File info: application/pdf · 21 pages · 427.03KB
SPD PEDALS - Shimano
DM-MAPD001-01. Dealer's Manual. ROAD. MTB. Trekking. City Touring/. Comfort Bike. URBAN SPORT. E-BIKE. SPD PEDALS. XTR. PD-M9100. PD-M9120.
Full PDF Document
If the inline viewer fails, it will open the original document in compatibility mode automatically. You can also open the file directly.
Extracted Text
(English) DM-MAPD001-01 ROAD City Touring/ Comfort Bike MTB URBAN SPORT Dealer's Manual Trekking E-BIKE SPD PEDALS XTR PD-M9100 PD-M9120 DEORE XT PD-M8100 PD-M8120 CONTENTS CONTENTS..................................................................................2 IMPORTANT NOTICE...................................................................3 TO ENSURE SAFETY....................................................................4 LIST OF TOOLS TO BE USED.......................................................7 INSTALLATION/REMOVAL..........................................................8 Installing cleats........................................................................................8 ��Types of cleats............................................................................................................................ 8 ��Temporarily installing cleats..................................................................................................... 8 ��Adjusting and setting cleat positions..................................................................................... 11 ��Installing waterproof seals..................................................................................................... 11 Installing to the crank...........................................................................12 MAINTENANCE.........................................................................13 Adjusting the cleat holding force of the pedals.................................13 Adjusting axle unit rotation.................................................................14 Replacing body covers..........................................................................17 Installing/removing the reflectors.......................................................18 ��Installing the reflectors........................................................................................................... 18 ��Removing the reflectors.......................................................................................................... 20 2 IMPORTANT NOTICE IMPORTANT NOTICE ��This dealer's manual is intended primarily for use by professional bicycle mechanics. Users who are not professionally trained for bicycle assembly should not attempt to install the components themselves using the dealer's manuals. If any part of the information on the manual is unclear to you, do not proceed with the installation. Instead, consult a place of purchase or a bicycle dealer for their assistance. ��Make sure to read all owner's manuals included with the product. ��Do not disassemble or modify the product other than as stated in the information contained in this dealer's manual. ��All owner's manuals and dealer's manuals can be viewed on-line on our website (http:// si.shimano.com). ��Customers who do not use the internet may have to contact their place of purchase to receive a hard copy of the user's manual. You may print out a user's manual to hand to your customer or you may need to ask the nearest SHIMANO sales office for a hard copy of the user's manual. ��Please observe the appropriate rules and regulations of the country, state or region in which you conduct your business as a dealer. For safety, be sure to read this dealer's manual thoroughly before use, and follow it for correct use. The following instructions must be observed at all times in order to prevent personal injury and physical damage to equipment and surroundings. The instructions are classified according to the degree of danger or damage which may occur if the product is used incorrectly. DANGER Failure to follow the instructions will result in death or serious injury. WARNING Failure to follow the instructions could result in death or serious injury. CAUTION Failure to follow the instructions could cause personal injury or physical damage to equipment and surroundings. 3 TO ENSURE SAFETY TO ENSURE SAFETY WARNING ��Be sure to follow the instructions provided in the owner's manuals when installing the product. It is recommended to use SHIMANO genuine parts only. If parts such as bolts and nuts become loose or damaged, the bicycle may suddenly fall over, which may cause serious injury. In addition, if adjustments are not carried out correctly, problems may occur, and the bicycle may suddenly fall over, which may cause serious injury. �� Be sure to wear safety glasses or goggles to protect your eyes while performing maintenance tasks such as replacing parts. ��After reading the dealer's manual thoroughly, keep it in a safe place for later reference. Be sure to also inform users of the following: WARNING TO PARENT/GUARDIAN ��For child safety, make sure the child uses this product correctly by following the instructions below. Both guardians and children should gain an adequate understanding of the content of this manual. Failure to follow the provided instructions may lead to serious injury. ��SPD pedals are designed to be released only when intended. They are not designed to be released automatically when you have fallen off the bicycle. ��Before attempting to ride with these pedals and cleats (shoes), make sure you understand the operation of the engagement/release mechanism for the pedals and cleats (shoes). ��Before attempting to ride with these pedals and cleats, apply the brakes, then place one foot on the ground and practice engaging and releasing each cleat from its pedal until you can do so naturally and with minimal effort. ��Ride on level ground first until you become accustomed to engaging and releasing your cleats from the pedals. ��Before riding, adjust the cleat holding force of the pedals to your liking. If the cleat holding force of the pedals is low, the cleats may become accidentally released and you may lose balance and fall off the bicycle. If the cleat holding force of the pedals is high, the cleats cannot be easily released. 4 TO ENSURE SAFETY ��When riding at low speed or when there is a possibility that you might need to stop riding, (for example, when doing a U-turn, nearing an intersection, riding uphill or turning a blind curve), release your cleats from the pedals beforehand so that you can quickly put your feet onto the ground at any time. ��Use a lighter cleat holding force for attaching the pedal cleats when riding in adverse conditions. ��Keep cleats and bindings out of dirt and debris to ensure proper engagement and release. ��Remember to check the cleats periodically for wear. When the cleats are worn, replace them, and adjust the cleat holding force before riding and after replacing the pedal cleats. ��Use only SPD shoes with this product. Other types of shoes may not release from the pedals, or may release unexpectedly. ��Use only SHIMANO cleats (SM-SH51/SM-SH56) and make sure that the mounting bolts are tightened securely to the shoes. If the warnings above are not followed, your shoes may not come out of the pedals when you intend or they may come out unexpectedly or accidentally, and severe injury may result. ��Do not continue riding the bicycle if the reflectors are dirty or damaged. Otherwise, it becomes more difficult for others to see you. ��Reflectors (SM-PD60) that are available for this pedal are sold separately. ��Be sure to attach reflectors to the bicycle when traveling on roads. NOTICE Be sure to also inform users of the following: ��Check that there is no looseness in any fastening sections before riding the bicycle. ��Check that there is no looseness in the cleats or spacers before riding the bicycle. ��If pedaling performance does not feel normal, check the bicycle once more. ��If you experience any trouble with the rotating parts of the pedal, the pedal may require adjustment. Consult a place of purchase or a distributor. 5 TO ENSURE SAFETY ��Be sure to retighten the crank arms and pedals at periodic intervals at the place of purchase or a distributor. ��Products are not guaranteed against natural wear and deterioration from normal use and aging. ��For maximum performance we highly recommend Shimano lubricants and maintenance products. The actual product may differ from the illustration because this manual is intended mainly to explain the procedures for using the product. 6 LIST OF TOOLS TO BE USED LIST OF TOOLS TO BE USED The following tools are needed for installation/removal, adjustment, and maintenance purposes. Tool 2.5 mm hexagon wrench 3 mm hexagon wrench 4 mm hexagon wrench 8 mm hexagon wrench 7 mm spanner 8 mm spanner 10 mm spanner 15 mm spanner 17 mm spanner Hexalobular [#10] Screwdriver 7 INSTALLATION/REMOVAL Installing cleats INSTALLATION/REMOVAL Installing cleats Types of cleats The release mode varies depending on the type of cleats being used. Type of cleats being used Single release mode cleats SM-SH51 (black) Multiple release mode cleats SM-SH56 (silver, gold) Release mode These cleats only release when the heel is moved outward. They will not release if the heel is twisted in any other direction. The cleats can be released by twisting in any direction. Temporarily installing cleats 1. Remove the rubber cover over the cleat mounting holes. * This step may not be necessary depending on the type of shoe. Rubber cover 8 INSTALLATION/REMOVAL Installing cleats 2. Set the cleat nut. Remove the sockliner, and then set along the elongated holes. * This step may not be necessary depending on the type of shoe. Cleat nut Sockliner 3. Temporarily install the cleats. Use the cleat mounting bolts to temporarily tighten each part, in the order shown in the figure. The cleats are compatible with both left and right pedals. Cleat mounting bolt 2.5 N�m (temporary) Cleat adapter Toe side Cleat 9 INSTALLATION/REMOVAL Installing cleats TECH TIPS Use cleat spacers in the following cases. When using spacers, use only one per SPD compatible shoe. ��If blocks on the shoe soles are high, causing them to get caught on the pedals, it prevents smooth engagement of the shoes with the pedals. ��If dirt and debris build up on the shoe soles or pedals, it prevents smooth engagement of the shoes with the pedals. ��The cleat spacer is only compatible with SHIMANO cleats (SM-SH51/SM-SH56). Cleat mounting bolt 2.5 N�m (temporary) Cleat adapter Cleat side Sole side Cleat Cleat spacer 10 INSTALLATION/REMOVAL Installing cleats Adjusting and setting cleat positions Cleat mounting bolt 5 - 6 N�m 1. Confirm the optimal cleat positions. Repeatedly adjust and confirm for each foot to determine the optimal cleat positions. * The cleat has an adjustment range of 20 mm front to back and 5 mm right to left. 2. Securely tighten the cleats. Tighten the cleat mounting bolt using the specified torque. Installing waterproof seals 1. If your SHIMANO shoes came packaged with waterproof seals, attach the waterproof seals after securely tightening the cleats. Remove the sockliner and attach the waterproof seal. Waterproof seal Sockliner 11 INSTALLATION/REMOVAL Installing to the crank Installing to the crank 1. Apply a small amount of grease to the threads to prevent sticking. 2. Install the pedals using an 8 mm hexagon wrench. The right pedal has a right-hand thread; the left pedal has a left-hand thread. 35 - 55 N�m NOTICE ��Pay attention to the difference between the left and right pedals. Right pedal Left pedal No groove in the thread. Right-hand thread There is a groove in the thread. Left-hand thread 3. Remove any roughness or burrs in the fastening section, if detected. 12 MAINTENANCE Adjusting the cleat holding force of the pedals MAINTENANCE Adjusting the cleat holding force of the pedals 1. Turn the adjustment bolt and adjust to the optimal cleat holding force when releasing the cleats from the bindings. � Turning the adjustment bolt clockwise increases the cleat holding force, and turning it counterclockwise decreases it. � Clicking the adjustment bolt once changes the tension one step. There are four clicks per turn. � The adjustment bolt is located at the rear of each binding, resulting in four positions in total. � Equalize the cleat holding forces at all positions by checking the adjustment plate position and counting the number of turns of the adjustment bolts. Adjustment bolt Weakest position Adjustment bolt Strongest position Adjustment bolt Decrease Increase (PD-M9100/PD-M9120) (PD-M8100/PD-M8120) Decrease Increase Adjustment plate NOTICE ��In order to prevent accidental cleat release and ensure that release is possible when needed, make sure that the cleat holding force is properly adjusted. ��If the cleats are not adjusted equally, it can cause the rider difficulty in engaging or releasing the pedals. The cleat holding force for the right and left pedals should be adjusted so they are equal. 13 MAINTENANCE Adjusting axle unit rotation Adjusting axle unit rotation Adjustment is required if the rotating parts are not functioning properly. Follow the procedure shown below. Reference: Parts breakdown PD-M9100/PD-M9120 Lock bush PD-M8100/PD-M8120 Cone Lock nut Lock bush Cone Lock nut 14 MAINTENANCE Adjusting axle unit rotation 1. Loosen the lock bush and remove the axle unit. The lock bush of the right pedal has a left-hand thread; the lock bush of the left pedal has a right-hand thread. Lock bush (PD-M9100/PD-M9120) (PD-M8100/PD-M8120) 2. Loosen the lock nut. Use a vise or other tool to hold the axle unit in place, and then use the following tools to loosen it. Lock nut Cone (PD-M9100/PD-M9120) (PD-M8100/PD-M8120) 15 MAINTENANCE Adjusting axle unit rotation TECH TIPS ��Right-hand thread: Black-colored (without slit) If the fitted lock nut is black-colored (without slit), the cone and the lock nut have a right-hand thread. Right-hand thread: Black (without slit) ��Left-hand thread: Black-colored (with slit) If the fitted lock nut is black-colored (with slit), the cone and the lock nut have a left-hand thread. Left-hand thread: Black (with slit) ��The rotating parts are fastened when the axle unit is set into the pedal. Adjust them slightly loosely before setup. 3. Turn the cone to adjust the rotation. 4. With the cone locked, tighten the lock nut in place. If rotation is loose after setting the axle unit into the pedal, readjust from Step 2. Lock nut 5 - 7 N�m Cone (PD-M9100/PD-M9120) (PD-M8100/PD-M8120) 16 MAINTENANCE Replacing body covers 5. Remove old grease and apply an appropriate amount of new grease to the bottom of the pedal linkage. TECH TIPS ��Apply grease to the extent that it does not flow out when the axle is set into the pedal (about 1.5 g). 6. Insert the axle unit into the pedal, then tighten the lock bush. Lock bush 9 - 12 N�m (PD-M9100/PD-M9120) 9 - 12 N�m (PD-M8100/PD-M8120) Replacing body covers Cleats and body covers become worn and need to be replaced periodically. Cleats and body covers should be replaced when they become difficult to release, or start to release with much less effort than when they were in new condition. 1. Replace body covers as shown in the figure. Tighten the three bolts using equal force. Body cover mounting bolt 2.7 - 3.5 N�m 17 MAINTENANCE Installing/removing the reflectors Installing/removing the reflectors Installing the reflectors The type of reflector to use varies depending on the specifications. Use SM-PD60 for standard type, or SM-PD22 for short type. The left side and right side SM-PD60 reflectors are different. For left For right Front (during installation) ``SM-PD60/SM-PD22 1. Set the spring force to the weakest setting so that the reflector is easier to insert. Adjust by turning the adjustment bolt on the pedal. Adjustment bolt (PD-M9100/PD-M9120) Weakest position Adjustment bolt (PD-M8100/PD-M8120) Adjustment plate 18 MAINTENANCE Installing/removing the reflectors 2. Insert the reflector tab into the body cover groove in the pedal. SM-PD60 SM-PD22 Push in Body cover groove Body cover groove Tab Tab 3. Fit the tab on the opposite side into the rear lever on the pedal. As shown in the figure, use a slotted screwdriver or other tool to fit it. Rear lever 4. Set the spring force to the strongest setting to prevent detachment. Adjust by turning the adjustment bolt on the pedal. Adjustment bolt (PD-M9100/PD-M9120) Strongest position Adjustment bolt (PD-M8100/PD-M8120) Adjustment plate 19 MAINTENANCE Installing/removing the reflectors Removing the reflectors ``SM-PD60/SM-PD22 1. Turn the adjustment bolt on the pedal to adjust the spring force to the weakest setting. Adjustment bolt (PD-M9100/PD-M9120) Weakest position Adjustment bolt (PD-M8100/PD-M8120) Adjustment plate 2. Pry the reflector tab out from the rear lever of the pedal. As shown in the figure, use a slotted screwdriver or other tool to pry it out. * If using the side from which the reflector was removed as the SPD pedal, first readjust the cleat holding force prior to use. Rear lever Tab 20 Please note: specifications are subject to change for improvement without notice. (English) � Feb. 2019 by SHIMANO INC. ITP