neabot C1 4000Pa Self-Emptying Robot Vacuum Cleaner and Mop User Guide
File info: application/pdf · 28 pages · 3.68MB
新设计扫地机-说明书-日本认证用-20210113-英文
User manual
Neabot Tech Co.,Limited Q11 Neabot NoMo Q11 2AZLE-Q11 2AZLEQ11 q11
GUANGDONG PIEBOT ROBOTICS TECHNOLOGY CO., LTD C1-01 Floor sweeping robot 2AZB3C1-01 2AZB3C101 c1 01
Full PDF Document
If the inline viewer fails, it will open the original document in compatibility mode automatically. You can also open the file directly.
Extracted Text
OPEN
Neabot C1
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The module in this product is labeled with its own FCC ID. The FCC ID is not visible when the module is installed inside another device. Therefore, the outside of the device into which the module is installed must also display a label referring to the module. The final end device must be labeled in a visible area with the following "Contains FCC ID: 2AMM6-825X1CA"
About Your Product Specifications
1-2 3
4-7 8-9 10 11-14 15 15 16-23 24-25
Start/stop Recharge
Speaker Linging LiDAR
Air outlet Bottom mop release button
Built-in lidar
Dust box release button Integrated Water tank dust box
Right brush Right drive wheel
Main brush
Force shutdown button Short press to close Bottom mop release button
Front casters wheel Cliff sensor Left drive wheel
Dust bin release button Dust box buckle Dust box
Shell Hepa Filter Hepa Filter Bracket Hepa Filter Filter sponge Hepa Filter Bracket Cover
OPEN
Flip cover Dust container Indicator light Infrared mirror
Charging contacts Trash port
Top View
Flip cover sealing ring
Fan filter bracket
Dust channel (perspective view)
Power cord
8
9
About Your Product Specifications
1.Product Specifications
Neabot NoMo Max Robot Vacuum
Product Model Rated Input Working Voltage Product Dimersions
RS0030W 24V1A 14.4V 350*350*87mm
Self-emptying Dustbin
Product Model Rated Input Rated Output Power (working state) Product Dimensions Net Weight
DS0030W 100V 50/60Hz 24V1A 1050W 396*274*315mm About5.3kg
Due to the continuous improvement of the product, the product in this information is subject to the actual product, and our company reserves the right to update the product.
10
0.5m / 1.6ft
0.5m / 1.6ft
1.2m / 4ft
/ /
� 4 cliff sensors at the bottom of the robot. � Charging contacts at the bottom of the robot.
Cliff sensor
OPEN
Infrared mirror Charging contacts