User Manual(PG-SW001) D-pad A/B/X/Y Screenshot button START R1/R2 Programming switch Right 3D & downward L3 R2 Travel Switch L2 Travel Switch N1/N2 M1/M2 Left 3D & downward L3 Turbo L1/L2 Type-C port SELECT HOME LED indicatior Fig.2 Accessories List Game Controller x1 User Manual x1 Type-C Charging Cable x1 D-pad plate x1
off vibration, the default medium intensity vibration). Programming function. Button Illustration. N-Switch Bluetooth Gamepad. User Manual(PG-SW001).
User Manual(PG-SW001) D-pad A/B/X/Y Screenshot button START R1/R2 Programming switch Right 3D & downward L3 R2 Travel Switch L2 Travel Switch N1/N2 M1/M2 Left 3D & downward L3 Turbo L1/L2 Type-C port SELECT HOME LED indicatior Fig.2 Accessories List Game Controller x1 User Manual x1 Type-C Charging Cable x1 D-pad plate x1
N-Switch Bluetooth Gamepad User Manual(PG-SW001) Product Application: 1 This gamepad is suitable for playing games on N-Switch mainframes and Android devices; 2 This gamepad supports wireless connection to N-Switch mainframes, and also supports wired N-Switch bases to operate N-Switch games; 3 The function buttons of the gamepad correspond to the button functions of the N-Switch_pro controller, and support the TURBO continuous function; 4 Back button M1M2N1N2 custom programming; 5 Supports left 3D and cross button interchangeable functions,replaces 3D and function buttons according to the user's own experience, resulting in a better experience. 7 Support L2R2 travel control, use players to get a better gaming experience. 8 This gamepad supports six-axis gyroscope function and supports vibration function(Switch console); 9 Ergonomic structure,comfortable feeling; Due to the official game platform software upgrades or source code changes and other not resist factors caused some of the game can not be played or connected with our Gamepad, iPega company has no responsibility.iPega reserve the right of final interpretation for this. Button Illustration L1/L2 SELECT Left 3D & downward L3 Turbo D-pad Type-C port R1/R2 START A/B/X/Y Screenshot button Right 3D & downward L3 LED indicatior HOME R2 Travel Switch N1/N2 Programming switch L2 Travel Switch M1/M2 3D joystick & cross button interchange operation instruction 1, Follow Figure 1 to open the gamepad left cover from arrow, take out the revolving key (Figure 2); 2,. Turn the rotary switch to the triangle mark with the rotary key (Figure 3)Take out the 3D joystick and cross button (Figure 4), and then 3D joystick and cross can be interchanged; Fig.1 Fig.3 Fig.2 Fig.4 3. After the interchange is completed, use rotary key to rotate the switch to align the notch mark, and then close the cover. Electrical Parameters: 1.Product sizeL155*W106*H63mm 2.Product weight200±5g 3.Input voltage/current:DC5V/500mA 4.Working voltage/current: DC3.7V/80mA 5.Maximum working current<200mA 6.Continuous playing time: >6H 7.Charging timeabout 3H 8.BT3.0transmission distance8M 9.Battery650mAh 10.Standby time30days after fully charged Usage Instruction: Wireless connection mode 1. SWITCH console connection: Turn on game console, enter the console and click game icon, click"Change grip/order"; At the same time, Press and hold down Y+HOME button for 3 seconds to enter Switch pairing mode, game pad LED1-LED4 will flash in a loop, the channel light will be assigned by console and always on! Gamepad LED indicator will be always on! Already connected, directly press Home button, LED1-LED4 flash in circle, connected automaticly! 2. Android connection (standard HID): Press and hold down B+HOME buttons for 3 seconds to enter Android standard pairing mode, gamepad LED1 will flash quickly, search "PG-SW001" on Android phone/tablet/Android smart TV, select the connection! After connected, gamepad LED1 will be always on! When it is already connected, directly press HOME button, LED1 flash slowly, connected automaticly! 3. PC wireless mode(Standard HID): Press and hold down B+HOME for 3 seconds, LED1 flash quickly to enter PC bluetooth pairing mode, after connected LED1 will be always on; Press B+HOME button for 3 seconds to enter standard HID pairing mode, LED1 flash quickly, after PC conncetd, LED1 will be always on! Already connected! Wired connection mode 1. PC wired connection: direct plug-in cable 1, 4 lights flash, default as 360 mode; Hold down-(select) + +(start) for 3 seconds to switch to P3 mode(2, 3 lights flash); 2. Android wired connection: plug-in cable and LED1-4 flash; TURBO function 1. Action button include (A/B/X/Y/L/ZL/R/ZR)8 buttons, all of which can be manually set to TURBO function; 2. Setting method: Hold down action button, press TURBO button to turn it on, repeat operation to close TURBO function; 3. When product enter sleep modearestart after turn off, the TURBO function is automatically cleared before setting. If the TURBO function is enabled, it must be reset. 4. TURBO can adjust the shooting frequency: Press (-/+)+TURBO at the same time to adjust the connection frequency. The frequency setting is for all TURBO button synchronously. After setting, the frequency of the TURBO function will changeat the same time. The adjustment is divided into three gears: one gear triggers 5 times per second; the second gear triggers 10 times per second: the third gear triggers 15 times per second; (default is triggered 10 times per second) When product enter sleep modearestart after turn off, the TURBO function is automatically cleared before setting. If the TURBO function is enabled, it must be reset. Programming function 1. NORMAL is the normal mode: To turn off programming button function; 2. CUSTOM is the custom mode: To enable programming button function. 3. After turning on, press the programmed button + + (START) to program the back button, each button can be programmed with multiple buttons; (A/B/X/Y/L1/L2/R1/R2/L3/R3/Up/Down/Left/Right) can be programmed; (M1/M2/N1/N2) Non-replicable button combo Setting method (up to 12 button combinations can be set for a single programming button): 1. Press and hold the programming button(M1/M2/N1/N2) + + (START) to be set at the same time. After the pairing indicator flashes quickly, release the button to enter the setting mode. 2. At this point, press one or more of the regular function buttons (A/B/X/Y/L1/L2/R1/R2/L3/R3/ Up/Down/Left/Right) to be copied. 3. Press the programming button again to exit, the setting is completed, and the mode indicator is always on. 4. To clear the programming buttin function, press and hold the programming button + +(START) that needs to be set at the same time. After the pairing indicator flashes quickly, release the button and enter the setting mode. Press the programming button again to clear. Programming button function. After the product is slept, shut down and restarted, the TURBO and programming functions are automatically cleared before. If this function is enabled, it must be reset! Gamepad Charging/Sleep/Wake up/ Shut down function: æ Charging function: a. Power synchronization: The power of the gamepad is synchronized with the power displayed by the console;; b. Low-power alarm: In the wireless connection mode, when the power of the gamepad is too low, the current mode indicator flashes slowly; c. Charging indication when shutting down: 4 indicators flash slowly when charging, and the indicator light turn off after fully charged; ç Sleep/Wake up/ Shutdown fucntion: a. When The N-Switch console screen is off or the game controller is no operation within 5 minutes, it will automatically shuts down; b. In the power-on status, press and hold the HOME button for 5 seconds, the product is turned off, and all the LED indicators are off; c. When you need to use it again, you need to press HOME button to wake up and you can connect again. è Motor vibration adjustment: Vibration adjustment (switch mode) Press the cross button (up/down) + TURBO button at the same time to adjust the motor vibration intensity, 4 levels can be adjusted (the minimum is the off vibration, the default medium intensity vibration) Gamepad correction method Optimize the problem of 3D virtual position change after 3D and cross button exchange. After the 3D and the cross button are exchanged, re-correct the left 3D virtual position by pressing and holding "L1" + "+ (START)" for 3 seconds, accompanied by 1S vibration. In shutdown status Press "B"+"-(select)"+"HOME" to enter the six-axis calibration. Two groups of LED1 LED2/ LED3 LED4 lights flash each other. Press "+(START)" to correct. (Keep the gamepad steady during calibration and do not move) Notes: 1. Please do not store this product in wet or high-temperature areas. 2. Don't knap, beat, drub, pierce, or try to decompose this product, to avoid unnecessary damage to the product. 3. The product has built-in batteries, and please don't discard them together with the garbages. 4. Don't charge the controller in a place near the fire or other heat source. 5. Non professional personnel should not disassemble the product, otherwise it will not be covered in the after-sales warranty service. Accessories List Game Controller x1 User Manual x1 Type-C Charging Cable x1 D-pad plate x1 N-Switch (PG-SW001) : 1 N-SwitchPC 2 N-SwitchN-SwitchN-Switch 3 N-Switch_proTURBO 4 M1M2N1N2 5 3D3D 7 L2R2 8 N-Switch 9 , QQ837350687 0755-2791 8998 9:30-17:30 ipega L1/L2 SELECT 3DL3 Turbo Type-C R1/R2 START A/B/X/Y 3DR3 HOME/ R2 N1/N2 L2 M1/M2 3D 1.1 2 2.(3) 3D4 3D 1 3 2 4 1.L155*W106*H63mm 2.200±5g 3./DC5V/500mA 4./DC3.7V/80mA 5.<200mA 6.: >6H 7.3 8.3.08M 9.650mAh 10.30 : 1. N-SWITCH "/" Y+HOME3N-SwitchLED1-LED4 LEDHOMELED1-LED4 3. 2. (HID) B+HOME3LED1// "PG-SW001"LED1 HOMELED1 3. PC(HID): B+HOME31PC1 B+HOME3HIDLED1PC LED1 1. PC14360 -(select) + +(start)P323 2. 1-4 TURBO 1. (A/B/X/Y/L/ZL/R/ZR) 8TURBO 2. TURBO TURBO 3. TURBOTURBO 4. TURBO-/++TURBO TURBOTURBO 51015 10 TURBO 1. Normal 2. Custom 3. + +(START) (A/B/X/Y/L1/L2/R1/R2/L3/R3//// (M1/M2/N1/N2) 12 1. (M1/M2/N1/N2)+ +(START) 2. (A/B/X/Y/L1/L2/R1/R2/L3/R3//// 3. 4. + +(START) TURBO ///: a. b. c. 4 // a. N-Switch5 b. HOME5LED c. HOME N-Switch/+TURBO 4 3D 3D 3D"L1"+"+(START)"33D1S "B"+"-(select)"+"HOME"LED1LED2/ LED3 LED4"+(START)" 1. 2. 3. 4. 5.,; x1 x1 Type-C x1 x1Adobe PDF library 15.00 Adobe Illustrator(R) 17.0