AXIS OS Release Notes

AXIS OS 10.8.1

Release date: week 47 2021

Features

• Updated Apache to version 2.4.51 to increase overall cybersecurity level.

Corrections

• Corrected an issue where the heater would not run at maximum power if only one of the two channels were heated up. Applies to: AXIS P3715-PLVE

AXIS OS 10.8.0

Release date: week 47-49 2021

Features

• Added support in action service for sending notification actions (HTTP/HTTPS), including method, HTTP headers, and body.
• Added support in HW2 action engine UI for specifying method, HTTP headers, and body.
• Added support in preview UI for specifying method, HTTP headers, and body.
• Added support for POST/PUT/PATCH/DELETE HTTP methods in event rule HTTP notifications actions, allowing custom request bodies and HTTP headers. UI support is available in the new web interface.
• Device-level topic prefix support for MQTT messages, enabling reuse of topic prefixes and device IDs.
• Added support to create file paths when exporting to external disks.
• Added support for ONVIF profile M.

Applies to: AXIS FA51/-B, AXIS M1134, AXIS M1135/-E, AXIS M1137/-E, AXIS M3064-V, AXIS M3065-V, AXIS M3066-V, AXIS M3075-V, AXIS M3115-LVE, AXIS M3116-LVE, AXIS M3205-LVE, AXIS M3206-LVE, AXIS M4308-PLE, AXIS P1367/-E, AXIS P1368-E, AXIS P1445-LE, AXIS P1445-LE-3, AXIS P1447-LE, AXIS P1448-LE, AXIS P1455-LE-3, AXIS P3227-LV/-LVE, AXIS P3228-LV/-LVE, AXIS P3245-LVE-3, AXIS P3807-PVE, AXIS P3818-PVE, AXIS P3925-R/LRE, AXIS P3935-LR, AXIS Q1645/-LE, AXIS Q1647/-LE, AXIS Q1659, AXIS Q1700-LE, AXIS Q1785-LE, AXIS Q1786-LE, AXIS Q1951-E, AXIS Q1952-E, AXIS Q3515-LV/-LVE, AXIS Q3517-LV/-LVE, AXIS Q3518-LVE, AXIS Q3527-LVE, AXIS Q6215-LE, AXIS Q9216-SLV, AXIS V5925, AXIS V5938, D101-A XF P3807, ExCam XF P1367, ExCam XF Q1645, ExCam XF Q1785, F101-A XF P1367, F101-A XF Q1785 and XP40-Q1785.

• Added straighten image as a new image correction functionality. Applies to: AXIS P3255-LVE
• Added the possibility to individually control IR-light intensity. Applies to: AXIS P1455-LE and AXIS P1455-LE-3
• Added a 10-band audio equalizer, available via the audio mixer CGI API. Applies to: AXIS M3205-LVE, AXIS M3206-LVE, AXIS Q3515-LV/-LVE, AXIS Q9216-SLV, AXIS P3245-LV/-LVE, AXIS P3247-LV/-LVE and AXIS P3248-LV/-LVE

Corrections

• Corrected a display issue when a user logs in as a viewer on the Statistics tab.
• Improved recording stability. Applies to: AXIS S3008
• Improved autofocus speed. Applies to: AXIS M7104, AXIS M7116, AXIS P5654-E, AXIS P5655-E, AXIS P7304, AXIS Q1700-LE, AXIS Q1785-LE, AXIS Q1786-LE, AXIS Q1798-LE, AXIS Q6074/-E, AXIS Q6075/-E/-S/-SE, AXIS Q6078-E, AXIS Q6135-LE, AXIS Q6215-LE, AXIS Q6315-LE, AXIS Q8752-E, AXIS V5925, AXIS V5938, ExCam XF Q1785, F101-A XF Q1785 and XP40-Q1785
• Corrected an issue where the "not enough power" text overlay was not shown. Applies to: AXIS Q3819-PVE
• Updated the header for H.265 streams to exclude delay information, preventing misinterpretation as B-frames by some video clients. Applies to: AXIS D2110-VE, AXIS I8016-LVE, AXIS M1134, AXIS M1135/-E, AXIS M1137/-E, AXIS M3057-PLVE Mk II, AXIS M3067-P, AXIS M3068-P, AXIS M3077-PLVE, AXIS M3115-LVE, AXIS M3116-LVE, AXIS M4308-PLE, AXIS M7104, AXIS M7116, AXIS P1375/-E, AXIS P1377/-LE, AXIS P1378/-LE, AXIS P1455-LE, AXIS P1455-LE-3, AXIS P3245-V/-VE/-LV/-LVE, AXIS P3245-LVE-3, AXIS P3247-LV/-LVE, AXIS P3248-LV/-LVE, AXIS P3255-LVE, AXIS P3727-PLE, AXIS P3818-PVE, AXIS P3925-R/-LRE, AXIS P3935-LR, AXIS P5654-E, AXIS P5655-E, AXIS P7304, AXIS Q1615/-LE Mk III, AXIS Q1798-LE, AXIS Q1951-E, AXIS Q1952-E, AXIS Q3819-PVE, AXIS Q6074/-E, AXIS Q6075/-E/-S/-SE, AXIS Q6078-E, AXIS Q6135-LE, AXIS Q6315-LE, AXIS Q8752-E, AXIS V5925 and AXIS V5938
• Corrected an issue where the camera sometimes did not recover from night mode. A power cycle is required after upgrade for this fix. Applies to: AXIS M3205-LVE and AXIS M3206-LVE

Limitations

• On single-channel products, text and image overlays are not shown for streams using overview=1. This affects ACAPs like AXIS Video Motion Detection and AXIS Live Privacy Shield. Overlays are also absent from the Image, Privacy mask, and View area tabs in the web interface if a view area is created. Applies to: AXIS M1134, AXIS M1135/-E, AXIS M1137/-E, AXIS M3057-PLVE, AXIS M3058-PLVE, AXIS M3057-PLVE Mk II, AXIS M3064-V, AXIS M3065-V, AXIS M3066-V, AXIS M3075-V, AXIS M3067-P, AXIS M3068-P, AXIS M3115-LVE, AXIS M3116-LVE, AXIS M3205-LVE, AXIS M3206-LVE, AXIS P1375/-E, AXIS P1377/-LE, AXIS P1378/-LE, AXIS P1445-LE, AXIS P1445-LE-3, AXIS P1447-LE, AXIS P1448-LE, AXIS P3245-V/-VE/-LV/-LVE, AXIS P3245-LVE-3, AXIS P3247-LV/-LVE, AXIS P3248-LV/-LVE, AXIS P3255-LVE, AXIS Q1615/-LVE Mk III, AXIS Q1645/-LE, AXIS Q1647/-LE, AXIS Q1645/-LE, AXIS Q1659, AXIS Q1700-LE, AXIS Q1785-LE, AXIS Q1786-LE, AXIS Q1798-LE, AXIS Q3819-PVE, AXIS Q9216-SLV and ExCam XF Q1645.

ACAP Updates

• AXIS Object Analytics 1.0.33 is pre-installed. Applies to: AXIS P3255-LVE, AXIS Q1615/-LE Mk III, AXIS M4308-PLE, AXIS M1137/-E, AXIS P1375/-E, AXIS P1377/-LE, AXIS P1378/-LE, AXIS P1455-LE, AXIS P3245-V/-VE/-LV/-LVE, AXIS P3247-LV/-LVE, AXIS P3248-LV/-LVE, AXIS P3727-PLE, AXIS P5654-E, AXIS P5655-E, AXIS Q1798-LE, AXIS Q3819-PVE, AXIS Q6074/-E, AXIS Q6075/-E/-S/-SE, AXIS Q6078-E, AXIS Q6135-LE and AXIS Q6315-LE.
• Stability improvements
• Minor UI changes

AXIS OS 10.7.3

Release date: October 2021

Corrections

• Improved streaming stability for devices used in AXIS Companion systems. Applies to: AXIS M1137/-E, AXIS P1375/-E, AXIS P1377/-LE, AXIS P1378/-LE, AXIS P1455-LE, AXIS P1455-LE-3, AXIS P3245-V/-LV/-VE/-LVE, AXIS P3245-LVE-3, AXIS P3247-LV/-LVE, AXIS P3248-LV/-LVE, AXIS P5654-E, AXIS P5655-E, AXIS Q1798-LE, AXIS Q6074/-E, AXIS Q6075/-E/-S/-SE, AXIS Q6078-E, AXIS Q6135-LE and AXIS Q6315-LE

ACAP Updates

• Axis Object Analytics 1.0.30 is preinstalled. Corrected an issue with the stream in the configuration web page.

AXIS OS 10.7.2

Release date: October 2021

ACAP Updates - AXIS Q3819-PVE only

• Axis Object Analytics 1.0.30 is preinstalled. Corrected an issue with the stream in the configuration web page.

AXIS OS 10.7.1

Release date: October 2021

Corrections

• Corrected a network issue that on rare occasions could cause the product to lose its internet connection.

AXIS OS 10.7.0

Release date: week 39 - 41 2021

Features

• ACAPs containing a manifest.json file are now fully supported. The manifest.json file contains settings and parameters for the application. The older package.conf file is still supported.
• Net-SNMP is now the new SNMP backend for AXIS OS devices, replacing the legacy backend. It offers enhanced security mechanisms and SNMPv3 authentication. Key changes include: default "initial"-user pre-configured with SHA-1 and AES-128; support for SHA-1, SHA-256, SHA-384, SHA-512 for authentication and AES-128, AES-256 for privacy; migration of SNMP settings upon upgrade (except SNMPv3 user access); support for switching between UDP or TCP transport protocols via VAPIX parameter SNMP.TransportProtocol; multiple SNMPv3 users and access-role configurations are not yet supported.
• Added support for MQTT subscription, enabling incoming MQTT messages as action triggers in the rule engine.
• Added optional API status property in VAPIX API Discovery JSON response body.
• Updated Apache to version 2.4.48 for improved cybersecurity.
• Updated OpenSSL to version 1.1.1l for enhanced minimum cybersecurity.
• Extended the 802.1x EAP-Identity field character limit from 32 to 128 characters.

• Added support for .ogg and .opus encoded mediaclips. Applies to: AXIS A8207-VE, AXIS A8207-VE Mk II, AXIS D2110-VE, AXIS FA54, AXIS I8016-LVE, AXIS M1134, AXIS M1135/-E, AXIS M1137/-E, AXIS M3057-PLVE, AXIS M3057-PLVE Mk II, AXIS M3058-PLVE, AXIS M3064-V, AXIS M3065-V, AXIS M3066-V, AXIS M3075-V, AXIS M3067-P, AXIS M3068-P, AXIS M3077-PLVE, AXIS M3115-LVE, AXIS M3116-LVE, AXIS M3205-LVE, AXIS M3206-LVE, AXIS P1367/-E, AXIS P1368-E, AXIS P1375/-E, AXIS P1377/-LE, AXIS P1378/-LE, AXIS P1455-LE, AXIS P1455-LE-3, AXIS P3227-LV/-LVE, AXIS P3228-LV/-LVE, AXIS P3245-V/-VE/-LV/-LVE, AXIS P3245-LVE-3, AXIS P3247-LV/-LVE, AXIS P3248-LV/-LVE, AXIS P3255-LVE, AXIS P3715-PLVE, AXIS P3719-PLE, AXIS P3807-PVE, AXIS P3925-R/-LRE, AXIS P5655-E, AXIS P8815-2, AXIS Q1615/-LE Mk III, AXIS Q1645/-LE, AXIS Q1647/-LE, AXIS Q1659, AXIS Q1700-LE, AXIS Q1798-LE, AXIS Q3515-LV/-LVE, AXIS Q3517-LV/-LVE/-SLVE, AXIS Q3518-LVE, AXIS Q3527-LVE, AXIS Q6010-E, AXIS Q6074, AXIS Q6075/-E/-S/-SE, AXIS Q6078-E, AXIS Q6100-E, AXIS Q6135-LE, AXIS Q6315-LE, AXIS Q8752-E, AXIS Q9216-SLV, AXIS V5925, AXIS V5938 and ExCam XF Q1645.
• Added straighten image as a new image correction functionality. Applies to: AXIS P3245-V/-VE/-LV/-LVE, AXIS P3247-LV/-LVE, and AXIS P3248-LV/-LVE
• Added web pages for visualizing occupancy value and stop & go signage based on occupancy levels. Applies to: AXIS P8815-2
• Improved privacy protection for customers uploading pipeline debug data to external storage. Applies to: AXIS P8815-2
• Added support for 1080p 60 fps. Applies to: AXIS M1137/-E
• Added the possibility to start/stop object tracking with the autopilot in the camera's event system. Applies to: AXIS Q6010-E and AXIS Q6100-E
• Added the possibility to allow/disallow PTZ movement with directional audio detection in the camera's event system. Applies to: AXIS Q6100-E
• Added support for allocation of max-power via Link Layer Discovery Protocol (LLDP) in addition to PoE-class based power allocation. Applies to: AXIS M3077-PLVE
• Added support for a new NTCIP solution, replacing the previous ACAP implementation. Applies to: AXIS P5654-E, AXIS P5655-E, AXIS Q1700-LE, AXIS Q1785-LE, AXIS Q1786-LE, AXIS Q1798-LE, AXIS Q6010-E, AXIS Q6074/-E, AXIS Q6075/-E/-S/-SE, AXIS Q6078-E, AXIS Q6100-E, AXIS Q6135-LE, AXIS Q6215-LE, AXIS Q6315-LE, AXIS Q8752-E, AXIS V5925, AXIS V5938, ExCam XF Q1785, F101-A XF Q1785 and XP40-Q1785

Corrections

• Corrected CVE-2021-31986.
• Corrected CVE-2021-31988.
• Corrected an issue that prevented legacy motion detection from working.
• Corrected an issue with MQTT subscriptions when reconnecting.
• Corrected MQTT default message to prevent it from starting with an empty string.
• Corrected an issue that caused the anonymous viewer functionality to be removed after upgrade to 10.6.0.
• Audio now uses the new audiodevicecontrol.cgi API, potentially affecting gain values in the web interface but maintaining actual audio levels.
• Corrected an issue that prevented the Sound Intelligence Sound Detector ACAP from getting an audio stream.
• Improved RTP timestamp accuracy for metadata streams.
• Corrected an issue that could cause an RTSP stream to stop after 60+ seconds when streamed to an openRTSP client.
• Corrected the product name in the web interface. Applies to: AXIS M3058-PLVE
• Corrected an issue that caused excessive SNMP PTZ error codes in logs. Applies to: AXIS Q6215-LE and AXIS Q6315-LE
• Masks created in the digital zoom range before upgrade might not cover the same area after upgrade. Applies to: AXIS M7104, AXIS P5654-E, AXIS P5655-E, AXIS P7304, AXIS P7316, AXIS Q1798-LE, AXIS Q6074/-E, AXIS Q6075/-E/-S/-SE, AXIS Q6078-E, AXIS Q6135-LE, AXIS Q6215-LE, AXIS Q6315-LE, AXIS Q8752-E, AXIS V5925 and AXIS V5938
• Corrected an issue where the radar pointed in the wrong direction relative to user input if the stream was rotated before calibration. Applies to: AXIS D2110-VE
• Corrected an issue that could prevent installation configuration in iOS. Applies to: AXIS P3719-PLE, AXIS Q6010-E and AXIS Q6100-E
• Corrected an issue that prevented manual IR Illumination angle adjustment in the web interface. Applies to: AXIS Q1785-LE, AXIS Q1786-LE and AXIS Q1798-LE
• Improved stability when using rotated streams. Applies to: AXIS FA54
• Improved start-up process. Applies to: AXIS P3719-PLE
• Corrected an issue that caused input gain to revert to default value after upgrade. Applies to: AXIS M1134, AXIS M1135/-E, AXIS M1137/-E, AXIS M3057-PLVE Mk II, AXIS M3057-PLVE, AXIS M3058-PLVE, AXIS M3064-V, AXIS M3065-V, AXIS M3066-V, AXIS M3075-V, AXIS M3067-P, AXIS M3068-P, AXIS M3077-PLVE, AXIS M3115-LVE, AXIS M3116-LVE, AXIS M3205-LVE, AXIS M3206-LVE, AXIS P3227-LV/-LVE, AXIS P3228-LV/-LVE, AXIS P3245-V/-VE/-LV/-LVE, AXIS P3245-LVE-3, AXIS P3247-LV/-LVE, AXIS P3248-LV/-LVE, AXIS P3255-LVE, AXIS P3715-PLVE, AXIS P3719-PLE, AXIS P3807-PVE, AXIS P3925-LRE, AXIS P3925-R, AXIS P8815-2, AXIS Q6135-LE abd AXIS Q8752-E

ACAP Updates

• AXIS Video Motion Detection updated to version 4.5.1. Fixed a streaming issue on the configuration web page for some products.
• AXIS Motion Guard 2.3.0 is preinstalled. Fixed a streaming issue on the configuration web page for some products.
• AXIS Fence Guard 2.3.0 is preinstalled. Fixed a streaming issue on the configuration web page for some products.
• AXIS Loitering Guard 2.3.0 is preinstalled. Fixed a streaming issue on the configuration web page for some products.
• Axis Object Analytics 1.0.28 is preinstalled. Relaxed requirements on CGI calls with empty params field to match documented VAPIX API. Fix for buildup of consumed memory over time when specifically using AnyMotion in a crowded scene.

AXIS OS 10.6.10

Release date: July 2021

Corrections

• Improved stability of blocked view detection. Applies to: AXIS P3925-R and AXIS P3935-LR

AXIS OS 10.6.9

Release date: July 2021

Features

• Added the parameter "Locked focus presets" in plain config, which saves new autofocus presets with fixed focus. Applies to: AXIS Q6074/-E and AXIS Q6075/-E/-S/-SE
• Added the parameter "Set preset trigger focus" in plain config, which opens the iris and performs a refocus when a new preset is set. Applies to: AXIS Q6074/-E and AXIS Q6075/-E/-S/-SE

AXIS OS 10.6.8

Release date: July 2021

Corrections

• Improved double talk performance in SIP/VMS calls. Applies to: AXIS A8207-VE, AXIS A8207-VE Mk II and AXIS I8016-LVE

AXIS OS 10.6.7

Release date: July 2021

Corrections

• Corrected an issue with MQTT subscriptions when reconnecting. Applies to: Products in Group A on page 30 and Group B on page 30.

AXIS OS 10.6.6

Release date: June 2021

Corrections

• Corrected an issue with MQTT subscriptions when reconnecting. Applies to: AXIS A8207-VE, AXIS A8207-VE Mk II and AXIS I8016-LVE
• Corrected an issue with O3C-based solutions when accessing the intercom interface remotely. Applies to: AXIS A8207-VE, AXIS A8207-VE Mk II and AXIS I8016-LVE

AXIS OS 10.6.4

Release date: June 2021

Corrections

• Corrected an issue that caused ONVIF conformance to fail. Applies to: AXIS P3719-PLE
• Corrected an issue that could cause streaming to fail to O3C devices. Applies to: AXIS P3719-PLE, AXIS Q6010-E and AXIS Q6100-E

AXIS OS 10.6.1

Release date: June 2021

Corrections

• Enabled Axis Edge Vault. Applies to: AXIS Q3819-PVE

AXIS OS 10.6.0

Release date: week 24 - 26 2021

Features

• Added the possibility to show day/night information in overlay text using #dn, displaying both current and threshold values.
• HTTPS Ciphers are checked, and unsupported ciphers are removed during standard firmware upgrade.
• Added a parameter to disable Apache and OpenSSL version in HTTP(S) responses via Plain Config > System.
• Upgraded OpenSSL to 1.1.1k for improved minimum cybersecurity.
• Added barrel distortion correction. Applies to: AXIS M1134, AXIS M1135/-E and AXIS M1137/-E
• Added object classifications in metadata stream when AXIS Object Analytics ACAP is running. The metadata stream must be restarted if the ACAP restarts. Applies to: AXIS M1137/-E, AXIS P1375/-E, AXIS P1377/-LE, AXIS P1378/-LE, AXIS P1455-LE, AXIS P3245-V/-VE/-LV/-LVE, AXIS P3247-LV/-LVE, AXIS P3248-LV/-LVE, AXIS P3255-LVE, AXIS P5654-E, AXIS P5655-E, AXIS Q1615/-LE Mk III, AXIS Q1798-LE, AXIS Q3819-PVE, AXIS Q6074/-E, AXIS Q6075/-E/-S/-SE, AXIS Q6135-LE and AXIS Q6315-LE
• Support for stream-specific legacy overlays has been removed. The URL option for legacy image and text overlays is no longer supported. Applies to: products in Group A on page 30 and Group B on page 30.
• Added support for ONVIF profile T. Applies to: AXIS P3807-PVE and AXIS Q1659
• Updated AXIS License Plate Verifier to 2.1.0. Applies to: AXIS P1455-LE-3
• Added the option to select which overlay to use in a stream profile. Applies to: products with support for text overlay
• Added "Audio clip playing" as a new condition in the event system. Applies to: all products except AXIS A8207-VE, AXIS A8207-VE Mk II, AXIS I8016-LVE and AXIS S3008
• Changed default values for input and output gain to better reflect normal installations. Values do not change after upgrade, only after default. Applies to: AXIS A8207-VE and AXIS A8207-VE Mk II
• Changed default values for input gain to better reflect normal installations. Values do not change after upgrade, only after default. Applies to: AXIS I8016-LVE

AXIS OS 10.4.5

Release date: March 2021

• AXIS Object Analytics 1.0.19 has been preinstalled. Refer to AXIS Object Analytics for a list of supported products.
• Corrected an AXIS Object Analytics configuration issue that occurred while using HTTPS.

AXIS OS 10.4.3

Release date: March 2021

• Updated AXIS License Plate Verifier to version 1.8.4 for AXIS P1445-LE-3.
• Added option to perform a factory default in combination with upgrading/downgrading. It's mandatory to factory default the product when downgrading to an older firmware. Applies to: AXIS A8207-VE and AXIS A8207-VE Mk II.

AXIS OS 10.4.2

Release date: March 2021

Corrections

• Corrected an issue that prevented PT functionality from working with AXIS T99A10 Positioning Unit 24 V AC/DC. Applies to: AXIS Q1645/-LE, AXIS Q1647/-LE, ExCam XF Q1645, AXIS P1375/-E, AXIS P1377/-LE, F101-A XF P1377, AXIS P1378/-LE and AXIS Q1615/-LE Mk III.

AXIS OS 10.4.1

Release date: March 2021

• Corrected an issue that on rare occasions caused the image in one or more sensors to show horizontal lines or an oversaturated image. Applies to: AXIS Q6010-E and AXIS Q6100-E.

AXIS OS 10.4.0

Release date: week 24 - 26 2021

Features

• Added support for the new action "Publish MQTT", available in the web interface via Events > Device events > Rules setup. This action allows publishing MQTT messages with custom topics and payloads.
• OpenSSL upgraded to version 1.1.1i to fix CVE-2020-1971.
• User login attempts (successful and failed) are now logged in detail when the access log parameter is enabled from Plain Config > System > Access Log.
• For products with view areas, it's now possible to select the default source shown in the web interface (Settings > System > Plain config > Layout > Live view video).
• Added actions "Play audio clip while active" and "Stop playing audio clip" to the event system for products supporting audio out.
• Added support for quad view. Applies to: AXIS Q6010-E and AXIS Q6100-E.
• Added TVI 4K 12.5/15 fps support on channel 1. Note: 4K mode disables channel 3, and cameras connected to the third channel cannot be used. Applies to: AXIS P7304
• Improved angle accuracy. Applies to: AXIS D2110-VE.
• Added support for portcast to support AXIS T6101– and AXIS T6112-based solutions. Applies to: AXIS Q6135-LE.
• Added support for LLDP allocation of max-power, allowing switches to allocate less power to cameras and potentially connect more PoE devices. LLDP can be enabled in Settings > System > PlainConfig > Network > LLDP POE > LLDP Send Max PoE. Applies to: AXIS M3115-LVE and AXIS M3116-LVE.

Corrections

• Corrected an issue that erased the password from MQTT broker connection settings when editing settings, requiring re-entry.
• Corrected an issue that caused MQTT configuration corruption on rare occasions.
• Corrected an issue that could cause an MQTT event to be duplicated upon registering the same event multiple times.
• Updated digital input LogicalState metadata API to consistently use 0/1 across all camera models.
• Corrected an issue where the device sent an EPRT command instead of an EPSV command when transferring an image or video via FTP.
• Corrected an issue where a network share used as a recipient could have its properties overwritten by another network share created from the Storage page.
• Corrected nice names for the PreventDoSAttack parameters in Settings > System > Plain Config > System > PreventDoSAttack.
• Improved Link Layer Discovery Protocol (LLDP) system stability.
• Improved PoE budget management for AXIS S3008.
• Corrected an issue that on rare occasions caused the image to turn green after a power loss. Applies to: AXIS Q6215-LE
• Enabled device preset number for server presets to be set by user. Applies to: AXIS P7304 and AXIS M7104.
• Corrected an issue with the installation height parameter that was previously truncated to an integer value. Applies to: AXIS D2050-VE and AXIS D2110-VE.
• Improved system stability for multisensor products when streaming multiple video streams simultaneously.

Limitations

• When connecting a camera to AXIS M7104 Network Video Encoder on channel 2 only, image disruptions resulting in "No video" may occur. Connecting cameras from left to right starting with channel 1 resolves these disruptions.

ACAP Updates

• AXIS Object Analytics (Machine Learning Processing Unit) updated to version 1.0.18.
• AXIS Object Analytics (Deep Learning Processing Unit) updated to version 1.0.18.

AXIS OS 10.3.4

Release date: February 2021

• Corrected an issue with mirrored image that occurred on some units. Applies to: AXIS P3807-PVE and D101-A XF P3807.

AXIS OS 10.3.3

Release date: February 2021

• Fixed the camera booting issue when the cover top is off for AXIS M3077-PLVE.

AXIS OS 10.3.2

Release date: January 2021

• Improved manual focus adjustment. Applies to: AXIS Q6074/-E, AXIS Q6075/-E/-S/-SE and ExCam XPT Q6075.
• Corrected an issue where gain got higher value when toggling AGC on/off. Applies to: AXIS M3077-PLVE.

AXIS OS 10.3.1

Release date: January 2021

• Added missing help text sections for AXIS P3255-LVE.

AXIS OS 10.3.0.2

Release date: January 2021

• Corrected an issue that sometimes made the IR-LED not work as expected. Applies to: AXIS P1447-LE, AXIS P1448-LE and AXIS P1455-LE.

AXIS OS 10.3.0.1

Release date: January 2021

• AXIS M1134 and AXIS M1135/-E: Products with Hardware ID 924.2, 924, and 925 support firmware 10.3.0.1 and later. Products with HardwareID 7A7.2, 7A7, and 7A8 support all firmware versions. HardwareID can be found in Plain config > Properties > System > HardwareID. For more information, see AXIS Support FAQ.
• AXIS P3245-LV/-LVE, AXIS P3247-LV/-LVE and AXIS P3248-LV/-LVE: Products with HardwareID 910.1 and 910.2 support firmware 10.3.0.1 and later. Products with HardwareID 79F.1 and 79F.2 support all firmware versions. HardwareID can be found in Plain config > Properties > System > HardwareID. For more information, see AXIS Support FAQ.
• AXIS P3245-V/-VE: Products with HardwareID 90F.1 and 90F.2 support firmware 10.3.0.1 and later. Products with HardwareID 79E.1 and 79E.2 support all firmware versions. HardwareID can be found in Plain config > Properties > System > HardwareID. For more information, see AXIS Support FAQ.

AXIS OS 10.3.0

Breaking Changes

• Removed support for trigger data functionality. Support for trigger data will continue on 9.80 LTS.

Features

• Updated OpenSSL to version 1.1.1h for improved minimum cybersecurity.
• MQTT is now activated by default upon power loss or reboot if it was previously enabled.
• Added the possibility to set a wear level for the SD card that the event system can trigger on. This is set and displayed on the Storage page if the SD card supports this feature.
• Added support for audit logging when a user exports video from the device's edge recording (SD card, network share).
• Improved video streaming stability in multi-stream and ONVIF Audio Backchannel scenarios.
• Added support for LLDP allocation of max-power, allowing switches to allocate less power to cameras and potentially connect more PoE devices. LLDP can be enabled in Settings > System > PlainConfig > Network > LLDP POE > LLDP Send Max PoE. Refer to LLDP max-power allocation for more information.
• Camstreamer ACAP is no longer preinstalled on newer versions of AXIS V5925; a voucher for download is included.
• Added support for controlling PTZ using the VISCA protocol over IP and RS232 for AXIS V5925.
• Added the feature image freeze for AXIS V5925.
• Improved controls for switching video output in onscreen controls for AXIS V5925.
• Added support for live occupancy metrics and stateful events based on occupancy thresholds for AXIS P8815-2.
• Improved autofocus accuracy. Applies to: AXIS P1367/-E, AXIS P1368-E, AXIS P1445-LE, AXIS P1445-LE-3, AXIS P1447-LE, AXIS P1448-LE, AXIS Q1645/-LE, AXIS Q1647/-LE, AXIS Q3515-LV/-LVE, AXIS Q3517-LV/-LVE, AXIS Q3518-LVE and AXIS Q3527-LVE.
• Added installation feature quad and 360 view for newer fisheye cameras like AXIS M3067-P and AXIS M3068-P.
• Added support for a new revision of the audio solution in AXIS M7304. This revision is included in products with part number 01680-001-02. Products with this revision will not work with firmware older than the current release.

Corrections

• Corrected an issue that caused the audio transfer over HTTPS to not work properly, reverting audio-gain-level behavior to that of AXIS OS releases up to 10.0.2. An upgrade to AXIS OS 10.3 is mandatory for users experiencing audio-related issues on AXIS OS 10.1 and 10.2. AXIS OS 10.1 and 10.2 will be unavailable for download from www.axis.com after the release of AXIS OS 10.3.
• Corrected an issue that prevented setting the gain individually on the left and right channel on products with stereo audio input.
• Corrected an issue that caused PKCS#12-formatted certificate uploads to fail when certain special characters were used as a password.
• Corrected text for time offset in the Date & Time page; the offset is now shown in milliseconds instead of seconds.
• Corrected an issue that caused the Quality of Service (QoS) value to not be respected in always multicast mode.
• Corrected an issue that prevented the device from streaming in always-multicast mode after video stream processing restart.
• Corrected an issue where overlays were sometimes placed incorrectly in the video stream. Applies to: products in Group C on page 31.
• Corrected a focus issue that occurred after upgrade. Applies to: AXIS Q1615/-LE Mk III, AXIS Q1645/-LE and AXIS Q1647/-LE.
• Corrected an issue that always displayed a current focal length value of 0 in overlays for AXIS Q1798-LE.
• Corrected an issue for AXIS P1377-LE that did not provide the entire OID list and corresponding information when polling via SNMP.
• Corrected an issue that on rare occasions could cause the live image to blink in dark conditions. Applies to: products in Group A on page 30.
• Corrected an issue with pause-frame handling that could cause network disconnections if pause-frames were enabled and used in the network. Applies to: products in Group A on page 30 and Group B on page 30.
• Corrected an issue that prevented the device from utilizing available network bandwidth in high-latency networks (e.g., 4G cellular). Applies to: products in Group A on page 30 and Group B on page 30.
• Removed 100Mbit/s and 10Mbit/s half and full duplex network speed options from Plain Config > Network > Connection Type for AXIS Q6010-E.
• Corrected header response videostatus.cgi to display headers on individual lines instead of a single line for AXIS P7304.
• Corrected an issue to allow users to select balanced audio input in AXIS V5925.
• Corrected an issue that caused video clients to not display a low-fps video stream due to missing base fps info in VUI timing info. Applies to: products in Group A on page 30 and Group B on page 30.

ACAP Updates

• AXIS Object Analytics (Machine Learning Processing Unit) updated to version 1.0.17.
• AXIS Object Analytics (Deep Learning Processing Unit) updated to version 1.0.17.
• AXIS Video Motion Detection updated to version 4.4.9.
• AXIS Guard Suite updated to version 2.2.8.

AXIS OS 10.2.2

Release date: 2020-12-02

Features

• Added health monitoring of radar transmitter and receiver for AXIS D2110-VE.

Corrections

• Corrected an issue that sometimes made AXIS D2110-VE lose the ability to detect objects.

AXIS OS 10.2.1

Release date: 2020-11-20

ACAP Updates

• Updated AXIS License Plate Verifier to version 1.80.0 for AXIS P1445-LE-3.

AXIS OS 10.2.0

Release date: 2020-11-10

Features

• All camera products now support SRTP (Secure Real-time Transport Protocol).
• Updated Apache web server to version 2.4.46 for improved minimum cybersecurity.
• Support for supervised digital audio added to products with digital audio; four new events for supervising digital audio input are available in the event system.
• Removed support for AXIS Internet Dynamic DNS Service (axiscam.net). Refer to AXIS Support for more information.
• Removed deprecated VAPIX Record/Play CGI for MJPEG playback. RTSP protocol is recommended for all formats (H.264, H.265, MJPEG, etc.).
• Removed support for NAT Traversal. AXIS Secure Remote Access or similar services are recommended. The following NAT Traversal related VAPIX parameters have been removed: Network.UPnP.NATTraversal.Active, Network.UPnP.NATTraversal.Enabled, Network.UPnP.NATTraversal.ExternalIPAddress, Network.UPnP.NATTraversal.MaxPort, Network.UPnP.NATTraversal.MinPort, Network.UPnP.NATTraversal.Router.
• Added support for ONVIF profile T to AXIS Q6215-LE. Refer to ONVIF profile T for more information.

AXIS OS 10.1.2

Release date: 2020-10-05

Corrections

• Improved manual focus behavior for AXIS Q6074/-E and AXIS Q6075/-E/-S.
• Corrected an issue that caused privacy masks to be rendered incorrectly, affecting AXIS FA54 and AXIS Q6010-E.
• Corrected a stability issue that could occur when AXIS P3719-PLE or AXIS Q6010-E was connected to a VMS and used motion stability.

AXIS OS 10.1.1

Release date: 2020-10-01

Known Bugs/Limitations - AXIS P8815-2 only

• Export data function within the Statistics page provides data for the last 30 days.
• Only live view and live counts from the primary device are shown in the Statistics page.
• Primary and secondary devices must be restored to factory default settings to renew the certificate.
• Data successfully reported to the server cannot be re-sent.
• UTC is used for time stamps of data reported to the server.
• Turning back the device's date and time will result in the application not counting; the device needs to be restarted to resume normal operation.

AXIS OS 10.1.0

Release date: 2020-09-23

Features

• Added support for Remote Syslog API, enabling Axis devices to send log messages to a remote syslog server. Configuration is available via the web interface (Settings > System > TCP/IP) or the VAPIX API. Refer to the example for usage.
• The download.cgi API has been removed; exportrecording.cgi (introduced in 5.60) is the substitute.
• Deprecated parameters Time.ServerTime and Time.ServerDate have been removed.
• Added support for a new overlay modifier "%v" that displays seconds in 1/1000 fractions.
• Added support for HTTP Strict Transport Security (HSTS) when using HTTPS.
• Added support for certificate-based client authentication in MQTT.
• Support for average bitrate (ABR) has been added to selected products. Refer to Average bitrate (ABR) for more information.
• A factory default is now mandatory when attempting to downgrade the device. Refer to How to downgrade for more information.
• Improved performance when building an RTSP video stream by 30%.
• Updated UPnP to version 1.8.7, patching CVE-2020-12695 (Callstranger).
• The following HTTP headers are now configured by default to enhance cybersecurity: X-Frame-Options: SAMEORIGIN, X-Content-Type-Options: nosniff, X-XSS-Protection: 1; mode=block.
• Changes in 802.1x: Support for IEEE 802.1x-2010 added, providing EAPoL version 3 and changing default IEEE 802.1x EAPoL setting from version 1 to 3. Support for configuring 802.1X without a CA certificate is added, allowing device authentication on any network. The EAP-TLS-identity field in 802.1x configuration defaults to "axis-". IEEE 802.1x is enabled by default on Axis products supporting AXIS Edge Vault (e.g., AXIS S3008), enabling Axis device ID utilization via IEEE 802.1AR.
• Added autotracking 2 for AXIS P5654-E and AXIS P5655-E.
• Removed support for SMB versions lower than 2.1 in AXIS S3008.
• Added the possibility to use AXIS Q6010-E in solo mode without a PTZ camera connected.
• Added automatic gain control for AXIS M3075-V. Refer to Automatic gain control for more information.

ACAP Updates

• AXIS License Plate Verifier updated to version 1.7.2 (pre-installed on AXIS P1445 LE-3 only).
• AXIS Guard Suite updated to version 2.2.7.
• AXIS Video Motion Detection updated to version 4.4.8.
• AXIS Object Analytics Beta preinstalled on additional products (e.g., AXIS Q1615/-LE Mk III) compatible with deep learning analytics.

AXIS OS 10.0.2

Corrections

• Corrected an issue that sometimes caused event-triggered recordings to fail.
• Corrected an issue for AXIS S3008 that prohibited the use of new firmware.

AXIS OS 10.0.1

Release date: 2020-07-06

Corrections

• Corrected an issue that prevented mute functionality. Applies to: AXIS M3064-V, AXIS M3065-V, AXIS M3066-V, AXIS M3075-V and AXIS P3719-PLE.
• Corrected an issue that prevented the heater from working properly. Applies to: AXIS P3245-V/-VE/-LV/-LVE, AXIS Q3515-LV/-LVE, AXIS Q3517-LV/-LVE and AXIS Q3518-LVE.

AXIS OS 10.0.0

Release date: 2020-11-10

Features

• Products with audio clips now support MP3 format.
• ONVIF profile T added to ExCam XF Q1785 and F101-A XF Q1785. Refer to ONVIF profile T for more information.
• LLDP allocation for max-power is available for AXIS M3205-LVE and AXIS M3206-LVE, allowing switches to allocate less power to cameras and potentially connect more PoE devices. LLDP can be enabled in Settings > System > PlainConfig > Network > LLDP POE > LLDP Send Max PoE. Refer to LLDP max-power allocation for more information.
• Added VAPIX API for enabling/disabling all privacy masks. Exception: AXIS D2050-VE.
• Administrator credentials are now required to access privacymask.cgi. Exception: AXIS D2050-VE.
• Added the possibility to retrieve the device Owner Authentication Key (OAK) in the web interface. This functionality requires direct internet access for the product.
• Updated Apache to version 2.4.43 for improved cybersecurity.
• Updated OpenSSL to version 1.1.1g for improved minimum cybersecurity.

Corrections

• Corrected an issue that sometimes caused problems with edge sync between the camera and Genetec VMS.
• Corrected an issue that prevented cross-device triggering to work properly when IPv6 was used.
• Corrected an issue that sometimes made it impossible to edit action rules after upgrade.
• Corrected an issue in products with temperature compensation that could potentially cause bad focus.
• Corrected an issue that caused AXIS Q6215-LE to get stuck with the IR-cut filter off after power-loss.
• Corrected an issue in radar products where the user interface did not show current values when radar transmission was toggled.

ACAP Updates

• AXIS License Plate Verifier updated to version 1.7.0 (pre-installed on AXIS P1445 LE-3 only).
• AXIS Object Analytics Beta version 1.0.4 preinstalled.

AXIS OS 9.80.3.5

Features

• Updated Apache to version 2.4.48 for improved cybersecurity.
• Updated curl to version 7.78.0 for improved cybersecurity.

Corrections

• The porttest-cgi is removed from the platform.
• Corrected an issue that could cause an RTSP stream to stop after 60+ seconds when streamed to an openRTSP client.
• Corrected an issue that interrupted NTP time synchronization between the Axis device and NTP server when the NTP server was unstable and experienced fluctuating time changes.
• Ensured audio and video frames are grouped correctly in exportrecording.cgi.
• Corrected the following CVEs: CVE-2021-31988, CVE-2021-31987, CVE-2021-31986, CVE-2021-27219, CVE-2021-27218, CVE-2020-26558.
• Corrected an issue that prevented the mute signal from being properly transmitted to the audio controller. Applies to: AXIS Companion Cube L/-LW and AXIS M1065-L/-LW

AXIS OS 9.80.3.4

Note: Only for AXIS Q6074/-E, AXIS Q6075/-E, D201-S XPT Q6075 and ExCam XPT Q6075.

Features

• General improvements to the LTS 2020 platform.
• Hardware ID updates: Hardware IDs can be found in Plain config > Properties > System > HardwareID. Products with HardwareID 918, 917, 916, 915, and 914 support firmware 10.6.5 and later, or 9.80.3.4 and later on LTS 2020. Products with HardwareID 7D9, 7DA, 7B0, 7B1, and 7FA support all firmware versions.

AXIS OS 9.80.3.3

Features

• Updated OpenSSH to version 8.6p1 for improved minimum cybersecurity.
• Added support for dynamic power allocation via Link Layer Discovery Protocol (LLDP) in addition to PoE-class based power allocation, allowing switches to allocate less power to cameras and potentially connect more PoE devices. LLDP can be enabled in Settings > System > PlainConfig > Network > LLDP POE > LLDP Send Max PoE. Applies to: AXIS M3115-LVE and AXIS M3116-LVE.

Corrections

• Corrected an issue that did not account for MTU packet fragmentation for IEEE 802.1x authentication, preventing proper authentication on networks with MTU configured to 1410 or lower.
• Corrected an issue that prevented the device from streaming in always-multicast mode after video stream processing restart.
• Extended the 802.1x EAP-Identity field character limit from 32 to 128 characters.
• Increased the number of characters allowed in the name of an Action Event Condition from 80 to 512.
• Corrected an issue that caused already established secure connections (HTTPS or One-Click Cloud Connections) to be interrupted. Applies to: AXIS Q6074/-E and AXIS Q6075/-E/-S.
• Corrected an issue that caused distorted images in cropped corridor mode. Applies to: AXIS D2050-VE, AXIS FA54, AXIS M3057-PLVE, AXIS M3058, AXIS P1367/-E, AXIS P1368-E, AXIS P1445-LE, AXIS P1445-LE-3, AXIS P1447-LE, AXIS P1448-LE, AXIS P3227-LV/-LVE, AXIS P3228-LV/-LVE, AXIS P3717-PLE, AXIS P3807-PVE, AXIS Q1645/-LE, AXIS Q1647/-LE, AXIS Q1659, AXIS Q1700-LE, AXIS Q1785-LE, AXIS Q1786-LE, AXIS Q3515-LV/-LVE, AXIS Q3517-LV/-LVE/-SLVE, AXIS Q3518-LVE, AXIS Q3527-LVE, AXIS Q6215-LE, ExCam XF Q1785, F101-A Q1785 and XP40-Q1785.

AXIS OS 8.40.4.3

Features

• Updated Apache to version 2.4.48 for improved cybersecurity.
• Updated OpenSSL to version 1.1.1l for improved cybersecurity.
• Updated curl to version 7.78.0 for improved cybersecurity.
• Updated OpenSSH to version 8.6p1 for improved minimum cybersecurity.

Corrections

• Corrected an issue that, in combination with some VMSes and low resolution, could cause brief disconnections in the video stream.
• Improved memory management in the network services daemon.
• Improved memory management in the DHCP lease update daemon.
• Corrected an issue that prevented the Axis device from responding with "HTTP 403 Forbidden" when the source-ip address was blocked via PreventDOSAttack in Plain Config > System (previously returned "HTTP 401 Unauthorized").
• Corrected nice names for the PreventDoSAttack parameters in Settings > System > Plain Config > System > PreventDoSAttack.
• Corrected an issue that did not account for MTU packet fragmentation for IEEE 802.1x authentication, preventing proper authentication on networks with MTU configured to 1410 or lower.
• Corrected an issue that prevented streaming in always-multicast mode on rare occasions.
• Extended the 802.1x EAP-Identity field character limit from 32 to 128 characters.
• Corrected an issue that interrupted NTP time synchronization between the Axis device and NTP server when the NTP server was unstable and experienced fluctuating time changes.
• Corrected an issue that could cause an RTSP stream to stop after 60+ seconds when streamed to an openRTSP client.
• Corrected the following CVEs: CVE-2021-31988, CVE-2021-31987, CVE-2021-31986, CVE-2021-27219, CVE-2021-27218, CVE-2020-26558. Affected products: AXIS M1045-LW, AXIS M1065-LW, AXIS M3045-WV, AXIS M3044-WV, AXIS Companion Cube LW and AXIS Companion Dome WV. CVE-2019-12450.
• Corrected an issue that caused images to be unusually dark when using WDR mode. Applies to: AXIS Companion Bullet LE, AXIS Companion Eye L/-LVE, AXIS M1124/-E, AXIS M1125/-E, AXIS M2025-LE, AXIS M3104-L/-LVE, AXIS M3105-L/-LVE, AXIS P1244, AXIS P1245, AXIS P1254, AXIS P1264, AXIS P1265, AXIS P1275, AXIS P1280-E, AXIS P1290-E, AXIS P1364/-E, AXIS P1365/-E Mk II, AXIS P1435-E/-LE, AXIS P3224-V/-VE/-LV/-LVE Mk II, AXIS P3225-V/-VE/-LV/-LVE Mk II, AXIS P3235-LV/-LVE, AXIS P3374-V/-LV, AXIS P3375-V/-VE/-LV/-LVE, AXIS Q1615/-E Mk II, AXIS Q1941-E, AXIS Q1941-E PT Mount, AXIS Q1942-E, AXIS Q1942-E PT Mount, AXIS Q3615-VE, AXIS Q3617-VE, AXIS Q6154-E, AXIS Q8641-E, AXIS Q8642-E and XP40-Q1942.
• Corrected an issue that caused ACAP installation using packagemanager.cgi to fail. Applies to: AXIS M3045-V.
• Improved system stability when streaming multiple video streams simultaneously. Applies to: AXIS FA54.
• Improved stability in recording management. Applies to: AXIS Companion Cube L/-LW, AXIS Companion Dome V/-WV, AXIS M1045-LW, AXIS M1065-L/-LW, AXIS M2026-LE, AXIS M3044-V/-WV, AXIS M3045-V/-WV, AXIS M3046-V, AXIS P9106-V, AXIS M3106-L/-LVE.

AXIS OS 8.40.4.2

Features

• Updated OpenSSL to version 1.1.1k to fix CVE-2021-3449 and CVE-2021-3450.
• Updated curl to version 7.73.0 for improved cybersecurity.

Corrections

• Improved Link Layer Discovery Protocol (LLDP) system stability.
• Corrected an issue that caused IEEE 802.1x network authentication to fail sometimes after unexpected reboots.
• Corrected an issue in oak.cgi that could cause invalid requests.
• Corrected an issue that caused the Quality of Service (QoS) value to not be respected in always multicast mode.
• Corrected an issue that caused PKCS#12-formatted certificate uploads to fail when certain special characters were used as a password.
• Corrected an issue that caused video clients to not display a low-FPS video stream due to missing base FPS info in VUI timing info. Applies to: AXIS FA54, AXIS M3057-PLVE, AXIS M3058-PLVE, AXIS P1367/-E, AXIS P1368-E, AXIS P1445-LE, AXIS P1445-LE-3, AXIS P1447-LE, AXIS P1448-LE, AXIS P3227-LV/-LVE, AXIS P3228-LV/-LVE, AXIS Q1645/-LE, AXIS Q1647/-LE, AXIS Q1659, AXIS Q1785-LE, AXIS Q1786-LE, AXIS Q3515-LV/-LVE, AXIS Q3517-LV/-LVE/-SLVE and AXIS Q3518-LVE.
• Corrected an issue that could cause live image to blink in dark conditions on rare occasions. Applies to: AXIS FA54, AXIS M3057-PLVE, AXIS M3058-PLVE, AXIS P1367/-E, AXIS P1368-E, AXIS P1445-LE, AXIS P1445-LE-3, AXIS P1447-LE, AXIS P1448-LE, AXIS P3227-LV/-LVE, AXIS P3228-LV/-LVE, AXIS Q1645/-LE, AXIS Q1647/-LE, AXIS Q1659, AXIS Q1785-LE, AXIS Q1786-LE, AXIS Q3515-LV/-LVE, AXIS Q3517-LV/-LVE/-SLVE and AXIS Q3518-LVE.
• Corrected an issue with pause-frame handling that could cause network disconnections if pause-frames were enabled and used in the network. Applies to: AXIS FA54, AXIS M3057-PLVE, AXIS M3058-PLVE, AXIS P1367/-E, AXIS P1368-E, AXIS P1445-LE, AXIS P1445-LE-3, AXIS P1447-LE, AXIS P1448-LE, AXIS P3227-LV/-LVE, AXIS P3228-LV/-LVE, AXIS Q1645/-LE, AXIS Q1647/-LE, AXIS Q1659, AXIS Q1785-LE, AXIS Q1786-LE, AXIS Q3515-LV/-LVE, AXIS Q3517-LV/-LVE/-SLVE and AXIS Q3518-LVE.
• Corrected an issue that prevented the device from utilizing available network bandwidth in high-latency networks (e.g., 4G cellular). Applies to: AXIS FA54, AXIS M3057-PLVE, AXIS M3058-PLVE, AXIS P1367/-E, AXIS P1368-E, AXIS P1445-LE, AXIS P1445-LE-3, AXIS P1447-LE, AXIS P1448-LE, AXIS P3227-LV/-LVE, AXIS P3228-LV/-LVE, AXIS Q1645/-LE, AXIS Q1647/-LE, AXIS Q1659, AXIS Q1785-LE, AXIS Q1786-LE, AXIS Q3515-LV/-LVE, AXIS Q3517-LV/-LVE/-SLVE and AXIS Q3518-LVE.

AXIS OS 8.40.4.1

Features

• Updated Apache to version 2.4.46 for improved cybersecurity.
• Added support for HTTP Strict Transport Security (HSTS) when using HTTPS.
• Reduced time to build an RTSP video stream by 30% and more.

Corrections

• Corrected an issue that caused an error message to appear when pressing the test button of an event using HTTP recipients.
• Corrected an issue that caused distorted H.265 streams on rare occasions. Applies to: AXIS M2026-LE Mk II, AXIS M3015, AXIS M3016, and AXIS M3106-L/-LVE Mk II.
• Corrected an issue that could cause image shake when Electronic Image Stabilization (EIS) was activated during high zoom (x32) operations. Applies to: AXIS Q1785-LE and AXIS Q1786-LE.

AXIS OS 6.50.5.5

Features

• Updated Apache to version 2.4.48 for improved cybersecurity.
• Updated OpenSSH to version 8.6p1 for improved minimum cybersecurity.
• Updated curl to version 7.78.0 for improved cybersecurity.
• Updated OpenSSL to version 1.1.1l for improved minimum cybersecurity.

Corrections

• Corrected the following CVEs: CVE-2021-31988, CVE-2021-31987, CVE-2021-31986, CVE-2021-27219, CVE-2021-27218, CVE-2019-12450.
• Corrected an issue that caused video clients (e.g., VLC) to not display a low-FPS video stream due to missing base FPS info in VUI timing info.

AXIS OS 6.50.5.4

Features

• Updated OpenSSL to version 1.1.1k to fix CVE-2021-3449 and CVE-2021-3450.

Corrections

• Corrected an issue that caused the Quality of Service (QoS) value to not be respected in always multicast mode.

AXIS OS 6.50.5.3

Features

• Updated Apache to version 2.4.46 for improved cybersecurity.

Corrections

• Corrected an issue where the web interface test button did not work when mounting network-attached storage (NAS) configured with SMB v3.
• Added a sensitivity parameter for tampering detection in PlainConfig, adjustable by the user. Applies to: AXIS P1244, AXIS P1245, AXIS P1254, AXIS P1264, AXIS P1265, AXIS P1275, AXIS P1364/-E, AXIS P1365/-E Mk II and AXIS P1435-E/-LE.
• Corrected an issue that caused failure to send images with action rules to email recipients. Applies to: AXIS P1244, AXIS P1245, AXIS P1254, AXIS P1264, AXIS P1265, AXIS P1275, AXIS P1364/-E, AXIS P1365/-E Mk II and AXIS P1435-E/-LE.