combustion emits toxic fumes. Section 11: Toxicological information 11.1. Information on toxicological effects Page: 5 Hazardous ingredients: FORMIC ACID...100% IVN ORL ORL MUS MUS RAT LD50 LD50 LD50 145 mg/kg 700 mg/kg 1100 mg/kg Relevant effects for mixture: Effect Corrosivity Route OPT INH DRM Basis Hazardous: calculated Symptoms / routes of exposure Skin contact: Blistering may occur. Progressive ulceration will occur if treatment is not immediate. Eye contact: Corneal burns may occur. May cause permanent damage. Ingestion: Corrosive burns may appear around the lips. Blood may be vomited. There may be bleeding from the mouth or nose. Inhalation: There may be shortness of breath with a burning sensation in the throat. Exposure may cause coughing or wheezing. Delayed / immediate effects: Immediate effects can be expected after short-term exposure. Other information: Not applicable. [cont...] SAFETY DATA SHEET KILROCK K (250mKIlL) R/ BOICGK-K-K(4/0B0ImGl-)K/ MEGA-K (1000ml) Section 12: Ecological information Page: 6 12.1. Toxicity Ecotoxicity values: No data available. 12.2. Persistence and degradability Persistence and degradability: Biodegradable. 12.3. Bioaccumulative potential Bioaccumulative potential: No bioaccumulation potential. 12.4. Mobility in soil Mobility: Readily absorbed into soil. 12.5. Results of PBT and vPvB assessment PBT identification: This product is not identified as a PBT/vPvB substance. 12.6. Other adverse effects Other adverse effects: Negligible ecotoxicity. Section 13: Disposal considerations 13.1. Waste treatment methods Disposal operations: Transfer to a suitable container and arrange for collection by specialised disposal company. Disposal of packaging: Dispose of in a regulated landfill site or other method for hazardous or toxic wastes. NB: The user's attention is drawn to the possible existence of regional or national regulations regarding disposal. Section 14: Transport information 14.1. UN number UN number: UN3412 14.2. UN proper shipping name Shipping name: FORMIC ACID 14.3. Transport hazard class(es) Transport class: 8 14.4. Packing group Packing group: II 14.5. Environmental hazards Environmentally hazardous: No Marine pollutant: No [cont...] SAFETY DATA SHEET KILROCK K (250mKIlL) R/ BOICGK-K-K(4/0B0ImGl-)K/ MEGA-K (1000ml) 14.6. Special precautions for user Special precautions: No special precautions. Tunnel code: E Transport category: 2 Section 15: Regulatory information Page: 7 15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture Specific regulations: Not applicable. 15.2. Chemical Safety Assessment Chemical safety assessment: A chemical safety assessment has not been carried out for the substance or the mixture by the supplier. Section 16: Other information Other information Other information: This safety data sheet is prepared in accordance with Commission Regulation (EU) No 453/2010. This safety data sheet is prepared in accordance with Commission Regulation (EC) No 1272/2008. Phrases used in s.2 and s.3: H314: Causes severe skin burns and eye damage. R34: Causes burns. Legend to abbreviations: PNEC = predicted no effect level DNEL = derived no effect level LD50 = median lethal dose LC50 = median lethal concentration EC50 = median effective concentration IC50 = median inhibitory concentration dw = dry weight bw = body weight cc = closed cup oc = open cup MUS = mouse GPG = guinea pig RBT = rabbit HAM = hamster HMN = human MAM = mammal PGN = pigeon IVN = intravenous SCU = subcutaneous [cont...] SAFETY DATA SHEET KILROCK K (250mKIlL) R/ BOICGK-K-K(4/0B0ImGl-)K/ MEGA-K (1000ml) Page: 8 SKN = skin DRM = dermal OCC = occular PCP = phycico-chemical properties Legal disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any damage resulting from handling or from contact with the above product. [final page]