Everbilt Submersible Utility Pump
Quick Reference Guide
See instruction manual for complete instructional details.
Installation and Operation Instructions
-
Attach a 1" garden hose to the discharge of the pump. If a smaller 3/4" hose is preferred, attach the threaded adapter to the pump discharge before attaching the hose.
-
Install the pump on a firm, level base. Avoid pumping mud, rock, or other debris.
Diagram shows pump placement with measurements: 1-1/2" clearance from the bottom, and 3/16" clearance from the side.
-
The pump will need a minimum of 1-1/2" of water to prime. Once primed, the pump can remove water down to 3/16".
-
Plug the pump in to a 115V GFCI Power Outlet.
Diagram shows pump connected to a GFCI outlet.
-
To avoid airlock, the pump must be sufficiently submerged before pumping. If the pump is not pumping, tilt the pump to release the air bubbles from the bottom, then return to the vertical position. Unplug the pump from its power source when finished pumping; do not let the pump run dry.
