ZXLSL-243

ZXLSL-243

Instructions - Amazon AWS

Connect 2 pin (red/black) connector from the switch to the power supply port on controller. Connect 2 pin (yellow) connector from the switch to the flash.

www.HeiseLED.com

Original Document

If the viewer doesn’t load, open the PDF directly.

Extracted Text

HE-MUSTR-W

Wire Instructions

1) Connect 2 pin (red/black) connector from the switch to the power supply port on controller.
2) Connect 2 pin (yellow) connector from the switch to the flash pattern port on controller.
3) Connect loose wires from switch, Red to +12V, Black to Chassis Ground.

4) Connect 1 extension wire to each of the light heads. 5) Connect the extension wires to the LED light head ports on the controller.

Operation
On/Off Switch: Turns controller on and off. Will resume last flash pattern.
Button Switch: With controller on, each press of the button switch will cycle light heads to the next of the 15 flash patterns

386-257-2956

www.HeiseLED.com

460 Walker Street, Holly Hill, FL 32117