the number of changes required to instruction manuals when. equipment designs are changed. ■ Equipped with auto-reference and remote zero-ad-justment functions A...
Smart automation technology ... All models have an M18 male thread for easy and quick mount- ing. ... once the power is turned back on after setup changes. 42.
All models have an M18 male thread for easy and quick mount- ing. Furthermore the models ... once the power is turned back on after setup changes. 36. IO-Link.
Sensors for Factory Automation Short Form Short form SENSORS CONTENT 3 Page IO-Link Sensors........................................................... 6 IO-Link. DP-100L · HG-C1000L · FX-550L. . . . . . . . . . . . . . . . . . . . 6 GX-300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Photoelectric Sensors / Standard Sensors.......................... 12 CX-400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 NX5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 CY-100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Photoelectric Sensors / Miniature Sensors.........................20 EX-Z. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 EX-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 EX-20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 EX-30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 PM-25/45/65. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 PM2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Photoelectric Sensors / Trigonometric Sensors..................33 EQ-500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 EQ-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Photoelectric Sensors / AREA Sensors ..............................36 NA1-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 NA1-PK5/ NA1-PK3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Fiber-optic Sensors......................................................40 FX-100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 FX-301. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 FX-311. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 FX-500/550. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Standard Fibers..........................................................48 Fibers with integrated high-precision plug. . . . . . . . . . . . . . . . . . . 48 Threaded fibers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Square head fibers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Cylindrical fibers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Fibers with sleeve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Flat fibers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Wide beam fibers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Convergent reflective fibers for glass detection. . . . . . . . . . . . . . . 56 Heat-resistant fibers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Chemical-resistant fibers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Vacuum-resistant fibers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Fibers for liquid leak/liquid detection. . . . . . . . . . . . . . . . . . . . . . . 59 Lens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Fiber sensors Communication Units..................................61 Communication units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Mark Sensors.............................................................62 LX-100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Page Laser Sensors............................................................64 EX-L200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 LS-400. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 LS-500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Safety Sensors...........................................................70 SF4D.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 SF4B (V2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 SF4B-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 SF4C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 SF2B/SF2C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 SG-P. . . . . . N.E W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 ST4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 SF-C21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 SF-C10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Pressure & Flow Sensors...............................................88 DP-0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 DP-100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 DPC-100/ DPH-100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 DPC-L100 / DPH-L100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 FM-200. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Inductive Proximity Sensors...........................................98 GX-300 . . . . N.E W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 GX-M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 GX-F/H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Measurement Sensors................................................ 106 HG-S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 HG-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 HL-G1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 HL-C2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 HG-T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 GP-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 Ionizers/Electrostatic Sensors...................................... 118 ER-Q. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 ER-F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 ER-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 ER-VW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 ER-V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 EC-G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 EF-S1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Accessories............................................................. 129 Application examples Electronics Automotive Woodworking industry Packaging industry Glass/Wafer production 003 People counting + +Electronic part discharging 5 Everything from a single source With over 100 years of innovation and manufacturing expertise, Panasonic Industry Europe remains committed to its vision of creating "A Better Life, A Better World." Panasonic can look back on decades of experience in the electronics industry and, thanks to its dedicated customer orientation, is a competent and reliable partner for customers throughout Europe when it comes to technical expertise in combination with solution orientation. As a provider of tailor-made solutions, we focus on offering our customers products and services in the Mobility, Living Space and Business sectors that make a difference thanks to our proprietary innovations. Smart automation technology The factory of the future will achieve new levels of productivity, effectiveness and profitability through comprehensive networking. Equipment and components from Panasonic Industry Europe offer leading-edge Industry 4.0 features, as connectivity, energy efficiency, reliability and sturdiness play a pivotal role in modern production environments. The Panasonic Industry Europe portfolio not only offers key electronic components, devices, modules and software but also complete solutions for production lines in a wide variety of industries. Panasonic Industry`s comprehensive know-how along the entire value chain, combined with a corporate culture geared to customer needs, enables it to offer customerspecific solutions that extend beyond the products. Our experience as a manufacturer and a sales partner for components and products allows us to share our experience with our customers. Customer wishes are specifically integrated into the development of new products, so that we can surpass our role as a supplier and become a competent, long-term partner for our customers. A new performance class of innovative sensor technology Over the past ten years, Panasonic has developed a wide range of high-quality sensors that fit into our portfolio of a provider of complete solutions for factory automation. Besides through-beam and retroreflective types, reflective sensors and optical fiber photoelectric sensors, we also offer laser and eddy current and contact analog sensors that provide precise measurement results even in the most complicated of applications. Our delivery program also includes safety sensors, photoelectric sensors for special applications, inductive proximity switches and miniature pressure sensors for relative or differential pressure measurement, and ionizers for Electro Static Discharge (ESD) applications. Of course, we adapt our sensors to your individual requirements in order to ensure optimal functionality and efficiency. Service In addition to an expert hotline, the extensive service from Panasonic Industry Europe also includes workshops and on-site service to ensure that our sensors are used reliably and effectively. Apart from the broad product portfolio of sensors, Panasonic Industry Europe also offers programmable logic controllers, touch terminals, drive technology, energy management systems, ionizers, automation components and many other products and complete solutions. 6 IO-LINK SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Connection to the field level The standardized IO-Link technology makes connection to the field level easier than ever before. Accessories Sensors can communicate with the defined masters via EtherCAT, Profinet or EtherNet/IP. IO-Link DP-100L · HG-C1000L · FX-550L Standardized connection to the field level Self-diagnosis function IO-Link All IO-Link sensors from Panasonic have an integrated Sensors self-diagnosis function. The function monitors the function parameters specific to the sensor type and automatically outputs a warning signal if deviations from the specified behavior occur. Users save time because for maintenance it is sufficient to monitor only one signal instead of a number of sensor parameters. Technical specifications HG-C1000L Cable type M12 connector type Measuring range Repeatability Linearity Beam diameter Beam source Supply voltage Switching and communication line (C/Q) Control output (DO) Response time Degree of protection Communication specification Baud rate Process data Transmission cycle time Cable Material Dimensions (HxWxD) HG-C1030L3-P HG-C1030L3-P-J 30±5mm 10m Approx. 50m HG-C1050L3-P HG-C1100L3-P HG-C1200L3-P HG-C1400L3-P HG-C1050L3-P-J HG-C1100L3-P-J HG-C1200L3-P-J HG-C1400L3-P-J 50±15mm 100±35mm 200±80mm 400±200mm 30m 70m 200m 300m (200-400mm) 800m (400-600mm) ±0.1% F.S. ±0.2% F.S. ±0.3% F.S. Approx. 70m Approx. 120m Approx. 300m Approx. 500m Red semiconductor laser (655nm), Class 2 (JIS/IEC/GB)/Class II (FDA) 12 to 24V DC ±10% IO-Link specification V1.1 COM3 (230.4kbit/s) 4 bytes 1ms PNP open-collector transistor, max. 50mA Switchable between high speed (1.5ms), standard (5ms), and high precision (10ms) IP67 Cable type: 4-wire PVC cable, 2m M12 connector type: 4-wire PVC cable, 0.3m Enclosure: die-cast aluminum, front cover: acrylic 44x20x25mm 7 DP-100L Pigtailed type M12 connector type Type Low pressure type High pressure type Low pressure type High pressure type Model number DP-101ZL3-M-P DP-102ZL3-M-P DP-101ZL3-M-P-C DP-102ZL3-M-P-C Rated pressure range (note 1) -1 bar to 1 bar (-100.0 to +100.0kPa) -1 bar to +10 bar (-0.100 to +1.0MPa) -1 to 1 bar (-100.0 to +100.0kPa) -1 bar to +10 bar (-0.100 to +1.0MPa) Applicable fluid Non-corrosive gas Supply voltage 12 to 24V DC ±10% Communication specification IO-Link specification V1.1 Switching and communication Baud rate line (C/Q) Process data COM3 (230.4kbit/s) 4 bytes Transmission cycle time 1ms Control output (DO) PNP open-collector transistor, max. 50mA Output operation Normally open contact (NO) / normally closed contact (NC) selectable Output modes 3 modes: EASY, hysteresis mode, window comparator mode Hysteresis Minimum 1 digit (variable) Repeatability (within ±2 digits) ± 0.1% FS ± 0.2% FS ± 0.1% FS ± 0.2% FS Response time 2.5ms, 5ms, 10ms, 25ms, 50ms, 100ms, 250ms, 500ms, 1000ms, 5000ms selectable by key operation LED indicator LED (orange) Pressure port M5 female thread Material Housing: PBT, LC display: Acrylic, Pressure port: SUS 303, thread: brass, buttons: silicon rubber Connection method Connector (note 2) M12 connector Dimensions (HxWxD) 30x30x42.5mm Accessories CN-14A-C2 pigtail type 2m: 1 pc. M12 connector cable 0.3m: 1 pc. Notes: 1.) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20°C. Reference pressure = 1atm 2.) The cable CN-14A-C2 is included IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories IO-Link Sensors FX-550L Type Model number Supply voltage Communication specification Switching and communica- Baud rate tion line (C/Q) Process data Transmission cycle time Control output (DO) Emitting element (modulated) Response time Sensitivity setting Incident light sensitivity setting Incident light intensity display range Degree of protection Ambient temperature Connection method Material Dimensions (HxWxD) Pigtailed type M12 connector type FX-551L3-P-C2 FX-551L3-P-J 12 to 24V DC ±10% IO-Link specification V1.1 COM3 (230.4kbit/s) 4 bytes 1ms PNP open-collector transistor, max. 50mA Red LED (Peak emission wavelength: 660nm) Adjustable. STD: min. 250s, LONG: min. 2ms, U-LG: min. 4ms, HYPR: min. 24ms 2-point teaching, limit teaching, full auto-teaching, manual adjustment Incorporated, 4 steps Adjustable. STD: 0 to 4000, LONG: 0 to 8000, U-LG / HYPR: 0 to 9999 IP40 -10 to +55°C For 4 to 7 sensors in series connection: -10 to +50°C; for 8 to 16 sensors in series connection:: -10 to +45°C (no condensation or freezing). Storage: -20 to +70°C 0.2mm2 4-core cab tire cable, 2m 0.2mm2 4-core cab tire cable with M12 connector, 0.3m Housing and protective cover: Polycarbonate; buttons: Polyacetal 34x10x75mm 8 IO-LINK SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors GX-300 Cylindrical Inductive sensor with IO-Link type Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories IOT ready With the implemented IO-Link technology network integration is easy. The IO-Link models can be used as normal digital PNP output sensors or providing information about the sensor level Modbus Modbus TCP TCP or the current sensor condition.via IO-Link interface. This is perfect for predictive maintenance and applications with higher expectations. Typical field network To PLC To PLC IO-Link Sensors *CC-Link IE Field and CC-Link are trademarks of Mitsubishi Electric Corporation, and are controlled by the CC-Link Partner Association. DeviceNet and EtherNet/IP are registered trademarks of ODVA (Open DeviceNet Vender Association, Inc.). EtherCAT is a registered trademark of Beckhoff Automation GmbH. Modbus is a registered trademark of Schneider Automation, Inc. master Green indicator flashes in 1-second intervals during I/O-Link communication. IO-Link Master Unit for CC-Link IE Field SC-LG2-CEF-P GX-312M-A-P IO-Link usage example 1 Using the process data, the sensor transmits the detection level (8 bits) to the host device over IO-Link. IO-Link usage example 3 Wire disconnection When wire breakage or short-circuit occurs, the sensor notifies the host device by using the IO-Link event notification function. This enables quick identification of malfunctioning part to ensure smooth maintenance. ON/OFF signal + Sensor information IO-Link usage example 2 The IO-Link device has an IODD (IO Device Description) file containing identification information such as the device vendor's name and model number. Workers on the manufacturing floor can load and utilize this information. Operation mode switching information N.O. N.C. IO-Link usage example 4 The operation mode can be toggled between N.O. and N.C. using IO-Link communication. 9 DC 3-wire type ( Shielded type) Type Model No. (note 2) Normally Open Rated sensing distance Stable sensing distance (note 3) Standard sensing object (note 7) Hysteresis Supply voltage (note 4) Current consumption Control output Communication specification Switching and communication line (C/Q) Baud rate Process data Transmission cycle time Response Frequency (note 5) Protection Ambient temperature Dimension (HxWxD) Material Connection method (note 6) GX-308M-A-P- 1.5mm 0 to 1.2mm 8x8mm 2kHZ M8x37.8mm Shielded type Threaded type GX-312M-A-P- GX-318M-A-P- 2.0mm 5mm 0 to 1.6 mm 0 to 4 mm 12x12mm 18x18mm Max. 10% of measurement distance 10-30V DC ±10% (note1) max. 16mA PNP open-collector transistor, 200mA (note 2) IO-Link specification V1.1 COM3 (230.4kbit/s) PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE2_2) 0.4ms 1.5kHz 0.6kHz IP67 (IEC) -40 to +85°C M12x47.1mm M18x55.3mm Case: Nickel-plated brass [stainless steel (SUS303) for GX-308M(K)-], Sensing part: Polybutylene terephthalate (PBT) Cable, 2m or 5m; M12 connector type; pigtail type GX-330M-A-P- 10mm 0 to 8mm 30x30mm 0.4kHz M30x60.3mm DC 3-wire type (Shielded type, long sensing range) Shielded type Type Long sensing range Threaded type Model No. (note 2) Rated sensing distance Normally Open GX-308MK-A-P- 2.0mm GX-312MK-A-P- 4.0mm GX-318MK-A-P- 8mm GX-330MK-A-P- 15mm Stable sensing distance (note 3) Standard sensing object (note 7) Hysteresis 0 to 1.6mm 8x8mm 0 to 3.2mm 0 to 6.4mm 12x12mm 18x18mm Max. 15% of measurement distance 0 to 12mm 30x30mm Supply voltage (note 4) 10-30V DC ±10% (note1) Current consumption Control output Communication specification max. 16mA PNP open-collector transistor, 200mA (note 2) IO-Link specification V1.1 Switching and communication line (C/Q) Baud rate Process data Transmission cycle time Response Frequency (note 5) 1.5kHZ COM3 (230.4kbit/s) PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE2_2) 0.4ms 1.kHz 0.5kHz 0.25kHz Protection IP67 (IEC) Ambient temperature Dimension (HxWxD) Material Connection method (note 6) M8x37.8mm -40 to +85°C M12x47.1mm M18x55.3mm Case: Nickel-plated brass [stainless steel (SUS303) for GX-308M(K)-], Sensing part: Polybutylene terephthalate (PBT) Cable, 2m or 5m; M12 connector type; pigtail type M30x60.3mm Notes: 1.) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23°C 2.) Suffix -P = PNP type 3.) The specified stable sensing distance is the range in which the sensor works reliably even in case of deviations in temperature or voltage 4.) When used at a power of 12 V, the product is less susceptible to the effects of internal self-heat generation and therefore a more stable repeat accuracy can be obtained 5.) The response frequency is an average value. 6.) Suffix -C5 = 5m cable / Suffix -J = Pigtail 0.3m with M12 connector / Suffix -Z = M12 connector type 7.) Standard sensing object = sheet steel, thickness: 1mm IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories IO-Link Sensors 10 IO-LINK SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories IO-Link Sensors DC 3-wire type (Non-shielded type) Type Model No. (note 2) Normally Open Rated sensing distance Stable sensing distance (note 3) Standard sensing object (note 7) Hysteresis Supply voltage (note 4) Current consumption Control output Communication specification Switching and communication line (C/Q) Baud rate Process data Transmission cycle time Response Frequency (note 5) Protection Ambient temperature Dimension (HxWxD) Material Connection method (note 6) GX-308ML-A-P- 2.0mm 0 to 1.6 mm 8x8mm 1kHZ M8x37.8mm Non-shielded type Threaded type GX-312ML-A-P- GX-318ML-A-P- 5.0mm 10mm 0 to 4 mm 0 to 8 mm 12x12mm 18x18mm Max. 10% of measurement distance 10-30V DC ±10% (note1) max. 16mA PNP open-collector transistor, 200mA (note 2) IO-Link specification V1.1 COM3 (230.4kbit/s) PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE2_2) 0.4ms 0.8kHz 0.4kHz IP67 (IEC) -40 to +85°C M12x47.1mm M18x55.3mm Case: Nickel-plated brass [stainless steel (SUS303) for GX-308ML(K)-], Sensing part: Polybutylene terephthalate (PBT) Cable, 2m or 5m; M12 connector type; pigtail type GX-330ML-A-P- 18mm 0 to 14.4 mm 30x30mm 0.1kHz M30x60.3mm Notes: 1.) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23°C 2.) Suffix -P = PNP type 3.) The specified stable sensing distance is the range in which the sensor works reliably even in case of deviations in temperature or voltage 4.) When used at a power of 12 V, the product is less susceptible to the effects of internal self-heat generation and therefore a more stable repeat accuracy can be obtained 5.) The response frequency is an average value. 6.) Suffix -C5 = 5m cable Suffix -J = Pigtail 0.3m with M12 connector Suffix -Z = M12 connector type 7.) Standard sensing object = sheet steel, thickness: 1mm DC 3-wire type (Non-shielded type, long sensing range) Type Model No. (note 2) Normally Open Rated sensing distance Stable sensing distance (note 3) Standard sensing object (note 7) Hysteresis Supply voltage (note 4) Current consumption Control output Communication specification Switching and communication line (C/Q) Baud rate Process data Transmission cycle time Response Frequency (note 5) Protection Ambient temperature Dimension (HxWxD) Material Connection method (note 6) GX-308MLK-A-P- 4mm 0 to 3.2 mm 12x12mm 1.5kHZ M8x37.8mm Non-shielded type Long sensing range Threaded type GX-312MLK-A-P- GX-318MLK-A-P- 8mm 16mm 0 to 6.4 mm 0 to 12.8 mm 24x24mm 48x48mm Max. 15% of measurement distance 10-30V DC ±10% (note1) max. 16mA PNP open-collector transistor, 200mA (note 2) IO-Link specification V1.1 COM3 (230.4kbit/s) PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE2_2) 0.4ms 1.kHz 0.5kHz IP67 (IEC) -40 to +85°C M12x47.1mm M18x55.3mm Case: Nickel-plated brass [stainless steel (SUS303) for GX-308M(K)-], Sensing part: Polybutylene terephthalate (PBT) Cable, 2m or 5m; M12 connector type; pigtail type GX-330MLK-A-P- 30mm 0 to 24 mm 90x90mm 0.25kHz M30x82.3mm Notes: 1.) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23°C 2.) Suffix -P = PNP type 3.) The specified stable sensing distance is the range in which the sensor works reliably even in case of deviations in temperature or voltage 4.) When used at a power of 12 V, the product is less susceptible to the effects of internal self-heat generation and therefore a more stable repeat accuracy can be obtained 5.) The response frequency is an average value. 6.) Suffix -C5 = 5m cable Suffix -J = Pigtail 0.3m with M12 connector Suffix -Z = M12 connector type 7.) Standard sensing object = sheet steel, thickness: 1mm Services that make a difference To ensure that our customers get the best out of our products and solutions we provide a complete package of services. Our experienced sales engineers, product specialists, product management and technical engineers consult on any new project and provide our customers with recommendations for the ideal products and solutions for each individual task. That is the reason why products and solutions of Panasonic Industry are considered highly reliable. Product & project consulting Feasibility studies Local laboratory tests Customizing Installation support Panasonic Academy Technical Support Warranty & claim handling Discontinuation consulting 12 PHOTOELECTRIC SENSORS / STANDARD SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors CX-400 A full lineup of world standard photoelectric sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Great lineup of 170 models The CX-400 series has a high level of basic functionality and excellent cost performance. Moreover, a wide number of variations means that there is sure to be a sensor that fits your needs. CX-400 Type CX-412q Thru-beam (long sensing range) CX-411q Thru-beam CX-493q Retroreflective (long sensing range) CX-491q Retroreflective (with polarizing filters) CX-482q Retroreflective (transparent object sensing) CX-481q Retroreflective (transparent object sensing) CX-422q Diffuse reflective (800mm type) CX-421q Diffuse reflective (300mm type) CX-424q Diffuse reflective (100mm type) CX-423q Diffuse reflective (narrow-view) CX-442q Adjustable range reflective CX-444q Adjustable range reflective CX-443q Adjustable range reflective CX-441q Adjustable range reflective (small spot) Sensing range 5m 3m 0.1 2m 50 500mm 800mm 300mm 100mm 70 200mm 20 300mm 15 100mm 2 50mm 2 50mm 15m 10m Less processing M8 plug-in connector type and M12 pigtailed type are available. This contributes to less time spent setting up. In addition, cable types are available with the following cable lengths: 0.5m, 2m, and 5m. M8 connector Elbow type Straight (2m / 5m) (2m / 5m) M12 connector cable Straight (2m / 5m) Cable type 5m 2m 0.5 m Less power consumed By relentlessly developing our technologies, we have been able to considerably reduce our sensors' power consumption. 60% Reduction Output Connecting method (note 1) NPN, PNP Cable type, M8 plug-in connector type, M12 pigtailed type Old CX-482 25mA New CX-482 10mA Cable length of cable type (note 2) 0.5m, 2m, 5m Notes: 1.) Only the cable type and M8 plug-in connector type are available for the adjustable range reflective type. 2.) Only the 2m cable length type (standard) is available for the adjustable range reflective type. Compact size The sensors are compact in size at 11.2x31x20mm (WxHxD). The mounting pitch is also at the world standard size of 25.4mm. 11.2mm 20mm 31mm 25.4mm Less resources used Based on environmental considerations, simplified packaging is used in order to reduce waste. In addition, the bag is made of polyethylene, which produces no toxic gases even when burned. 13 CX-41/42/49 Strong against oil and coolant liquids The lens material for the thru-beam type, retroreflective type (excluding the CX-48) and the diffuse reflective type is made of a strong acrylic that resists the harmful effects of coolants. These sensors can be used with confidence even around metal processing machinery that disperses oil mists. The protection mechanism also conforms to IP67 (IEC). Strong against ethanol CX-44/48 A strong, ethanol-resistant polycarbonate is used for the front and display covers. Safe even for installing near food processing machinery that disperses ethanol-based detergents. The protection mechanism also conforms to IP67 (IEC). Strong against interference The interference prevention function allows two sensors to be mounted close together. Typical applications Detecting cars on conveyor lines Detecting transparent bottles Detecting labels Detecting transparent glass bottles CX-423 CX-481 IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Thru-beam type CX-412 Strong infrared beam It realizes a 15m long-distance sensing range. Remarkable penetrating power enables applications such as package content detection. Retroreflective type CX-493 Strongest sensing range in its class A long 5m sensing range is possible with the red LED type that is easy to align with the beam axis. Can be used for wide automatic door shutters. Diffuse reflective type CX-423 CX-481/482 Beam axis alignment made easy These sensors realize a high luminance red LED spot that provides bright visibility enabling the sensing position to be checked at a glance. Because it has the small spot, approx. 2mm, even the minutest object can be accurately detected. Introducing the transparent object sensing type sensor Our unique optical system and transparent object sensing circuitry provide stable sensing of even thinner transparent objects than the conventional models. CX-440 CX-441/443 Can sense differences as small as 0.4mm, with hysteresis of max. 2% An advanced optical system provides sensing performance that is approx. 2.5 times more precise than conventional models. Even ultra small differences of 0.4mm can be detected accurately. CX-44 Not affected by color Both black and white objects can be sensed at almost the same distances. No adjuster control is needed, even when products of different colors are moving along the production line. CX-442 CX-483 BGS/FGS functions make even the most challenging settings possible! Background suppression BGS When object and background are separated. Foreground suppression FGS When object and background are close together. When the object is glossy or uneven. 0,4mm 2.5 times the sensing capability Height differences of as little as 0.4mm can be detected at a setting distance of 20mm. 30 % higher sensing capability 14 PHOTOELECTRIC SENSORS / STANDARD SENSORS IO-Link Technical specifications Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories CX-400 Type Model no. NPN output PNP output Sensing range Object to be sensed Hysteresis CX-411(-Z) (note 1) CX-411-P(-Z) Thru-beam Long sensing range CX-412(-Z) CX-413(-Z) CX-412-P(-Z) CX-413-P(-Z) With polarizing filter CX-491(-Z) Long sensing range CX-493(-Z) Retroreflective For transparent object sensing CX-481(-Z) CX-483(-Z) CX-482(-Z) CX-491-P(-Z) CX-493-P(-Z) CX-481-P(-Z) CX-483-P(-Z) CX-482-P(-Z) 10m 15m 30m Min. Ø 12mm (opaque) 3m (note 2) 5m (note 2) 50 to 500mm (note 2) 50 to 1.0m (note 2) 0.1 to 2m (note 2) Min. Ø 50mm (opaque, transparent) (note 2) Min. Ø 50mm (opaque, transparent or specular) (note 2) Supply voltage 12 to 24VDC ±10% Output Output operation Response time Max. 1ms PNP / NPN open-collector transistor, max. 100mA Switchable either Light-ON or Dark-ON Max. 2ms Max. 1ms Emitting element Automatic interference prevention function Red LED Two units of sensors can be mounted close together with interference prevention filters. (Sensing range: 5m) Infrared LED Red LED Infrared LED Incorporated (two sensor units can be mounted close together.) Protection IP67 (IEC) Ambient temperature 25 to +55°C Material Enclosure: PBT, Lens: Polycarbonate (CX-48p: Polycarbonate), Protection cover: Polycarbonate (CX-48p: Polycarbonate) Connection method 2m cable, Suffix - Z: M8 connector (note 3) Dimensions (HxWxD) 31x11.2x20mm (-Z connector type: 35.5x11.2x20mm) Accessories Notes: 1.) Suffix -Z = M8 connector type 2.) The sensing range is specified for the attached reflector RF-230 3.) Cable is not included in delivery. Please select under accessories (page 129) Reflector: RF-230 1 pc. 15 Type Model no. NPN output PNP output Sensing range Object to be sensed Hysteresis Supply voltage CX-424(-Z) (note 1) CX-424-P(-Z) 100mm Diffuse reflective CX-421(-Z) CX-421-P(-Z) CX-422(-Z) CX-422-P(-Z) 300mm 800mm Opaque, transparent Max. 15% of sensing range Narrow view CX-423(-Z) Adjustable range reflective (note 2) Small spot CX-441(-Z) CX-444(-Z) CX-442(-Z) CX-423-P(-Z) 70 to 300mm 12 to 24VDC ±10% CX-441-P(-Z) 2 to 50mm (adjustable range: 20-50mm) CX-444-P(-Z) 15 to100mm (adjustable range: 20-100mm) Max. 2% of sensing range CX-442-P(-Z) 20 to 300mm (adjustable range: 40-300mm) Max. 5% of sensing range Output Output operation Response time PNP / NPN open-collector transistor, max. 100mA Switchable either Light-ON or Dark-ON Max. 1ms Emitting element Automatic interference prevention function Protection Ambient temperature Material Infrared LED Red LED Red LED Incorporated (two sensor units can be mounted close together.) IP67 (IEC) 25 to +55°C Enclosure: PBT, Lens: Polycarbonate (CX-48p: Polycarbonate), Protection cover: Polycarbonate (CX-48p: Polycarbonate) Connection method 2m cable, Suffix - Z: M8 connector (note 3) Dimensions (HxWxD) 31x11.2x20mm (-Z connector type: 35.5x11.2x20mm) Notes: 1.) Suffix -Z = M8 connector type 2.) FGS = Foreground suppression BGS = Background suppression Selectable by wiring the inputs correspondingly 3.) Cable is not included in delivery. Please select under accessories (page 129) IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories CX-440 16 PHOTOELECTRIC SENSORS / STANDARD SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Multi-voltage 24 to 240VAC and 12 to 240VDC, suitable for supply voltages all over the world. Accessories NX5 High reliability The hermetically sealed output relay significantly increases its reliability. Hermetically sealed relay eliminates worries about bad contact NX5 Sensor usable world-wide Interference prevention Two sensors operate normally even when mounted close together (excluding the 30m thru-beam type sensor). Long sensing range Suitable for conveyor lines and parking lot applications. Thru-beam Retroreflective 10m (Red LED) 30m (Infrared LED) 5m (Red LED with polarizing filters) 7m (Infrared LED) Diffuse reflective 700mm (Infrared LED) Typical applications Multistoried parking Detects if the car is protruding from the elevator door. Golf driving range The sensor detects the presence of a golf ball. The sensor is multi-voltage type so no DC power supply is needed. NX5-M10RA Arresting shutter closing The long sensing range sensor with a visible red beam can be used to control the shutter operation at the gate of a factory. NX5-M10RA Arresting door closing The sensor detects a person or an object and prevents the door from closing as long as its beam is interrupted. 17 Technical specifications IO-Link Sensors Thru-beam Retroreflective Photoelectric Sensors Type Diffuse reflective Long sensing range With polarizing filters Long sensing range Fiber-optic Sensors Model no. NX5-M10RA NX5-M10RB NX5-M30A NX5-M30B NX5-PRVM5A NX5-PRVM5B NX5-RM7A NX5-RM7B NX5-D700A NX5-D700B Standard Fibers Sensing range Object to be sensed Hysteresis 10m 30m Min. Ø 20mm (opaque transparent) (note 3) 0.1 to 5m (note 1) 0.1 to 7m (note 1) 700mm (note 2) Min. Ø 50mm (opaque, semitransparent or transparent) (note 1, 3) Min. Ø 50mm (opaque or translucent) (note 1, 3) Opaque, semitransparent or transparent (note 3) -- Max. 15% of sensing range Fiber Sensors Communication Units Mark Sensors Laser Sensors Repeatability (perpendicular to sensing axis) Supply voltage Power consumption Output Max. 0.1mm Max. 0.2mm Max. 0.3mm 24 to 240VAC ± 10%, or 12 to 240VDC ± 10% Emitter: max. 1VA Receiver: max. 2VA Emitter: max. 1.5VA Receiver: max. 2VA Max. 2VA Relay contact 1c Switching capacity: Electrical life: Mechnical life: 250VAC 1A (resistive load) 30VDC 2A (resistive load) Min. 500000 switching operations (switching frequency 3600 operations/hour) Min. 100 million switching operations (switching frequency 36000 operations/hour) Output operation Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Response time Power indicator Sensitivity adjuster Automatic interference prevention function -- Continuously variable adjuster Use optional interference prevention filters Red LED (lights up when the power is ON) -- -- Max. 10ms -- NX5 Continuously variable adjuster -- Continuously variable adjuster Incorporated (two sensor units can be mounted close together.) Protection IP66 (IEC) Ambient temperature 20 to +55°C Emitting element Red LED Infrared LED Red LED Infrared LED Material Enclosure: Polycarbonate; lens: polycarbonate; cover: polycarbonate; front cover (retroreflective type sensor only): Acrylic Connection method 5-core (thru-beam type emitter: 2 cable) cable, 2m Dimensions (HxWxD) Accessories Adjusting screwdriver: 1 pc. 62x18x35mm -- Reflector RF-230: 1 pc. Adjusting screwdriver: 1 pc. Reflector RF-230: 1 pc. Adjusting screwdriver: 1 pc. Reflector cannot be placed in this range Sensor Actual sensing range of the 5m (NX5-RM7: 7m) sensor 0.1m Setting range of the reflector Reflector Reflector Notes: 1.) The sensing range and the object to be sensed of the retroreflective type sensor is specified for the RF-230 Further, the sensing range is the possible setting range for the reflector The sensor can also detect an object 0.1m, or more, away 2.) The sensing range is specified for white non-glossy paper (200x200mm) 3.) Check the functionality with a real object 18 PHOTOELECTRIC SENSORS / STANDARD SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors CY-100 Simple mounting with M18 thread Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Wide product range The availability of a wide range of models within the series means the CY-100 sensors can solve relatively complex tasks. Types with integrated polarization filters can even recognize reflective objects. The side view type makes applications possible in cramped spaces. CY-100 M18 Thread All models have an M18 male thread for easy and quick mounting. Furthermore the models are also available for the M12 connector type. You can easily replace and add these standard models. The nuts are included in delivery. Long sensing range The thru-beam and retroreflective types of the CY-100 have a large sensing range of up to 15m. Environmentally robust Thanks to the IP67 (IEC) casing, the sensor is suitable for installation in humid and dusty environments. Integrated status LEDs allow the operator to check the function of the sensor at a glance. Typical applications Object detection Detecting specular objects Object counting 19 Technical specifications Standard type Type Model no. Sensing range NPN output PNP output Object to be sensed Supply voltage Output Response time Emitting element Protection Ambient temperature Material Connection method Dimensions (HxWxD) Accessories Thru-beam Retroreflective type (note 3) Diffuse With polarizing filter With sensitivity adjuster Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON CY-111A (-Z) (note 1) CY-111B (-Z) CY-192A (-Z) CY-192B (-Z) CY-191A (-Z) CY-191B (-Z) CY-121A (-Z) CY-121B (-Z) CY-122A (-Z) CY-122B (-Z) CY-111A-P (-Z) CY-111B-P (-Z) CY-192A-P (-Z) CY-192B-P (-Z) CY-191A-P (-Z) CY-191B-P (-Z) CY-121A-P (-Z) CY-121B-P (-Z) CY-122A-P (-Z) CY-122B-P (-Z) 15m 4m 2m 100mm (note 2) 600mm (note 2) Min. Ø 18mm (opaque) Min. Ø 50mm Min. Ø 50mm (opaque, trans- (opaque, transparent) (note 1) parent or specular) (note 1) Opaque, transparent 12 to 24VDC ±10% PNP / NPN open-collector transistor, max. 100mA Max. 1ms Infrared LED Red LED Infrared LED IP67 (IEC) 25 to +55°C Enclosure: PBT, Lens: PMMA 2m cable, Suffix - Z: M12 connector (note 4) M18x46mm, -Z connector type: M18x60mm Nuts 4 pcs. M18 x 48mm, -Z connector type: M18x62mm Nuts 2 pcs. M18x46mm, -Z connector type: M18x60mm M18x62mm, -Z connector type: M18x76mm Nuts 2 pcs. Screwdriver 1pc. IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Side sensing type Thru-beam Retroreflective type (note 3) Diffuse Type With polarizing filter With sensitivity adjuster Model no. NPN output PNP output Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON CY-111VA(-Z) (note 1) CY-111VB(-Z) CY-192VA(-Z) CY-192VB(-Z) CY-191VA(-Z) CY-191VB(-Z) CY-121VA(-Z) CY-121VB(-Z) CY-122VA(-Z) CY-122VB(-Z) CY-111VA-P(-Z) CY-111VB-P(-Z) CY-192VA-P(-Z) CY-192VB-P(-Z) CY-191VA-P(-Z) CY-191VB-P(-Z) CY-121VA-P(-Z) CY-121VB-P(-Z) CY-122VA-P(-Z) CY-122VB-P(-Z) Sensing range Object to be sensed Supply voltage 15m Min. Ø 18mm (opaque) 4m Min. Ø 50mm (opaque, transparent) (note 1) 2m Min. Ø 50mm (opaque, transparent or specular) (note 1) 12 to 24VDC ±10% 100mm (note 2) 600mm (note 2) Opaque, transparent Output PNP / NPN open-collector transistor, max. 100mA Response time 1ms Emitting element Infrared LED Red LED Infrared LED Protection IP67 (IEC) Ambient temperature 25 to +55°C Material Enclosure: PBT, Lens: PMMA Connection method Dimensions (ØxD) Accessories 2m cable, Suffix - Z: M12 connector (note 4) M18x62mm, -Z connector type: M18x76mm M18x46mm, -Z connector type: M18x60mm Nuts 4 pcs. Nuts 2 pcs. Notes: Suffix -Z = M12 connector type 1.) The sensing range and object to be sensed of the retroreflective type are specified for the reflector RF-420 (accessories page 130) 2.) The sensing range is specified for white, matt paper 3.) The reflector is not included in delivery; please order separately (accessories page 130) 4.) Cable not included in delivery, please order separately (accessories page 129) M18x78mm, -Z connector type: M18x92mm Nuts 2 pcs. Screwdriver 1 pc. CY-100 20 PHOTOELECTRIC SENSORS / MINIATURE SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories EX-Z Smallest laser sensor with a built-in amplifier The extreme thinness of 3mm of the EX-Z series has been achieved by utilizing a new semiconductor packaging technology that does not use wire bonding. The small unit size allows the installation of sensors in a narrow space where only a conventional fiber sensor head could be installed before. As opposed to a fiber sensor, the EX-Z has a built-in amplifier, which also saves on installation space. EX-Z Miniature thru-beam sensor with built-in amplifier Front sensing Approx. 50% smaller than EX-10 EX-Z1F H14×W8×D3 mm Side sensing Approx. 35% smaller than EX-10 EX-Z1 H15.9×W5.5×D6.5 mm Sensing extremely small objects Thanks to the integrated slit mask, the sensor can detect objects with a diameter of as little as 0.3mm. Even at a distance of 500mm, the sensor is capable of reliably detecting objects as small as 1mm. Integrated slit mask EX-Z11 Slit diameter: 0.3mm Detecting the end of a thin tube Easy to install The clearly visible red light beam makes installation and beam alignment very simple. The 4-element LED provides a stable strong light over a long period of time. Great performance in an industrial environment With IP67 degree of protection, the EX-Z can be installed in environments where water is used or splashed1. For this type of application, there are rustproof mounting brackets available in stainless steel and plastic. 1 If water splashes on the sensor during sensing operation, the sensor may detect the water as an object Clearly visible spot 21 Detection of parts in parts feeder Detection of presence / absence of Detection of LED contacts test tubes Mounted on robot arm Technical specifications Standard type Type Model number Light-ON Dark-ON Sensing range Object to be sensed Supply voltage Output Response time Degree of protection Ambient temperature Connection method Dimensions (HxWxD) Accessories Note: Suffix P= PNP output No suffix = NPN type EX-Z11FA (-P) (note) EX-Z11FB (-P) 50mm Min. Ø 0.3mm Front sensing EX-Z12FA (-P) EX-Z12FB (-P) 200mm Min. Ø 0.5mm 14x8x3mm Thru-beam Side sensing EX-Z13FA (-P) EX-Z11A (-P) EX-Z12A (-P) EX-Z13FB (-P) EX-Z11B (-P) EX-Z12B (-P) 500mm 50mm 200mm Min. Ø 1.0mm Min. Ø 0.3mm Min. Ø 0.5mm 12 to 24V DC ±10% NPN / PNP open-collector transistor, max. 20mA Max. 0.5ms IP67 (IEC) -10 to +55°C 2m cable 15.5x5.5x6.5mm Mounting screws, 1 set EX-Z13A (-P) EX-Z13B (-P) 500mm Min. Ø 1.0mm IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories EX-Z 22 PHOTOELECTRIC SENSORS / MINIATURE SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors EX-10 The slimmest: 3.5mm thick Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Optimized precision optics The enhanced EX-10 series offers a more precise light beam compared with the other standard models. Now you can realize an even more space saving installation, because no additional tools like slit masks are needed to prevent interferences. It is no problem to detect smallest objects with a diameter of 0.5mm. 2-color indicator A convenient bright, 2-color indicator has been incorporated in the miniature body. You can check the available power supply and current output operation at a glance. EX-10 EX-11p / EX-11Ep EX-11Sp / EX-11SEp Sensing range 1m: EX-19 High-speed response time: 0.5ms The sensor EX-10 with a response time of only 0.5ms is especially suitable for detecting small and high-speed traveling objects. Flexible setup The EX-10 sensor is available as front sensing or side sensing type, allowing for flexible mounting in the narrowest of spaces. 2-colored status LEDs Orange: Operation Green: Stability Freely mountable fingertip size 3.5mm 10mm 14.5mm Freely mountable; dimensions 10x14.5x3.5mm (WxHxD) (Thrubeam type, front sensing). Moreover, easy alignment is possible with the visible red LED beam source. Typical applications 8 Detecting the float for a flow meter Seating confirmation fiber Detecting small parts such as screws Sensing PCB rack Amplifier built-in Ultra-slim photoelectric sensor EX-11B Amplifier built in Ultra-slim photoelectric sensor EX-14A FOUP EX-11EB EX-19SB 23 Technical specifications Type Model no. Sensing range Front sensing Side sensing Object to be sensed Supply voltage Output Output operation Response time Protection Ambient temperature Connection method Dimensions (HxWxD) Accessories Note: Suffix -PN = PNP type No suffix = NPN type EX-11A(-PN) (note) EX-11EA(-PN) EX-11B(-PN) EX-11EB(-PN) 150mm Min. Ø 1mm (opaque) Light-ON Dark-ON Thru-beam EX-13A(-PN) EX-13B(-PN) EX-19A(-PN) EX-19B(-PN) EX-13EA(-PN) EX-13EB(-PN) EX-19EA(-PN) EX-19EB(-PN) 500mm 1m Min. Ø 2mm (opaque) 12 to 24V DC ±10 % PNP/NPN open-collector transistor, max. 50mA Light-ON Dark-ON Light-ON Dark-ON Max. 0.5ms IP67 (IEC) 25 to +55°C 2m cable 14.5x10x3.5mm Mounting screws, 1 set Convergent reflective EX-14A(-PN) EX-14B(-PN) 2 to 25mm (conv. point: 10mm) Min. Ø 0.1mm copper wire (Setting distance: 10mm) Light-ON Dark-ON 13x14.5x3.5mm IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories EX-10 Narrow-view type Type Model no. Light-ON Dark-ON Sensing range Object to be sensed Supply voltage Output Response time Protection Ambient temperature Connection method Dimensions (HxWxD) Accessories Note: Suffix -PN = PNP type No suffix = NPN type Thru-beam Front sensing Side sensing Front sensing Side sensing EX-11SA(-PN) (note) EX-11SEA(-PN) EX-13SA(-PN) EX-13SEA(-PN) EX-11SB(-PN) EX-11SEB(-PN) EX-13SB(-PN) EX-13SEB(-PN) Min. Ø 0.5mm (opaque) 150mm Min. Ø 1.0mm (opaque) 500mm Min. Ø 1.0mm (opaque) 12 to 24V DC ±10% Min. Ø 2.0mm (opaque) PNP/NPN open-collector transistor, max. 50mA Max. 0.5ms IP67 (IEC) 25 to +55°C 2m cable 14.5x10x3.5mm Mounting screws, 1 set Front sensing EX-19SA(-PN) EX-19SB(-PN) 1m Min. Ø 2.0mm (opaque) 24 PHOTOELECTRIC SENSORS / MINIATURE SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Long sensing range The EX-20 series achieves long distance sensing [thru-beam type: 2m, retroreflective type: 200mm (when using the attached reflector), diffuse reflective type: 160mm], despite its miniature size. Hence, it is usable even on a wide conveyor. Clear beam spot using red LED dot light source EX-20 The emission area of a dot light source is smaller than that of a conventional LED flat light source. It is possible to design a high power, narrow beam. Since a red LED dot light source is used, the red beam spot is clearly visible even at a long distance so that the alignment and confirmation of the sensing position is easy. Less power consumed! By relentlessly developing our technologies, we have been able to considerably reduce our sensors' power consumption. EX-20 Miniature-sized and still mountable with M3 screws Sensing range: 80mm 5mm Sensing range: spot 1mm 10mm spot 35 % Reduction Typical applications Checking protrusion of wafer The ultra compact photoelectric sensor EX-23 has a sufficiently long sensing range of 2m. Further, its visible red LED beam makes beam alignment very easy. Detecting tape feeder cassette out of position Ultra compact in size with an ample sensing range of 2m, ideal for monitoring tape feeder cassettes that are out of position. Detecting fill-up of parts in feeder The sensor setting can be finely adjusted since a universal sensor mounting bracket is available, with which the height and the angle of the sensor can be freely adjusted. Position EX-23 incorrecte EX-23 EX-23 MS-EX20-5 25 Technical specifications Diffuse reflective type Thru-beam Retroreflective Type Standard type Diffuse beam Small spot beam Long distance spot beam Front sensing Side sensing Side sensing Side sensing Front sensing Side sensing Side sensing Model no. Light-ON Dark-ON Sensing range Object to be sensed EX-21A(-PN) (note) EX-21B(-PN) EX-23(-PN) Light-ON/ Dark-ON switchable EX-29A(-PN) EX-29B(-PN) EX-22A(-PN) EX-22B(-PN) EX-24A(-PN) EX-24B(-PN) EX-26A(-PN) EX-26B(-PN) EX-28A(-PN) EX-28B(-PN) 1m 2m 30 to 200mm 5 to 160mm 2 to 25mm 6 to 14mm (Conv. point: 10mm) (Conv. point: 10mm) 45 to 115mm Min. Ø 2.6mm (opaque) Min. Ø 3mm (opaque) Min. Ø 15mm opaque Opaque, translucent or translucent object or transparent object Min. Ø 0.1mm copper wire (Setting distance: 10mm) Opaque, translucent or transparent object IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Supply voltage Output Response time Protection Ambient temperature Connection method 12 to 24VDC ± 10% PNP / NPN open-collector transistor, max. 50mA Max. 0.5ms IP67 (IEC) 25 to +55°C Cable 2m Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Dimensions (HxWxD) Accessories Note: Suffix -PN = PNP type No suffix = NPN type 18x16x4.5mm 8.2x22x10.5mm 8.2x25x12.3mm Screwdriver, 1 pc. Reflector RF-200, 1 pc. Screwdriver, 1 pc. Screwdriver, 1 pc. 16x18x4.5mm 8.2x25x12.3mm 10x14.5x3.5mm Screwdriver, 1 pc. EX-20 26 PHOTOELECTRIC SENSORS / MINIATURE SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors EX-30 An alternative to fiber sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories An alternative to fiber sensors The EX-30 series can be screw-mounted (M4 for thru-beam type, M6 for reflective type). This means that they can be inserted into production lines in exactly the same way as conventional fiber sensors. 800mm thru-beam type available EX-30 The sensing range is 1.5 times greater than previous models! It also has a sensitivity adjuster to enable compatibility with a wide range of applications. Less power consumed! By relentlessly developing our technologies, we have been able to considerably reduce our sensors' power consumption. 35 % Reduction Typical applications Detecting quantity of labels in label magazine Detects the remaining amount of labels by the thickness of the roll. EX-31A Detecting ICs Detects whether ICs are accurately placed in IC trays. EX-31A Resin bottle detection The EX-32A threaded photoe lectric sensor confirms the arrival of bottles. Bottle detection Bottle discharge confirmation Bottle arrival confirmation FT-SFM2 EX-32A Bottle orientation discrimination Orientation switching apparatus 90deg turn Discharge 27 Technical specifications Model no. Type NPN output PNP output Sensing range Object to be sensed Supply voltage Output Output operation Response time Protection Ambient temperature Connection method Dimensions (HxWxD) Accessories EX-31A EX-31A-PN Light-ON Thru-beam EX-31B EX-33 EX-32A Diffuse reflective EX-32B EX-31B-PN EX-33-PN EX-32A-PN EX-32B-PN 500mm 800mm 50mm Min. 2mm (or opaque) Opaque, translucent or transparent object 12 to 24VDC ± 10% PNP / NPN open-collector transistor, max. 50mA Dark-ON Variable switching method Light-ON Dark-ON Max. 0.5ms IP67 (IEC) -25 to +55°C Cable 2m 14x15.6x18mm Nuts, 2 pcs.; washers, 2 pcs. Nut, 1 pc.; washer, 1 pc. IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories EX-30 28 PHOTOELECTRIC SENSORS / MINIATURE SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors PM-25/45/65 Enables equipment miniaturization and quick construction Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories PM-25/45/65 Increased beam emitting / receiving distance of 6mm The beam emitting and receiving sections are 0.5mm thinner compared to our conventional models although the external dimensions have not changed. 13.4 6 3.7 As a result, the distance between the beam-emitting and the beam-receiving point increased by 1mm. The wider distance means less possibility of collision with the object to be (Unit: mm) sensed. Large and easy-to-see operation indicator The large operation indicator (orange) lights up when an object enters the beam axis. The indicator is easy to see from any angle even from above and from the sides. Typical applications Positioning of a pallet Beam marks for easy adjustment There are marks on the front and back of the sensor to indicate the upper and the lower limit of the beam axis. This makes it easy to adjust the position of the object to be sensed. Three protection circuits standard on all models Ample beam emitting / receiving distance of 6mm 6mm Industry's first! IP64 rating Large and easy to see: Multi-angle operation indicator Compact size All models easy to mount with M3 screws Beam marks for easy adjustment Sensing the starting point on a rotating body Index Index Order guide Type Dimensions (mm) K type 6 23,9 12,3 Ultrasmall / Cable tyoe L type F type R type U type Type K type T type L type Y type F type R type 13,4 11,7 13,4 11,7 13,4 12 12 12,5 12,5 6 16 13,4 Dimensions (mm) 7 25,4 21,3 13,7 26 18,1 14,6 26 7 14,6 20,6 13,4 13 13,7 13,7 21,3 13 21,3 Compact / Cable type Model no. PM-K25 PM-K25-P PM-L25 PM-L25-P PM-F25 PM-F25-P PM-R25 PM-R25-P PM-U25 PM-U25-P Model no. PM-K45 PM-K45-P PM-T45 PM-T45-P PM-L45 PM-L45-P PM-Y45 PM-Y45-P PM-F45 PM-F45-P PM-R45 PM-R45-P Connector type Type K type T type L type Y type F type R type 29 Dimensions (mm) 7 26 22,4 26 22,4 13,7 22,4 16,7 26 26,2 13,4 14,9 15,7 14,9 22,7 13,5 22,4 13,4 13 13,4 13,5 13,4 22,4 22,4 13 22,4 13,4 Model no. PM-K65 PM-K65-P PM-T65 PM-T65-P PM-T65-W PM-T65W-P PM-L65 PM-L65-P PM-Y65 PM-Y65-P IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories PM-25/45/65 PM-F65 PM-F65-P PM-F65W PM-F65W-P PM-R65 PM-R65-P PM-R65W PM-R65W-P 30 PHOTOELECTRIC SENSORS / MINIATURE SENSORS IO-Link Technical specifications Sensors Photoelectric Sensors Fiber-optic Sensors Type Ultra small type Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Model no. (note 1) NPN output PNP output Fork width Object to be sensed Repeatability Supply voltage Output Output operation Response time Ambient temperature Protection PM-p25(-R) (note 2) PM-p25P Small type With cable PMp45 PMp45P 6mm (fix) 0.8 x 1.2mm (opaque) 0.01mm 5 to 24V DC ±10% PNP / NPN open-collector transistor, max. 50mA Incorporated with 2 outputs: Light-ON / Dark-ON Under light incident condition: max. 20s Under light interrupted condition: max. 80s (Response frequency: min. 3kHz) -25 to +55°C IP64 (IEC) PM-25/45/65 Emitting element Connection method Cable, 1m Notes: 1.) K = K type L = L type F = F type R = R type U = U type T = T type Y = Y type 2.) Suffic -R = bending-resistant cable 3.) Cable not included in delivery, please order separately (accessories, page 129) Infrared LED Built-in connector PM-p65 PM-p65P IP40 (IEC) Connector (note 3) 31 Features Stable detection by convergent reflective mode The stable detection characteristics of the PM2 series are obtained since it is a convergent reflective type and senses a limited area. Thus regardless of the background, stable detection is possible. Object to be sensed 30mm Background PM2 Convergent reflection sensing ensures stable detection IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Not affected by background Even a specular background does not affect the sensing performance if the sensor is located 30mm away from it (when directly opposite). Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Dark object detectable Since the sensor is very sensitive, it can detect even a dark object of low reflectivity. PM2 Object to be sensed A 0.05mm copper wire can be detected at a distance of 5mm. Typical applications Minute object detectable Starting point and overrun is sensed using the dog on the base Overrun sensing Dog Detecting capacitors in tray The convergent reflective type sensor reliably detects capacitors in a tray without being affected by their color, characters, marks or glossiness. PM2-LH10-C1 Overrun sensing Start point sensing 32 PHOTOELECTRIC SENSORS / MINIATURE SENSORS IO-Link Technical specifications Sensors Photoelectric Sensors Type Fiber-optic Sensors Standard Fibers Top sensing Fiber Sensors Communication Units Mark Sensors Laser Sensors Front sensing Connector type Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories L type (Top sensing) Top sensing Cable type Front sensing PM2 L type (Top sensing) Image Model no. PM2-LH10 PM2-LH10B PM2-LF10 PM2-LF10B PM2-LL10 PM2-LL10B PM2-LH10-C1 PM2-LH10B-C1 PM2-LF10-C1 PM2-LF10B-C1 PM2-LL10-C1 PM2-LL10B-C1 Type Model no. Light-ON Dark-ON Top sensing PM2-LH10 PM2-LH10B Connector type Front sensing PM2-LF10 PM2-LF10B L type (Top sensing) PM2-LL10 PM2-LL10B Top sensing PM2-LH10-C1 PM2-LH10B-C1 Cable type Front sensing PM2-LF10-C1 PM2-LF10B-C1 Sensing range 2.5 to 8mm (conv. point: 5mm) with white non-glossy paper (15x15mm) Object to be sensed Repeatability (perpendicular to sensing axis) Supply voltage Min. Ø 0.05mm copper wire (setting distance: 5mm) 0.08mm 5 to 24VDC ± 10% Output NPN open-collector transistor, max. 50mA Response time Max. 0.8ms Emitting element Infrared LED Connection method Connector for soldering (note) Note: Cable is not included in delivery. Please select under accessories (page 129) Cable, 1m L type (Top sensing) PM2-LL10-C1 PM2-LL10B-C1 PHOTOELECTRIC SENSORS / TRIGONOMETRIC SENSORS 33 EQ-500 Long range sensing capability up to 2.5m IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Features Impervious to variations in color or angle Due to its advanced optical system, the sensor is not affected by variations in the object's angle or gloss as compared to conventional sensors. Moreover, sensing can be performed at a somewhat constant distance even if the sensing object is black or white. Not affected by background objects Due to the 2-segment photodiode adjustable range system, the sensor does not detect objects outside the preset sensing field. It will not malfunction even if someone walks behind the sensing object, or machines or conveyors ar in the background. An easy-to-set adjuster with indicator Equipped with a 2-turn adjuster with indicator making it easy to set for short or long distances. EQ-500 series can function with 24 to 240V AC and 12 to 240V DC. Therefore, almost any power supply anywhere in the world will work. Equipped with BGS/FGS function We have added a DC-voltage type with NPN and PNP transistor outputs, all in one sensor. Its BGS/FGS function controls any background effects for more stable sensing. Convenient timer function models Types with an ON-delay/OFF-delay timer available. (EQ-5pT) > Operation: ON-delay OFF-delay > Timer period: 0.1 to 5s (individual setting possible) Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Little affected by contamination on lens Even if the lens surface gets somewhat dirty from dust particles, EQ-500 there is very little change in the operation field, rendering stable and consistent detection even for particles appearing close to the front surface of the unit. Convenient terminal block type Cabling is enabled by way of a terminal block. Distance adjuster (2-turn) ON delay timer adjuster Display OFF delay timer adjuster Terminal block Conduit connector 34 PHOTOELECTRIC SENSORS / TRIGONOMETRIC SENSORS IO-Link Technical specifications Sensors Photoelectric Sensors Fiber-optic Sensors Type Multi-voltage type With timer With timer DC-voltage With timer With timer Standard Fibers Model no. EQ-501 EQ-501T EQ-502 EQ-502T EQ-511 EQ-511T EQ-512 EQ-512T Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Sensing range Supply voltage Output Output operation Response time Timer periods Protection Ambient temperature 0.2 to 2.5m 0.2 to 1.0m 0.2 to 2.5m 0.2 to 1.0m 24 to 240VAC ±10%, or 12 to 240VDC ±10% 12 to 24VDC ±10% Relay contact 1a 3A/250VAC PNP / NPN open-collector transistor, max. 100mA Light-ON or Dark-ON Max. 20ms (for EQ-50pT dependent on the setting timer period) Max. 20ms (for EQ-51pT dependent on the setting timer period) Incorporated with Incorporated with Incorporated with Incorporated with variable variable variable variable ON-delay / ON-delay / ON-delay / ON-delay / OFF-delay timer OFF-delay timer OFF-delay timer OFF-delay timer (0.1 to 5s) (0.1 to 5s) (0.1 to 5s) (0.1 to 5s) IP67 (IEC) 20 to +55°C Accessories Emitting element Infrared LED EQ-500 Connection method Dimensions (HxWxD) Convenient terminal block 68x26x68mm Accessories Screwdriver, 1 pc. 35 Features Not affected by object color or background Long sensing range 2m Compact size The EQ-30 saves space since a miniaturized housing of 68x20x40mm (HxWxD) has been designed. Plug-in connector type The plug-in connector type (M12) of the EQ-30 series can be easily disconnected for replacement. Typical applications EQ-30 Unaffected by color or material, 2m distance adjustable fixed-focus sensing Technical specifications Type Diffuse Model no. NPN output PNP output EQ-34 (J) (note) EQ-34PN (J) Rated sensing distance 2.0m Sensing range 0.1-2m Detectable target Transparent and opaque material Hysteresis Max. 10% of measurement Response time Max. 2ms Supply voltage 10 to 30VDC ± 10% Output PNP / NPN open-collector transistor, max. 100mA Emitting element Rated current consumption without load Material Infrared LED NPN type: 50mA PNP type: 55mA Plastic Protection IP67 (IEC) Ambient temperature 20 to +55°C Connection method Cable 2m or M12 connector Dimensions (HxWxD) 68x20x40mm Accessories Note: Suffix J = M12 connector type Screwdriver, 1 pc. IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories EQ-30 Long distance sensing Object detection Color-independent detection 36 PHOTOELECTRIC SENSORS / AREA SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Letters, postcards can be detected Thin objects can be detected by using the cross-beam scanning system. Accessories NA1-11 Beam pitch: 10mm Object to be sensed size of ø13.5mm is realized by using a beam pitch of 10mm. Scanning Non-scanning Cross-beam scanning system 1 2 3 4 5 6 7 8 9 0 A Emitter 1 2 3 4 5 6 7 8 9 0 A Receiver NA1-11 Cross-beam scanning system to detect slim objects Long sensing range Though very slim, a wide sensing area of 1m length and 100mm width is realized. It is most suitable for object detection on a wide assembly line or for detecting the dropping of or incursion by small objects whose travel path is uncertain. Clearly visible large indicator A clearly visible large indicator having a 55mm width is incorporated on both the emitter and the receiver. 55mm Typical applications Detecting postcards NA1-11 can detect thin postcards due to its crossbeam scanning system. Detection of haphazardly falling objects NA1-11 PHOTOELECTRIC SENSORS / AREA SENSORS Technical specifications Type NPN PNP Model no. NA1-11 NA1-11-PN Sensing height 100mm Sensing range 0 to 1m (note) Beam pitch 10mm Numbers of beam channels 11 each on the emitter and the receiver, respectively Object to be sensed Min. ø 13.5mm (opaque) Supply voltage 12 to 24VDC ± 10% Output NPN open-collector transistor, max. 100mA PNP open-collector transistor, max. 100mA Ambient temperature 10 to +55°C Connection method Cable, 2m Dimensions (HxWxD) Note: Operating range for the receiver: 0.17 to 1m 140x30x10mm 37 IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories NA1-11 38 PHOTOELECTRIC SENSORS / AREA SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors 10mm thick: half the thickness of conventional models Space saving now possible; ultra-thin design does not obstruct picking operations. Accessories NA1-PK5/ NA1-PK3 Pick-to-light sensor Ultra-slim body Two unit installations are possible Sensor units can now be set to different light emission frequencies in order to prevent mutual interference. Two units can now be operated in a side-by-side configuration without interference for problem-free detection over wide areas. NA1-PK5/ NA1-PK3 Cable can be freely arranged in any position Lighting pattern selectable The job indicator operation can be selected as either continuous lighting or blinking. Selectable detection operation Sensor units can be set to detect the interruption of 1 beam channel or 2 or more beam channels. Continuous lighting Blinking Single beam interruption Double beam interruption Changeover Changeover All opaque bodies with ø35mm or greater will be detected. The accidental passage of small objects through the beam axis will not trigger detection, yet the operator's hands will always be accurately detected. This function is also useful when small objects regularly interrupt the beam axis. 39 Typical applications Cell production line Assembly line Technical specifications Type Model no. Sensing height Sensing range Beam pitch Number of beam channels Object to be sensed Supply voltage Output Connection method Dimensions (HxWxD) NPN PNP NA1-PK5 NA1-PK3 NA1-PK5-PN NA1-PK3-PN 100mm 49.2mm 100mm 49.2mm 0.1 to 1.2m 0.03 to 0.3m 0.1 to 1.2m 0.03 to 0.3m 25mm 24.6mm 25mm 24.6mm 5 beam channels 3 beam channels 5 beam channels 3 beam channels Min. ø 35mm (opaque) Min. ø 29mm (opaque) Min. ø 35mm (opaque) Min. ø 29mm (opaque) 12 to 24VDC ± 10% NPN open-collector transistor max.100mA PNP open-collector transistor max.100mA Cable, 2m 140x30x10mm 70x24x8mm 140x30x10mm 70x24x8mm IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories NA1-PK5/ NA1-PK3 40 FIBER-OPTIC SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors FX-100 Excellent price/performance ratio Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Easy to read The digital dual display allows you to check both the threshold value and incident light intensity at the same time. It also makes the procedures for setting the various values much easier. Multipurpose M8 connector type The connectors used are commercially available M8 connecFX-100 tors, so that processing costs and lead time required for carry- ing out processing can be greatly reduced. Designed in a 3-layer structure to accomodate basic through advanced settings Setting details are divided into three levels for clearer operation, so that settings for normal operation are made in 'RUN mode', basic settings are made in 'SET mode', and advanced functions are set in 'PRO mode'. This makes setting operations much easier to understand and carry out. Typical applications Wafer detection Detects wafer carrier cases through vacuum chamber´s view port. Wafer detection Sensing possible in corrosive environment. Lenses at the ends of the fiber heads expand the sensing range. Wafer carrier case Wafer Thru-beam type chemicalresistant fiber FT-L8Y 41 Detection of breaks / cracks of glass Detection over long ranges FV-SV2 FT-H30-M1V-S Detection of glass substrate in vacuum chamber Detection of glass substrate IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Technical specifications Standard type Long sensing range Type Connector type Cable type Connector type Cable type Model no. NPN output PNP output FX-101 (-Z) (note 2) FX-101P (-Z) (note 2) FX-101-CC2 FX-101P-CC2 FX-102 (-Z) (note 2) FX-102P (-Z) (note 2) FX-102-CC2 FX-102P-CC2 Supply voltage Power consumption Response time Output Response time 0: Response time 1: Response time 2: Response time 3: 12 to 24VDC ±10% Normal operation: max. 720mW (current consumption max. 30mA at 24V supply voltage) Eco mode: max. 600mW (current consumption max. 25mA at 24V supply voltage) max. 250µs max. 450µs max. 500µs max. 600µs Response time 1: Response time 2: Response time 3: Response time 4: max. 2.5ms max. 2.8ms max. 3.2ms max. 5.0ms PNP / NPN open-collector transistor, max. 100mA Output operation Selectable either Light-ON or Dark-ON Short-circuit protection Incorporated Sensitivity setting 2-level teaching/Limit teaching/Full-auto teaching Digital display Timer function Interference prevention Ambient temperature Emitting element 4 digit green + 4 digit red LCD display ON-delay /OFF-delay, switchable either effective or ineffective. [Timer period:1ms, 5ms, 10ms, 20ms, 40ms, 50ms, 100ms, 500ms, 1000ms] Incorporated Selectable response time method (note 1) (Functions at response time 1, 2 or 3) Incorporated Selectable response time method (note 1) (Functions at response time 1, 2, 3 or 4) 10 to +55°C (if 4 to 7 units are mounted close together: 10 to +50°C; if 8 to 16 units are mounted close together: -10 to +45°C (no dew condensation or icing allowed) Red LED Material Enclosure: polycarbonate; key switch: polycarbonate; fiber lock lever: PBT Connection method Small connector M8 connector (note 3) Cable, 2m Small connector M8 connector (note 3) Cable, 2m Dimensions (HxWxD) 32x9x66.4mm Accessories -- CN-14A-C2 (Connector attached cable: 2m): 1 pc. -- CN-14A-C2 (Connector attached cable: 2m): 1 pc. Notes: 1.) When using the interference prevention function, set the emission frequencies for the amplifiers to be covered by the interference prevention function to different frequency values. However, the interference prevention function does not operate at emission frequency 0 (factory default setting) for the FX-101(P)(-Z)/FX-101(P)-CC2 2.) Suffix -Z = M8 connector type 3.) The cable is not included in delivery. Please select under accessories (page 129) Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories FX-100 42 FIBER-OPTIC SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories FX-301(P) (red LED type) version upgrade We improved the standard model by enhancing its sensing stability and equipping it with handy functions such as the lightemitting amount selection function. Super high-speed response of 35µs The FX-301(P)-HS model is the digital type fiber sensor realizing FX-301 a super high-speed response of 35µs rendering it capable of sensing minute objects moving at high speeds. Stable sensing over long and short periods In addition to a four-chemical emitting element which suppresses changes in the light-emitting element over time so that a stable level of light emission can be maintained over long periods, a new APC (Auto Power Control) circuit has also been adopted. Because fluctuations over short periods of time have also been suppressed, stable sensing is possible very quickly once the power is turned back on after setup changes. FX-301 Enhanced functions - strong performance - easy to use Sensing range has been greatly increased All models use a double coupling lens that enables a much wider sensing range and maximization in the light emission efficiency. Sensing ranges with small diameter fibers and ultra small diameter fibers, which have become very popular due to the miniaturization of chip components, have been increased by 50% over previous values achieved with other amplifiers. FX-301 series double coupling lens Conventional fiber sensors (no lens) Light-emitting amount Stable sensing comparison Short-term stability Deviation FX-301(P)(-HS) Three-chemical emitting element Long-term stability Time 43 Typical applications Workpiece detection This standard type of FX-301(P)(-HS) using red light has a four-chemical emitting element for stable sensing over long periods. Sensing translucent stickers The blue LED type greatly reduces the damping rate, making it ideal for delicate sensing for yellow/red transitions. Object sensing during the painting process Due to a sensing range of 19.5m (FX-301 long range mode) and a 10m fiber length, it can be lead through rough environments freely. Engine block passage confirmation FD-WKZ1 has realized a sensing range of 480mm (FX-301 long range mode). In addition, due to its powerful beam, it can even work in adverse environments such as in areas prone to dust. Engine block Register mark detection The green LED type greatly reduces the damping rate, making it ideal for delicate sensing. Sensing film meandering Infrared LED type is ideal for sensing environments with light restrictions, such as places where lightsensitive film is being handled. IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Wire breakage detection Wide beams are ideal for moving wire detection. Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories FT-A11 FX-301 Technical specifications Type Standard type High speed Model no. NPN output PNP output FX-301( /-B/-G/-H) (note 1) FX-301( /-B/-G/-H)P FX-301-HS FX-301P-HS Supply voltage Response time Output 12 to 24VDC ±10% Max. 65µs H-SP (Red LED type only); max. 150µs (FAST); max. 250µs [STD/S-D (Red LED type only)]; max. 2ms (LONG) selectable with jog switch Max. 35µs (H-SP); max. 150µs (FAST); max. 250µs (STD/S-D); max. 2ms (LONG) selectable with jog switch PNP / NPN open-collector transistor, max. 100mA Output operation Sensitivity setting Digital display Automatic interference prevention function Ambient temperature Emitting element Connection method Selectable either Light-ON or Dark-ON, with jog switch 2-level teaching/Limit teaching/ Full-auto/ teaching 4-digit red LED display Incorporated (Up to 4 sets of fiber heads can be mounted close together.) (However, H-SP mode is 2 sets.) FX-301(P): Red LED, FX-301B(P): Blue LED, FX-301G(P): Green LED, FX-301H(P): Infrared LED 10 to +55°C Connector (note 2) Red LED Dimensions (HxWxD) 30.5x10x64.5mm Accessories FX-MB1 Amplifier protection seal Notes: 1.) Without suffix = Red LED Suffix-B = Blue LED Suffix-G = Green LED Suffix-H = Infrared LED 2.) The cable for amplifier connection is not supplied as an accessory. Please select under accessories (page 129) 44 FIBER-OPTIC SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors FX-311 Remarkably easy to use Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories 12-turn potentiometer with visible indicator 12-turn potentiometer has been incorporated for fine adjustments. It enables very fine differences to be detected. Since the potentiometer is illuminated, you can even make adjustments easily in dark areas. Three light source types (red, green, blue) are made FX-311 available for expanding applications Rapid blinking `assist function' eases adjustment for optimum sensitivity. Typical applications Detecting transparent PET bottles The green LED type is ideal for stably sensing objects such as transparent bottles which yield only small amounts of light fluctuation. Register mark detection The blue LED type can accurately sense yellow marks on white backgrounds that are difficult to sense using the red LED type. FX-311G Technical specifications Model no. NPN output PNP output FX-311 FX-311P Supply voltage 12 to 24VDC ±10% Power consumption Max. 840mW (Current consumption max. 35mA at 24V supply voltage) Response time Max. 250µs (STD / S-D), max. 2ms (LONG) selectable with selection switch Output PNP / NPN open-collector transistor, max. 100mA Output operation Selectable either Light-ON or Dark-ON, with selection switch Short-circuit protection Incorporated Operation of indicators Orange LED (lights up when the output is ON) Timer function Automatic interference prevention function Ambient temperature Emitting element Incorporated with OFF-delay timer, selectable either effective (approx. 10ms or 40ms) or ineffective Incorporated (Up to 4 sets of fiber heads can be mounted closely.) (note 1) 10 to +55°C (if 4 to 7 units are mounted close together: 10 to +50°C; if 8 to 16 units are mounted close together: 10 to +45°C (no dew condensation or icing allowed) Red LED Material Enclosure: Heat-resistant ABS, Case cover: polycarbonate Connection method Connector (note 2) Dimensions (HxWxD) 34.5x10x70.5mm Notes: 1.) When the power supply is switched on, the light emission timing is automatically set for interference prevention 2.) The cable for amplifier connection is not supplied as an accessory. Please select under accessories (page 129) 45 Features Optimized stability When used with the super quality fiber as a set, the incident light intensity variation among units is decreased to only 1/4 of that of conventional models. High performance The FX-500 with its ultra high response time improves of 25s productivity. Super quality fiber FX-500 series Threshold Incident light value intensity Digital control is essentially achieved Stability of the incident light intensity is by 4 times improved. Values stay close together even after replacing an amplifier. FX-500/550 Fiber amplifier at the industry's leading edge IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors HYPER mode incorporated FX-500 in combination with the small diameter fiber can handle challenging detections over a super long sensing range. Safety Sensors Improved accuracy! FX-500 with its accurate detection catches fractional difference in light intensity, fulfilling high precision and low-hysteresis applications. Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories FX-500 Previous model Max. 5.6 times! FX-500/550 FT-A11 No PLC necessary, saving material and programming costs Logical operation of sensors Detection fiber Three logical calculations (AND/OR/ XOR) are selectable using Output 1 of multiple FX-500 series amplifiers. You can logically connect two outputs of an FX-500 or one input of a normal sensor to the output of an FX-500 sensor. Synchronization fiber Analog output cable type FX-505 The sensor outputs an analog signal of 4-20mA in proportion to digital value displayed for the current light intensity received. Edge tracking of film or sheet Actual position Deviation 20 Calculation of 2 neighboring FX-500 amplifiers Communication direction Upper side Output 1 Calculation result output Lower side Output 2 Normal operation Calculation of two outputs in one FX-500 FX-502(P) / 505(P)-C2 Output 1 Calculation result output Output 2 Normal operation Calculation of one FX-500 and external input FX-502(P) / 505(P)-C2 External input setting (sensor, contact, PLC, etc.) Output 1 Calculation result output Direct settings Direct adjustment: Threshold values can be changed directly in RUN mode. Direct adjustment Direct teaching: Teaching can be done in RUN mode. Just press the SET button once for object "present" and "not present". Direct teaching Output current (mA) 4 0 Light intensity 4,000/8,000 Drifting path can be tracked as the light intensity changes. 46 FIBER-OPTIC SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Typical applications Counting of IC pins FT-H20W-M1 Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Glass substrate sensing Ionizers/ Electrostatic Sensors Accessories FX-500/550 Check crimping Technical specifications Type Connector Cable Model no. NPN output PNP output FX-501 FX-501P FX-502 FX-502P FX-551 FX-551P FX-551-C2 FX-551P-C2 FX-505-C2 FX-505P-C2 Digital fiber sensor amplifier Digital Analog Timer function Adjustable: 0.1ms to 999.9ms in 0.1ms steps, 1 to 9999ms in 1ms steps, 1 to 32s in 1s steps Interference prevention Response time Analog voltage output Auto interference prevention function for up to 12 units and selectable emission frequency method Max. 25s/60s/250s/2ms/4ms/24ms Incorporated (up to 4 units) Max. 60µs/ 250µs /2ms /4ms /24ms Auto interference prevention function for up to 12 units and selectable emission frequency method Max. 25s/60s/250s/ 2ms/4ms/24ms 4 to 20mA Supply voltage 12 to 24VDC ±10% Output PNP / NPN open-collector transistor, max. 100mA Emitting element Red LED Material Rated current consumption (without load) Protection Enclosure: polycarbonate, switch: POM Normal operation: max. 40mA at 24V supply voltage Eco mode: max. 30mA at 24V supply voltage IP40 (IEC) Ambient temperature 10 to +55°C Connection method Connector type (note) Cable, 2m Dimensions (HxWxD) 34x10x75mm Accessories FX-MB1 Amplifier protection seal Note: The cable for amplifier FX-501p, FX-502p, FX-551p is not supplied as an accessory. Please select under accessories (page 129). FX-MB1 Amplifier protection seal Fiber-optic Sensors Now with communication interface! 48 STANDARD FIBERS IO-Link Fibers with integrated high-precision plug Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Stable light intensity Optical fibers with insertion plug-in achieve a very high quality standard. Through the integrated high-precision plug, the fiber core can be centered to within ±40µm. Variation in light intensity could thus be reduced to ±10%. New fiber core Now the core consists of only one fiber instead of several single fibers. This design improves sensing stability dramatically because there is no variation in light intensity among individual fibers. Measurement Sensors New Old Ionizers/ Electrostatic Sensors Accessories Sharp bending and flexible fibers With a bending radius of 4mm, the optical fibers easily cope with millions of bending cycles. Fibers with integrated high- precision plug 49 Thru-beam type (one pair set) Type Shape of fiber head (mm) Model no. M3 M3 12 Tough FT-30 Bending radius R2 Sensing range (mm) Fiber cable length FX-500 series U-LG LONG FAST H-SP STD 810 400 650 HYPR 210 1350 75 Threaded M4 ø1.5 M4 15 ø1.5 10 ø3 10 Tough FT-40 Tough FT-S20 Tough FT-S30 STD R4 HYPR 1200 2m (note) 3600 STD R2 400 HYPR 1350 STD R4 HYPR 1200 (note) 3600 2200 1700 530 190 810 650 210 75 2200 1700 30 190 Cylindrical ø3 Note: The length of the fiber cable affects the sensing range. Reflective type Threaded Type Shape of fiber head (mm) Model no. Bending Fiber cable radius length Sensing range (mm) (note) FX-500 series U-LG LONG FAST H-SP M3 M4 M3 12 M4 14 M6 17 ø3 10 Tough FD-30 STD 330 R2 Tough 160 HYPR 600 250 80 25 FD-40 2m Tough STD 900 FD-60 520 740 HYPR 260 1550 90 R4 Tough STD 330 FD-S30 160 250 HYPR 80 600 25 M6 ø3 Cylindrical Note: The sensing range is specified for white, matt paper. Tough High flexibility: min. bending radius of 4mm, 10 mio. bending cycles (@ radius 10mm) FX-101 FX-102 135 400 320 870 135 400 320 870 FX-101 FX-102 Beam axis dia. (mm) Protection Ambient temperature ø0.5 ø1 IP67 (IEC) 55 to +80°C ø0.5 ø1 Protection Ambient temperature IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories 45 155 IP67 (IEC) 140 420 45 155 55 to +80°C Fibers with integrated highprecision plug 50 STANDARD FIBERS IO-Link Sensors Photoelectric Sensors Threaded fibers Thru-beam type (one pair set) Fiber-optic Sensors Standard Fibers Type Shape of fiber head (mm) Model no. Bending Fiber cable radius length Sensing range (mm) (note 1) FX-500 series U-LG LONG FAST H-SP Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Threaded M14 M4 M4 M3 Elbow M3 12 Tough FT-31 Lens mountable: FX-LE1, FX-LE2, FX-SV1 M4 15 Lens mountable: FX-LE1, FX-LE2, 15 M4 Lens mountable: FX-LE1, FX-LE2, FX-SV1 M4 W7 × H9 × D13.5 With expansion lens M14 40 FT-43 Tough FT-R40 FT-R43 Tough FT-140 STD R2 315 HYPR 1350 STD R4 HYPR 1400 (note 2) 3600 2m STD R4 930 HYPR (note 2) 3600 STD R4 720 HYPR 3000 R4 10m STD (note 2) HYPR (note 2) 19600 19600 770 550 210 70 2800 2100 770 240 1750 1500 500 160 1600 1100 430 130 19600 (note 2) 19600 (note 2) 16000 6300 Long sensing range Square head Threaded fibers Notes: 1.) The sensing range of the free-cut type fiber may be reduced depending upon how the fiber is cut 2.) The length of the fiber cable affects the sensing range Tough High flexibility: min. bending radius of 4mm, 10 mio. bending cycles (@ radius 10mm) Reflective type Type Shape of fiber head (mm) Model no. M3 Ultra-small diameter M3 12 Coaxial · Lens mountable: FX-MR3, FX-MR6 M3 17 Lens mountable: FX-MR3, FX-MR6, Coaxial M3 16 M4 14 Lens mountable: FX-MR1, FX-MR2, FX-MR3, FX-MR5, FX-MR6, Coaxial M4 Tough FD-31 Tough FD-32G FD-EG30 Tough FD-41 Tough FD-42G 25 M6 17 Coaxial M6 17 15 M6 Tough FD-61 Tough FD-61G Tough FD-R60 M6 Elbow Bending radius R2 Fiber cable length Sensing range (mm) (note 1, 2) FX-500 series U-LG LONG FAST H-SP STD 290 125 220 HYPR 80 515 25 2m STD 380 R2 200 HYPR 270 95 650 27 STD 130 R4 500mm 48 HYPR 110 30 170 9 STD 290 R2 125 HYPR 220 80 515 25 STD 380 R2 200 HYPR 270 95 650 27 2m STD 840 R4 450 HYPR 670 200 1400 70 STD 800 R4 420 HYPR 650 200 1100 60 STD 600 R4 290 2m HYPR 550 190 1100 65 Threaded M4 Notes: 1.) The sensing range of the free-cut type fiber may be reduced depending upon how the fiber is cut 2.) The sensing range is specified for white, matt paper Tough High flexibility: min. bending radius of 4mm, 10 mio. bending cycles (@ radius 10mm) FX-101 Beam axis dia. (mm) Protection FX-102 Ambient temperature 130 340 ø0.5 350 970 ø1.5 55 to +80°C 270 740 IP67 (IEC) ø1 210 640 14000 19600 ø10 (note 2) 40 to +70°C FX-101 FX-102 Protection Ambient temperature 35 140 IP67 (IEC) 70 190 IP40 (IEC) 20 70 55 to +80°C 40 to +70°C 35 140 IP67 (IEC) 70 190 IP40 (IEC) 120 410 IP67 (IEC) 120 350 IP40 (IEC) 110 240 IP67 (IEC) 55 to +80°C 51 Square head fibers Thru-beam type (one pair set) Type Shape of fiber head (mm) Model no. M3 M3 W5.5xH8xD16 M4 W7xH9xD13.9 Tough FT-R31 FT-R41W With lens M4 W7xH9xD14.4 Lens mountable: FX-LE1/FX-LE2/FX-SV1 M4 W7xH9xD13.5 FT-R42W Tough FT-R43 M4 Square head Bending radius R2 R1 Fiber cable length Sensing range (mm) (note 1) FX-500 series U-LG LONG FAST H-SP STD 580 270 440 HYPR 160 1000 55 STD 800 HYPR 3200 1800 1400 460 150 STD HYPR (note 2) 2200 3600 3600 (note 2) 3500 1300 460 2m STD 720 HYPR 3000 1600 1100 430 130 Cable protection Usable with lens Tough FT-R44Y R4 W7xH9.5xD15.5 Full protection Tough FT-R60Y W10xH11xD21.2 STD 720 HYPR 3000 STD HYPR (note 2) 2100 3600 M6 Notes: 1.) The sensing range of the free-cut type fiber may be reduced by 20% depending upon how the fiber is cut 2.) The length of the fiber cable affects the sensing range 3.) The fiber cable is oil-resistant 1600 1100 430 130 3600 (note 2) 3600 (note 2) 1260 400 FX-101 FX-102 100 340 250 710 510 2000 210 640 210 640 690 1890 Beam axis ø (mm) Protection Ambient temperature ø0.5 IP67 (IEC) 55 to +80°C IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors ø1 ø2.2 ø1 ø1 IP40 (IEC) 40 to +60°C Laser Sensors Safety Sensors IP67 (IEC) 55 to +80°C IP67 (IEC) (note 3) 55 to +80°C Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories ø3.5 IP68G 55 to +80°C Square head fibers Reflective type Type Shape of fiber head (mm) Model no. Coaxial, lens mountable M3 W5.5×H8×D16 Coaxial, lens mountable M3 W5.5×H8×D16 Coaxial, lens mountable M3 W5.5×H8×D16 Coaxial, lens mountable M3 W5.5×H8×D16 Tough FD-R31G FD-R32EG FT-R34EG FD-R33EG Bending radius R2 Fiber cable length Sensing range (mm) (note 1, 2) FX-500 series U-LG LONG FAST H-SP STD 310 170 260 2m HYPR 85 530 27 STD 110 45 92 HYPR 30 170 9 STD 90 R4 500mm 38 HYPR 70 23 130 7 STD 44 19 33 HYPR 11 84 3 Square head M3 M4 M4 Tough STD 430 FD-R41 R2 210 HYPR 320 100 W7×H9×D13.5 710 34 M6 Cable protection Tough 2m TD 610 FD-R61Y R4 280 HYPR 435 160 W10xH11xD15.5 990 50 Notes: 1.) The sensing range of the free-cut type fiber may be reduced by 20% depending upon how the fiber is cut 2.) The length of the fiber cable affects the sensing range 3.) The fiber cable is oil-resistant Tough High flexibility: min. bending radius of 4mm, 10 mio. bending cycles (@ radius 10mm) FX-101 FX-102 45 150 20 68 17 60 7 22 60 170 85 185 Beam axis ø (mm) Degree of protection Ambient temperature Emitter ø0.5 55 to +80°C Emitter ø0.25 Emitter ø0.175 IP40 40 to +70°C Emitter ø0.125 20 to +60°C ø0.75 IP67 IP67 (note 3) 55 to +80°C 52 STANDARD FIBERS IO-Link Sensors Photoelectric Sensors Cylindrical fibers Thru-beam type (one pair set) Fiber-optic Sensors Standard Fibers Type Shape of fiber head (mm) Model no. Fiber Sensors Communication Units Mark Sensors Laser Sensors ø1 ø1 6 ø 1.5 10 Tough FT-S11 Tough FT-S21 ø1.5 Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Cylindrical fibers Cylinder Ultra-small diameter ø3 ø2.5 ø3 ø 1.5 10 With lens, long sensing range ø2.5 8 ø3 10 ø0.25 ø3 5 15 ø0.4 ø3 5 15 FT-S21W FT-S32 FT-S31W Tough FT-E13 Tough FT-E23 Bending radius R2 R1 R10 R1 R2 Fiber cable length 500mm 2m 1m Sensing range (mm) (note 1) FX-500 series U-LG LONG FAST H-SP STD 90 HYPR 350 STD 315 HYPR 1350 STD 260 HYPR 990 STD HYPR (note 2) 3100 3600 STD 800 HYPR STD 15 HYPR 52 3300 210 160 60 19 770 550 210 70 590 440 150 53 3600 (note 2) 3600 (note 2) 1800 600 1900 1400 490 160 30 24 8 2 STD 160 75 125 HYPR 42 270 13 Side sensing ø4 ø4 3 25 Tough FT-V40 STD R4 2m HYPR 3500 (note 2) 3600 Notes: 1.) The sensing range of the free-cut type fiber may be reduced depending upon how the fiber is cut 2.) The length of the fiber cable affects the sensing range 3600 (note 2) 3600 (note 2) 2400 850 Reflective type FX-101 FX-102 40 90 130 340 80 240 1100 3000 260 720 6 19 22 80 1000 3100 Beam axis dia. (mm) Protection Ambient temperature ø0.25 ø0.5 IP67 (IEC) 55 to +80°C 40 to +60°C ø2 IP40 (IEC) 40 to +70°C ø1 40 to +60°C ø0.125 ø0.25 IP67 (IEC) 40 to +70°C ø2.5 IP50 (IEC) 40 to +60°C Sensing range (mm) (note 1, 2) Type Shape of fiber head (mm) Model no. Bending radius Fiber cable length FX-500 series U-LG LONG FAST H-SP ø1.5 ø3 Cylindrical ø 1.5 Tough STD 130 10 FD-S21 R2 1m 80 HYPR 190 110 37 11 ø3 15 Tough FD-S32 R4 STD 790 420 660 HYPR 220 1200 75 ø3 15 FD-S32W R1 STD 630 270 430 HYPR 150 900 45 ø3 Tough STD 290 10 FD-S31 R2 125 2m HYPR 220 80 515 25 Coaxial ø3 15 STD 340 FD-S33GW R1 150 HYPR 280 90 670 25 Metal-free NEW Tough STD 590 16 FD-S60Y R4 320 HYPR 420 200 600 75 ø1.5 ø 0.48 15 3 FD-E13 STD 29 12 25 HYPR 7 50 2 ø3 ø 0.63 15 5 FD-E23 R4 1m STD 55 HYPR 170 120 80 30 9 ø5,5 ø1.5 Ultra-small diameter Oil-resistant ø3 Notes: 1.) The sensing range of the free-cut type fiber may be reduced depending upon how the fiber is cut 2.) The sensing range is specified for white, matt paper FX-101 FX-102 Protection 25 70 IP40 (IEC) 120 345 80 230 IP67 (IEC) 35 140 45 140 IP40 (IEC) 140 300 IP68G 5 15 IP40 (IEC) 20 70 Ambient temperature 55 to +80°C 40 to +60°C 55 to +80°C 40 to +60°C 40 to +70°C 40 to +60°C 53 Fibers with sleeve Thru-beam type (one pair set) Type Shape of fiber head (mm) Model no. M3 Sleeve 40mm M3 ø 0.88 10 Sleeve 40mm M4 ø1.48 12 Tough FT-31S Tough FT-42S M4 Bending radius R2 R4 (note 3) Fiber cable length Sensing range (mm) (note 1, 2) FX-500 series U-LG LONG FAST H-SP STD 740 315 550 HYPR 195 1220 63 2m STD 1130 HYPR (note 2) 3600 2050 1600 530 190 Ultra-small Tough STD 160 ø 0.4 ø3 5 15 FT-E23 R2 75 1m HYPR 270 125 42 13 Threaded ø1 ø2 1,1 20 15 Tough FT-V23 STD R4 450 2m HYPR 1800 1000 880 280 90 ø2 Side sensing ø1 ø2 Tough STD 550 1 FT-V25 R2 240 HYPR 480 140 15 15 900 45 ø2.5 ø1,5 ø2,5 1,3 20 15 Tough FT-V30 R4 STD 680 HYPR 2200 Notes: 1.) The sensing range of the free-cut type fiber may be reduced depending upon how the fiber is cut 2.) The length of the fiber cable affects the sensing range 3.) The bending radius of the sleeve is min. 10mm Tough High flexibility: min. bending radius of 4mm, 10 mio. bending cycles (@ radius 10mm) 1200 1000 340 100 FX-101 FX-102 Beam axis dia. (mm) Protection 130 340 ø0.5 300 800 ø1 IP67 (IEC) 22 80 ø0.25 160 400 ø0.75 95 260 ø0.5 IP30 (IEC) 180 480 ø1.0 Ambient temperature 55 to +80°C 40 to +70°C 55 to +80°C IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Fibers with sleeve Reflective type Threaded M4 Ultra-small diameter Type Shape of fiber head (mm) Model no. Ultra-small diameter M3 Sleeve 15mm M3 ø0.8 15 Sleeve 40mm M4 ø1.48 12 Sleeve 40mm M6 15 ø 2.5 ø1.5 ø 0.48 15 3 FD-EG30S Tough FD-41S Tough FD-61S FD-E13 M6 ø1.5 Bending radius R4 R2 (note 3) R4 (note 3) R4 Fiber cable length Sensing range (mm) (note 1, 2) FX-500 series U-LG LONG FAST H-SP STD 110 1m 50 HYPR 80 30 170 9 STD 290 125 220 HYPR 80 515 25 2m STD 790 420 660 HYPR 220 1200 75 STD 29 1m 12 HYPR 25 7 50 2 ø3 Cylindrical Side sensing 15 15 Tough ø3 ø1.5 2 FD-V30 R2 STD 65 2559 HYPR 130 120 35 240 14 15 20 Tough 2m STD 220 ø5 ø2 2,3 FD-V50 R4 120 HYPR 210 75 370 25 ø5 Notes: 1.) The sensing range of the free-cut type fiber may be reduced depending upon how the fiber is cut 2.) The sensing range is specified for white, matt paper 3.) The bending radius of the sleeve is min. 10mm Tough High flexibility: min. bending radius of 4mm, 10 mio. bending cycles (@ radius 10mm) FX-101 FX-102 Protection Ambient temperature 20 70 IP40 (IEC) 40 to +70°C 35 140 IP67 (IEC) 55 to +80°C 130 360 5 15 IP40 (IEC) 40 to +60°C 25 75 IP30 (IEC) 55 to +80°C 40 100 54 STANDARD FIBERS IO-Link Sensors Photoelectric Sensors Flat fibers Thru-beam type (one pair set) Fiber-optic Sensors Standard Fibers Type Shape of fiber head (mm) Model no. Fiber Sensors Communication Units Mark Sensors Top sensing W3 × H8 × D12 Tough FT-Z30H Laser Sensors Top sensing W3 × H8 × D12 FT-Z30HW Bending Fiber cable radius length Sensing range (mm) (note 1) FX-500 series U-LG LONG FAST H-SP R2 STD 3600 (note 2) 3500 3600 (note 2) HYPR 2600 R1 (note 2) 3600 810 Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Flat fibers Side sensing W3 × H12 × D8 Tough FT-Z30E R2 STD HYPR (note 2) 3.500 3600 Flat With boss Side sensing W3 × H12 × D8 FT-Z30EW R1 Front sensing W8.5 × H12 × D3 Tough FT-Z30 R2 Front sensing W8,5 × H12 × D3 FT-Z30W Front sensing W10 × H7 × D2 FT-Z20W Top sensing W2 × H10 × D10 FT-Z20HBW R1 Front sensing W14 × H7 × D3.5 FT-Z40W Top sensing W3.5 × H14 × D11 FT-Z40HBW 2m STD 3400 HYPR (note 2) 9600 STD HYPR (note 2) 2100 3600 STD HYPR (note 2) 1500 3600 STD 530 HYPR (note 2) 1600 1m STD 260 HYPR 1100 STD HYPR 1400 3500 2m STD 800 HYPR 3300 Notes: 1.) The sensing range of the free-cut type fiber may be reduced depending upon how the fiber is cut 2.) The length of the fiber cable affects the sensing range 3600 (note 2) 3600 (note 2) 2400 740 3600 (note 2) 3600 (note 2) 2000 630 3600 (note 2) 3600 (note 2) 1200 410 3300 3200 1000 280 1100 900 330 100 670 570 180 55 3300 2300 890 290 1900 1400 490 160 Reflective type FX-101 FX-102 Beam axis dia. (mm) Protection Ambient temperature 1.400 3200 1200 3200 1400 2600 2×3 IP40 (IEC) 710 2300 ø2 540 1800 40 to +60°C 230 670 ø1.5 100 320 ø0.5 IP67 (IEC) 330 1000 ø1.5 260 720 ø1 IP67 (IEC) Type Shape of fiber head (mm) Model no. Front sensing W10 × H7 × D2 Top sensing W2 × H10 × D10 Front sensing W14 × H7 × D3.5 Top sensing W3.5 × H14 × D11 FD-Z20W FD-Z20HBW FD-Z40W FD-Z40HBW Bending radius Fiber cable length Sensing range (mm) (note 1, 2) FX-500 series U-LG LONG FAST H-SP STD 2 to 65 HYPR 1 to 230 1 to 110 1 to 85 3 to 35 5 to 13 1m STD 2 to 85 HYPR R1 1 to 340 STD 110 HYPR 430 2m STD 260 HYPR 760 1 to 210 1 to 180 2 to 55 3 to 15 230 180 1.5 to 65 3 to 25 540 470 1 to 160 2 to 50 FX-101 Fx-102 2 to 20 1 to 70 Protection Ambient temperature 2 to 30 1 to 90 1 to 55 160 IP67 (IEC) 40 to +60°C 1 to 90 0.5 to 240 IP67 (IEC) Flat With boss Notes: 1.) The sensing range of the free-cut type fiber may be reduced depending upon how the fiber is cut 2.) The sensing range is specified for white, matt paper Tough High flexibility: min. bending radius of 4mm, 10 mio. bending cycles (@ radius 10mm) 55 Wide beam fibers Thru-beam type (one pair set) Type Shape of fiber head (mm) Model no. Sensing width 32mm W5 × H69 × D20 Tough FT-A32 Sensing range (mm) (note 1) Bending Fiber cable radius length FX-500 series U-LG LONG FAST H-SP STD 3600 (note 2) R2 (note 2) 3600 HYPR 3600 (note 2) 3600 (note 2) (note 2) 3600 2100 Sensing width 32mm f W5 × H69 × D20 FT-A32W R1 STD (note 2) HYPR (note 2) 3600 3600 3600 (note 2) 3600 (note 2) 3600 (note 2) 3000 Wide beam Sensing width 11mm W4.2 × H31 × D13.5 Tough FT-A11 R2 STD (note 2) 3600 2m HYPR (note 2) 3600 Sensing width 11mm W4.2 × H31 × D13.5 FT-A11W R1 STD (note 2) HYPR (note 2) 3600 3600 Array Sensing width 5.5mm W5 × H15 × D15 Tough FT-AL05 R2 STD 860 HYPR 2300 Notes: 1.) The sensing range of the free-cut type fiber may be reduced depending upon how the fiber is cut 2.) The length of the fiber cable affects the sensing range 3600 (note 2) 3600 (note 2) 3600 (note 2) 1100 3600 (note 2) 3600 (note 2) 3600 (note 2) 1300 1550 1500 50 170 FX-101 FX-102 Beam axis dia. (mm) Protection Ambient temperature 3600 (note 2) 3600 (note 2) 3.2 × 32 40 to +60°C 40 to +55°C 1900 3600 (note 2) IP40 (IEC) 2.2 × 11 40 to +70°C 1700 3400 40 to +55°C 250 0.25 × 660 5.5 55 to +80°C IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Wide beam fibers Reflective type Type Shape of fiber head (mm) Model no. Bending Fiber cable radius length Sensing range (mm) (note 1, 2) FX-500 series U-LG LONG FAST H-SP Wide beam Tough STD 200 W7 × H15 × D30 FD-A16 R4 200 HYPR 200 140 cannot use 75 2m Tough STD 530 W5 × H20 × D20 FD-AL11 R2 320 HYPR 510 180 670 50 Array Notes: 1.) The sensing range of the free-cut type fiber may be reduced depending upon how the fiber is cut 2.) The sensing range is specified for white, matt paper Tough High flexibility: min. bending radius of 4mm, 10 mio. bending cycles (@ radius 10mm) FX-101 FX-102 120 240 100 285 Protection Ambient temperature IP40 (IEC) 40 to +60°C 55 to +80°C 56 STANDARD FIBERS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Convergent reflective fibers Convergent reflective fibers for glass detection Reflective type Ultra-small Type Shape of fiber head (mm) Model no. Glas substrate detection Side sensing W25 × H7.3 × D30 Long sensing range W20 × H29 × D3.8 Long sensing range W23.5 × H29 × D4.5 Long sensing range W17 × H29 × D3.8 Short sensing range W18 × H29 × D3.8 Short sensing range W12 × H19 × D3 Short sensing range W12 × H19 × D3 W24 × H21 × D4 FD-L32H Tough FD-L30A Tough FD-L31A Tough FD-L22A Tough FD-L23 Tough FD-L11 Tough FD-L10 Tough FD-L21 W24 × H21 × D4 W6 × H18 × D14 FD-L21W Tough FD-L20H W7.2 × H7.5 × D2 FD-L12W Bending radius R4 R2 R4 R2 R4 R2 R1 R2 R1 Fiber cable length Sensing range (mm) (note 1, 2) FX-500 series U-LG LONG FAST H-SP STD 0 to 56 4m HYPR 0 to 110 0 to 87 0 to 74 1 to 38 Cannot use STD HYPR 0 to 43 0 to 43 0 to 43 0 to 43 0 to 42 0 to 29 3m STD 4 to 33 HYPR 3 to 35 STD 0 to 24 2m HYPR 0 to 31 STD 0 to 29 3m HYPR 0 to 30 STD 0 to 9.5 HYPR 0 to 11.5 STD 0 to 5 HYPR 0 to 6 STD 1.5 to 16 2m HYPR 1 to 19 STD 3 to 14 HYPR 1.5 to 15 STD 23 HYPR 45 STD 8 1m HYPR 14 4 to 33 4 to 33 4 to 32 5 to 25 0 to 28 0 to 27 0 to 24 0 to 18 0 to 30 0 to 30 0 to 28 1.5 to 24 0 to 10.5 0 to 10 0 to 9 0 to 8 0 to 5.5 0 to 5.5 0 to 4.5 0 to 4 1 to 18 1 to 18 2 to 15 3 to 12 2 to 15 2 to 15 4 to 14 6.5 to 10 35 32 2 to 15 5 to 9 12,5 12 0.5 to 7 0.5 to 4 FX-101 FX-102 Protection Ambient temperature 16 to 30 0 to 50 40 to +60°C 0 to 40 0 to 50 5 to 30 4 to 33 0 to +70°C 0 to 19 0 to 25 0 to 28 0 to 30 0 to 8 0 to 9 20 to +70°C IP40 (IEC) 0 to 4.5 0 to 5.5 3 to 15 1.5 to 16 40 to +60°C 7 to 12 3 to 14 5 to 15 1 to 30 40 to +70°C 1 to 4.5 0.5 to 7 IP30 (IEC) 40 to +60°C Notes: 1.) The sensing range specified for transparent glass 100×100×0.7mm (FD-L32H: edge, FD-L21 and FD-L21W: t2mm). (FD-L20H: white non-glossy paper, FD-L10: silicon wafers 100×100x2mm) 2.) The sensing range of the free-cut type fiber may be reduced depending upon how the fiber is cut Retroreflective type Type Shape of fiber head (mm) Model no. With polarizing filter Side sensing W5.2 × H9.5 × D16 W30 × H30 × D0.5 W7.5 × H2.2 × D11.2 FR-Z50HW Tough FR-KZ22E W4 × H2 × D21.5 W5.2 × H9.5 × D21 W10.6 × H28 × D10.1 W9.5 × H25 × D5.2 W28 × H10.6 × D10.1 Tough FR-KZ50H Tough FR-KZ50E Bending radius R1 Fiber cable length Sensing range (mm) (note 1, 2) FX-500 series STD HYPR 100 to 990 100 to 1900 U-LG LONG FAST H-SP 100 to 1400 100 to 1200 100 to 780 100 to 490 STD 15 to 310 HYPR 15 to 570 2m R2 STD 20 to 300 HYPR 20 to 1000 15 to 460 15 to 410 15 to 220 15 to 100 20 to 800 20 to 400 20 to 200 20 to 200 FX-101 FX-102 Protection Ambient temperature 100 to 550 100 to 830 IP40 (IEC) 25 to +55°C 15 to 200 15 to 360 IP30 (IEC) 40 to +60°C 20 to 200 20 to 350 Narrow view Side sensing Top sensing Notes: 1.) The sensing range of the free-cut type fiber may be reduced depending upon how the fiber is cut 2.) The sensing range is specified for the reflector Tough High flexibility: min. bending radius of 4mm, 10 mio. bending cycles (@ radius 10mm) 57 Heat-resistant fibers Thru-beam type (one pair set) Sensing range (mm) (note 1) Type Temperature Shape of fiber head (mm) Heat-resistant fiber 350°C 200°C 130°C Lens mountable: FX-LE1/LE2/SV1 M4 30 Lens mountable: FX-LE1/LE2/SV1 M4 23 Lens mountable: FX-LE2 M4 16 Model no. Bending radius Fiber cable length FX-500 series FT-H35-M2 R25 FT-H20W-M1 R10 FT-H13-FM2 R25 STD 2m 430 HYPR 1200 STD 1m 470 HYPR (note 2) 1600 STD 700 2m HYPR 3300 U-LG LONG FAST H-SP 880 670 250 80 1.000 840 300 90 1900 1300 410 140 Lens mountable: FX-LE1/LE2/SV1 M4 23 FT-H20-J20-S (note 5) FT-H20-J30-S (note 5) 200mm (note 3) 300mm (note 3) STD 470 HYPR Heat-resistant (joint) 200°C Side sensing ø 3.8 24 ø4 FT-H20-J50-S (note 5) FT-H20-VJ50-S (note 5) FT-H20-VJ80-S (note 5) Heat resistant R18 (note 4) 500mm (note 3) 800mm (note 3) STD 600 HYPR Notes: 1.) The sensing range of the free-cut type fiber may be reduced depending upon how the fiber is cut 2.) The length of the fiber cable affects the sensing range 3.) The fiber length of the heat-resistant side cannot be cut 4.) Bending radius R=25mm or more 5.) Heat-resistant side and ordinary temperature fiber are sold together as a set 1600 2100 1000 790 300 90 1300 980 390 120 FX-101 FX-102 170 490 100 300 250 700 135 420 150 500 Beam axis dia. (mm) ø1.2 ø0.8 ø1.5 ø1.2 Ambient temperature 60 to +350°C 60 to +200°C 60 to +130°C 60 to +200°C IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Heat-resistant fibers Reflective type Sensing range (mm) (note 1, 2) Type Temperature Shape of fiber head (mm) Threaded 350°C 200°C 130°C Coaxial M6 25 Coaxial M6 28 M6 21 300°C W19 × H27 × D5 250°C W21 × H34.5 × D5 Model no. Bending radius Fiber cable length FX-500 series FD-H35-M2 FD-H20-M1 FD-H13-FM2 R25 FD-H30-L32 FD-H25-L45 STD 2m 260 HYPR 720 STD 1m 330 HYPR 840 STD 350 2m HYPR 880 STD 2m 17 HYPR 40 STD 3m 5 to 42 HYPR 4 to 43.5 U-LG LONG FAST H-SP 540 460 150 45 550 500 200 55 640 600 200 65 30 25 12 1.5 to 6 4 to 43 4.5 to 43 5 to 40 6.5 to 34 FX-101 FX-102 Ambient temperature 75 280 60 to +350°C 120 300 60 to +200°C 100 280 60 to +130°C 2 to 9 0 to 17 60 to +300°C 7 to 35 7 to 38 20 to +250°C ( ) Standard fibers 20 to +70°C Heat-resistant fiber Glass substrate detection convergent reflective 180°C W19 × H27 × D5 FD-H18-L31 STD 16 2m HYPR 60 32 24 13 2 to 6.5 0 to 10 0 to 25 Notes: 1.) The sensing range is specified for white, matt paper (50×50mm, glas substrate: FD-H30-L32, FD-H18-L31, clear glas 100×100×0.7mm: FD-H25-L43 and FD-H25-L45) 2.) The length of the fiber cable affects the sensing range 60 to +180°C 58 STANDARD FIBERS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Chemical/Vacuumresistant fibers Chemical-resistant fibers Thru-beam type (one pair set) Oil-resistant Type Shape of fiber head (mm) Model no. M4 Square head Cable-protection type Compatible with lens W7×H9,5×D15,5 Side sensing W10×H11×D21,2 SEMI W7 x H15 x D13 FT-R44Y FT-R60Y FT-Z802Y M6 Bending Fiber caradius ble length Sensing range (mm) (note 1) FX-500 series U-LG LONG FAST H-SP STD 720 HYPR 3000 R4 STD 2100 HYPR 2m (note 2) 3600 1600 1100 430 130 3600 3600 1.260 400 STD 3600 (note 2) R25 HYPR 3100 3600 (note 2) 1900 (note 2) 3600 470 Chemical-resistant Flat Cylindrical Heat-resistant 115°C ø5.5 (25) ø5.5 (25) FT-HL80Y FT-L80Y Side sensing metal free ø5.5 (25) FT-V80Y STD (note 2) HYPR (note 2) 3600 3600 STD R30 (note 2) 3600 2m HYPR (note 3) (note 2) 3600 STD 1300 HYPR (note 2) 3600 Notes: 1.) The sensing range of the free-cut type fiber may be reduced depending upon how the fiber is cut 2.) The length of the fiber cable affects the sensing range 3.) The allowable cutting range is 500mm from the end inserted at the amplifier 4.) The fiber is oil-resistant 3600 (note 2) 3600 (note 2) 2300 740 3600 (note 2) 3600 (note 2) 2800 920 2800 2200 800 240 FX-101 FX-102 210 640 690 1.890 520 3100 990 2340 1.100 2.600 340 800 Beam axis dia. (mm) ø1 ø3,5 ø3.7 ø2.8 Protection IP67 (note 4) IP68G Ambient temperature 55 bis +80°C 0 to +60°C 40 to +115°C 40 to +70°C Vacuum-resistant fibers Thru-beam type (one pair set) Type Shape of fiber head (mm) 300°C Lens mountable: FV-LE1/SV2 M4 30 Model no. Bending Fiber cable radius length Sensing range (mm) FX-500 series U-LG LONG FAST H-SP STD 590 FT-H30-M1V-S (note) R18 1m 27 HYPR 470 160 1000 55 FX-101 FX-102 Beam axis dia. (mm) Ambient temperature 110 280 ø1.2 30 to +300°C Vacuum-resistant Thru-beam type Note: Sold as a set comprising vacuum type fiber and photo-terminal (FV-BR1) Reflective type Convergent reflective Type Shape of fiber head (mm) Model no. Reflective type 300°C W9.5 × H5.2 × D15 FD-H30-KZ1V-S (note 1) 300°C, Glass substrate detection W19 × H5 × D27 FD-H30-L32V-S (note 1) Bending Fiber cable radius length Sensing range (mm) (note 2) FX-500 series U-LG LONG FAST H-SP STD 1m 20 to 200 HYPR 5 to 500 R18 STD 3m 8 HYPR 18 10 to 340 15 to 270 20 to 120 20 to 45 12 10 5,5 1.5 to 3 Vacuum-resistant Notes: 1.) Sold as a set comprising vacuum type fiber and photo-terminal (FV-BR1) 2.) The sensing range is specified for transparent glass 100×100×0.7mm FX-101 FX-102 Ambient temperature 25 to 80 10 to 220 2.5 to 6.5 0 to 11 30 to +300°C 59 Fibers for liquid leak/liquid detection Type Shape of fiber head (mm) Model no. Bending radius Fiber cable length Description Protection Ambient temperature Heat resistant 125°C Fluorine resin coating ø6 FD-F8Y Protective tube R40 Standard fibers R15 2m (note) ø6mm Protective tube: Fluorine resin, Length 1m (not cuttable) Liquid surface not contacted: beam received Liquid surface contacted: no beam received IP68 (IEC) 40 to +125°C Contact type Liquid level sensing Heat resistant 105°C Fluorine resin coating ø4 Heat resistant 70°C Fluorine resin coating ø4 SEMI S2 W20×H30×D10 FD-HF40Y FD-F41Y Protective tube R20 Standard fibers R10 ø4mm Protective tube: Fluorine resin, Length 500mm (not cuttable) 2m Liquid surface not contacted: beam received Liquid surface contacted: no beam received Tough FD-F71 Protective tube R20 Liquid leak detection Standard fibers Leak absent: beam received R4 5m Leak present: no beam received 40 to +105°C IP67 (IEC) 40 to +70°C 20 to +60°C Liquid leak detection Pipe-mountable type Liquid level sensing Default W25 × H13 × D20 FD-F41 For wall thickness 1mm W25 × H13 × D20 FD-F4 R10 Applicable pipe diameter: Outer dia.: ø6mm to ø26mm Material: transparent pipe, PFA (fluorine resin, polycarbonate, acrylic, glass) Wall thickness: 1 to 3mm Liquid absent: beam received Liquid present: no beam received Applicable pipe diameter: Outer dia.: ø6mm to ø26mm Material: transparent pipe, PFA (fluorine resin). Wall thickness: 1mm. Liquid absent: beam received Liquid present: no beam received Liquid lsensing Mountable on pipe W6.5 × H28.3 × D17 Tough FD-FA93 SEMI S2 W23 × H20 × D17 Tough FT-F93 2m Applicable pipe diameter: Outer dia.: ø8mm or more (When used with the tying bands: ø8mm to ø80mm) R4 Material: transparent pipe, PFA (fluorine resin). Liquid absent: beam received Liquid present: no beam received Protective tube R20 Standard fibers R2 Applicable pipe diameter: Outer dia.: ø3mm to ø10mm Material: transparent pipe, PFA (fluorine resin). Wall thickness: 0.3 to 1mm Liquid absent: beam received Liquid present: no beam received Note: The allowable cutting range is 500mm from the end inserted at the amplifier Tough High flexibility: min. bending radius of 4mm, 10 mio. bending cycles (@ radius 10mm) 40 to +100°C 40 to +70°C IP40 (IEC) 40 to +60°C IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Fibers for liquid leak detection Accessories · RF-003 (Reflector for FR-KZ21/KZ21E) · RF-13 (Reflective tape for reflective type) · FX-CT1 (Fiber cutter) · FX-CT2 (Fiber cutter) · FX-CT3 (Fiber cutter) · FX-AT2 (Attachment for fixed-length fiber, Orange) · FX-AT3 (Attachment for ø2.2mm fiber, Clear orange) · FX-AT4 (Attachment for ø1mm fiber, Black) · FX-AT5 (Attachment for ø1.3mm fiber, Gray) · FX-AT6 (Attachment for ø1mm / ø1.3mm fiber, Black/Gray) FX-CT3 FX-AT2 FX-AT3 RF-003 RF-13 FX-CT1 FX-AT4 FX-AT5 FX-CT2 FX-AT6 60 STANDARD FIBERS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Lens Thru-beam type fiber Model no. Picture Standard Fibers Fiber Sensors Communication Units Mark Sensors FX-LE1 Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories FX-LE2 FX-SV1 FV-LE1 Description Expansion lens increases the sensing range by 5 times or more, ambient temperature: -60 to +350°C (note 1, 2) Expansion lens increases the sensing range by 6 times or more, ambient temperature: -60 to +350°C (note 1, 2) Side-view lens, beam axis is bent by 90°, ambient temperature: -60 to +300°C (note 1, 2) Expansion lens for vacuum fiber increases the sensing range by 4 times or more, ambient temperature: -60 to +350°C (note 1, 2) FV-SV2 Lens Vacuum resistant side-view lens, beam axis is bent by 90°, ambient temperature: -60 to +300°C (note 1, 2) Notes: 1.) Consider the ambient temperature of the fibers to be used in combination 2.) Please test the functionality after mounting the lenses Applicable fibers FT-43, FT-42, FT-42W, FT-45X, FT-R40, FT-R43, FT-H35-M2, FT-H20W-M1, FT-H20-M1, FT-H20-J50-S, FT-H20-J30-S, FT-H20-J20-S FT-H30-M1V-S Reflective type fiber Model no. Picture FX-MR1 Description Pinpoint spot lens, distance to focal point 6±1mm, spot diameter Ø 0.5mm, ambient temperature -40 to +70°C (note 1, 2) FX-MR2 Distance to focal point Spot diameter Zoom lens, screw-in depth (7-14mm), distance to focal point (18.5- 43mm), spot diameter Ø 0.7-2mm, ambient temperature: -40 to +60°C (note 1, 2) FX-MR3 Distance to focal point Spot diameter Extremely fine spot, distance to focal point: 7.5±0.5mm, spot diameter: FD-EG31 Ø 0.15mm/ FD-EG30 Ø 0.3mm/ FD-42G, FD-42WG, FD-32G, FD-32GX Ø 0.5, ambient temperature: -40 to +70°C (note 1, 2) Notes: 1.) Consider the ambient temperature of the fibers to be used in combination 2.) Please test the functionality after mounting the lenses Applicable fibers FD-42G, FD-42GW FD-EG31, FD-EG30, FD-42G, FD-42GW, FD-32G, FD-32GX FIBER SENSORS COMMUNICATION UNITS 61 Functions Function handy for startup and maintenance Using a PLC or PC, this communication unit not only facilitates inputs (teaching, bank switching) to a digital fiber sensor e.g. FX-301(P), but also received-light amount and output status verifications greatly enhance workability during startup and maintenance. Intuitive integration at the controller level Rapid integration at the controller level enables reliable monitoring, remote maintenance or remote control via open networks. Several units can be configured with minimal wiring efforts. Data can be saved centrally, where it can be archived or used for evaluation purposes. IO-Link Sensors Photoelectric Communication Sensors Fiber-optic Sensors units Communications units for flexible solutions Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Combining different units The ability to combine different sensor types, e.g. laser sensors, pressure sensors or digital fiber-optic sensors, opens up many application areas, especially for special purpose machinery manufacture. The sensors themselves communicate with each other via an infrared interface. Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories FX-301; FX-305 SC-A01; SC-A02 FX-501; FX502 SC-G03-03 LS-501 DPS-401 LS-401 62 MARK SENSORS Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors LX-100 Laser Sensors Safety Sensors Introducing the 3-LED mark sensor Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories LX-100 Functions Equipped with 3 LEDs: red, green and blue To detect any marking, this sensor is equipped with red, green and blue LED light emitting elements all in one. In addition, it uses a coaxial reflective optics system and realizes high precision sensing when used with a 1/4000 resolution 12-bit A/D converter. Image schematic Coaxial reflective and a sharp 1x5mm spot enable high precision sensing. 2 selectable sensing modes for any application Mark mode: This sensing mode automatically selects a single color from the 3 R-G-B LEDs RED GREEN BLUE to realize an ultra quick 45µs response time. The automatic optimal LED selection function Automatic selection automatically selects the LED that is most suitable for the sensing. This function is perfect for ultra quick sensing. Color mode: All 3 R-G-B LEDs light up and high precision mark color discrimination occurs using the R-G-B reflective light ratio. This function enables effective detection of films with patterns around the areas of the mark. Even beginners can quickly master MODE NAVI operation The sensor's basic operations are represented by 6 indicator lamps (MODE NAVI). The user can check what mode the sensor is presently in with a quick glance rendering operation simple. Sensing status digitally controllable The sensing status, displayed numerically, can be verified at a glance. Also, the sensor settings for each type of packing film can be digitally indicated. Direct codes enable settings verification at a glance The settings for the LX-100 series sensors are displayed using a 4-digit direct code. Direct codes enable easy settings verification and maintenance by phone. Super simple teaching Teaching (setting the threshold value) is simple, even in "Mark Mode" or "Color Mode". In addition, because teaching via an operation panel or other external input device is also possible, models can be easily interchanged. Compact design for significant space savings Cable and plug-in connector types are available depending on the equipment used. These sensors can be easily integrated into already existing systems. The color around letters is detected as a mark. Predetermined colors are detected as marks. Typical applications Tube positioning Detects printed marks to align tubes. Mark detection Mark detection of packaging film. Technical specifications Type Cable M12 plug-in connector type Model no. NPN output PNP output LX-101 LX-101-P LX-101-Z (note 1) LX-101-P-Z Sensing range 10±3mm Power supply Output Output operation Response time Sensitivity setting Protection 12 to 24VDC ±10% 2 x NPN or 2 x PNP open-collector transistor; max. 50mA 1 x NPN or 1 x PNP open-collector transistor; max. 100mA Mark mode: Light-ON/Dark-ON (auto-setting on teaching) Color mode: Consistent-ON/Inconsistent-ON (setting on teaching) Mark mode: max. 45µs; color mode: max. 150µs Mark mode: 2-level teaching/Limit teaching; Color mode: 1-level teaching IP67 (IEC) Ambient temperature Emitting element Connection method Cable 2m -10 to +55°C Combined red/green/blue LED (Peak emission wave length: 640nm/525nm/470nm) M12 connector (note 2) Dimensions (HxWxD) 35×24×57mm 35×24×71.5mm Accessories Notes: 1.) Suffix -Z=M12 connector type 2.) Cable is not included in delivery. Please select under accessories (page 129) M4 screws with washers, 2 pcs. 63 Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories LX-100 64 LASER SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors EX-L200 Miniature laser sensor with a built-in amplifier! Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Minute object sensing type EX-L211 (thru-beam) The beam of the EX-L200 series is purposely widened to have a lower beam density and little beam spread so that when detecting minute objects, even a slight change in the light received intensity will not be missed. Minute detection (reflective) With a repeatability of 0.02mm the sensor is perfectly suited for positioning tasks. EX-L200 A 0.3mm minute object is detectable at any location between the emitter and receiver! Laser beam has little beam spread! Environmental resistance Thanks to the IP67 casing, the sensor is suitable for installation in humid and dusty environments. Easy alignment Beam alignment is carried out by looking at the red spot reflected on the beam alignment screen to match with the actual object. The optimum position can be understood at a glance by looking at the beam alignment screen and stability indicator (green). Object to be sensed Stability indicator (Green) Beam alignment screen Bright red spot Shadow of object to be sensed Easy adjustment by reflecting the shadow of the detection object. 65 Typical applications Detecting ICs that are out of position in multiple palettes Detecting the tip of a very thin pipe Detecting objects from an opening Detecting very small objects Technical specifications Type Model no. NPN output PNP output Sensing range Emission spot size Object to be sensed Power supply voltage Output Response time Emitting element Protection Ambient temperature Material Connection method Dimensions (HxWxD) Accessories Thru-beam type EX-L211 EX-L211P 1m 6x4mm at 1m Ø 2mm (opaque) EX-L212 EX-L212P 3m 8x5.5mm at 1m Ø 3mm (opaque) 25.9x 8.2x12mm Mounting plates MS-EXL2-2 2 pcs. Retro reflective type EX-L291 Spot reflective EX-L221 Diffuse reflective type Convergent reflective spot EX-L261 Convergent reflective line spot EX-L262 EX-L291P EX-L221P EX-L261P EX-L262P 4m 6x4mm at 1m Ø 25mm (opaque) 45 to 300mm Ø 1mm at 300mm 20 to 50mm Ø 1mm at 50mm (convergent point: 22mm) Opaque, transparent 20 to 70mm 1x5mm at 50mm (convergent point: 22mm) 12 to 24VDC ±10% PNP / NPN open-collector transistor, max. 50mA Max. 0.5ms Red semiconductor laser (class 1) IP67 (IEC) 10 to +55°C Enclosure: PBT, front cover: acrylic; lenses: glass Cable, 2m 29.9x8.2x13mm 29.9x8.2x13.5mm Reflector RF330, mounting plate MS-EX-L2-3 1 pc. Mounting plate MS-EX-L2-3 1 pc. IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories EX-L200 66 LASER SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors 4 types of identically sized sensor heads available They are approximately the same size as general purpose photoelectric sensors, and the mounting method is identical. Accessories Long sensing range line reflective type: LS-H22 LS-400 Long sensing range spot reflective type: LS-H21 (Class 1 type is also available.) Identical shape and mounting Coaxial retroreflective type: LS-H91 Long sensing range coaxial retroreflective type: LS-H92 (Class 1 type is also available.) General purpose photoelectric sensor CX-400 series Slim size 11.2mm Industry standard mounting pitch 25.4mm Coaxial reflective type with a long sensing range of 30m The introduction of the LS-H92 long sensing range coaxial reflective type sensor means that even longer sensing ranges are now possible. Spot size adjustment The long sensing range spot reflective type and long sensing range line reflective type have a built-in spot-size adjuster that enables spot size adjustment according to the object for optimal setting. LS-400 User-friendly, advanced high precision laser sensing! Accurately senses the minutest variations When sensing at close range or when the target objects are transparent or minute, adjust the sensor receiving sensitivity to one of 3 levels for the optimal setting. In addition, changing the receiving sensitivity will not affect the response time. Easy setting, dual display Equipped with 2 large 4-digit digital displays. While checking the current light-receiving amount (red display), the optimal threshold value (green display) can be set easily. 10 mm thickness Threshold value Green LED, 4 digits (max. display: 9999) Current light receiving amount display Red LED, 4 digits (max.: 9999) Large jog switch Large MODE key Wiring and space savings The quick-connection cables enable reductions in wiring (connector type). The connections and man hours for the intermediate terminal block setup can be reduced and valuable space saved. Also LS-400 series amplifiers can be connected side-byside with FX-300/FX-500 series fiber sensors. Spot-size adjuster (multiple turn) Fiber sensor 67 Typical applications Interference prevention The automatic interference prevention function protects against interference among up to 4 sensors. Emission halt function Using the emission halt function, the laser beam can be stopped via external input, e.g. when a spot appears within the visual range of an image processor. External teaching function Teaching can be conveniently performed externally for laser sensors installed inside a device. IC pin check from remote position Checking protrusion of glass substrate LS-H21 Technical specifications Sensor heads Coaxial retroreflective Diffuse reflective Type Standard Long sensing range type Long sensing range spot-reflective Long sensing range line reflective Model no. (note 1) LS-H91(F) (-A) (note 2) LS-H92(F) LS-H21(F) (-A) (note 2) LS-H22(F) (note 3) Sensing range 0.1 to 7m (U-LG) 0.1 to 5m (STD) 0.1 to 3m (FAST/H-SP) 0.2 to 30m (U-LG) 0.2 to 20m (STD) 0.2 to 10m (FAST/H-SP) 30 to 1.000mm (U-LG) 30 to 500mm (STD) 30 to 300mm (FAST/H-SP) 30 to 1.000mm (U-LG) 30 to 500mm (STD) 30 to 300mm (FAST/H-SP) Ambient temperature 10 to +55°C Emitting element Red semiconductor laser, LS-Hp: Laser class 2, LS-Hp-A: Laser class 1, Dimensions (W×H×D) 11.2×31×25mm Accessories Reflector RF-330 1 pc., warning label (English) 1 pc. Reflector RF-230 1pc. warning label (English) 1 pc. Warning label (English) 1 pc. LS-MR1 Lens attachment for line reflective 1 pc., warning label (English) 1 pc. Notes: 1.) LS-Hx conforms to IEC/JIS/GB standards LS-HxF conforms to FDA/IEC/JIS standards 2.) LS-H91(F)-A, LS-H21(F)-A: Class 1 type 3.) LS-H22(F) = LS-H21(F) with the LS-MR1 lens attachment for line reflective type Amplifiers Type Connector type (note) Cable type Model no. NPN output PNP output LS-401 LS-401P LS-401-C2 LS-401P-C2 Power supply voltage 12 to 24VDC ±10% Output PNP / NPN open-collector transistor, max. 100mA Output operation Response time Digital display Automatic interference prevention function Ambient temperature Connection method Selectable either Light-ON or Dark-ON, with jog switch max. 80µs (H-SP), max. max. 150µs (FAST), max. 500µs (STD), max. 4ms (U-LG), selectable with jog switch 4 digit (green) and 4 digit (red) LED display Incorporated (up to four sets of sensor heads can be mounted close together; however disabled when in H-SP mode) 10 to +55°C (If 4 to 7 sensors are mounted close together: 10 to +50°C) (If 8 to 16 sensors are mounted close together: 10 to +45°C) Connector (note) Cable, 2m Dimensions (W×H×D) 10×30×75mm Note: The cable for amplifier connection is not supplied as an accessory with the connector type amplifier. Please select under accessories (page 129) IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories LS-400 68 LASER SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors LS-500 Miniature laser head with user-friendly amplifier Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories LS-500 Features Different sensor heads available The LS-500 series of laser sensors offers four different laser heads. Select the appropriate shape of the heads depending on the requirements of your application. Actual size M6 Body: Stainless steel (SUS) Operation indicator (receiver only) 30 mm Multifunctional amplifier The LS-500 series amplifier with its clearly laid-out display offers a user-friendly design. The definition of settings, such as the adjustment of threshold values, database and logic functions, is quite simple. The model with the analog current output provides a comfortable reading out of measurement values. Easy to combine Due to its design and the possibility to mount the sensor on a DIN rail, the LS-500 can be connected quickly and easily to other sensors such as fiber amplifiers or pressure sensors. Robust sensor head The robust sensor head is made of stainless steel and can be used under rough mounting conditions. The type with M6 screws is mountable even in the smallest spaces. You can check immediately with the LED indicator at the receiver whether the light is received correctly. Reflective surface Emitting element Laser light Sensing object Reflected light Coaxial principle Receiving lens Receiving element Reflective photoelectric sensor Emitting part Receiving part Coaxial design Receiving part FX-500 fiber sensor LS-500 laser sensor Highest precision With the help of the coaxial precise light direction, the object sensing can be executed even through smallest openings. With a beam diameter of max. 6mm the retroreflective type has a sensing range of up to 2.5m. 69 Typical applications Position control of a workpiece Detecting marks in a mold Detecting workpieces through a Detection of a transparent foil worktop Technical specifications Sensor heads Type Model no. Cylindrical LS-H101 Thru-beam Rectangular LS-H102 Coaxial reflective type LS-H201 Coaxial retroreflective type LS-H901 IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Sensing range Ambient temperature Emitting element Dimensions ( ØxD)/ (HxWxD) Accessories 1m M6x30mm M6 screws, 4 pcs., washer, 2 pcs. 1m 600mm (U-LG), 300mm (STD), 150mm (H-SP) 0.01 to 2m (U-LG), 0.01-1m (STD), 0.01-1m (H-SP) 10 to +55°C Red semiconductor laser (laser class 1) 8.2x26x12mm MS-EXL2-2 (mounting plate) 2 pcs. 6.4x24x18mm MS-LS-1 (mounting bracket) 1 pc. MS-LS-1 (mounting bracket) 1 pc. RF-330 (reflector) 1 pc. LS-500 Amplifiers Type Connector type (note) Cable type Model no. NPN output PNP output LS-501 LS-501P LS-501-C2 LS-501P-C2 Supply voltage 12 to 24V DC+10/-15% Output PNP/NPN open-collector transistor, max. 50mA Analog output - 4 to 20mA Output operation Selectable either Light-ON or Dark-ON Response time Max. 60µs (H-SP), 150µs (FAST), 250µs (STD), 500µs (LONG), 5ms (U-LG), 24ms (HYPR) Digital display 4 digit, dual LED display (green and red) Automatic interference prevention function Built-in (up to 4 sensors: STD, LONG, U-LG, H-SP; up to 2 sensors: FAST; 0 sensors: HYPR) Ambient temperature -10 to +55°C (if 4 to 7 units are mounted close together: -10 to +50°C, if 8 to 16 units are mounted close together: -10 to 45°C) Connection method Connector (note) 2m cable Dimensions (HxWxD) Note: Cable is not included in delivery. Please select under accessories (page 129) 10x32x77mm 70 SAFETY SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Easy installation of emitter and receiver thanks to improved optical properties Thanks to a higher emission power, the SF4D not only works reliably on shorter distances, but also covers a longer sensing range up to 15m. SF4D 15m sensing range SF4D Typ 4 · PLe · SIL3 Robust safety light curtain Main functions > Operation monitoring » Monitoring of the incident beam intensity and extraneous light » I/O monitoring > Error history display *2 SF4D series only > Light blockage history, unstable light incidence history > Muting setting function > Override setting function > Blanking setting function (both fixed and floating blanking) > External device monitoring setting function > Auxiliary output setting functions Which functions are available depends on the synchronization method and the type of cables (5-core, 8-core, 12-core) used. Twisting- and bending-resistant design The new interior design makes the safety light curtain more rigid and thus more robust. The SF4D does not bend or twist as easily when it comes into contact with other objects. Resists twisting Resists bending Resists shock The safety output is separated from IO-Link communication. Safety Light Curtain SF4D series PC PLC master unit *2 Safety PLC *1 *1 *1 NEW IO-Link Communication Unit SFD-WL3 *1: 8-core cable for safety light curtain (optional) *2: 4-core cable with M12 connector (commercially available, see note) Note: The master and the communication unit must be connected with a cable of min. Ø0.3mm2. The total length of the cable must not exceed 20m. Selection of light curtain Typical applications Serial connection of 5 safety light curtains for roboter housing 71 Monitoring of received light intensity and extraneous light during operation Automobile production with muting IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories SF4D Technical specifications Typ Finger protection type Hand protection type Arm / Foot protection type Model no. SF4D-F (notes 1,2) SF4D-H SF4D-A Safety category Typ 4, PLe, SIL3 Sensing height 150 to 1270mm 150 to 1910mm Sensing range 0 to 12m 0 to 15m Resolution 10mm 20mm 40mm Object to be sensed Min. Ø 14mm (opaque) Min. Ø 25mm (opaque) Min. Ø 45mm (opaque) Power supply 24V DC ±10% Response time ON OFF: max.10ms, OFF ON: max. 50ms Control outputs OSSD1 and OSSD2 (2 x PNP or 2 x NPN open collector transistor, switchable), max. 350mA Emitting element Infrared LED Protection IP67/ IP65 (IEC) Ambient temperature -10 to +55°C Material Frame: Aluminium / Enclosures: Acrylic, Polycarbonate, Nylon Connection method Connector Dimensions (HxWxD) Hx30x28mm (H= protective height) Notes: 1.) Number of beam channels 2.) For a system configuration, please contact your sales office or service hotline: +49 89 45354-2737 72 SAFETY SENSORS IO-Link Sensors Photoelectric Sensors Finger protection type (min. object to be sensed 14mm, 10mm beam pitch) Model no. SF4D-F15 Sensing range No. of beam axes 15 Fiber-optic SF4D-F23 23 Sensors SF4D-F31 31 Standard Fibers SF4D-F39 39 SF4D-F47 47 Fiber Sensors Communication Units SF4D-F55 0 to 7m (short mode) 0 to 12m (long mode) 55 SF4D-F63 (selectable by DIP switch) 63 Mark Sensors SF4D-F71 71 Laser Sensors SF4D-F79 79 SF4D-F95 95 Safety Sensors SF4D-F111 111 Pressure & SF4D-F127 127 Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Hand protection type (min. object to be sensed 25mm, 20mm beam pitch) Model no. SF4D-H8 SF4D-H12 SF4D-H16 SF4D-H20 Sensing range No. of beam axes 8 12 16 20 SF4D-H24 24 SF4D-H28 28 SF4D SF4D-H32 32 SF4D-H36 0 to 9m (short mode) 36 0 to 15m (long mode) SF4D-H40 (selectable by DIP switch) 40 SF4D-H48 48 SF4D-H56 56 SF4D-H64 64 SF4D-H72 72 SF4D-H80 80 SF4D-H88 88 SF4D-H96 96 Protective height 150mm 230mm 310mm 390mm 470mm 550mm 630mm 710mm 790mm 950mm 1110mm 1270mm Protective height 150mm 230mm 310mm 390mm 470mm 550mm 630mm 710mm 790mm 950mm 1110mm 1270mm 1430mm 1590mm 1750mm 1910mm Arm / Foot protection type (min. object to be sensed 45mm, 40mm beam pitch) Model no. SF4D-A4 SF4D-A6 SF4D-A8 SF4D-A10 SF4D-A12 SF4D-A14 SF4D-A16 SF4D-A18 SF4D-A20 SF4D-A24 SF4D-A28 SF4D-A32 SF4D-A36 SF4D-A40 SF4D-A44 SF4D-A48 Sensing range 0 to 9m (short mode) 0 to 15m (long mode) (selectable by DIP switch) No. of beam axes 4 6 8 10 12 14 16 18 20 24 28 32 36 40 44 48 Protective height 150mm 230mm 310mm 390mm 470mm 550mm 630mm 710mm 790mm 950mm 1110mm 1270mm 1430mm 1590mm 1750mm 1910mm Beam pitch 10mm Beam pitch 20mm Beam pitch 40mm 73 Features Sensor height = protective height The length of the main unit equals the protective height so that installation is possible in places where space is limited. No blindzone occurs at the joints between light curtains when light curtains are connected in series. Finger/hand and arm/foot protection available Finger protection type SF4B-F MMiinnimimumumsensseinngsoinbjgecot bject "25m1m4mm (1200mmmmbeabmeapmitchp) itch) Hand protection type SF4B-H MMiinnimimumumsensseinngsoinbjgecot bject 25m2m5mm (2200mmmmbebaemapmitchp)itch) Arm / Foot protection type SF4B-A MinimMiunmimusmensesninsigngoobbjecctt "25mm 45mm (20 m(4m0mbmeabemamppitictchh) Response time of 14ms and constant safety distance A fast response time of 14ms has been achieved regardless of the number of beam channels, the beam axis pitches and the number of units connected in series. This reduces calculation work required for the safety distances. A muting control function is provided to increase both safety and productivity The light curtain is equipped with a muting control function that causes the line to stop only when a person passes through the light curtain, not when an object passes through. Muting lamp Light curtain SF4B series SF4B (V2) Type 4 · PLe · SIL3 New concepts combining greater safety and higher productivity! IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Built-in safety relay The light curtain has a built-in external device monitoring (EDM) function and an interlock function. The safety circuit is constructed so that a separate safety relay unit is not needed, and the control board is also more compact, both of which contribute to lower costs. Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Improved ambient light immunity The integrated ELCA function (Extraneous Light Check & Avoid) prevents interference from ambient light or other light curtains and even from welding plants. SF4B (V2) Digital error indicator If an error occurs, details of the error appear on the digital display so that maintenance can be carried out more quickly. Universal design that can be used anywhere in the world The SF4B series combines PNP transistor output and NPN transistor output in a single model. Overseas equipment that uses PNP, replacement with NPN sensors, factories that are positively grounded, and transfer of equipment overseas are all situations where the control circuits for a single model are suitable for use worldwide. Muting sensor CX-400 series 74 SAFETY SENSORS IO-Link Sensors Photoelectric Sensors Typical applications Guarding space around welding robot A spatter protection hood type perfect for welding devices is also available. Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Technical specifications SF4-BH64 SF4B (V2) Type Model no. Finger protection type SF4B-Fp(V2) (note) Hand protection type SF4B-Hp(V2) Arm / Foot protection type SF4B-Ap(V2) Safety category Type 4, PLe, SIL3 Sensing height 230 to 1270mm 230 to 1910mm Sensing range 0 to 7m (depending on type up to 9m) Resolution 10mm 20mm 40mm Object to be sensed Min. Ø 14mm (opaque) Min. Ø 25mm (opaque) Min. Ø 45mm (opaque) Power supply 24VDC +/10% Response time ON OFF: max. 14ms / OFF ON: max. 90ms Control outputs OSSD1 and OSSD2 (2 x PNP or 2 x NPN open collector transistor, switchable), max. 200mA Emitting element Infrared LED Protection IP67 / IP65 (IEC) Ambient temperature 10 to +55°C Material Frame: Aluminium / Enclosures: Acrylic, Polycarbonate, ABS Connection method Connector Dimensions (HxWxD) Hx30x28mm (H= protective height) Notes: For a system configuration, please contact your sales office or service hotline: +49 89 45354-2737 Arm / Foot protection type Hand protection type Finger protection type Sensing height Sensing range 0-7m 0-9m 0-7m 0-9m 0-7m Model no. SF4B-F23(V2) SF4B-F31(V2) SF4B-F39(V2) SF4B-F47(V2) SF4B-F55(V2) SF4B-F63(V2) SF4B-F71(V2) SF4B-F79(V2) SF4B-F95(V2) SF4B-F111(V2) SF4B-F127(V2) SF4B-H12(V2) SF4B-H16(V2) SF4B-H20(V2) SF4B-H24(V2) SF4B-H28(V2) SF4B-H32(V2) SF4B-H36(V2) SF4B-H40(V2) SF4B-H48(V2) SF4B-H56(V2) SF4B-H64(V2) SF4B-H72(V2) SF4B-H80(V2) SF4B-H88(V2) SF4B-H96(V2) SF4B-A6(V2) SF4B-A8(V2) SF4B-A10(V2) SF4B-A12(V2) SF4B-A14(V2) SF4B-A16(V2) SF4B-A18(V2) SF4B-A20(V2) SF4B-A24(V2) SF4B-A28(V2) SF4B-A32(V2) SF4B-A36(V2) SF4B-A40(V2) SF4B-A44(V2) SF4B-A48(V2) Protective height (mm) 230 310 390 470 550 630 710 790 950 1110 1270 230 310 390 470 550 630 710 790 950 1110 1270 1430 1590 1750 1910 230 310 390 470 550 630 710 790 950 1110 1270 1430 1590 1750 1910 Installation height (mm) 286 366 446 526 606 686 766 846 1006 1166 1326 286 366 446 526 606 686 766 846 1006 1166 1326 1486 1646 1806 1966 286 366 446 526 606 686 766 846 1006 1166 1326 1486 1646 1806 1966 75 No. of beam axes 23 31 39 47 55 63 71 79 95 111 127 12 16 20 24 28 32 36 40 48 56 64 72 80 88 96 6 8 10 12 14 16 18 20 24 28 32 36 40 44 48 IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories SF4B (V2) 76 SAFETY SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Compact size The SF4B-C series has been designed to mount flush with the aluminum frame. This means the machine opening will not be made any narrower. It can even be installed with zero blind zone. SF4B-C Type 4 · PLe · SIL3 Mounts flush on aluminum frames The SFB-HC handy controller (optional) offers easy access to settings for a range of functionality. SF4B-C Width 20 Just mm Depth 27.4mm Easy mounting on aluminum frame Mounts ush on aluminum frames. With the pigtailed type, the large indicator is easy to see also from the side The SF4B-C series incorporates a large multi-purpose indicator (orange) positioned at workers' eye level. The indicator signals the presence of the light curtain, helping to prevent stoppages due to inadvertent interruption of its beams. The indicator can be used in a variety of applications, including as a muting indicator or operation indicator. The large multi-purpose indicator shines brightly through the plastic body to ensure exceptional visibility from the side. Buried mounting (side) The light curtain mounts flush, even in installations with buried mounting. > There is no risk of workpieces bumping into the light curtain. Rear mounting > The light curtain fits onto a 20 × 20mm alumi- num frame perfectly. 77 Technical specifications Pigtailed type (note 1, 2) Cable type Type Hand protection type Arm protection type Hand protection type Arm protection type Model no. SF4B-HpCA-J05 SF4B-ApCA-J05 SF4B-HpC SF4B-ApC Safety category Type 4, PLe, SIL3 Protective height 263.4 to 1943.4mm Sensing range 0 to 7m Beam pitch 20mm 40mm 20mm 40mm Object to be sensed Min. Ø 25mm (opaque) Min. Ø 45mm (opaque) Min. Ø 25mm (opaque) Min. Ø 45mm (opaque) Supply voltage 24V DC ±10% Response time ON OFF: max. 14ms / OFF ON: max. 90ms Control outputs OSSD1 and OSSD2 (2 x PNP or 2 x NPN open collector transistor, switchable), max. 200mA Emitting element Infrared LED, 850nm Protection IP65 (IEC) Ambient temperature -10 to +55°C Material Polycarbonate Connection method 12-wire PVC cable with connector, 0.5m 8-wire PVC cable, 5m Dimensions (HxWxD) Hx20x27.4mm (H= depending on protective height) Notes: 1.) For a system configuration, please contact your sales office or service hotline: +49 (0) 89-45354-2737 2.) Integrated muting function Hand protection type Protective height Model no. Pigtailed type (note) SF4B-H12CA-J05 SF4B-H16CA-J05 SF4B-H20CA-J05 SF4B-H24CA-J05 SF4B-H28CA-J05 SF4B-H32CA-J05 SF4B-H36CA-J05 SF4B-H40CA-J05 SF4B-H48CA-J05 SF4B-H56CA-J05 SF4B-H64CA-J05 SF4B-H72CA-J05 SF4B-H80CA-J05 SF4B-H88CA-J05 SF4B-H96CA-J05 Cable type SF4B-H12C SF4B-H16C SF4B-H20C SF4B-H24C SF4B-H28C SF4B-H32C SF4B-H36C SF4B-H40C SF4B-H48C SF4B-H56C SF4B-H64C SF4B-H72C SF4B-H80C SF4B-H88C SF4B-H96C Protective height (mm) 263.4 343.4 423.4 503.4 583.4 663.4 743.4 823.4 983.4 1143.4 1303.4 1463.4 1623.4 1783.4 1943.4 Installation height (mm) (note) 294.4 374.4 454.4 534.4 614.4 694.4 774.4 854.4 1014.4 1174.4 1334.4 1494.4 1654.4 1814.4 1974.4 SF4B-A8CA-J05 SF4B-A8C 343.4 SF4B-A12CA-J05 SF4B-A12C 503.4 SF4B-A16CA-J05 SF4B-A16C 663.4 SF4B-A20CA-J05 SF4B-A20C 823.4 Arm protection type SF4B-A24CA-J05 SF4B-A24C 983.4 SF4B-A28CA-J05 SF4B-A28C 1143.4 SF4B-A32CA-J05 SF4B-A32C 1303.4 SF4B-A36CA-J05 SF4B-A36C 1463.4 SF4B-A40CA-J05 SF4B-A40C 1623.4 SF4B-A44CA-J05 SF4B-A44C 1783.4 SF4B-A48CA-J05 SF4B-A48C 1943.4 Note: The installation height depends on the mounting bracket. Specifications with standard mounting bracket MS-SF4BC-1 374.4 534.4 694.4 854.4 1014.4 1174.4 1334.4 1494.4 1654.4 1814.4 1974.4 No. of beam axes 12 16 20 24 28 32 36 40 48 56 64 72 80 88 96 8 12 16 20 24 28 32 36 40 44 48 IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories SF4B-C 78 SAFETY SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors SF4C Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Large, built-in, multi-purpose LED indicators Large LED bars on each side of the light curtain provide a wide visibility indicator that can be customized for various applications by means of independent external inputs. The indicator can be used as an operation indicator (muting) or job indicator, etc. SF4C Finger/hand protection The SF4C series covers a sensing height of 160mm to 640mm. This is true for the finger and hand protection types (resolution up to 10 or 20mm). Type 4 · PLe · SIL3 Ultra-slim light curtain safeguards machines without sacrificing productivity IP67 (IEC) An IP67 (IEC) rating is achieved with an ultra-slim size for protection from environmental factors. Mutual interference is reduced without need for interference prevention lines The light curtain is equipped with the ELCA (Extraneous Light Check & Avoid) function, which has been proven to be strong against mutual interference. Because it automatically shifts the scanning time of the light curtain in order to avoid interference, it is not necessary to wire interference prevention lines between machinery. Green Red Green / Red series ent and streamlined i-purpose indicator" Job indicator Power source Light curtain SF4C Control circuit External input device (Lighting / blinking signal) Large multi-purpose indicator Input 1 Input 2 Can be used in a variety of applications for simplified equipment (large multi-purpose indicator) Wire-saving when connecting to safety devices. Contact outputs such as emergency stop switches or safety door switches can be connected to the light curtain. Also, by using the handy-controller SFC-HC, up to three sets of light curtains can be cascade connected for a consolidated safety output. A fast response time of 7ms* for all models A fast response time of 7ms* for all models regardless of the number of beam channels. This reduces the safety distance as well as the calculation work required for the safety distance among models with different beam channels. * When connecting safety sensors (light curtains, etc.) to the safety input, the response time will be the total time of connected units. Safety, productivity, and cost reduction [muting control function] The muting sensors and muting lamps can be connected directly to the light curtain. Furthermore, the large multi-purpose indicators can be used as muting lamps, which contribute to less wiring troubles, improvement of safety, productivity, and cost reduction. 79 Typical applications Use of internal muting lamp There is no need to buy and install a separate muting lamp. Selective muting area Separate muting control function for each beam channel. Industry first! Wire-saving when connecting to safety devices (safety input function). Technical specifications Type Finger protection type Hand protection type Model no. SF4C-Fp (note) SF4C-Hp Safety category Type 4, PLe, SIL3 Sensing height Depending on types (160 to 640mm) Sensing range 0 to 3m Resolution 10mm 20mm Object to be sensed Min. Ø 14mm (opaque) Min. Ø 25mm (opaque) Power supply 24VDC +10/15% Control outputs OSSD1 and OSSD2 (2x PNP or 2x NPN transistor outputs with open collector, switchable, max. 200mA) Response time ON OFF max. 9ms / OFF ON max. 90ms ON OFF max. 7ms / OFF ON max. 90ms Rated current consumption Max. 270mA (depending on type) Protection IP67 / IP65 (IEC) Ambient temperature 10 to +55°C Material Polycarbonate Connection method Cable, 5m or 0.5m with connector Dimensions (HxWxD) Hx13.2x30mm (H= protective height) Note: For a system configuration, please contact your sales office or service hotline: +49 89 45354-2737 Finger protection type Sensing height Cable type SF4C-F15 SF4C-F23 SF4C-F31 SF4C-F39 SF4C-F47 SF4C-F55 SF4C-F63 Model no. Cable with connector SF4C-F15-J05 SF4C-F23-J05 SF4C-F31-J05 SF4C-F39-J05 SF4C-F47-J05 SF4C-F55-J05 SF4C-F63-J05 Protective height (mm) 160 240 320 400 480 560 640 Installation height (mm) 160 240 320 400 480 560 640 No. of beam axes 15 23 31 39 47 55 63 Hand protection type Cable type SF4C-H8 SF4C-H12 SF4C-H16 SF4C-H20 SF4C-H24 SF4C-H28 SF4C-H32 Model no. Cable with connector SF4C-H8-J05 SF4C-H12-J05 SF4C-H16-J05 SF4C-H20-J05 SF4C-H24-J05 SF4C-H28-J05 SF4C-H32-J05 Protective height (mm) 160 240 320 400 480 560 640 Installation height (mm) 160 240 320 400 480 560 640 No. of beam axes 8 12 16 20 24 28 32 IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories SF4C 80 SAFETY SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors We also offer safety light curtains with Ionizers/ Electrostatic Sensors safety category 2 > Protective height: 160 to 1912mm > Accessories Sensing range: 0 to 13m > Response time: max. 15ms (ON OFF) > Arm and hand protection type > SF2B/SF2C Integrated status LEDs and display > Series connection without blind zone > Features: Interference suppression, series connection, emission halt function SF2B/SF2C Safety category 2 Excellent basic functions at a reasonable price Arm / foot protection type SF2B-A Min. sensing object ø 47mm (beam pitch 40mm) Hand protection type SF2B-H Min. sensing object ø 27mm (beam pitch 20mm) Typical applications Protection against malfunction caused by extraneous light Protection against mutual interference thanks to interference prevention Customization of automation products Panasonic has been perfecting the art of customization for over 10 years. Our experts work with customers, engineers, and purchasing and logistic departments to configure the most suitable customized solution in terms of product modification, packaging, labeling, pre-assembly and other features. High quality is assured thanks to multiple product tests that are conscientiously documented. Customized automation products can reduce your production costs, avoid production errors, and improve the quality of your final product. Customized cabling and Application specific interfacing setting of sensors Re-packaging for Sensors bundled with immediate customer use PLC/HMI as a solution Customer specific mounting of connectors on Panasonic Industry sensors https://industry.panasonic.eu 82 SAFETY SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors SG-P Non-contact safety door switch Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories SG-P High visibility Door switches installed on the inside of doors are difficult to see from the outside, so it is hard to check whether the doors are open or closed. The SG-P series units are highly visible from the outside, thus allowing reliable confirmation. The SG-P series eliminates the need to install switches on the outside of equipment, and it contributes to the simplification of equipment For frame-less doors Compact type: SG-P1010-p / SG-P2010-p No prior pairing Each switch body and actuator can be easily paired by bringing them close to each other and supplying power during the initial setup. When the units are cascade-connected, turning on the power completes the pairing procedures in a batch, thus reducing the man-hours required for the setup. High level coded actuator Intentional deactivation of a safety switch can lead to serious accidents. The SG-P series with high level coded actuators models detect only the paired actuators. They support the ISO 14119 coding level and prevent intentional deactivation of safety switches. 30 units in series Previously, when cascade connection was used, extra manhours were required for connecting wires to the switches for linked operation. When the SG-P series is installed, the standard model serves as a master unit and outputs safety signals (OSSD1 / 2) in a batch. No extra wiring work is necessary for cascade connection of the sub units that serve as slave units. A maximum of 30 units can be connected, thus contributing to the reduction of equipment wiring work. Each master unit can be connected with up to 29 slave units. Slave (1) Slave (29) Master Safety controller Switch bodies Automatic pairing during initial power-on process Power supply unit Actuators 83 Large and bright indicators notify the open / Closed conditions of machine room doors When any of the safety switches connected in series enters a non-detecting state, its indicator lights up in red and the indicators of all other safety switches flash in green to notify the operator. IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories SG-P Open door is indicated by the indicator lit up in bright red. Indicators of switches on the other (closed) doors linked to the open door flash in green to indicate that the machine is in an unsafe condition. Technical specifications Type Model no. Applicable standards Operating distance Power supply voltage Output Response time Material Connection method Degree of protection Pollution degree Dimensions (HxWxD) Master, PNP output Master, NPN output Slave SG-P-M-P SG-P-M-N SG-P-S ISO 13849-1 (Category 4, PLe), IEC 61508-1 to 7 (SIL3), IEC 62061 (SIL3), IEC 60947-5-3, ISO 14119, EN 60947-5-3, EN 300 330, EN 301 489-1 Sao (OFFON): 5mm, Sar (ONOFF): 15mm 24V DC 2 x PNP open-collector transistor, max. 100mA 2 x NPN open-collector transistor, max. 100mA For single unit: ONOFF max. 100ms, OFFON max. 100ms For multiple units: Time for single unit + 5ms × (number of connected units - 1) Switch body: PBT, PC, stainless steel, Silicone rubber. Actuator: PBT, PC (only visible type) 6core cab tire cable, 5m 4core cab tire cable, 3m IP65 (IEC) 3 inside 2 Compact type: 93x25x15mm; actuator: 56x13x15mm Visible type: 93x25x15mm; actuator: 52x32x15mm 84 SAFETY SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors ST4 Type 4 · PLe · SIL3 Cascadable thru-beam sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Series connection of six sets of sensor heads to one controller The concept of connecting six sets of sensor heads to one controller in series offers you maximum flexibility to solve your safety application. Beam axis alignment and operation confirmation ST4 The beam interruption indicator is incorporated in both the emitter and receiver. This indicator can be used not only to confirm operation but also to align the beam axis. Compact sensor head saves space The size of this type 4 long sensing range type is similar to general purpose photoelectric sensors. IP67 (IEC) The sensor heads can be used safely even in rough production environments. Interference prevention The emission amount adjuster can be used to prevent interference to the surrounding sensors. Supports both PNP and NPN polarities A single unit supports both PNP and NPN polarities, easing stock management. Verzweigung An Steuereinheit Verlängerungskabel Emission amount adjustment function 85 Typical applications Protection for long sensing ranges Guard areas up to 15m in length, for example where protective fences are difficult to install. Protection for small openings For small openings where light curtains do not fit, ST4 sensor heads ensure safety. Protection against nonauthorized entry Sensor heads can be mounted flexibly and muting control implemented easily. Technical specifications Sensor heads Type Cable length 0.2m Cable length 1.0m With sensitivity adjuster With sensitivity adjuster Model no. ST4-A1-J02 ST4-A1-J02V ST4-A1-J1 ST4-A1-J1V Safety category Type 4, PLe, SIL3 Cascading Up to 6 pieces to one controller Power supply Supplied from controller (ST4-C11 or ST4-C12EX) Sensing range 0 to 15m Object to be sensed Min. ø 9mm (opaque) Emitting element Infrared LED Protection IP67 (IEC) Ambient temperature 10 to +55°C Material Enclosure: PBT/Cover: acrylic Connection method Cable with connector enclosed, 0.2m Cable with connector enclosed, 1.0m Dimensions (HxWxD) 31x14x28mm Control device Type Standard High-functional Model no. ST4-C11 ST4-C12EX Safety category Type 4, PLe, SIL3 Power supply 24VDC +10% / 15% Control outputs OSSD1 and OSSD2 (2x PNP or 2x NPN transistor outputs with open collector, switchable, max. 200mA) Response time ON OFF: max. 25ms, OFF ON: max. 140ms Current consumption Max. 100mA (excluding sensor heads) Max. 120mA (excluding sensor heads) Protection Enclosure: IP40 (IEC), Terminal: IP20 (IEC) Ambient temperature 10 to +55°C Material Enclosure: ABS Connection method Connector (sensors), terminal block Dimensions (HxWxD) 130x46x80mm Note: For a system configuration, please contact your sales office or service hotline: +49 89 45354-2737 IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories ST4 86 SAFETY SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Space-saving and easy to wire Ionizers/ Electrostatic Sensors > One SF-C21 can do the work of four safety relay units. Accessories Input: 10 points / Output: 8 points > Compact size (height 97 mm × width 45 mm) SF-C21 Absolutely no programming skills required > Eight preset logics, safety-certified and compatible to control category 4 PLe > The OFF delay time can be easily set by turning the rotary switch > Password protection prevents inadvertent changes to the logic SF-C21 Control unit for multiple safety solutions Application-based customization > Easy to create reliable safety circuit > Configurator SF-C software to build own safety circuits Easy to monitor status with a PLC > Four auxiliary outputs are provided > RS-485 communications (MODBUS RTU) Technical specifications Model. no. Safety standards EMC standards Related standards Safety input Safety control output Auxiliary output Logic selection function Communication SF-C21 IEC 61508-1 to 7, EN 61508-1 to 7(SIL3), ISO 13849-1 (up to Category 4, PLe), IEC 61131-2, IEC 61010-2-201, IEC 62061(SILCL3), UL 61010-1, UL 61010-2-201 IEC 61000-6-2, IEC 61326-3-1, EN 55011 IEC 60947-1, IEC 60947-5-1, IEC 60947-5-2, IEC 60947-5-5, IEC 60947-5-8, IEC 61496-1, IEC TS 62046, ISO 13851 2 × 4 inputs (ON OFF max. 0.7ms; OFF ON max. 10ms) PNP open-collector transistor with 2 outputs x 2 (ON OFF max. 10ms; OFF ON max. 100ms) PNP open-collector transistor with 1 output × 4 (Any of the auxiliary outputs can be customized using the software tool) No. 0: Customization control No. 2: Parallel muting control No. 4: Partial stop control 1 No. 6: Two-hand control No. 8: Operation mode selection control No. 1: Overall stop control No. 3: Sequential muting control No. 5: Partial stop control 2 No. 7: OR control RS-485: Detachable spring-cage terminal block, USB: Mini-B male Note: We also offer the safety control unit SF-C10 series (see next page), which is ideal for controlling Panasonic's safety light curtain, because its connectors make wiring easier 87 SF-C10 Less setup time for safety light curtains Features Supports both PNP and NPN polarities A single unit can be used for PNP / NPN input switching, reducing the number of parts that need to be registered. Slim design 22.5mm thickness for insertion even into narrow spaces inside panels. SF-C13 Removable terminal blocks reduce maintenance time SF-C11 Removable terminal blocks are used. This reduces the work required for reconnecting wiring during maintenance 22.5mm IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories SF-C10 Removable! Uses a spring method Metal enclosure with an IP65 (IEC) protective structure The strong metal enclosure has a built-in safety SF-C12 relay. It has an IP65 protective structure so that it can be set up individually without needing to be inserted into a control panel. Three safety circuit systems packaged into SF-C14EX a single unit! The unit has three different built-in safety circuits: Output circuit of the safety light curtain, muting safety circuit, and emergency stop safety circuit. Connector in metal housing 88 PRESSURE & FLOW SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors DP-0 Compact and easy-to-use pressure sensor Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories DP-0 RUN and detailed setting mode Pressure sensors of the DP-0 series operate in two different modes. RUN mode is used for quick access to settings like threshold values, zero point, and key lock functions. The detailed setting mode offers additional settings such as selecting the pressure unit or the response time. The two modes together help to achieve an optimum sensor performance. Detailed setting mode Pressure unit setting mode RUN mode Operation setting mode NO / NC setting mode · Threshold value setting · Zero point adjustment · Key lock setting / release Response time setting mode Display color setting mode Settings initializing mode Functional design The unit body is completely black to make the LCD display easier to see. The keys offer a firm and crisp clicking feel, thus making operating the sensor smooth and reliable. Compact & lightweight design The unit body measures only 24.9mm in depth, which allows installation in a narrow space. The body weighs only 25g. The low weight is very advantageous if the sensor has to be mounted on moving parts, e.g. robot arms. Approx. 25 g 24,9mm Env. 40g 42,5mm Low and high pressure type available The low pressure type can be used with positive or negative pressure. It is ideal for suction applications where it indicates malfunctions due to pressure changes. The high pressure type is suitable for positive pressure of up to 1MPa. It is ideal for applications where a reference pressure needs to be checked. -100 kPa 0 kPa Low pressure type DP-001 High pressure type 100 kPa DP-002 1 MPa Typical applications Monitoring suction pressure on electronic components Checking reference pressure Technical specifications Type Low pressure type High pressure type PNP Model no. NPN DP-001-P DP-001 DP-002-P DP-002 Type of pressure Gauge pressure Rated pressure range (note 2) -1 to +1bar (-100 to +100kPa) 0 to +10bar (0 to 1MPa) Pressure withstandability 5bar (500kPa) 15bar (1.5MPa) Applicable fluid Non-corrosive gas Supply voltage 12 to 24V DC ±10% Output 3x NPN or PNP transistor, max. 50mA Response time 2.5, 25, 250ms (switchable) Pressure port M5 female thread Degree of protection IP40 Ambient temperature -10 to +50°C Material Resin body type Connection method Connector (note 1) Dimensions (HxWxD) 30x30x25mm Accessories CN-14A-C2 connector-attached cable 2m, 1 pc Notes: 1.) The 2m cable CN-14A-C2 is included 2.) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20°C. Reference pressure 1atm 89 IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories DP-0 90 PRESSURE & FLOW SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors DP-100 Pressure sensors with dual display Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors The current and threshold values can be checked at the Ionizers/ Electrostatic Sensors same time! Accessories DP-100 Comparative Output 1 Operation indicator Comparative Output 2 Operation indicator Multi-function type: Analog voltage output Operation indicator Main display Sub display Easy-to-read digital display! A clear 12-segment make numbers and letters easy to read. High performance Mode selection key Increment key Decrement key Dual display allows direct setting of threshold value Equipped with a 30mm square compact dual display. Because the current and threshold value can be checked at the same time, the threshold value can be set and checked smoothly without having to switch screen modes. 3-color display (red, green, orange) Current value Threshold value The main display color changes depending on the output status (ON/OFF operation) and while settings are being made. The sensor status can therefore be understood easily, and operating errors can be reduced. The low pressure type displays measure- For low pressure ments in 0.1kPa at a resolution of 1/2000 and has a response time of 2.5ms (variable up to 5000ms). Moreover it boasts ±0.5% F.S. temperature characteristics and ±0.1% F.S. repeatability. Copy function saves time and reduces human error Sensors can be connected to a master sensor one by one and settings copied to them. When making the same settings for mul- Details transmitted Details received Details copied tiple sensors, this prevents setting errors from occurring and reduces the number of changes required to instruction manuals when equipment designs are changed. Equipped with auto-reference and remote zero-adjustment functions A precise pressure management is possible If the reference pressure of the device changes, the auto-reference function partially shifts the comparative output judgment level by the amount that the reference pressure shifts and resets the display value to zero. These functions are ideal for places where the reference pressure fluctuates wildly, or where fine settings are desired. Main display OFF: Green (or Red) ON: Red (or Green) Set: Orange During normal operation During setting 91 Typical applications Confirming suction of electronic component Confirming reference pressure Leak test for PET bottles Technical specifications Cable types Type Standard High-function controller Model no. Asian DP-101 (note 1) DP-102 DP-101A DP-102A European DP-101-E-P DP-102-E-P DP-101A-E-P DP-102A-E-P M5 female thread Short porttype Rated pressure range (note 3) Applicable fluid DP-101-M-P 1bar to +1bar (-100.0 to +100.0kPa) DP-102-M-P DP-101A-M-P 1bar to +10bar (-0.1 to +1.0MPa) 1bar to +1bar (-100.0 to +100.0kPa) Non-corrosive gas DP-102A-M-P 1bar to +10bar (-0.1 to +1.0MPa) Power supply 12 to 24VDC ±10% Output PNP / NPN open-collector transistor, max. 100mA Analog output 4 to 20mA/0 to 10V Response time 2.5ms, 5ms, 10ms, 25ms, 50ms, 100ms, 250ms, 500ms, 1000ms, 5000ms, selectable by key operation Display Pressure port Connection method 3-color LCD display, 12 segments, 4 digits Asian: M5 female thread + R (PT) 1/8 male thread European: M5 female thread + G 1/8 male thread Connector (note 2) Dimensions (HxWxD) 30x30x42.5mm Accessories CN-14A-C2 Connector attached cable 2m, 1 pc. Notes: 1.) Suffix-E = Air supply M5 female thread and G 1/8 male thread Suffix-M = M5 short port type Suffix-P = PNP output 2.) CN-14A-C2 cable 2m is included in delivery 3.) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20°C. Reference pressure=1atm M8 connector types Type Standard Multifunction Model no. Rated pressure range (note 1) Applicable fluid DP-111-E-P-J 1bar to +1bar (-100.0 to +100.0kPa) DP-112-E-P-J DP-111A-E-P-J 1bar to +10bar (-0.1 to +1.0MPa) 1bar to +1bar (-100.0 to +100.0kPa) Non-corrosive gas DP-112A-E-P-J 1bar to +10bar (-0.1 to +1.0MPa) Power supply 12 to 24VDC ±10% Output PNP open-collector transistor, max. 100mA Response time 2.5ms, 5ms, 10ms, 25ms, 50ms, 100ms, 250ms, 500ms, 1000ms, 5000ms, selectable by key operation Analog volt. output / external input -- Incorporated Ambient temperature 10 to +50°C Pressure port Material Connection method G1/8 male thread + M5 female thread Enclosure: PBT (glass fiber reinforced); LCD display: Acrylic; Pressure port: Stainless steel (SUS303); Thread part: Brass (nickel plated); Switch part: Silicone rubber, M8 connector part: Nickel-plated brass/brass gold plated contacts M8 connector (note 2) Dimensions (HxWxD) 30x30x47.5mm Accessories Unit selection plate: 1 set Notes: 1.) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20°C. Reference pressure=1atm 2.) Cable not included in delivery, please select under accessories (page 129) IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories DP-100 92 PRESSURE & FLOW SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Automatic sensor head recognition The controller automatically recognizes sensor heads when they are connected, even if their rated pressure ranges are different. Accessories Dual display and direct setting DPC-100/ DPH-100 The dual display allows you to check current and threshold values simultaneously. To facilitate setting operations, three modes have been devised: > "RUN mode" is for operation settings that are carried out daily > "MENU SETTING mode" for basic settings > "PRO mode" for special and detailed settings Controllers can be connected to a master controller one by one, and the master can transmit settings to the slave controllers. This significantly reduces time required when you need to make multiple, identical settings, or during production changeovers. Moreover, it reduces the possibility for error in such cases. DPC-100/ DPH-100 Single-axis type digital pressure sensor with optional dual 3-color display Direct installation using a hexagonal wrench The sensor head is tightened with a hexagonal wrench, making installation easy, especially in tight spaces. Typical applications Leak test Reference pressure checking Monitoring vacuum pressure 93 Technical specifications Sensor heads Type Standard ±1bar (±100kPa ) Model no. DPH-101 DPH-101-M3 DPH-101-M5 Positive pressure +1bar (+1.0MPa) DPH-102 DPH-102-M5 DPH-103 Vacuum pressure 1bar (-100kPa) DPH-103-M3 DPH-103-M5 Type of pressure Gauge pressure (note 1) Rated pressure 1 to +1bar (-100.0 to +100.0kPa) 0 to 10bar (0 to +1.0MPa) 0 to -1bar (0 to -100.0kPa) Pressure resistance 5bar (500kPa) 15bar (1.5MPa) 5bar (500kPa) Applicable fluid Air, non-corrosive gas Power supply 12 to 24VDC ±10% Analog voltage output Output voltage: 1 to 5V (overrated pressure range) Protection IP40 (IEC) Ambient temperature Pressure port Rated current consumption (without load) Material Connection method 0 to +50°C DPH-10p: R1/8 male thread + M5 female thread, DPH-10p-M3: M3 male thread (for installing gasket) DPH-10p-M5: M5 male thread (for installing gasket) Max. 15mA Front case: PBT, Rear case: PBT (glass fiber reinforced), Pressure port: stainless steel (SUS303), O-ring: NBR, Pressure element silicon diaphragm, PPS Cable, 2m with attached connector Dimensions (HxWxD) 23x13.2x 23.4mm 17x10x 20.5mm 17.5x10x 20.5mm 23x13.2x 23.4mm 17.5x10x 20.5mm 23x13.2x 23.4mm 17x10x 20.5mm 17.5x 10x 20.5mm IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories DPC-100/ DPH-100 Accessories Connector (e-CON): 1 pc. Controller Type Model no. Applicable sensor head Rated pressure Power supply Output Power consumption Ambient temperature Material Protection Connection method Dimensions (HxWxD) Accessories Notes: 1.) Reference pressure 1atm 2.) CN-66A-C2 cable 2m is included in delivery NPN output PNP output DPC-101 DPC-101-P DPH-101p, DPH-102p, DPH-103p Compound pressure type: 1 to +1bar (-100.0 to +100.0kPa) Positive pressure: 0 to 10bar (0 to +1.0MPa) Vacuum pressure: 0 to 1bar (0 to -100.0kPa) 12 to 24VDC ±10% PNP or NPN open-collector transistor, max. 100mA Normal operation: max. 960mW (Current consumption max. 40mA at 24V supply voltage) ECO mode (STD): max. 720mW (Current consumption max. 30mA at 24V supply voltage) ECO mode (FULL): max. 600mW (Current consumption max. 25mA at 24V supply voltage) Excluding the current consumption of sensor head and analog output current 10 to +50°C Enclosure: PBT (glass fiber reinforced), LCD display: Acrylic, Threaded part: Brass (nickel plated) Switch part: Silicon rubber IP40 (IEC) Connector (note 2) 30x30x29.2mm CN-66A-C2 Cable (2m) with attached connector Pressure unit label: 1 set 94 PRESSURE & FLOW SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Head-separated sensor The sensor head is very flexible and can be used with or without the control unit. High-precision measuring is possible with an analog current output of 1 to 5V and extremely accurate detection of 1% F.S. DPC-L100/ DPH-L100 Stainless steel construction The enclosure is made of stainless steel and hence suitable in a wide range of appliatons. An oil-less, hermetically enclosed diaphragm prevents the fluids from being polluted. An integrated throttle controls the pressure and prevents damage by excess pressure. DPC-L100 / DPH-L100 Powerful and simple high-precision detection of fluid and air pressure Main circuit Piezo-electric conversion Stainless steel diaphragm (Integrated pressure transducer) SUS630 Pressure port SUS304 Wide pressure ranges Various sensor heads for different pressure ranges from vacuum pressure to positive pressure (up to 500bar/50MPa) are available. With the control unit, the pressure range can be output linearly as voltage or current. Throttle SUSXM7 DPH-L113V -0.1 to +1.0 MPa DPH-L113 0 to +1.0 MPa DPH-L133 0 to +3.5 MPa DPH-L114 0 to +10 MPa DPH-L154 0 to +50 MPa Color continuum For use with pressurized air and other media (air mixed with water or oil) Air Water For use with pressurized fluid and other media (water or chemical solutions) Oil For use with pressurized oil and other media 0.1 0 +1 +3.5 Pressure range (MPa) +10 +50 95 Typical applications Transport of glass sheets after washing (pressurized air containing water droplets) Management of plastic filling machine pressure (pressurized fluid) Management of press pressure (pressurized oil) Technical specifications Sensor heads Type Model no. Rated pressure Applicable fluid Power supply Analog voltage output Response time Medium temperature range Pressure port Protection Ambient temperature Material Connection method Dimensions (ØxD) Accessories Compound pressure type Positive pressure DPH-L113V DPH-L113 DPH-L133 DPH-L114 DPH-L154 -1 to +10bar (-0.1 to +1.0MPa) 0 to +10bar (0 to +1.0MPa) 0 to +35bar (0 to +3.5MPa) 0 to +100bar (0 to +10.0MPa) 0 to +500bar (0 to +50.0MPa) Gases and fluids that do not corrode SUS630, SUS304, or SUSXM7 9 to 36VDC 1 to 5VDC overrated pressure range, Accuracy (note): ±1% F.S. (at 23±2°C) Max. 1ms 20 to +70°C 20 to +125°C R1/4 male thread ( (throttle embedded) IP67 (IEC) 20 to +70°C 20 to +80°C Diaphragm: stainless steel (SUS630); mounting threaded part: stainless steel (SUS304), Throttle: Stainless steel (SUSXM7) Cable with connector enclosed, 2m 24.3x73mm e- CON connector 1pc. Note: Accuracy including linearity, hysteresis and repeatability Controller Type NPN output DPC-L101 Model no. PNP output DPC-L101P Applicable sensor head DPH-L113V DPH-L113 DPH-L133 DPH-L114 DPH-L154 Rated pressure -1 to +10bar (-0.1 to +1.0MPa) 0 to +10bar (0 to +1.0MPa) 0 to +35bar (0 to +3.5MPa) 0 to +100bar (0 to +10.0MPa) 0 to +500bar (0 to +50.0MPa) Power supply 12 to 24VDC ±10% Output Analog voltage output Response time 2 PNP or NPN open-collector transistors, max. 50mA Output voltage 1 to 5V Zero point: within 1V ± 5% F.S. (note 1) Span: 4V ± 0.5% F.S. Linearity: within ±0.1% F.S. Load impedance: approx. 1k Output current: 4 to 20mA Zero point: within 4mA ±1.0% F.S. (note 2) Span: 16mA ± 1.5% F.S. Linearity: within ±0.1% F.S. Load resistance: max. 250k 5ms,10ms, 25ms, 50ms, 100ms, 250ms, 500ms, 1000ms, 5000ms selectable by key operation Protection IP40 (IEC) Ambient temperature 10 to +50°C Material Enclosure: PBT, LCD display: acrylic; Mounting threaded part: brass (nickel plated), Switch part: silicone rubber Connection method Connector Dimensions (HxWxD) 30x30x25.5mm Accessories CN-66A-C2 Cable, 2m with connector attached, Pressure unit label: 1 set Notes: 1.) DPH-L113V: Zeropoint within 1.364V ± 0.5% F.S. 2.) DPH-L113V: Zeropoint within 5.455mA ±1.0% F.S. IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories DPC-L100/ DPH-L100 96 PRESSURE & FLOW SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors FM-200 Flow sensor with dual display Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Easy-to-read, 2-color display with sub display The 2-color digital display lets you check the operation status of the FM-200 at a glance. The use of color makes it easy to distinguish between measurement values and functionality. High precision of ±3% F.S. Micro Electro Mechanical System (MEMS) technology allows the FM-200 sensor to be mounted on a silicon sensor chip. The advantages are as follows: an extremely small heat capacity, a high precision of ±3% F.S., and a high-speed response time. Two temperature sensors, one on either side of the heater, detect heat distribution and make bidirectional detection possible. One sensor for both intake and exhaust A single sensor can detect flows bidirectionally, or the forward or reverse direction only, making it suitable for a variety of applications. Analog voltage output 1 to 5V analog voltage output is incorporated. Integrated output and pulse output mode incorporated The FM-200 series can control and manage flows for a wide variety of applications. The integrated output mode will turn the output ON or OFF at the specified integrated value, allowing you to control air blowing volumes, for example. In pulse output mode, a pulse is generated once at each specified integrated value, allowing you to monitor the amount of air consumed, for example with an EcoPOWER METER. Integrated value reset function In integrated mode, values accumulate over time. As soon as the limit is reached, the digital output is set. This limit value can also be reset by an external input. Rattle prevention function To prevent rattling from rapid changes in flow or from noise, the response time can be set to one of seven steps, from 50ms to approximately 1500ms. The display update period can be changed to 250ms, 500ms or 1000ms in order to eliminate flickering. ECO mode In ECO mode, the backlight is turned off after approximately one minute if no operation occurs to reduce power consumption. Typical applications Checking suction Checking seating Monitoring air blowing and purge gas 97 Technical specifications Type Model no. PNP output NPN output Full scale flow rate Display range Setting and display resolution Rated pressure Pressure resistance Applicable fluid Linearity Response time Power supply Output Output modes Analog voltage output Rated current consumption (without load) Protection Ambient temperature Material Connection method Dimensions (HxWxD) Temperature characteristics Port size Type Model no. PNP output NPN output Full scale flow rate Display range Setting and display resolution Rated pressure Pressure resistance Applicable fluid Linearity Response time Power supply Output Output modes Analog voltage output Rated current consumption (without load) Protection Ambient temperature Material Connection method Dimensions (HxWxD) Temperature characteristics Port size Accessories Plastic housing FM-252-4-P FM-213-4-P FM-253-4-P FM-214-4-P FM-254-8-P FM-215-8-P FM-252-4 FM-213-4 FM-253-4 FM-214-4 FM-254-8 FM-215-8 500ml/min 1.0l/min 5l/min 10l/min 50l/min 100l/min ±9999999ml ±99999.99l ±999999.9l 1ml/min 0.01l/min 0.1l/min 0.9 to +7bar (0.09 to +0.7MPa) 10bar (1.0MPa) Clean air, compressed air, nitrogen gas 3%F.S. 50ms to 1.5s selectable 12 to 24VDC ±10% PNP or NPN open-collector transistor, max. 50mA Output OFF mode, window comparator mode, hysteresis mode, integrated output mode, integrated pulse output mode 1.0 to 5.0V Normal mode: max. 60mA, ECO mode: max. 40mA IP40 (IEC) 0 to +50°C Plastic Cable with connector enclosed, 1m 37x55x17mm Within ±0.2% F.S./°C (+15°C to +35°C) ø4 push-in 43x55x17mm ø8 push-in Aluminum housing FM-255-AR2-P FM-255-AG2-P FM-216-AR2-P FM-216-AG2-P FM-255-AR2 FM-216-AR2 500l/min 1000l/min ±999999.9l 1l/min 0.9 to +7bar (-0.09 to +0.7MPa) 10bar (1.0MPa) Clean air, compressed air, nitrogen gas 3%F.S. 50ms to 1.5s selectable 12 to 24VDC ±10% PNP or NPN open-collector transistor, max. 50mA Output OFF mode, window comparator mode, hysteresis mode, integrated output mode, integrated pulse output mode 1.0 to 5.0V Normal mode: max. 60mA, ECO mode: max. 40mA Rc½ female thread IP40 (IEC) 0 to +50°C Resin/Aluminum body type Cable with connector enclosed, 1m 50x80x30mm Within ±0.2% F.S./°C (+15°C to +35°C) G½ female thread Rc½ female thread CN-F15-C1 cable, 1m with attached connector G½ female thread IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories FM-200 98 INDUCTIVE PROXIMITY SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors High Response frequency Ionizers/ Electrostatic Sensors Accessories GX-300 The GX-303S boasts a response frequency of 5kHz and realizes high speed response.The response frequency of other sensor models has been also improved by up to 4 times as compared to our conventional models. Since the GX-300 series responds quickly to sensor ON/ OFF judgement, it works well with a high-speed application and contributes to the reduction of equipment cycle time. GX-300 Cylindrical Inductive sensor with IO-Link Type Response frequency of our conventional model ø3mm ø4 mm* Conventional model: ø3.8 / ø4.4mm ø5.4 mm -- 1kHz 1.5kHz Significant improvement over conventional models! 4 times 2.7 times Response frequency of GX-300 standard sensing range type 5kHz (GX-303S) 4kHz (GX-304S) 4kHz (GX-305S) M5 threaded 1kHz 4 times 4kHz (GX-305M) M8 threaded 1kHz 2 times 2kHz (GX-308M) M12 threaded 450Hz 3.3 times 1,500Hz (GX-312M) M18 threaded 300Hz 2 times 600Hz (GX-318M) Indicator visible 360 degrees In the small-diameter type sensors, the indicator light is visible at 4 locations. In the M8 and larger threaded type sensors, the high-brightness indicator and the resin containing dispersing agent allow the confirmation of the indicator from any angle to facilitate the cumbersome adjustment of installation position. The green indicator flashes during IO-Link communication. Extensive line up The GX-300 series includes 310 different sensor models. We offer various types of sensor models such as the cable type (cable length: 2m or 5m) connector type and pigtailed type. Furthermore, we can supply bending-resistant cable type models (cable length : 2m or 5m), which are suitable for installation on moving parts. Small-diameter type Indicator light visible at 4 locations M8 / M12 / M18 / M30 threaded type toryvdisiriebcletion Cable type Connector type Pigtailed type fro Imnadinca 99 IOT ready With the implemented IO-Link technology network integration is easy. The IO-Link models can be used as normal digital PNP output sensors or providing information about the sensor level Typical applications Positioning processing equipment or the current sensor condition via IO-Link interface. This is perfect for predictive maintenance and applications with higher expectations. IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Dog GX-308MK Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Technical specifications DC 3-wire type (Small-diameter, shielded type) Type Model No. (note 2) Normally Open Normally closed Rated sensing distance Stable sensing distance (note 3) Standard sensing object (note 7) Hysteresis Supply voltage (note 4) Current consumption Control output Response Frequency (note 5) Protection Ambient temperature Dimension (HxWxD) Material Connection method (note 6) GX-303S-A- GX-303S-B- 0.8mm 0 to 0.56mm 3x3mm 5kHZ Ø3x27.1mm Non-threaded type GX-304S-A- GX-305S-A- GX-304S-B- GX-305S-B- 1.0mm 1.2mm 0 to 0.84mm 0 to 0.7mm 4x4mm 5.4x5.4mm Max. 15% of measurement distance 10-30V DC ±10% (note1) max. 10mA PNP / NPN open-collector transistor, 100mA (note2) 4kHz IP67 (IEC) -25 to +70°C Ø4x25.1mm Ø5.4x25.1mm Case: Stainless steel (SUS303) [Brass (Nickel plated) for GX-305S], Sensing part: Heat-resistant ABS Cable, 2m or 5m; M12 connector type; pigtail type Threaded type GX-305M-A- GX-305M-B- 1.0mm 0 to 0.84mm 4x4mm M8x25.1mm Notes: 1.) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23°C 2.) Suffix -N =NPN type, Suffix -P = PNP type 3.) The specified stable sensing distance is the range in which the sensor works reliably even in case of deviations in temperature or voltage 4.) When used at a power of 12 V, the product is less susceptible to the effects of internal self-heat generation and therefore a more stable repeat accuracy can be obtained 5.) The response frequency is an average value. 6.) Suffix -C5 = 5m cable Suffix -J = Pigtail 0.3m with M12 connector Suffix -Z = M12 connector type 7.) Standard sensing object = sheet steel, thickness: 1mm GX-300 100 INDUCTIVE PROXIMITY SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories DC 3-wire type (Shielded type) Type Model No. (note 2) Rated sensing distance Stable sensing distance (note 3) Standard sensing object (note 7) Hysteresis Supply voltage (note 4) Current consumption Control output Switching and communication line (C/Q) (note 8) Response Frequency (note 5) Protection Ambient temperature Dimension (HxWxD) Normally Open Normally closed Communication specification Baud rate Process data Transmission cycle time Material Connection method (note 6) GX-308M-A- GX-308M-B- 1.5mm 0 to 1.2mm 8x8mm 2kHZ M8x37.8mm Threaded type GX-312M-A- GX-318M-A- GX-330M-A- GX-312M-B- GX-318M-B- GX-330M-B- 2.0mm 5mm 10mm 0 to 1.6 mm 0 to 4 mm 0 to 8mm 12x12mm 18x18mm 30x30mm Max. 10% of measurement distance 10-30V DC ±10% (note1) max. 16mA PNP / NPN open-collector transistor, 200mA (note 2) IO-Link specification V1.1 COM3 (230.4kbit/s) PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE2_2) 0.4ms 1.5kHz 0.6kHz 0.4kHz IP67 (IEC) -40 to +85°C M12x47.1mm M18x55.3mm M30x60.3mm Case: Nickel-plated brass [stainless steel (SUS303) for GX-308M(K)-], Sensing part: Polybutylene terephthalate (PBT) Cable, 2m or 5m; M12 connector type; pigtail type GX-300 Notes: 1.) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23°C 2.) Suffix -N = NPN type, Suffix -P = PNP type 3.) The specified stable sensing distance is the range in which the sensor works reliably even in case of deviations in temperature or voltage 4.) When used at a power of 12 V, the product is less susceptible to the effects of internal self-heat generation and therefore a more stable repeat accuracy can be obtained 5.) The response frequency is an average value. 6.) Suffix -C5 = 5m cable / Suffix -J = Pigtail 0.3m with M12 connector / Suffix-Z = M12 connector type 7.) Standard sensing object = sheet steel, thickness: 1mm 8.) IO-Link type only integrated in Normally open and PNP types = GX-3M-A-P DC 3-wire type (Non-shielded type) Type Model No. (note 2) Rated sensing distance Stable sensing distance (note 3) Standard sensing object (note 7) Hysteresis Supply voltage (note 4) Current consumption Control output Switching and communication line (C/Q) (note 8) Response Frequency (note 5) Protection Ambient temperature Dimension (HxWxD) Normally Open Normally closed Communication specification Baud rate Process data Transmission cycle time Material Connection method (note 6) Threaded type GX-308ML-A- GX-312ML-A- GX-318ML-A- GX-308ML-B- GX-312ML-B- GX-318ML-B- 2.0mm 5.0mm 10mm 0 to 1.6 mm 0 to 4 mm 0 to 8 mm 8x8mm 12x12mm 18x18mm Max. 10% of measurement distance 10-30V DC ±10% (note1) max. 16mA PNP / NPN open-collector transistor, 200mA (note 2) IO-Link specification V1.1 COM3 (230.4kbit/s) PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE2_2) 0.4ms 1kHZ 0.8kHz 0.4kHz IP67 (IEC) -40 to +85°C M8x37.8mm M12x47.1mm M18x55.3mm Case:Nickel-plated brass [stainless steel (SUS303) for GX-308ML(K)-], Sensing part: Polybutylene terephthalate (PBT) Cable, 2m or 5m; M12 connector type; pigtail type GX-330ML-A- GX-330ML-B- 18mm 0 to 14.4 mm 30x30mm 0.1kHz M30x60.3mm Notes: 1.) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23°C 2.) Suffix -N = NPN type, Suffix -P = PNP type 3.) The specified stable sensing distance is the range in which the sensor works reliably even in case of deviations in temperature or voltage 4.) When used at a power of 12 V, the product is less susceptible to the effects of internal self-heat generation and therefore a more stable repeat accuracy can be obtained 5.) The response frequency is an average value. 6.) Suffix -C5 = 5m cable / Suffix -J = Pigtail 0.3m with M12 connector / Suffix -Z = M12 connector type 7.) Standard sensing object = sheet steel, thickness: 1mm 8.) IO-Link type only integrated in Normally open and PNP types = GX-3ML-A-P 101 DC 3-wire type (Shielded type, long sensing range) Type Model No. (note 2) Rated sensing distance Stable sensing distance (note 3) Standard sensing object (note 7) Hysteresis Supply voltage (note 4) Current consumption Control output Switching and communication line (C/Q) (note 8) Response Frequency (note 5) Protection Ambient temperature Dimension (HxWxD) Material Connection method (note 6) Normally Open Normally closed Communication specification Baud rate Process data Transmission cycle time Threaded type GX-308MK-A- GX-312MK-A- GX-318MK-A- GX-330MK-A- GX-308MK-B- GX-312MK-B- GX-318MK-B- GX-330MK-B- 2.0mm 4.0mm 8mm 15mm 0 to 1.6mm 0 to 3.2mm 0 to 6.4mm 0 to 12mm 8x8mm 12x12mm 18x18mm 30x30mm Max. 15% of measurement distance 10-30V DC ±10% (note1) max. 16mA PNP / NPN open-collector transistor, 200mA (note 2) IO-Link specification V1.1 COM3 (230.4kbit/s) PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE2_2) 0.4ms 1.5kHZ 1.kHz 0.5kHz 0.25kHz IP67 (IEC) -40 to +85°C M8x37.8mm M12x47.1mm M18x55.3mm M30x60.3mm Case: Nickel-plated brass [stainless steel (SUS303) for GX-308M(K)-] Sensing part: Polybutylene terephthalate (PBT) Cable, 2m or 5m; M12 connector type; pigtail type Notes: 1.) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23°C 2.) Suffix -N = NPN type, Suffix -P = PNP type 3.) The specified stable sensing distance is the range in which the sensor works reliably even in case of deviations in temperature or voltage 4.) When used at a power of 12 V, the product is less susceptible to the effects of internal self-heat generation and therefore a more stable repeat accuracy can be obtained 5.) The response frequency is an average value. 6.) Suffix -C5 = 5m cable / Suffix -J = Pigtail 0.3m with M12 connector / Suffix -Z = M12 connector type 7.) Standard sensing object = sheet steel, thickness: 1mm 8.) IO-Link type only integrated in Normally open and PNP types = GX-3MK-A-P IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories GX-300 DC 3-wire type (Non-shielded type, long sensing range) Type Model No. (note 2) Rated sensing distance Stable sensing distance (note 3) Standard sensing object (note 7) Hysteresis Supply voltage (note 4) Current consumption Control output Switching and communication line (C/Q) (note 8) Response Frequency (note 5) Protection Ambient temperature Dimension (HxWxD) Material Connection method (note 6) Normally Open Normally closed Communication specification Baud rate Process data Transmission cycle time Threaded type GX-308MLK-A- GX-312MLK-A- GX-318MLK-A- GX-330MLK-A- GX-308MLK-B- GX-312MLK-B- GX-318MLK-B- GX-330MLK-B- 4mm 8mm 16mm 30mm 0 to 3.2 mm 0 to 6.4 mm 0 to 12.8 mm 0 to 24 mm 12x12mm 24x24mm 48x48mm 90x90mm Max. 15% of measurement distance 10-30V DC ±10% (note1) max. 16mA PNP / NPN open-collector transistor, 200mA (note 2) IO-Link specification V1.1 COM3 (230.4kbit/s) PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE2_2) 0.4ms 1.5kHZ 1.kHz 0.5kHz 0.25kHz IP67 (IEC) -40 to +85°C M8x37.8mm M12x47.1mm M18x55.3mm M30x82.3mm Case: Nickel-plated brass [stainless steel (SUS303) for GX-308M(K)-], Sensing part: Polybutylene terephthalate (PBT) Cable, 2m or 5m; M12 connector type; pigtail type Notes: 1.) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23°C 2.) Suffix -N = NPN type, Suffix -P = PNP type 3.) The specified stable sensing distance is the range in which the sensor works reliably even in case of deviations in temperature or voltage 4.) When used at a power of 12 V, the product is less susceptible to the effects of internal self-heat generation and therefore a more stable repeat accuracy can be obtained 5.) The response frequency is an average value. 6.) Suffix -C5 = 5m cable / Suffix -J = Pigtail 0.3m with M12 connector / Suffix -Z = M12 connector type 7.) Standard sensing object = sheet steel, thickness: 1mm 8.) IO-Link type only integrated in Normally open and PNP types = GX-3MLK-A-P 102 INDUCTIVE PROXIMITY SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors GX-M Cylindrical inductive sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories 2- and 3-wire types The GX-M series consists of 2- and 3-wire types. The 3-wire type is available as a shielded or non-shielded type. The 2-wire type is available as a shielded type and long-range type (up to 15mm). Reduced wiring efforts and space-saving installation reduce costs. GX-M Various cylinder and thread types M8, M12, M18 and M30 types means the GX-M series can be used to solve a wide range of automation task. Space-saving, case-by-case integration in production lines, testing and manual work stations. Several connection possibilities You can connect the GX-M sensor with either a 2m cable or M12 plug-in connector. Special applications IP69K (DIN) and IP68 (IEC) types are also available, e.g. for use in machine systems, i.e. the food processing machinery. Typical applications Control drilling depth Detect how far press lowers Count parts Control position of components 103 Technical specifications 3-wire type Type Model no. Rated sensing distance (note 4) GX-M8 (-A/ -B)(-P) (-Z) (note 1,2,3) 1.5mm ±10% Shielded GX-M12 (-A/ -B) (-P)(-Z) GX-M18 (-A/ -B) (-P)(-Z) 2mm ±10% 5mm ±10% GX-M30 (-A/ -B) (-P)(-Z) 10mm ±10% GX-MK12 (-A/ -B) (-P)(-Z) 7mm ±10% Unshielded GX-MK18 (-A/ -B) (-P)(-Z) 12mm ±10% Stable sensing distance (note 5) 0 to 1.2mm 0 to 1.6mm 0 to 4mm 0 to 8mm 0 to 5.6mm 0 to 9.6mm Standard sensing object (note 6) 8x8mm 12x12mm 18x18mm 30x30mm 24x24mm 24x24mm Hysteresis Max. 15% of measurement distance Repeatability Along sensing axis: max. 5% of measurement distance Power supply 12 to 24VDC ±10% Output Open collector transistor max. 200mA (note 2) Output operation Normally closed (N.C.) or Normally open (N.O.) (note 1) Switching frequency 5kHz 5kHz 2kHz 1kHz 2.5kHz 1kHz Protection IP67 (IEC) IP69K (DIN), IP68 (IEC) 2m cable type; IP67 (IEC) M12 connector type Ambient temperature 25 to +70°C Material Enclosure: Brass (nickel plated), Sensing part: PPS (polyphenylsulfide) Connection method Cable, 2m or M12 plug-in connector type (note 3) Dimensions (ØxL) 2m cable M12 connector M8x33mm M8x45mm M12x35mm M12x50mm M18x39mm M18x50mm M30x43mm M30x55mm M12x55mm M12x66mm M18x60mm M18x72mm Accessories Nuts 2 pcs. Notes: 1.) Suffix-A = Normally open type, suffix B= Normally closed type; i.e. GX-M8B 2.) Suffix-P = PNP type, without suffix = NPN type; i.e. GX-M8B 3.) Without suffix = 2m cable, suffix -Z = M12 connector type; i.e. GX-M8B-P-Z 4.) The specified rated sensing distance refers to the standard sensing object 5.) The specified stable sensing distance is the range in which the sensor works reliably even in case of deviations in temperature or voltage 6.) Standard sensing object = sheet steel, thickness: 1mm GX-MK30 (-A/ -B) (-P)(-Z) 22mm ±10% 0 to 17.6mm 45x45mm 0.5kHz M30x63mm M30x74mm IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories GX-M 2-wire type Shielded Type Standard sensing distance Large sensing distance Model no. GX-M8(-A/-B)-U (note 1, 2) GX-M12(-A/-B)U (-Z) GX-M18(-A/-B)U (-Z) GX-M30(-A/-B)U (-Z) GX-ML8(-A/-B)-U GX-ML12(-A/-B)U (-Z) GX-ML18(-A/-B)U (-Z) GX-ML30 (-A/-B)U (-Z) Rated sensing distance (note 3) 1.5mm ±10% 2mm ±10% 5mm ±10% 10mm ±10% 2.5mm ±10% 4mm ±10% 8mm ±10% 15mm ±10% Stable sensing distance (note 4) 0 to 1.2mm 0 to 1.6mm 0 to 4mm 0 to 8mm 0 to 2mm 0 to 3.2mm 0 to 6.4mm 0 to 12mm Standard sensing object (note 5) 8x8mm 12x12mm 18x18mm 30x30mm 8x8mm 12x12mm 18x18mm 30x30mm Hysteresis Max. 15% of measurement distance Repeatability Along sensing axis: max. 5% of measurement distance Power supply 12 to 24VDC ±10% Output Non-contact DC 2-wire type, sink current 1.5 to 100mA, residual voltage max 4.2V (note 6) Output operation Normally closed (N.C.) or Normally open (N.O.) (note 1) Switching frequency 1kHz 1kHz 1.2kHz 1.3kHz 1.1kHz 1.3kHz 1.5kHz 0.8kHz Protection IP67 (IEC) IP69K (DIN), IP68 (IEC) 2m cable type; IP67 (IEC) M12 connector type Ambient temperature 25 to +70°C Material Enclosure: Brass (nickel plated), Sensing part: PPS (polyphenylsulfide) Connection method Cable, 2m Cable, 2m or M12 plug-in connector type (note 2) Cable, 2m Cable, 2m or M12 plug-in connector type (note 2) Dimensions (ØxL) 2m cable M12 connector M8x33mm M12x35mm M12x50mm M18x39mm M18x50mm M30x43mm M30x55mm M8x33mm M12x35mm M12x50mm M18x39mm M18x50mm M30x43mm M30x55mm Accessories Nuts 2 pcs. Notes: 1.) Suffix-A = Normally open type, suffix B= Normally closed type; i.e. GX-M8B-U 2.) Without suffix = 2m cable, suffix -Z = M12 connector type; i.e. GX-M8B-P-Z 3.) The specified rated sensing distance refers to the standard sensing object 4.) The specified stable sensing distance is the range in which the sensor works reliably even in case of temperature or voltage deviations 5.) Standard sensing object = sheet steel, thickness: 1mm 6.) If you extend the cable residual voltage may rise 104 INDUCTIVE PROXIMITY SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors GX-F/H Stable sensing of work pieces Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Environmental resistance This sensor has a long stable sensing range. It is easy to install. > IP68g protection: water and oil-resistant > Space-saving installation > A metal sleeve ensures a secure installation The new, integrated construction method improves environmenGX-F/H tal resistance performance. The LED indicators are easy to see A prism with a wide field of view has been developed, thereby greatly improving the visibility of the operation indicators. Stable detection > Large sensing range > Max. deviation at max. sensing range: ±8% > Max. deviation with temperature changes: ±8% Typical applications Checking up/down operation of compact molding equipment Sensing presence of metallic objects on a part feeder Positioning metal pallets Muting control with light curtains Shock resistance: 5000G Vibration resistance: 500Hz 105 Technical specifications Model no. Side sensing Top sensing Max. operating distance (note 4) Stable sensing distance (note 5) Standard sensing object (note 6) Repeatability GX-F6 (-A/ -B)(-I)(-P) (note 1,2,3) GX-H6 (-A/ -B)(-I)(-P) 1.6mm ±8% 0 to 1.3mm 12x12mm GX-F8 (-A/ -B)(-I)(-P) GX-H8 (-A/ -B)(-I)(-P) 2.5mm ±8% 0 to 2.1mm 15x15mm GX-F12 (-A/ -B)(-I)(-P) GX-H12 (-A/ -B)(-I)(-P) 4mm ±8% 0 to 3.3mm 20x20mm Min. 0.04mm GX-F15(-A/ -B)(-I)(-P) GX-H15 (-A/ -B)(-I)(-P) 5mm ±8% 0 to 4.2mm 20x20mm GX-FL15 (-A/ -B)(-I)(-P) GX-HL15 (-A/ -B)(-I)(-P) 8mm ±8% 0 to 6.7mm 30x30mm Interference prevention Alternate frequency (note 2) Power supply 12 to 24VDC +10% / 15% Output PNP / NPN open-collector transistor, 100mA (note 3) Output operation Normally closed (NC) or Normally open (NO) (note 1) Switching frequency 400Hz 500Hz 250Hz 150Hz Protection IP68 (IEC) Ambient temperature 25 to +70°C Material Enclosure: PBT, display: polyester Connection method Cable, 1m Dimensions (HxWxD) Side sensing Top sensing 6x6x24.5mm 6x6x25mm 7.4x8x23mm 8.2x8x25mm 7.1x12x27.8mm 12x12x27.4mm Notes: 1.) Suffix-A = Normally open type, suffix B= Normally closed type; i.e. GX-F6B 2.) Suffix-I = Alternate frequency type (interference prevention) i.e. GX-F6BI 3.) Without suffix = NPN type, P = PNP type; i.e. GX-F6BI-P 4.) The specified rated sensing distance refers to the standard sensing object 5.) The specified stable sensing distance is the range in which the sensor works reliably even in case of temperature or voltage deviations 6.) Standard sensing object = sheet steel, thickness: 1mm 8x15x31.5mm 16.5x15x29.5mm IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories GX-F/H 106 MEASUREMENT SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors HG-S Slim and robust contact measurement sensor Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories HG-S Larger measurement range The new sensor head HG-S1032 has a measurement range of 32mm with an indication accuracy of 3µm. All types are equipped with two plain bearings, one at the top and one at the bottom. The sensor can withstand more than 100 million sliding operations under application of lateral load (reference value). The two plain bearings increase the resistance to mechanical stress from the side and ensure the accuracy of measuring results even under lateral load. Lateral load is generated when the sensor is positioned at an angle or the workpiece becomes tilted. F Measurement of workpiece not securely held by the jig Lateral load F = Force Typical applications Coupling assembly inspection Transmission parts height measurement Spindle stopper aginst damage Even when a sudden upward thrust impact Spindle stopper occurs, the resulting load is applied only to the lower section of the sensor unit because a spindle stopper minimizes the impact on the glass scales. Additionally an alarm can be set to notify the user of an upward thrust (stroke) that exceeds the set level. This allows you to conduct a preventive maintenance before the sensor head generates a malfunction. Easy-to-understand 2-line digital display The 2-line digital display simultaneously shows head measurement (measured value) and judgment value (calculated value). The highcontrast LCD provides sharp and clear indications and offers a wide viewing angle. Secondary display line: Displays sensor head measurement and other data. Main display line: displays judgment value. 1.) Dual display for more flexibility 2.) Copy function from master to slave units Serial connection of up to 15 slave units One master unit can be connected in series with up to 15 slave units in any order. This allows easy multi-point calculations. End plates (optional) must be mounted on both sides of the controller after the connection of slave units. Flat screen flatness measurement 107 Technical specifications Sensor heads Type Model no. Measurement range Measuring force (note 2, note 3) Downward mount Upward mount Side mount Standard type HG-S1010 Max. 1.65N,1.1N (note 4) Max. 1.35N, 0.85N (note 4) Max. 1.5 N, 0.95N (note 4) General purpose Low measuring force type HG-S1010R Max. 0.35N, 0.3N (note 4) Max. 0.25N, 0.2N (note 4) NEW Air driven type Standard type HG-S1010-AC HG-S1110 10mm (note 1) 0.14 to 0.16 MPa Dependent on ap- plied pressure Max. 1.65N,1.1N (note 4) Max. 1.35N, 0.85N (note 4) Max. 1.5 N, 0.95N (note 4) High precision Low measuring force type HG-S1110R Max. 0.35N, 0.3N (note 4) Max. 0.25N, 0.2N (note 4) NEW Air driven type HG-S1110-AC 0.14 to 0.16 MPa Dependent on ap- plied pressure General purpose Standard type HG-S1032 32mm Max. 2.97N,1.90N (note 4) Max. 2.09N, 1.19N (note 4) Max. 2.53 N, 1.50N (note 4) Resolution 0.5µm 0.1µm 0.5µm Accuracy Full range: max. 2.0m Narrow range: max. 1.0m (any 60m) Full range: 2,0 m, Limited range: 1,0 m Full range: max. 1.0m Narrow range: max. 0.5m (any 60m) Full range: 1,0 m Limited range: 0,5 m Full range: max. 3.0 m Narrow range: max. 2.0m (any 60m) Protection IP67 (IEC, note 5) IP67 (IEC) (Note 8) IP67 (IEC, note 5) IP67 (IEC) (Note 8) IP67 (IEC, note 5) Ambient temperatur Material Connection method Body: zinc, holder: stainless steel; spindle: tool steel; probe (note 6): ceramic; rubber bellows: NBR (black) Body: zinc, holder: stainless steel, spindle: tool steel, probe (note 7): ce- ramic, Air tube clamp: S60CM -10 to +55°C Body: zinc, holder: stainless steel; spindle: tool steel; probe (note 6): ceramic; rubber bellows: NBR (black) Connector (note 7) Body: zinc, holder: stainless steel, spindle: tool steel, probe (note 7): ce- ramic, Air tube clamp: S60CM Body: zinc, holder: stainless steel; spindle: tool steel; probe (note 6): ceramic; rubber bellows: NBR (black) Dimensions (HxWxD) 135.5x11x18mm 125x11x18mm 135.5x11x18mm 125x11x18mm 217x17.5x27mm Notes: 1.) 5 to 10mm range when low measurement force type (HG-S1010R / HG-S1110R / HG-S1032) is mounted in upward mount 2.) Measured at an ambient temperature of +20°C 3.) In the case of low measuring force type (HG-S1010R / HG-S1110R), measurements were obtained with products in standard configuration without rubber bellows 4.) Typical value near center of measurement 5.) Excludes damage and deterioration to rubber bellows due to external causes 6.) Different probes (optional) are also available 7.) Please order sensor head connection cable seperately 8.) Seal Cap has to be applied Controllers Type Master unit Slave unit High-performance type Standard type Model no. NPN output PNP output HG-SC101 HG-SC101-P HG-SC111 HG-SC111-P HG-SC112 HG-SC112-P Supply voltage 24V DC ±10% (note1) Current consumption (note 2) Max. 70mA when sensor head is connected Response time 3ms, 5ms, 10ms, 100ms, 500ms, 1000ms switching type Control output NPN or PNP open collector transistor, max. 50 mA Analog output (note 3) 4-20mA Protection IP40 (IEC) Ambient temperature -10 to +50°C Dimension (HxWxD) 43.1x86x21.1mm Material Case: Polycarbonate, Cover: Polycarbonate, Switches: Polyacetal Connection method Cable, 2m Notes: 1.) Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20°C 2.) Current consumption does not include analog current output 3.) Linearity F.S. = 16 mA, and is linearity with respect to digitally measured values Sensor head connection cable Type Model no. CN-HS-C3 Straight connector CN-HS-C7 CN-HS-C7 CN-HS-C3L L-shaped connector CN-HS-C7L CN-HS-C20L IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories HG-S Length 3m 7m 20m 3m 7m 20m 108 MEASUREMENT SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors HG-C Reliable detection with repeatability of 10m Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Equipped with 0-5V analog output The sensor not only indicates measured values in mm, but also outputs analog voltage. The data can be used for various calculations and storage (logging) when the output is sent to a PLC + analog unit. Configurable external input The external input can be configured to perform one of four functions: "zero set", "teaching", "emission stop" and "selecting trigger function". Distance Distance Distance Teaching & window comparator mode HG-C 1-point teaching Set to Light-ON TEACH OFF Threshold ON Reference point Threshold OFF 2-point teaching TEACH TEACH Set to Light-ON OFF Threshold ON Threshold OFF 3-point teaching TEACH TEACH TEACH OFF ON OFF Set to Light-ON Ref. point 3 Threshold Ref. point 2 Threshold Ref. point 1 Object present Lower limit Upper limit Object A Object B Object C Perform 1-point teaching and the threshold range is set for the distance from the reference surface of the object to be detected. Press TEACH once for the lower (first point) and once for the upper limit (second point). This is useful for detecting objects at different distances. This is the method to set the threshold range by conducting the teaching at 3 points (detecting object A, B and C). After teaching, the reference points are automatically sorted in ascending order (reference point 1, 2 and 3). The thresholds are set at the midpoints between reference point 1 and 2, and 2 and 3, respectively. This is useful for detecting objects at different distances. Typical applications Measuring the hoop slack Checking for presence of O ring Controlling the height of a robot Controlling the dispenser head height 109 Technical specifications Measurement center type NPN output PNP output Applicable standards Sensing range Repeatability Linearity Beam diameter Supply voltage Control output Output operation Short circuit protection 30mm HG-C1030 HG-C1030-P 30±5mm 10m Approx. 50m Analog output Response time Degree of protection Ambient temperature Ambient humidity Ambient illumination Cable Material Dimensions (HxWxD) 50mm 100mm 200mm HG-C1050 HG-C1100 HG-C1200 HG-C1050-P HG-C1100-P HG-C1200-P Conforming to EMC Directive and FDA Standard 50±15mm 100±35mm 200mm ±80mm 30m 70m 200m ±0.1% F.S. ±0,2% F.S. Approx. 70m Approx. 120m Approx. 300m 12 to 24V DC ±10% PNP or NPN open-collector transistor Either Light-ON or Dark-ON Incorporated (auto-reset) Voltage output: 0 to 5V (at alarm: +5.2V). Load impedance: 100 Analog current output: Output range: 4 to 20mA (at alarm: 0mA) Output impedance: 300 or less 400mm HG-C1400 HG-C1400-P 400mm ±200mm 300m (200-400mm) 800m (400-600mm) ±0,2% F.S. (200-400mm) ±0,3% F.S. (400-600mm) Approx. 500m IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Switchable between high speed (1.5ms), standard (5ms), and high precision (10ms) HG-C IP67 (IEC) -10 to +45°C (no dew condensation or icing allowed), storage: -20 to +60°C 35 to 85% RH, at storage: 35 to 85% RH 3000x max. (Illumination level of light receiving surface under incandescent light) 5-core cable, 2m Enclosure: die-cast aluminum, front cover: acrylic 44x20x25mm 110 MEASUREMENT SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors HL-G1 Precision laser displacement sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories All-In-One Concept All processing electronics are incorporated in a robust sensor housing. All settings can be made directly on the sensor. A 7-segment LED-display makes it easy to configure sensor operation while checking displacement values. User-friendly The HL-G1 series can be operated directly, by touch terminal (GT02/GT12 series) or Windows software via RS-422/RS-485. Compact and lightweight body HL-G1 With its lightweight plastic body, weighing just 70g and dimensions of 20.4 x 60 x 57mm, it is easy to integrate the sensor in machines and production lines where space is tight. Extended product range With the extension of the HL-G1 series it is now possible to measure on specular surfaces with a high accuracy. Models with different measurement distances up to 82mm are available. Suitable applications can be for example in the semiconductor industry with specular wafer surfaces or other polished metal parts. Typical applications Control of dispenser height Dispenser Detection of aluminum wheel grooves HL-G1 Measuring sheet slack and thickness Measuring the eccentricity of a metal shaft 111 Technical specifications Standard type Type Model no. Sensing range Emission spot size Power supply Analog voltage output Response time Resolution Linearity Emitting element Output Protection Ambient temperature Material Connection method Dimensions (HxWxD) Accessories HL-G103-A-C5 30±4mm 0.1x0.1mm 0.5m Diffuse reflective type Specular reflective type HL-G105-A-C5 HL-G108-A-C5 HL-G112-A-C5 HL-G125-A-C5 HL-G103-RA-C5 HL-G105-RA-C5 HL-G-RA-C5 50±10mm 85±20mm 120±60mm 250±150mm 26.3±2mm 47.3±5mm 82.9±10mm 0.5x1mm 0.75x1.25mm 1.0x1.5mm 1.75x3.5mm 0.1x0.1mm 0.2x0.2mm 24V DC ±10% 0 to 10V / 4 to 20mA 200s, 500µs, 1ms, 2ms (selectable) 1.5m 2.5m 8m 20m 0.5m 1.5m 2.5m ±0.1%F.S. ±0.3%F.S. ±0.2%F.S. Red laser diode, 655nm (class 2) PNP or NPN open-collector transistor, max. 50mA (selection by wiring) IP67 (IEC) 10 to +45°C Enclosure: PBT / Front cover: Acrylic / Cable: PVC Cable, 5m 60x20.4x57mm Warning label (English): 1 set IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Multifunction type Type Diffuse reflective type Specular reflective type Model no. HL-G103-S-J HL-G105-S-J HL-G108-S-J HL-G112-S-J HL-G125-S-J HL-G103-RS-J HL-G105-RS-J HL-G108-RS-J Sensing range 30±4mm 50±10mm 85±20mm 120±60mm 250±150mm 26.3±2mm 47.3±5mm 82.9±10mm Emission spot size 0.1x0.1mm 0.5x1mm 0.75x1.25mm 1.0x1.5mm 1.75x3.5mm 0.1x0.1mm 0.2x0.2mm Power supply 24V DC ±10% Analog voltage output 0 to 10V / 4 to 20mA Interfaces RS-485 / RS-422 Response time 200s, 500µs, 1ms, 2ms (selectable) Resolution 0.5m 1.5m 2.5m 8m 20m 0.5m 1.5m 2.5m Linearity ±0.1%F.S. ±0.3%F.S. ±0.2%F.S. Emitting element Red laser diode, 655nm (class 2) Output PNP or NPN open-collector transistor, max. 50mA (selection by wiring) Protection IP67 (IEC) Ambient temperature 10 to +45°C Material Enclosure: PBT / Front cover: Acrylic / Cable: PVC Connection method Cable with connector, 0.5m (note) Dimensions (HxWxD) 60x20.4x57mm Accessories Warning label (English): 1 set Note: Cable is not included in delivery. Please select under accessories (page 129) HL-G1 112 MEASUREMENT SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Excellent basic performance Sampling rate 100kHz The HDLC-CMOS sensors were developed especially for the HL-C2 series. The high-resolution chip together with a very short processing time enables maximum resolution and speed. HL-C2 Resolution up to 0.01µm, linearity up to ±0.02%F.S. Superior resolution of 0.01µm. Linearity of ±0.02%F.S. enabled by latest high resolution lens technology. HL-C2 Ultra high-speed, precision laser displacement sensors Compact but with a wide array of functions You can connect two sensor heads and a variety of devices to the ultra compact controller. Measurement values can be analyzed and displayed while the sensors are being controlled. Typical applications Measurement of the position of patterned glass Control of the camera focus Measurement of the shape of a camshaft Measurement of the heights of chip parts 113 Specifications Sensor heads Measuring range Model no. Type Measuring range Resolution Laser class Beam size Linearity Dimensions (HxWxD) 10±1mm HL-C201F HL-C201FE HL-C201F-MK HL-C201FE-MK Small beam spot type Linear beam spot type 10±1 mm 0.01m 0.25m 0.01m 0.25m Class 1 Ø20m 20x700m ±0.02% F.S. 54x20x95mm 30±5mm HL-C203F HL-C203FE HL-C203F-MK HL-C203FE-MK Small beam spot type Linear beam spot type 30±5 mm (specular reflective mode 26.4±4.6mm) 0.025m 0.25m 0.025m 0.25m Class 2 Ø30m 30x1200m ±0.03% F.S 80x26x70mm Measuring range: Model no. Type Measuring range Resolution Laser class Beam size Linearity Dimensions 50±5mm 85±20mm HL-C205B HL-C205B-MK HL-C205C HL-C205C-MK HL-C208B HL-C208B-MK HL-C208C HL-C208C-MK (HL-C205BE, note 1) (HL-C205BE-MK, note 1) (HL-C205CE, note 1) (HL-C205CE-MK, note 1) (HL-C208BE, note 1) (HL-C208BE-MK, note 1) (HL-C208CE, note 1) (HL-C208CE-MK, note 1) Spot type Linear beam spot type Spot type Linear beam spot type Spot type Linear beam spot type Spot type Linear beam spot type 50±5mm (specular reflective mode 46±5mm) (note 2) 85±20 mm (specular reflective mode 81.4±6mm) ( note 2) 0.05m 0.15m Class 2 Class 3R Class 2 Class 3R Ø70m 70x1000m Ø70m 70x1000m Ø100m 100x1200m Ø100m 100x1200m ±0.03% F.S. ±0.03 % F.S. (specular reflective mode ±0.1 % F.S.) 90x26x74mm IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measuring range: Model no. Type Measuring range Resolution Laser class Beam size Linearity Dimensions 110±15mm HL-C211F HL-C211FE HL-C211F5 HL-C211F5E HL-C211F-MK HL-C211FE-MK HL-C211F5-MK HL-C211F5E-MK Spot type Linear beam spot type 110±15mm (specular reflective mode 106±14.7mm) (note 2) 0.1m 0.25m 0.1m 0.25m 0.1m 0.25m 0.1m 0.25m Class 2 Class 3R Class 2 Class 3R Ø80m Ø80x1700m ±0.03% F.S. 90x26x74mm Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Measuring range: Model no. Type Measuring range Resolution Laser class Beam size Linearity Dimensions HL-C235CE-W Spot type Ø400m 350±200mm HL-C235CE-WMK Linear beam spot type 350±200 mm 2m Class 3R 400x6500m ±0.04% F.S. (-200 to 0mm), ±0.08% F.S. (0 to +200mm) 90x26x74mm Notes: 1.) Models with a minimum resolution of 0.25m are subject to the Japanese export controls, defined in the "Foreign Exchange and Foreign Trade Act". This is not true for the model nos. in brackets if the laser heads are ordered in combination with a controller (i.e. HL-C2CE) 2.) If the light reflection in "specular reflective mode" is too high, please use the optional filter (HL-C2F01) HL-C2 Common technical data Emitting element Degree of protection Ambient temperature Material Connection method Red laser diode, 658nm IP67 (IEC) 0 to +45°C Enclosure: Die-cast aluminum / optical window: glass 0.5m cable with attached connector (extension cables, see page 129 (HL-G1CCJp) Controllers Type Model no. Supply voltage Analog output Output Inputs USB interface Serial input/output Current consumption Ambient temperature Material Connection method Dimensions (HxWxD) RS232C interface Ethernet interface NPN PNP NPN PNP NPN PNP NPN PNP High resolution Low resolution High resolution Low resolution HL-C2C HL-C2C-P HL-C2CE HL-C2CE-P HL-C21C HL-C21C-P HL-C21CE HL-C21CE-P 24V DC (±10%) ±5V/F.S., 4-20mA F.S. NPN or PNP open collector transistor, max 100mA Timing input, zero set, remote interlock, reset USB 2.0 RS232C (9.6-115.2kbps) With 1 sensor head: 350mA With 2 sensor heads: 500mA 0 to +50°C Polycarbonate Connector (sensors), terminal block 130x59x105.5mm 114 MEASUREMENT SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors HG-T Laser thru-beam sensor Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories High precision The laser thru-beam sensor of the HG-T series works with a beltshaped laser beam with a width of 10mm for measuring an area, e.g. for checking the contours of an edge. The sensor achieves a repeatability of > 1µm and has a linearity of less than ± 12µm over the whole measurement range. The thru-beam sensor has a sensing range of 500mm, which HG-T means that a larger variety of applications can be realized than with sensors with a shorter sensing range. Flexible mounting The HG-T series comes with two different sensor heads, which differ in their dimensions. The slim type receiver is 10mm less wide than the standard type and fits well into machines with very limited space. Optical features Thanks to functions like filters, edge detection, light intensity checks and averaging of measurement values (up to 1024), the measurements are very reliable. These functions help you to detect at an early stage when the measuring process does not run smoothly anymore and the system needs to be modified. Accumulation of foreign matters Increase the filter value! Value resulting from foreign matters Sensor heads Standard type: Emitter: 8x30x60mm (WxDxH) Receiver: 8x30x60mm (WxDxH) Slim type: Emitter: 8x30x60mm (WxDxH) Receiver: 8x20x60mm (WxDxH) Easy installation of multiple sensors The master-slave system makes it easy to connect up to 15 sensors in series. Another feature increasing ease-of-use is the possibility to copy settings from the master to the slave units. A LED indicates when copying is in progress. Receiver Circle meter Green (OK) / No unlit indicator segment Both beam axis adjustment indicators are ON. Emitter Static display 115 Typical applications Highly precise measuring and checking of web edges Measuring the flatness of glass sheets for transport Glass substrate positioning Measuring of diameters Shaft diameter measurement Technical specifications Sensor heads Type Model no. Measurement range (width of laser belt) Measurement range Repeatability Protection Ambient temperatur Material Connection method Dimensions (HxWxD) Standard type Slim type HG-T1010 HG-T1110 10mm 0 to 500mm max. 1m IP67 -10 to +45°C Housing: Die-cast aluminum, light emitting and receiving surfaces: Glass cable with connector 0.2m (connection cable not included) Emitter: 8x30x60mm Receiver: 8x30x60mm Emitter: 8x30x60mm Receiver: 8x20x60mm Controllers Type Model no. Supply voltage Current consumption (note ) Sampling cycle HG-TC101 Master unit HG-TC101-P HG-TC111 24V DC Slave units HG-TC111-P Max. 100mA (when sensor head is connected) 1ms (standard sampling) / 0.5ms (high-speed sampling) Control output NPN or PNP open collector transistor, max. 50 mA Analog output (note 3) 4 to 20mA, 0 to 5V (Switchable) Protection IP40 Ambient temperature -10 to +50°C Dimension (HxWxD) 43.1x21.1x86 Material Case: polycarbonate, cover: polycarbonate, keys: polyacetal Connection method Connector Notes: Current consumption does not include analog current output Sensor head connection cable The sensor head connection cable has to be ordered separately. Model No. Length CN-HT-C2 2m CN-HT-C5 5m HG-TC113 IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories HG-T 116 MEASUREMENT SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ultra high-speed response time of 25µs Ionizers/ Electrostatic Sensors Extremely low temperature deviations (0,07% F.S.°C) Accessories GP-X Predefined material characteristics The sensor exhibits ±0.3% F.S. linearity deviation when used on iron and stainless steel. Furthermore, characteristics for other materials are already programmed in the controller, making selection easy. Of course, the settings can also be customized. Serial interface The controller can be connected with a personal computer via an RS-232 interface. GP-XAiME, the software included, simplifies data visualization and analysis. Moreover, several systems can be combined and then easily configured at the same time. GP-X Eddy current analog sensor for high-speed sampling The 5-digit, dual, 2-color digital display offers great visibility If the measurement results fall within the setting range (GO), they will appear on the lower digital display in green. If they are out of setting range (HI, LO), they will be displayed in the upper digital display in orange. The display position and color change permit accurate visibility even for momentary changes. Out of setting range (upper threshold) (Orange) Sensing values within setting range (Green) Out of setting range (lower threshold) (Orange) Typical applications Stroke end sensing Eccentricity sensing Height sensing 117 Technical specifications Type Model no. NPN output PNP output GP-XC3SE (note 2) GP-XC3SEP Cylindrical heads GP-XC5SE GP-XC5SEP GP-XC8S GP-XC8SP GP-XC10M GP-XC10MP Heads with thread GP-XC12ML GP-XC12MLP GP-XC22KL GP-XC22KLP Sensing range 0 to 0.8mm 0 to 1mm 0 to 2mm 0 to 2mm 0 to 5mm 0 to 10mm Standard sensing object Stainless steel (SUS304) / Iron sheet, cold rolled carbon steel (SPCC) 60x60x1mm Power supply 24VDC ±10% Analog voltage output 5V to +5V (note 1) Sampling rate Resolution Output 40kHz (25µs) GP-XC3SE / GP-XC5SE: 0.04% F.S. (64 times average processing) GP-XC8S / GP-XC10M / GP-XC12ML / GP-XC22KL: 0.02% F.S. (64 times average processing) 3x NPN or PNP open-collector transistor, max. 100mA Protection Sensor head: IP67 (IEC) Ambient temperature Sensor head: 10 to +55°C, Controller: 0 to +50°C Material Sensor head: stainless steel (SUS303), GP-XC12MLp, GP-XC22KLp: brass (nickel plated), Switch part: PC Connection method Dimensions Sensor head (ØxD) Controller (HxWxD) 3.8x17mm Accessories Notes: 1.) Factory setting: 0 to +5V 2.) Model no. for one set (sensor head and controller) 5.4x17mm Terminal block 8x17mm M10x17mm 48x48x83mm Controller mounting frame, 1 pc. M12x21mm M12x35mm IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories GP-X 118 IONIZERS/ELECTROSTATIC SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Small dimensions Simple and space-saving installation on production lines and manual workstations. Accessories Adjustable A continuously variable adjuster ensures the production of the required air volume. ER-Q Unit for demanding industrial environments The LED displays the required maintenance steps or failures; this also can be queried via the outputs of a PLC. Parts for maintenance are easy to get at and replace. ER-Q Miniature ionizer with fan Technical specifications Type Model no. Charge removal time (±1000 ±100V) Discharge output voltage Ion balance Discharge method Power supply Power consumption Fan rotation speed Outputs Status indicator / Monitoring function Ambient temperature Ambient humidity Material Dimensions (HxWxD) Accessories Standard type ER-Q Approx. 1.5s ± 2kV Max. ± 10V High frequency AC method 24VDC ±10% Max. 200mA Continuously variable adjustable (potentiometer) ERROR and CHECK NPN open-collector transistor, max. 50mA Ready/Discharging (DSC/green), Discharge error (red), Fan error (blinking red) 0 to +50°C 35 to 65%RH Enclosure: PBT, Discharge electrode needles: tungsten 60x33x65mm I/O connector set manufactured by MOLEX, Inc.: Housing 5557-08P, terminal 5556T 119 ER-F IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Features Two types Low volume fan type. This type generates only the half of the air volume as the standard type, which is required for small components and thin film. Four different speeds can be selected for the fan. Fan speed (m/s) Fan speed (m/s) Standard fan type ER-F12 6.0 5.0 4.0 3.0 2.0 0.0 4 3 2 1 Fan levels Low-volume fan type ER-F12S 6.0 5.0 4.0 3.0 2.0 0.0 4 3 2 1 Fan levels Safety Sensors Easy maintenance Because the discharge electrode needle unit is attached to the louver, exchange or maintenance of the electrode needles is made easy without touching the main unit. A safe design: once the louver is removed, the high-voltage circuit is broken and the fan halts. Simply replace the louver to change configuration between long distance and wide area ionization. The two louvers come with the ionizer main body. Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories ER-F Straight louver removes charges at great distances Angled louver removes charges over wide area Neutralizes static charges quickly from Neutralizes static charges; wide area a great distance ionizer 120 IONIZERS/ELECTROSTATIC SENSORS IO-Link Technical specifications Sensors Photoelectric Sensors Type Fiber-optic Sensors Model no. Standard Fibers Discharge time (±1000 ±100V) Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Discharge output voltage Ion balance Discharge method Power supply Power consumption Fan rotation speed Output Input terminal Status indicators / Monitoring functions Ambient temperature Standard Low-volume fan ER-F12A ER-F12SA Approx. 1s Approx. 1.5s ±2kV Max. ±10V High-frequency AC 24VDC ±10% Max. 700mA Max. 400mA Adjustable at 4 levels ERROR, NPN open-collector transistor, max. 50mA Discharge stop = connected to 0V / Start= open Power supply (Power / green), Discharging (DSC / green), Discharge error (DSC red), Fan error (FAN red) 0 to +50°C Ambient humidity ER-F Material 35 to 65%RH Enclosure / Louver: ABS, Fitting of discharge electrode needles: PBT, Discharge electrode needles: tungsten, Mounting bracket: DC03 Dimensions (HxWxD) 166x161x60mm Accessories Note: The discharge electrode needle set is mounted at the louver Straight louver (note): 1 pc. Angle louver: 1 pc.; Caution label: 1 set; Rubber cushion: 1 pc. 121 ER-X Area ionizer for fast applications IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Features Quick charge removal Thanks to the pulse AC method, the ER-X series is well suited for high-speed applications as found in the packaging and semiconductor industries, where charge removal time is directly linked to productivity. In addition, discharge frequencies can be adjusted from between 1 and 100Hz, maximizing flexibility. Thanks to a built-in feedback system, the ionizer can even adjust the discharge frequency automatically during operation. Feedback system Individual displays for discharge, error messages and electrode needle control are provided on the controller. Furthermore, you can activate settings for frequency, ion balance or limits directly via a potentiometer and DIP switches. Airless operation The area ionizer of the ER-X series ionizers can be operated with or without air pressure. This technology opens up applications in fields such as the coating industry, as well as the production and packaging of microelectronic components that otherwise are blown around by whirling air. Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Flexible system configuration ER-X The system consists of a sensor head and a controller. The sensor head is available in different sizes. You can connect parallel up to 2 heads to the controller. This enlarges the working area of the system up to 1.2m. Typical applications Neutralization of foils Charge removal from ICs Charge removal from miniaturized electronic components 122 IONIZERS/ELECTROSTATIC SENSORS IO-Link Technical specifications Sensors Photoelectric Sensors Sensor heads Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Model no. Effective charge removal width Charge removal time (±1000 ±100V) Discharge output voltage Ion balance Discharge method Maximum air pressure Ambient temperature Ambient humidity Material Spot ER-X001 Spot type Max. 0.5s Accessories Controller Model no. ER-X Power supply Power consumption Outputs Status display / Monitor functions of discharge unit Ambient temperature Ambient humidity Material Dimensions (HxWxD) Accessories Area ER-X008 ER-X016 ER-X032 ER-X048 80mm 160mm 320mm 480mm Approx. 1s ±7kV Max. ±30V Pulse AC method 5bar (0.5MPa) 0 to +50°C 35 to 65%RH Enclosure: PPS, Stainless steel; Mounting bracket, Stainless steel; Electrode needle: tungsten ER-XC02 24V DC ±10% 1 head: max. 450mA; 2 heads: max. 800mA Alarm, Error; PhotoMOS, max. 50mA Discharge (DSC) 0 to +50°C 35 to 65%RH ABS 90x53x64mm MOLEX-plug (Housing 5557-10R, Terminal 5556TL) 1 pc., Ground wire 1pc. ER-X064 640mm Sensor head connector cables Model no. ER-XCCJ2H Image Length 2m Note: Cable is not included in delivery. Please order separately ER-XCCJ5H 5m ER-XCCJ10H 10m 123 ER-VW Nozzle angle adjustment IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Features Nozzle angle adjustment The angles of the two nozzles can be adjusted within a range of approximately 190° by screwing down the ends of the nozzles. Installation examples Vertical installation example Horizontal installation example Compact and ultrathin design The thickness of the unit is 18.9mm. Since the nozzle angles can be adjusted, they can be installed in tight spaces, such as when other equipment is present. Pressure & Flow Sensors Inductive Proximity Sensors Air supply monitoring function This function causes discharging to stop automatically if the sup- ply of air drops below a certain pressure. Notification of this is given when the AIR indicator Air supply Air supply lights up and the discharge output (DSC) turns off. This prevents objects which are not charged from being over- looked when the air supply has been stopped. Easy connection Discharge Discharge halt possible Measurement Sensors Ionizers/ Electrostatic Sensors Accessories ER-VW The joint kit (optional) can be used to connect up to a maximum of 5 ER-VW units. The air supply part is connected via quick connection joints, and the power supply and input//output signals can also be connected easily using connection cables with connectors at both ends. Multiple ER-VW units can be connected to provide charge removal layouts that suit the target equipment. Connection application example End connector Includes angle adjustment scale Minimum air consumption 15/min. The ER-VW series can utilize air flow levels starting from a minimum of 15 l/min. Because the amount of air consumed is so low, the loads placed on air supply equipment can be reduced. l Comparison of air consumption Minimum 100l/min. (ANR) Maximum 300l/min. (ANR) Previous spot type ER-VW 0 l Minimum 15l/min. (ANR) Maximum 60l/min. (ANR) 100 200 300 Air consumption l/min. (ANR) 21 21 1 2 Joint kit 1 Cable with connector on both ends Used to connect power supply, input / output and ground. 2 Air joint Used to supply air. 1 2 Cable with connector Air supply 124 IONIZERS / ELECTROSTATIC SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Functions to support accurate charge removal In addition to the air supply monitoring function, the ER-VW is equipped with the following functions to ensure accurate charge removal. Power supply POWER Discharge needle condition CHECK Air supply monitoring AIR Discharge DSC Abnormal discharge ERROR Pressure & Flow Sensors Inductive Proximity Sensors Typical applications Measurement Sensors Ionizers/ Electrostatic Sensors Charge removal of ICs Accessories Removing charge during pickup from dicing type Parallel discharging on two assembly lines Removing charges from LCD transport brackets ER-VW Technical specifications Type Model no. Charge removal time (±1000 ±100V) Discharge output voltage Ion balance Discharge method Power supply Power consumption Air pressure Inputs Outputs Status indicators / Monitoring functions Ambient temperature Ambient humidity Material Dimensions (HxWxD) Accessories Spot ER-VW Max. 1s ± 2kV Max. ±10V High frequency AC method 24VDC ±10% Max. 120mA 0.5 to 5bar (0.05 to 0.50MPa) Reset and discharge stop = connected to 0V / Start= open Discharging (DSC), ERROR and CHECK; NPN open collector transistor; max. 50mA Supply voltage (Power / green), Discharging (DSC / green), Checking electrode needles (Check / orange), Monitoring air pressur (Air / orange), Failure (Error / red) 0 to +55°C 35 to 65%RH Enclosure: ABS (nickel plated), nozzles / nozzle mount, Screws: stainless steel, Discharge electrode needles: tungsten 19x133x65mm Connector cable with 8 pins, 0.5m, Terminating plug with 9 pins, Ground wire 125 ER-V Ultra compact high-performance ionizer IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Features Produces excellent ion balance The adoption of high-frequency AC method allows extremely stable ion balance to be achieved. Because the ion balance is not affected by the pressure of air supplied or by the setup distance, no troublesome adjustments are required after setup. High performance but no controller needed A full range of functions have been provided with full consideration given to ease of use in the workplace. No separate controller is needed. Ultra compact design accurately removes charges of objects even from narrow spaces The main unit is merely 28x27x111.6mm so it can easily be combined with other devices and also be installed as an add-on. Furthermore, the high-voltage power supply is built-in so no extra space is required except for the ionizer itself. Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories ER-V Nozzle variations can be selected to suit the application Shower nozzle Straight bar nozzle Shape-preserving tube Conductive tube 28mm 27mm (With sho110w19em1rm.n6om(Mzzmalien aunttiat cohnleyd) ) It can be installed in places where the conventional bar type cannot so it can be placed closer to the object for more accurate charge removal. Typical applications CChharnggeerreemmoovvaallaanndd dust rreemmoovvaalloofflelennsseess PcPcirrirecrecvuvueietintnbtbtododaiasirscrdcdhhLaLaErErgDgDesesddaammaaggee iinn Charge removal glass surfaces 126 IONIZERS / ELECTROSTATIC SENSORS IO-Link Technical specifications Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Type Model no. Charge removal time (±1000 ±100V) Discharge output voltage Ion balance Discharge method Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Power supply Power consumption Maximum air pressure Inputs Outputs Status indicators / Monitoring functions Ambient temperature Ambient humidity Material Dimensions (HxWxD) ER-V Accessories Spot ER-VS02 Max. 1s ±2kV Max. ±10V High frequency AC method 24VDC ±10% Max. 70mA 0.5 to 7bar (0,05 to 0.7MPa) Reset and discharge stop = connected to 0V / Start= open Error (ERROR) and check (CHECK) NPN open-collector transistor, max. 50mA Supply voltage (Power / green), Discharging (DSC / green), Checking electrode needles (Check / orange), Error (Error / red) 0 to +55°C 35 to 65%RH Enclosure: PPS, Cover: stainless steel, Discharge electrode needles: tungsten 28x27x111.6mm I/O connector set manufactured by MOLEX, Inc.: Housing 5557-08P, terminal 5556TL Nozzles Type Model no. Shower nozzle ER-VAS Straight bar nozzle ER-VAB020 ER-VAB032 ER-VAB065 Tube nozzle adapter ER-VAJK Shape-preserving tube ER-VAK10 ER-VAK30 ER-VAK50 Conductive tube Tube nozzle adapter ER-VAJT-64 ER-AT50 Image Length Description Shower nozzle Effective charge removal length 200mm Effective charge removal length 320mm Effective charge removal length 650mm Straight bar nozzle containing a series of holes Note: Nozzles are not supplied with the ionizer main unit. Please order them separately. Tube nozzle adapter for main system and shapepreserving tube Tube length Tube length Tube length 112mm 312mm 512mm Bends easily and holds its bent shape so the tube does not need to be secured. (Minimum bending radius: 40mm) Tube nozzle adapter for main system and conduc- tive tube Tube length 500mm Flexible, free-cut (Minimum bending radius: 15mm) Cable with connector Model no. ER-VCCJ2 ER-VCCJ5 ER-VCCJ9 Image Length 2m 5m Net weight approx. 52g approx. 120g Description 0.15mm2 8-core cab tire cable with connector Cable outer diameter: Ø4.2mm Note: The cable with connector is not supplied with the ionizer main unit. Please order it separately. 9m approx. 240g 127 EC-G Pulse air-gun ionizer IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Features Direct ionized air emission from air gun With the new pulse air-gun ionizer operators can comfortably neutralize static electricity while manually cleaning. Pulsed ionized air Instant pulse air emission with high air pressure removes dust all at once. Its lightweight construction, ergonomic design and 2m cable make the air gun the perfect ionizer for manual jobs. White LED illumination A convenient white LED on the front of the gun illuminates target objects. Technical specifications Type Air gun type Model no. Charge removal time (±1000 ±100V) Discharge output voltage EC-G02 Average 0.5s ±1kV Ion balance Max. ±10V Discharge method High frequency AC method Power supply Input voltage: 100 to 240VAC, output voltage: 24VDC ±10% Power consumption Max. 30VA Maximum air pressure 0.5 to 5bar (0.05 to 0.50MPa) Input terminal Modes LED illumination mode Charge removal start = connected to 0V Pulse 1 (long) and Pulse 2 (short) / CONT (continuous) selectable by switch White LED Status indicator / Monitoring function Ambient temperature Valve illumination (orange) 0 to +50°C Ambient humidity 35 to 65% RH (no condensation allowed) Material Enclosure: ABS, Nozzle: Stainless steel, Nozzle guard: NBR, Discharge electrode needle: tungsten Weight approx. 270g Accessories AC adapter, 1 pc.; Exclusive intermediate cable, 2m; Straight joints to couple air tubes ø 8-8mm (note) and ø 8-6mm type, Connector connection terminal from MOLEX Note: Straight joint to couple air tubes, ø 8mm, is attached at shipment Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories EC-G Typical applications Remove charge and dust on PCB Remove charge and dust on flat screens Remove dust before painting 128 IONIZERS / ELECTROSTATIC SENSORS IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors EF-S1 Constant monitoring of static charges on production lines Safety Sensors Pressure & Flow Sensors Inductive Features Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Maintains and regulates product quality by preventing damage from static electric Static electricity that can build up in various places along a process line can be monitored constantly so that abnormalities can be prevented before they occur, ensuring quality. Reduces time for ionizer inspections EF-S1 The de-ionizing effectiveness of ionizers can be understood in real-time so that things such as ionizer damage and the replacement period for worn components can be checked objectively, reducing the time required for inspection and testing. Technical specifications Sensor head Type Spot type Model no. Measuring range EF-S1HS 8.0 to 20.5mm (±1kV) 21.0 to 100mm (±2kV) Controller Type Model no. Spot type EF-S1C Power supply Display range (Measurement range) Judgment output Analog voltage output 24VDC ±10% -1000 to 1000 (±1kV) -1999 to 1999 (±2kV) NPN open-collector transistor, max. 100mA Output voltage 1 to 5V Load impedance approx. 100 Typical applications Measuring surface potential when removing BG sheets Measuring static electric charge in lead frames Measuring frictional electrification of LCD modules Cables Picture ACCESSORIES 129 Description 4-pin M8 connector cable, 2m 4-pin M8 connector cable (elbow type 90°), 2m 4-pin M8 connector cable, 5m 4-pin M8 connector cable (elbow type 90°), 5m 4-pin M12 connector cable, 2m 4-pin M12 connector cable (elbow type 90°), 2m 4-pin M12 connector cable, 5m 4-pin M12 connector cable (elbow type 90°), 5m 4-wire cable with connector, 2m 4-wire cable with connector, 5m 3-wire cable with connector, 1m 3-wire cable with connector, 3m 3-wire main cable, 2m 3-wire main cable, 5m 1-wire sub cable, 2m 1-wire sub cable, 5m 4-wire main cable, 2m 4-wire main cable, 5m 2-wire sub cable, 2m 2-wire sub cable, 5m 14-wire connecting cable, 2m 14-wire connecting cable, 5m 14-wire cable, 10m 14-wire cable, 20m 14-wire cable, 2m 14-wire cable, 5m 14-wire cable, 10m 14-wire cable, 20m 14-wire cable, 30m Model no. UZZ80820D UZZ80821D UZZ80850D UZZ80851D UZZ81220D UZZ81221D UZZ81250D UZZ81251D Applicable sensors CX-4pZ,FX101pZ, FX102pZ, DP11pEPJ CX-4pZ, FX101pZ, FX102pZ, DP11pEPJ CX-4pZ,FX101pZ, FX102pZ, DP11pEPJ CX-4pZ,FX101PZ, FX102pZ, DP11pEPJ LX-101pZ, CX-4pZ, EQ-30, CY-1pZ, GX-Mp-Z LX-101pZ, CX-4pZ, EQ-30, CY-1pZ, GX-Mp-Z LX-101pZ, CX-4pZ, EQ-30, CY-1pZ, GX-Mp-Z LX-101pZ, CX-4pZ, EQ-30, CY-1pZ, GX-Mp-Z IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories CN14AC2 CN14AC5 CN13C1 CN13C3 CN73C2 CN73C5 CN71C2 CN71C5 CN74C2 CN74C5 CN72C2 CN72C5 HL-G1CCJ2 HL-G1CCJ5 HLG1CCJ10 HLG1CCJ20 HL-C2CCJ2 HL-C2CCJ5 HL-C2CCJ10 HL-C2CCJ20 HL-C2CCJ30 PM-p65, DP-100, DP-0 PM-p65, DP-100, DP-0 PM2 PM2 FX-301p, FX311, FX-5p1p, FX-CH2p, SC-GU-1-485 FX-301p, FX311, FX-5p1p, FX-CH2p, SC-GU-1-485 FX-301p, FX-311, FX-501p FX-301p, FX-311, FX-501p FX-305p, FX-502p, LS-401p, LS-501p FX-305p, FX-502p, LS-401p, LS-501p FX-305p, FX-502p, LS-401p, LS-501p FX-305p, FX-502p, LS-401p, LS-501p HL-G1p-S-J HL-G1p-S-J HL-G1p-S-J HL-G1p-S-J HL-C2p HL-C2p HL-C2p HL-C2p HL-C2p Cables 130 ACCESSORIES IO-Link Reflectors Sensors Photoelectric Sensors Picture Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Reflectors Description Reflection foil: 8x30mm, thickness 0.7mm Model no. RF11 Reflection foil: 25x30mm, thickness 0.7mm RF12 Reflection foil: 30x30mm, thickness 0.5mm RF13 Reflective area: 9.6x17.5mm RF200 Reflective area: 12.8x33.3mm RF210 Reflective area: 42.3x35.3mm RF220 Reflective area: 59.3x50.3mm RF230 Reflective area: 7x8mm RF310 Reflection foil: 27.8 x25.2mm RF33 Reflective area: 23x24mm RF330 Reflective area: 24x21mm RF-420 Reflective area: 50x47mm RF-410 Adhesive reflection tape: 22mm x 5m, thickness 0.4mm RF-40RL5 Applicable reflectors CX-400, EX-20, NX5 CX-400, EX-20, NX5 CX-400 EX-20 CX-400, EX-L200, NX5 CX-400, NX5 CX-400, LS-H92p, NX5 LS LS EX-L200, LS-H91p, LS-H901 CY-100 CY-100 CY-100 Mounting brackets Picture Description L-shaped mounting bracket Model no. MS-EXL2-1 Mounting plate MSLX1 Mounting bracket MSCX1 Mounting bracket MSCX21 Mounting bracket MSNX51 Mounting bracket MS-EXZ-2 Mounting bracket MS-EXZ-2 Mounting bracket MSEX101 Mounting bracket MSEX201 Mounting bracket MSEX202 Mounting set, 4 mounting brackets M4(l=15mm) 4pcs., M4 (l=18mm) 8pcs. MSNA11 Mounting bracket MSEQ501 Mounting bracket MSEQ31 Mounting bracket MSDIN4 Mounting bracket MSDIN2 Mounting bracket MS-FM2-1 Mounting bracket MSDP11 Mounting bracket MS-DP1-6 Mountig bracket, stainless steel MS-CY1-1 Mounting bracket for beam axis alignment, plastic MS-CY1-2 131 Applicable reflectors EX-L200, LS-H102 LX-100 CX-400, LS-400 CX-400 NX5 EX-Z Top sensing EX-Z Side sensing EX-10 EX-20 Top sensing EX-20 Side sensing NA1-11 EQ-500 EQ-30 FX-100 FX-300, FX-500 FM-200 DP-100, DP-0 DPC-100, DPC-L100 CY-100 CY-100 IO-Link Sensors Photoelectric Sensors Fiber-optic Sensors Standard Fibers Fiber Sensors Communication Units Mark Sensors Laser Sensors Safety Sensors Pressure & Flow Sensors Inductive Proximity Sensors Measurement Sensors Ionizers/ Electrostatic Sensors Accessories Mounting brackets Global Network Global Network North America Europe Asia Pacific China Japan Panasonic Electric Works Please contact our Global Sales Companies in: Europe Headquarters Austria Panasonic Electric Works Europe AG Panasonic Industry Austria GmbH Benelux Czech Republic France Germany Hungary Panasonic Industrial Devices Materials Europe GmbH Panasonic Electric Works Sales Western Europe B.V. Panasonic Electric Works Europe AG, organizacní slozka Panasonic Electric Works Sales Western Europe B.V. Panasonic Electric Works Europe AG Panasonic Electric Works Europe AG Ireland Italy Panasonic Electric Works UK Ltd. Panasonic Industry Italia srl Nordic Countries Panasonic Electric Works Europe AG Panasonic Fire & Security Europe AB Poland Panasonic Industry Poland sp. z o.o. Spain Panasonic Industry Iberia S.A. Switzerland Panasonic Industry Switzerland AG United Kingdom Panasonic Electric Works UK Ltd. Caroline-Herschel-Strasse 100, 85521 Ottobrunn, Tel. +49 89 45354-1000, Fax +49 89 45354-1550, www.panasonic-electric-works.com Josef Madersperger Str. 2, 2362 Biedermannsdorf, Tel. +43 (0) 2236-26846, Fax +43 (0) 2236-46133 www.panasonic-electric-works.at Ennshafenstraße 30, 4470 Enns, Tel. +43 (0) 7223 883, Fax +43 (0) 7223 88333, www.panasonic-electronic-materials.com De Rijn 4, 5684 PJ Best, Netherlands, Tel. +31 (0) 499 372727, www.panasonic-electric-works.nl Administrative centre PLATINIUM, Veveí 3163/111, 616 00 Brno, Tel. +420 541 217 001, Fax +420 541 217 101, www.panasonic-electric-works.cz Succursale française, 10, rue des petits ruisseaux, 91370 Verrières Le Buisson, Tél. +33 (0) 1 6013 5757, Fax +33 (0) 1 6013 5758, www.panasonic-electric-works.fr Caroline-Herschel-Strasse 100, 85521 Ottobrunn, Tel. +49 89 45354-1000, Fax +49 89 45354-2111, www.panasonic-electric-works.de Magyarországi Fióktelepe, 1117 Budapest, Alíz utca 4, Tel. +43 (0) 2236 26846 -25, Fax +43 (0) 2236 46133 www.panasonic-electric-works.hu Irish Branch Office, Dublin, Tel. +353 (0) 14600969, Fax +353 (0) 14601131, www.panasonic-electric-works.co.uk Via del Commercio 3-5 (Z.I. Ferlina), 37012 Bussolengo (VR), Tel. +39 0456752711, Fax +39 0456700444, www.panasonic-electric-works.it Filial Nordic, Knarrarnäsgatan 15, 164 40 Kista, Sweden, Tel. +46 859476680, Fax +46 859476690, www.panasonic-electric-works.se Jungmansgatan 12, 21119 Malmö, Tel. +46 40 697 7000, Fax +46 40 697 7099, www.panasonic-fire-security.com Ul. Dowborczyków 25, 90-019 Lód, Polska, Tel. +48 42 2309633, www.panasonic-electric-works.pl Barajas Park, San Severo 20, 28042 Madrid, Tel. +34 913293875, Fax +34 913292976, www.panasonic-electric-works.es Grundstrasse 8, 6343 Rotkreuz, Tel. +41 (0) 41 7997050, Fax +41 (0) 41 7997055, www.panasonic-electric-works.ch Sunrise Parkway, Linford Wood, Milton Keynes, MK14 6 LF, Tel. +44 (0) 1908 231555, Fax +44 (0) 1908 231599, www.panasonic-electric-works.co.uk North & South America USA Panasonic Industrial Devices Sales Company Two Riverfront Plaza, 7th Floor, Newark, NJ 07102-5490, Tel. 1-8003-442-112, www.pewa.panasonic.com of America Asia Pacific / China / Japan China Hong Kong Japan Singapore Panasonic Electric Works Sales (China) Co. Ltd. Panasonic Industrial Devices Sales (HK) Co., Ltd. Panasonic Corporation Panasonic Industrial Devices Automation Controls Sales Asia Pacific Tower C 3rd Floor, Office Park, NO.5 Jinghua South Street, Chaoyang District, Beijing 100020, Tel. +86-10-5925-5988, Fax +86-10-5925-5980 Suite 301, 3/F, Chinachem Golden Plaza, 77 Mody Road, TST East, Kowloon, Hong Kong, Tel. +852-2529-3956, Fax +852-2528-6991 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8501, Japan, Tel. +81-6-6908-1121, www.panasonic.net No.3 Bedok South Road, Singapore 469269, Tel. +65-6299-9181, Fax +65-6390-3953 Copyright © 2021 · Printed in Germany 3174 euen 07/21Adobe PDF Library 15.0 Adobe InDesign 16.2 (Windows)